The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/adwlib.h

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*      $NetBSD: adwlib.h,v 1.19 2005/12/11 12:21:25 christos Exp $        */
    2 
    3 /*
    4  * Definitions for low level routines and data structures
    5  * for the Advanced Systems Inc. SCSI controllers chips.
    6  *
    7  * Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc.
    8  * All rights reserved.
    9  *
   10  * Author: Baldassare Dante Profeta <dante@mclink.it>
   11  *
   12  * Redistribution and use in source and binary forms, with or without
   13  * modification, are permitted provided that the following conditions
   14  * are met:
   15  * 1. Redistributions of source code must retain the above copyright
   16  *    notice, this list of conditions and the following disclaimer.
   17  * 2. Redistributions in binary form must reproduce the above copyright
   18  *    notice, this list of conditions and the following disclaimer in the
   19  *    documentation and/or other materials provided with the distribution.
   20  * 3. All advertising materials mentioning features or use of this software
   21  *    must display the following acknowledgement:
   22  *        This product includes software developed by the NetBSD
   23  *        Foundation, Inc. and its contributors.
   24  * 4. Neither the name of The NetBSD Foundation nor the names of its
   25  *    contributors may be used to endorse or promote products derived
   26  *    from this software without specific prior written permission.
   27  *
   28  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
   29  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
   30  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
   31  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
   32  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
   33  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
   34  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
   35  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
   36  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
   37  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
   38  * POSSIBILITY OF SUCH DAMAGE.
   39  */
   40 /*
   41  * Ported from:
   42  */
   43 /*
   44  * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters
   45  *
   46  * Copyright (c) 1995-2000 Advanced System Products, Inc.
   47  * All Rights Reserved.
   48  *
   49  * Redistribution and use in source and binary forms, with or without
   50  * modification, are permitted provided that redistributions of source
   51  * code retain the above copyright notice and this comment without
   52  * modification.
   53  */
   54 
   55 #ifndef _ADVANSYS_WIDE_LIBRARY_H_
   56 #define _ADVANSYS_WIDE_LIBRARY_H_
   57 
   58 
   59 /*
   60  * --- Adw Library Constants and Macros
   61  */
   62 
   63 #define ADW_LIB_VERSION_MAJOR   5
   64 #define ADW_LIB_VERSION_MINOR   8
   65 
   66 
   67 /* If the result wraps when calculating tenths, return 0. */
   68 #define ADW_TENTHS(num, den) \
   69         (((10 * ((num)/(den))) > (((num) * 10)/(den))) ? \
   70         0 : ((((num) * 10)/(den)) - (10 * ((num)/(den)))))
   71 
   72 
   73 /*
   74  * Define Adw Reset Hold Time grater than 25 uSec.
   75  * See AdwResetSCSIBus() for more info.
   76  */
   77 #define ASC_SCSI_RESET_HOLD_TIME_US  60
   78 
   79 /*
   80  * Define Adw EEPROM constants.
   81  */
   82 
   83 #define ASC_EEP_DVC_CFG_BEGIN           (0x00)
   84 #define ASC_EEP_DVC_CFG_END             (0x15)
   85 #define ASC_EEP_DVC_CTL_BEGIN           (0x16)  /* location of OEM name */
   86 #define ASC_EEP_MAX_WORD_ADDR           (0x1E)
   87 
   88 #define ASC_EEP_DELAY_MS                100
   89 
   90 /*
   91  * EEPROM bits reference by the RISC after initialization.
   92  */
   93 #define ADW_EEPROM_BIG_ENDIAN          0x8000   /* EEPROM Bit 15 */
   94 #define ADW_EEPROM_BIOS_ENABLE         0x4000   /* EEPROM Bit 14 */
   95 #define ADW_EEPROM_TERM_POL            0x2000   /* EEPROM Bit 13 */
   96 
   97 /*
   98  * EEPROM configuration format
   99  *
  100  * Field naming convention:
  101  *
  102  *  *_enable indicates the field enables or disables the feature. The
  103  *  value is never reset.
  104  *
  105  *  *_able indicates both whether a feature should be enabled or disabled
  106  *  and whether a device isi capable of the feature. At initialization
  107  *  this field may be set, but later if a device is found to be incapable
  108  *  of the feature, the field is cleared.
  109  *
  110  * Default values are maintained in the structure Default_EEPROM_Config.
  111  */
  112 #define ADV_EEPROM_BIG_ENDIAN          0x8000   /* EEPROM Bit 15 */
  113 #define ADV_EEPROM_BIOS_ENABLE         0x4000   /* EEPROM Bit 14 */
  114 /*
  115  * For the ASC3550 Bit 13 is Termination Polarity control bit.
  116  * For later ICs Bit 13 controls whether the CIS (Card Information
  117  * Service Section) is loaded from EEPROM.
  118  */
  119 #define ADV_EEPROM_TERM_POL            0x2000   /* EEPROM Bit 13 */
  120 #define ADV_EEPROM_CIS_LD              0x2000   /* EEPROM Bit 13 */
  121 
  122 /*
  123  * ASC38C1600 Bit 11
  124  *
  125  * If EEPROM Bit 11 is 0 for Function 0, then Function 0 will specify
  126  * INT A in the PCI Configuration Space Int Pin field. If it is 1, then
  127  * Function 0 will specify INT B.
  128  *
  129  * If EEPROM Bit 11 is 0 for Function 1, then Function 1 will specify
  130  * INT B in the PCI Configuration Space Int Pin field. If it is 1, then
  131  * Function 1 will specify INT A.
  132  */
  133 #define ADW_EEPROM_INTAB               0x0800   /* EEPROM Bit 11 */
  134 
  135 typedef struct adw_eeprom
  136 {
  137                                                 /* Word Offset, Description */
  138 
  139         u_int16_t       cfg_lsw;                /* 00 power up initialization */
  140                                                 /*  bit 13 set - Term Polarity Control */
  141                                                 /*  bit 14 set - BIOS Enable */
  142                                                 /*  bit 15 set - Big Endian Mode */
  143         u_int16_t       cfg_msw;                /* 01 unused    */
  144         u_int16_t       disc_enable;            /* 02 disconnect enable */
  145         u_int16_t       wdtr_able;              /* 03 Wide DTR able */
  146         union {
  147                 u_int16_t       sdtr_able;      /* 04 Synchronous DTR able */
  148                 u_int16_t       sdtr_speed1;    /* 04 SDTR Speed TID 0-3 */
  149         } sdtr1;
  150         u_int16_t       start_motor;            /* 05 send start up motor */
  151         u_int16_t       tagqng_able;            /* 06 tag queuing able */
  152         u_int16_t       bios_scan;              /* 07 BIOS device control */
  153         u_int16_t       scam_tolerant;          /* 08 no scam */
  154 
  155         u_int8_t        adapter_scsi_id;        /* 09 Host Adapter ID */
  156         u_int8_t        bios_boot_delay;        /*    power up wait */
  157 
  158         u_int8_t        scsi_reset_delay;       /* 10 reset delay */
  159         u_int8_t        bios_id_lun;            /*    first boot device scsi id & lun */
  160                                                 /*    high nibble is lun */
  161                                                 /*    low nibble is scsi id */
  162 
  163         u_int8_t        termination_se;         /* 11 0 - automatic */
  164                                                 /*    1 - low off / high off */
  165                                                 /*    2 - low off / high on */
  166                                                 /*    3 - low on  / high on */
  167                                                 /*    There is no low on  / high off */
  168 
  169         u_int8_t        termination_lvd;        /* 11 0 - automatic */
  170                                                 /*    1 - low off / high off */
  171                                                 /*    2 - low off / high on */
  172                                                 /*    3 - low on  / high on */
  173                                                 /*    There is no low on  / high off */
  174 
  175         u_int16_t       bios_ctrl;              /* 12 BIOS control bits */
  176                                                           /*  bit 0  BIOS don't act as initiator. */
  177                                                 /*  bit 1  BIOS > 1 GB support */
  178                                                 /*  bit 2  BIOS > 2 Disk Support */
  179                                                 /*  bit 3  BIOS don't support removables */
  180                                                 /*  bit 4  BIOS support bootable CD */
  181                                                 /*  bit 5  BIOS scan enabled */
  182                                                 /*  bit 6  BIOS support multiple LUNs */
  183                                                 /*  bit 7  BIOS display of message */
  184                                                 /*  bit 8  SCAM disabled */
  185                                                 /*  bit 9  Reset SCSI bus during init. */
  186                                                 /*  bit 10 */
  187                                                 /*  bit 11 No verbose initialization. */
  188                                                 /*  bit 12 SCSI parity enabled */
  189                                                 /*  bit 13 */
  190                                                 /*  bit 14 */
  191                                                 /*  bit 15 */
  192         union {
  193                 u_int16_t       ultra_able;     /* 13 ULTRA speed able */
  194                 u_int16_t       sdtr_speed2;    /* 13 SDTR speed TID 4-7 */
  195         } sdtr2;
  196         union {
  197                 u_int16_t       reserved2;      /* 14 reserved */
  198                 u_int16_t       sdtr_speed3;    /* 14 SDTR speed TID 8-11 */
  199         } sdtr3;
  200         u_int8_t        max_host_qng;           /* 15 maximum host queuing */
  201         u_int8_t        max_dvc_qng;            /*    maximum per device queuing */
  202         u_int16_t       dvc_cntl;               /* 16 control bit for driver */
  203         union {
  204                 u_int16_t       bug_fix;        /* 17 control bit for bug fix */
  205                 u_int16_t       sdtr_speed4;    /* 17 SDTR speed 4 TID 12-15 */
  206         } sdtr4;
  207         u_int16_t       serial_number[3];       /* 18 - 20 Board serial number */
  208         u_int16_t       check_sum;              /* 21 EEP check sum */
  209         u_int8_t        oem_name[16];           /* 22 OEM name */
  210         u_int16_t       dvc_err_code;           /* 30 last device driver error code */
  211         u_int16_t       adv_err_code;           /* 31 last uc and Adw Lib error code */
  212         u_int16_t       adv_err_addr;           /* 32 last uc error address */
  213         u_int16_t       saved_dvc_err_code;     /* 33 saved last dev. driver error code */
  214         u_int16_t       saved_adv_err_code;     /* 34 saved last uc and Adw Lib error code */
  215         u_int16_t       saved_adv_err_addr;     /* 35 saved last uc error address       */
  216         u_int16_t       reserved1[20];          /* 36 - 55 reserved */
  217         u_int16_t       cisptr_lsw;             /* 56 CIS PTR LSW */
  218         u_int16_t       cisprt_msw;             /* 57 CIS PTR MSW */
  219         u_int16_t       subsysvid;              /* 58 SubSystem Vendor ID */
  220         u_int16_t       subsysid;               /* 59 SubSystem ID */
  221         u_int16_t       reserved2[4];           /* 60 - 63 reserved */
  222 } ADW_EEPROM;
  223 
  224 
  225 /*
  226  * EEPROM Commands
  227  */
  228 #define ASC_EEP_CMD_READ          0x80
  229 #define ASC_EEP_CMD_WRITE         0x40
  230 #define ASC_EEP_CMD_WRITE_ABLE    0x30
  231 #define ASC_EEP_CMD_WRITE_DISABLE 0x00
  232 
  233 #define ASC_EEP_CMD_DONE             0x0200
  234 #define ASC_EEP_CMD_DONE_ERR         0x0001
  235 
  236 /* cfg_word */
  237 #define EEP_CFG_WORD_BIG_ENDIAN      0x8000
  238 
  239 /* bios_ctrl */
  240 #define BIOS_CTRL_BIOS               0x0001
  241 #define BIOS_CTRL_EXTENDED_XLAT      0x0002
  242 #define BIOS_CTRL_GT_2_DISK          0x0004
  243 #define BIOS_CTRL_BIOS_REMOVABLE     0x0008
  244 #define BIOS_CTRL_BOOTABLE_CD        0x0010
  245 #define BIOS_CTRL_MULTIPLE_LUN       0x0040
  246 #define BIOS_CTRL_DISPLAY_MSG        0x0080
  247 #define BIOS_CTRL_NO_SCAM            0x0100
  248 #define BIOS_CTRL_RESET_SCSI_BUS     0x0200
  249 #define BIOS_CTRL_INIT_VERBOSE       0x0800
  250 #define BIOS_CTRL_SCSI_PARITY        0x1000
  251 #define BIOS_CTRL_AIPP_DIS           0x2000
  252 
  253 #define ADW_3550_MEMSIZE             0x2000     /* 8 KB Internal Memory */
  254 #define ADW_3550_IOLEN               0x40       /* I/O Port Range in bytes */
  255 
  256 #define ADW_38C0800_MEMSIZE          0x4000     /* 16 KB Internal Memory */
  257 #define ADW_38C0800_IOLEN            0x100      /* I/O Port Range in bytes */
  258 
  259 #define ADW_38C1600_MEMSIZE          0x8000     /* 32 KB Internal Memory */
  260 #define ADW_38C1600_IOLEN            0x100      /* I/O Port Range 256 bytes */
  261 #define ADW_38C1600_MEMLEN           0x1000     /* Memory Range 4KB bytes */
  262 
  263 /*
  264  * Byte I/O register address from base of 'iop_base'.
  265  */
  266 #define IOPB_INTR_STATUS_REG    0x00
  267 #define IOPB_CHIP_ID_1          0x01
  268 #define IOPB_INTR_ENABLES       0x02
  269 #define IOPB_CHIP_TYPE_REV      0x03
  270 #define IOPB_RES_ADDR_4         0x04
  271 #define IOPB_RES_ADDR_5         0x05
  272 #define IOPB_RAM_DATA           0x06
  273 #define IOPB_RES_ADDR_7         0x07
  274 #define IOPB_FLAG_REG           0x08
  275 #define IOPB_RES_ADDR_9         0x09
  276 #define IOPB_RISC_CSR           0x0A
  277 #define IOPB_RES_ADDR_B         0x0B
  278 #define IOPB_RES_ADDR_C         0x0C
  279 #define IOPB_RES_ADDR_D         0x0D
  280 #define IOPB_SOFT_OVER_WR       0x0E
  281 #define IOPB_RES_ADDR_F         0x0F
  282 #define IOPB_MEM_CFG            0x10
  283 #define IOPB_RES_ADDR_11        0x11
  284 #define IOPB_GPIO_DATA          0x12
  285 #define IOPB_RES_ADDR_13        0x13
  286 #define IOPB_FLASH_PAGE         0x14
  287 #define IOPB_RES_ADDR_15        0x15
  288 #define IOPB_GPIO_CNTL          0x16
  289 #define IOPB_RES_ADDR_17        0x17
  290 #define IOPB_FLASH_DATA         0x18
  291 #define IOPB_RES_ADDR_19        0x19
  292 #define IOPB_RES_ADDR_1A        0x1A
  293 #define IOPB_RES_ADDR_1B        0x1B
  294 #define IOPB_RES_ADDR_1C        0x1C
  295 #define IOPB_RES_ADDR_1D        0x1D
  296 #define IOPB_RES_ADDR_1E        0x1E
  297 #define IOPB_RES_ADDR_1F        0x1F
  298 #define IOPB_DMA_CFG0           0x20
  299 #define IOPB_DMA_CFG1           0x21
  300 #define IOPB_TICKLE             0x22
  301 #define IOPB_DMA_REG_WR         0x23
  302 #define IOPB_SDMA_STATUS        0x24
  303 #define IOPB_SCSI_BYTE_CNT      0x25
  304 #define IOPB_HOST_BYTE_CNT      0x26
  305 #define IOPB_BYTE_LEFT_TO_XFER  0x27
  306 #define IOPB_BYTE_TO_XFER_0     0x28
  307 #define IOPB_BYTE_TO_XFER_1     0x29
  308 #define IOPB_BYTE_TO_XFER_2     0x2A
  309 #define IOPB_BYTE_TO_XFER_3     0x2B
  310 #define IOPB_ACC_GRP            0x2C
  311 #define IOPB_RES_ADDR_2D        0x2D
  312 #define IOPB_DEV_ID             0x2E
  313 #define IOPB_RES_ADDR_2F        0x2F
  314 #define IOPB_SCSI_DATA          0x30
  315 #define IOPB_RES_ADDR_31        0x31
  316 #define IOPB_RES_ADDR_32        0x32
  317 #define IOPB_SCSI_DATA_HSHK     0x33
  318 #define IOPB_SCSI_CTRL          0x34
  319 #define IOPB_RES_ADDR_35        0x35
  320 #define IOPB_RES_ADDR_36        0x36
  321 #define IOPB_RES_ADDR_37        0x37
  322 #define IOPB_RAM_BIST           0x38
  323 #define IOPB_PLL_TEST           0x39
  324 #define IOPB_PCI_INT_CFG        0x3A
  325 #define IOPB_RES_ADDR_3B        0x3B
  326 #define IOPB_RFIFO_CNT          0x3C
  327 #define IOPB_RES_ADDR_3D        0x3D
  328 #define IOPB_RES_ADDR_3E        0x3E
  329 #define IOPB_RES_ADDR_3F        0x3F
  330 
  331 /*
  332  * Word I/O register address from base of 'iop_base'.
  333  */
  334 #define IOPW_CHIP_ID_0          0x00  /* CID0  */
  335 #define IOPW_CTRL_REG           0x02  /* CC    */
  336 #define IOPW_RAM_ADDR           0x04  /* LA    */
  337 #define IOPW_RAM_DATA           0x06  /* LD    */
  338 #define IOPW_RES_ADDR_08        0x08
  339 #define IOPW_RISC_CSR           0x0A  /* CSR   */
  340 #define IOPW_SCSI_CFG0          0x0C  /* CFG0  */
  341 #define IOPW_SCSI_CFG1          0x0E  /* CFG1  */
  342 #define IOPW_RES_ADDR_10        0x10
  343 #define IOPW_SEL_MASK           0x12  /* SM    */
  344 #define IOPW_RES_ADDR_14        0x14
  345 #define IOPW_FLASH_ADDR         0x16  /* FA    */
  346 #define IOPW_RES_ADDR_18        0x18
  347 #define IOPW_EE_CMD             0x1A  /* EC    */
  348 #define IOPW_EE_DATA            0x1C  /* ED    */
  349 #define IOPW_SFIFO_CNT          0x1E  /* SFC   */
  350 #define IOPW_RES_ADDR_20        0x20
  351 #define IOPW_Q_BASE             0x22  /* QB    */
  352 #define IOPW_QP                 0x24  /* QP    */
  353 #define IOPW_IX                 0x26  /* IX    */
  354 #define IOPW_SP                 0x28  /* SP    */
  355 #define IOPW_PC                 0x2A  /* PC    */
  356 #define IOPW_RES_ADDR_2C        0x2C
  357 #define IOPW_RES_ADDR_2E        0x2E
  358 #define IOPW_SCSI_DATA          0x30  /* SD    */
  359 #define IOPW_SCSI_DATA_HSHK     0x32  /* SDH   */
  360 #define IOPW_SCSI_CTRL          0x34  /* SC    */
  361 #define IOPW_HSHK_CFG           0x36  /* HCFG  */
  362 #define IOPW_SXFR_STATUS        0x36  /* SXS   */
  363 #define IOPW_SXFR_CNTL          0x38  /* SXL   */
  364 #define IOPW_SXFR_CNTH          0x3A  /* SXH   */
  365 #define IOPW_RES_ADDR_3C        0x3C
  366 #define IOPW_RFIFO_DATA         0x3E  /* RFD   */
  367 
  368 /*
  369  * Doubleword I/O register address from base of 'iop_base'.
  370  */
  371 #define IOPDW_RES_ADDR_0         0x00
  372 #define IOPDW_RAM_DATA           0x04
  373 #define IOPDW_RES_ADDR_8         0x08
  374 #define IOPDW_RES_ADDR_C         0x0C
  375 #define IOPDW_RES_ADDR_10        0x10
  376 #define IOPDW_COMMA              0x14
  377 #define IOPDW_COMMB              0x18
  378 #define IOPDW_RES_ADDR_1C        0x1C
  379 #define IOPDW_SDMA_ADDR0         0x20
  380 #define IOPDW_SDMA_ADDR1         0x24
  381 #define IOPDW_SDMA_COUNT         0x28
  382 #define IOPDW_SDMA_ERROR         0x2C
  383 #define IOPDW_RDMA_ADDR0         0x30
  384 #define IOPDW_RDMA_ADDR1         0x34
  385 #define IOPDW_RDMA_COUNT         0x38
  386 #define IOPDW_RDMA_ERROR         0x3C
  387 
  388 #define ADW_CHIP_ID_BYTE         0x25
  389 #define ADW_CHIP_ID_WORD         0x04C1
  390 
  391 #define ADW_SC_SCSI_BUS_RESET    0x2000
  392 
  393 #define ADW_INTR_ENABLE_HOST_INTR                   0x01
  394 #define ADW_INTR_ENABLE_SEL_INTR                    0x02
  395 #define ADW_INTR_ENABLE_DPR_INTR                    0x04
  396 #define ADW_INTR_ENABLE_RTA_INTR                    0x08
  397 #define ADW_INTR_ENABLE_RMA_INTR                    0x10
  398 #define ADW_INTR_ENABLE_RST_INTR                    0x20
  399 #define ADW_INTR_ENABLE_DPE_INTR                    0x40
  400 #define ADW_INTR_ENABLE_GLOBAL_INTR                 0x80
  401 
  402 #define ADW_INTR_STATUS_INTRA            0x01
  403 #define ADW_INTR_STATUS_INTRB            0x02
  404 #define ADW_INTR_STATUS_INTRC            0x04
  405 
  406 #define ADW_RISC_CSR_STOP           (0x0000)
  407 #define ADW_RISC_TEST_COND          (0x2000)
  408 #define ADW_RISC_CSR_RUN            (0x4000)
  409 #define ADW_RISC_CSR_SINGLE_STEP    (0x8000)
  410 
  411 #define ADW_CTRL_REG_HOST_INTR      0x0100
  412 #define ADW_CTRL_REG_SEL_INTR       0x0200
  413 #define ADW_CTRL_REG_DPR_INTR       0x0400
  414 #define ADW_CTRL_REG_RTA_INTR       0x0800
  415 #define ADW_CTRL_REG_RMA_INTR       0x1000
  416 #define ADW_CTRL_REG_RES_BIT14      0x2000
  417 #define ADW_CTRL_REG_DPE_INTR       0x4000
  418 #define ADW_CTRL_REG_POWER_DONE     0x8000
  419 #define ADW_CTRL_REG_ANY_INTR       0xFF00
  420 
  421 #define ADW_CTRL_REG_CMD_RESET             0x00C6
  422 #define ADW_CTRL_REG_CMD_WR_IO_REG         0x00C5
  423 #define ADW_CTRL_REG_CMD_RD_IO_REG         0x00C4
  424 #define ADW_CTRL_REG_CMD_WR_PCI_CFG_SPACE  0x00C3
  425 #define ADW_CTRL_REG_CMD_RD_PCI_CFG_SPACE  0x00C2
  426 
  427 #define ADW_TICKLE_NOP                      0x00
  428 #define ADW_TICKLE_A                        0x01
  429 #define ADW_TICKLE_B                        0x02
  430 #define ADW_TICKLE_C                        0x03
  431 
  432 #define ADW_SCSI_CTRL_RSTOUT        0x2000
  433 
  434 #define ADW_IS_INT_PENDING(iot, ioh)  \
  435     (ADW_READ_WORD_REGISTER((iot), (ioh), IOPW_CTRL_REG) & ADW_CTRL_REG_HOST_INTR)
  436 
  437 /*
  438  * SCSI_CFG0 Register bit definitions
  439  */
  440 #define ADW_TIMER_MODEAB    0xC000  /* Watchdog, Second, and Select. Timer Ctrl. */
  441 #define ADW_PARITY_EN       0x2000  /* Enable SCSI Parity Error detection */
  442 #define ADW_EVEN_PARITY     0x1000  /* Select Even Parity */
  443 #define ADW_WD_LONG         0x0800  /* Watchdog Interval, 1: 57 min, 0: 13 sec */
  444 #define ADW_QUEUE_128       0x0400  /* Queue Size, 1: 128 byte, 0: 64 byte */
  445 #define ADW_PRIM_MODE       0x0100  /* Primitive SCSI mode */
  446 #define ADW_SCAM_EN         0x0080  /* Enable SCAM selection */
  447 #define ADW_SEL_TMO_LONG    0x0040  /* Sel/Resel Timeout, 1: 400 ms, 0: 1.6 ms */
  448 #define ADW_CFRM_ID         0x0020  /* SCAM id sel. confirm., 1: fast, 0: 6.4 ms */
  449 #define ADW_OUR_ID_EN       0x0010  /* Enable OUR_ID bits */
  450 #define ADW_OUR_ID          0x000F  /* SCSI ID */
  451 
  452 /*
  453  * SCSI_CFG1 Register bit definitions
  454  */
  455 #define ADW_BIG_ENDIAN      0x8000  /* Enable Big Endian Mode MIO:15, EEP:15 */
  456 #define ADW_TERM_POL        0x2000  /* Terminator Polarity Ctrl. MIO:13, EEP:13 */
  457 #define ADW_SLEW_RATE       0x1000  /* SCSI output buffer slew rate */
  458 #define ADW_FILTER_SEL      0x0C00  /* Filter Period Selection */
  459 #define  ADW_FLTR_DISABLE    0x0000  /* Input Filtering Disabled */
  460 #define  ADW_FLTR_11_TO_20NS 0x0800  /* Input Filtering 11ns to 20ns */
  461 #define  ADW_FLTR_21_TO_39NS 0x0C00  /* Input Filtering 21ns to 39ns */
  462 #define ADW_ACTIVE_DBL      0x0200  /* Disable Active Negation */
  463 #define ADW_DIFF_MODE       0x0100  /* SCSI differential Mode (Read-Only) */
  464 #define ADW_DIFF_SENSE      0x0080  /* 1: No SE cables, 0: SE cable (Read-Only) */
  465 #define ADW_TERM_CTL_SEL    0x0040  /* Enable TERM_CTL_H and TERM_CTL_L */
  466 #define ADW_TERM_CTL        0x0030  /* External SCSI Termination Bits */
  467 #define  ADW_TERM_CTL_H      0x0020  /* Enable External SCSI Upper Termination */
  468 #define  ADW_TERM_CTL_L      0x0010  /* Enable External SCSI Lower Termination */
  469 #define ADW_CABLE_DETECT    0x000F  /* External SCSI Cable Connection Status */
  470 
  471 /*
  472  * Addendum for ASC-38C0800 Chip
  473  *
  474  * The ASC-38C1600 Chip uses the same definitions except that the
  475  * bus mode override bits [12:10] have been moved to byte register
  476  * offset 0xE (IOPB_SOFT_OVER_WR) bits [12:10]. The [12:10] bits in
  477  * SCSI_CFG1 are read-only and always available. Bit 14 (DIS_TERM_DRV)
  478  * is not needed. The [12:10] bits in IOPB_SOFT_OVER_WR are write-only.
  479  * Also each ASC-38C1600 function or channel uses only cable bits [5:4]
  480  * and [1:0]. Bits [14], [7:6], [3:2] are unused.
  481  */
  482 #define ADW_DIS_TERM_DRV    0x4000  /* 1: Read c_det[3:0], 0: cannot read */
  483 #define ADW_HVD_LVD_SE      0x1C00  /* Device Detect Bits */
  484 #define  ADW_HVD             0x1000  /* HVD Device Detect */
  485 #define  ADW_LVD             0x0800  /* LVD Device Detect */
  486 #define  ADW_SE              0x0400  /* SE Device Detect */
  487 #define ADW_TERM_LVD        0x00C0  /* LVD Termination Bits */
  488 #define  ADW_TERM_LVD_HI     0x0080  /* Enable LVD Upper Termination */
  489 #define  ADW_TERM_LVD_LO     0x0040  /* Enable LVD Lower Termination */
  490 #define ADW_TERM_SE         0x0030  /* SE Termination Bits */
  491 #define  ADW_TERM_SE_HI      0x0020  /* Enable SE Upper Termination */
  492 #define  ADW_TERM_SE_LO      0x0010  /* Enable SE Lower Termination */
  493 #define ADW_C_DET_LVD       0x000C  /* LVD Cable Detect Bits */
  494 #define  ADW_C_DET3          0x0008  /* Cable Detect for LVD External Wide */
  495 #define  ADW_C_DET2          0x0004  /* Cable Detect for LVD Internal Wide */
  496 #define ADW_C_DET_SE        0x0003  /* SE Cable Detect Bits */
  497 #define  ADW_C_DET1          0x0002  /* Cable Detect for SE Internal Wide */
  498 #define  ADW_C_DET0          0x0001  /* Cable Detect for SE Internal Narrow */
  499 
  500 
  501 #define CABLE_ILLEGAL_A 0x7
  502     /* x 0 0 0  | on  on | Illegal (all 3 connectors are used) */
  503 
  504 #define CABLE_ILLEGAL_B 0xB
  505     /* 0 x 0 0  | on  on | Illegal (all 3 connectors are used) */
  506 
  507 /*
  508    The following table details the SCSI_CFG1 Termination Polarity,
  509    Termination Control and Cable Detect bits.
  510 
  511    Cable Detect | Termination
  512    Bit 3 2 1 0  | 5   4  | Notes
  513    _____________|________|____________________
  514        1 1 1 0  | on  on | Internal wide only
  515        1 1 0 1  | on  on | Internal narrow only
  516        1 0 1 1  | on  on | External narrow only
  517        0 x 1 1  | on  on | External wide only
  518        1 1 0 0  | on  off| Internal wide and internal narrow
  519        1 0 1 0  | on  off| Internal wide and external narrow
  520        0 x 1 0  | off off| Internal wide and external wide
  521        1 0 0 1  | on  off| Internal narrow and external narrow
  522        0 x 0 1  | on  off| Internal narrow and external wide
  523        1 1 1 1  | on  on | No devices are attached
  524        x 0 0 0  | on  on | Illegal (all 3 connectors are used)
  525        0 x 0 0  | on  on | Illegal (all 3 connectors are used)
  526 
  527        x means don't-care (either '' or '1')
  528 
  529        If term_pol (bit 13) is '' (active-low terminator enable), then:
  530            'on' is '' and 'off' is '1'.
  531 
  532        If term_pol bit is '1' (meaning active-hi terminator enable), then:
  533            'on' is '1' and 'off' is ''.
  534  */
  535 
  536 /*
  537  * MEM_CFG Register bit definitions
  538  */
  539 #define ADW_BIOS_EN         0x40    /* BIOS Enable MIO:14,EEP:14 */
  540 #define ADW_FAST_EE_CLK     0x20    /* Diagnostic Bit */
  541 #define ADW_RAM_SZ          0x1C    /* Specify size of RAM to RISC */
  542 #define  ADW_RAM_SZ_2KB      0x00    /* 2 KB */
  543 #define  ADW_RAM_SZ_4KB      0x04    /* 4 KB */
  544 #define  ADW_RAM_SZ_8KB      0x08    /* 8 KB */
  545 #define  ADW_RAM_SZ_16KB     0x0C    /* 16 KB */
  546 #define  ADW_RAM_SZ_32KB     0x10    /* 32 KB */
  547 #define  ADW_RAM_SZ_64KB     0x14    /* 64 KB */
  548 
  549 /*
  550  * DMA_CFG0 Register bit definitions
  551  *
  552  * This register is only accessible to the host.
  553  */
  554 #define BC_THRESH_ENB   0x80    /* PCI DMA Start Conditions */
  555 #define FIFO_THRESH     0x70    /* PCI DMA FIFO Threshold */
  556 #define  FIFO_THRESH_16B  0x00   /* 16 bytes */
  557 #define  FIFO_THRESH_32B  0x20   /* 32 bytes */
  558 #define  FIFO_THRESH_48B  0x30   /* 48 bytes */
  559 #define  FIFO_THRESH_64B  0x40   /* 64 bytes */
  560 #define  FIFO_THRESH_80B  0x50   /* 80 bytes (default) */
  561 #define  FIFO_THRESH_96B  0x60   /* 96 bytes */
  562 #define  FIFO_THRESH_112B 0x70   /* 112 bytes */
  563 #define START_CTL       0x0C    /* DMA start conditions */
  564 #define  START_CTL_TH    0x00    /* Wait threshold level (default) */
  565 #define  START_CTL_ID    0x04    /* Wait SDMA/SBUS idle */
  566 #define  START_CTL_THID  0x08    /* Wait threshold and SDMA/SBUS idle */
  567 #define  START_CTL_EMFU  0x0C    /* Wait SDMA FIFO empty/full */
  568 #define READ_CMD        0x03    /* Memory Read Method */
  569 #define  READ_CMD_MR     0x00    /* Memory Read */
  570 #define  READ_CMD_MRL    0x02    /* Memory Read Long */
  571 #define  READ_CMD_MRM    0x03    /* Memory Read Multiple (default) */
  572 
  573 /*
  574  * ASC-38C0800 RAM BIST Register bit definitions
  575  */
  576 #define RAM_TEST_MODE         0x80
  577 #define PRE_TEST_MODE         0x40
  578 #define NORMAL_MODE           0x00
  579 #define RAM_TEST_DONE         0x10
  580 #define RAM_TEST_STATUS       0x0F
  581 #define  RAM_TEST_HOST_ERROR   0x08
  582 #define  RAM_TEST_INTRAM_ERROR 0x04
  583 #define  RAM_TEST_RISC_ERROR   0x02
  584 #define  RAM_TEST_SCSI_ERROR   0x01
  585 #define  RAM_TEST_SUCCESS      0x00
  586 #define PRE_TEST_VALUE        0x05
  587 #define NORMAL_VALUE          0x00
  588 
  589 /*
  590  * ASC38C1600 Definitions
  591  *
  592  * IOPB_PCI_INT_CFG Bit Field Definitions
  593  */
  594 
  595 #define INTAB_LD        0x80    /* Value loaded from EEPROM Bit 11. */
  596 
  597 /*
  598  * Bit 1 can be set to change the interrupt for the Function to operate in
  599  * Totem Pole mode. By default Bit 1 is 0 and the interrupt operates in
  600  * Open Drain mode. Both functions of the ASC38C1600 must be set to the same
  601  * mode, otherwise the operating mode is undefined.
  602  */
  603 #define TOTEMPOLE       0x02
  604 
  605 /*
  606  * Bit 0 can be used to change the Int Pin for the Function. The value is
  607  * 0 by default for both Functions with Function 0 using INT A and Function
  608  * B using INT B. For Function 0 if set, INT B is used. For Function 1 if set,
  609  * INT A is used.
  610  *
  611  * EEPROM Word 0 Bit 11 for each Function may change the initial Int Pin
  612  * value specified in the PCI Configuration Space.
  613  */
  614 #define INTAB           0x01
  615 
  616 
  617 #define ADW_MAX_TID                     15 /* max. target identifier */
  618 #define ADW_MAX_LUN                     7  /* max. logical unit number */
  619 
  620 
  621 /*
  622  * Adw Library Status Definitions
  623  */
  624 #define ADW_TRUE        1
  625 #define ADW_FALSE       0
  626 #define ADW_NOERROR     1
  627 #define ADW_SUCCESS     1
  628 #define ADW_BUSY        0
  629 #define ADW_ERROR       (-1)
  630 
  631 
  632 /*
  633  * Warning code values for AdwInitFrom*EEP() functions
  634  */
  635 #define ADW_WARN_BUSRESET_ERROR         0x0001 /* SCSI Bus Reset error */
  636 #define ADW_WARN_EEPROM_CHKSUM          0x0002 /* EEP check sum error */
  637 #define ADW_WARN_EEPROM_TERMINATION     0x0004 /* EEP termination bad field */
  638 #define ADW_WARN_SET_PCI_CONFIG_SPACE   0x0080 /* PCI config space set error */
  639 #define ADW_WARN_ERROR                  0xFFFF /* ADW_ERROR return */
  640 
  641 /*
  642  * Error code values for AdwInitAsc*Driver() functions
  643  */
  644 #define ADW_IERR_WRITE_EEPROM       0x0001 /* write EEPROM error */
  645 #define ADW_IERR_MCODE_CHKSUM       0x0002 /* micro code check sum error */
  646 #define ADW_IERR_NO_CARRIER         0x0004 /* No more carrier memory. */
  647 #define ADW_IERR_START_STOP_CHIP    0x0008 /* start/stop chip failed */
  648 #define ADW_IERR_CHIP_VERSION       0x0040 /* wrong chip version */
  649 #define ADW_IERR_SET_SCSI_ID        0x0080 /* set SCSI ID failed */
  650 #define ADW_IERR_HVD_DEVICE         0x0100 /* HVD attached to LVD connector. */
  651 #define ADW_IERR_BAD_SIGNATURE      0x0200 /* signature not found */
  652 #define ADW_IERR_ILLEGAL_CONNECTION 0x0400 /* Illegal cable connection */
  653 #define ADW_IERR_SINGLE_END_DEVICE  0x0800 /* Single-end used w/differential */
  654 #define ADW_IERR_REVERSED_CABLE     0x1000 /* Narrow flat cable reversed */
  655 #define ADW_IERR_BIST_PRE_TEST      0x2000 /* BIST pre-test error */
  656 #define ADW_IERR_BIST_RAM_TEST      0x4000 /* BIST RAM test error */
  657 #define ADW_IERR_BAD_CHIPTYPE       0x8000 /* Invalid 'chip_type' setting. */
  658 
  659 /*
  660  * BIOS LRAM variable absolute offsets.
  661  */
  662 #define BIOS_CODESEG    0x54
  663 #define BIOS_CODELEN    0x56
  664 #define BIOS_SIGNATURE  0x58
  665 #define BIOS_VERSION    0x5A
  666 
  667 /*
  668  * Chip Type flag values
  669  */
  670 #define ADW_CHIP_ASC3550          0x01   /* Ultra-Wide IC */
  671 #define ADW_CHIP_ASC38C0800       0x02   /* Ultra2-Wide/LVD IC */
  672 #define ADW_CHIP_ASC38C1600       0x03   /* Ultra3-Wide/LVD2 IC */
  673 
  674 /*
  675  * Adapter temporary configuration structure
  676  *
  677  * This structure can be discarded after initialization. Don't add
  678  * fields here needed after initialization.
  679  *
  680  * Field naming convention:
  681  *
  682  *  *_enable indicates the field enables or disables a feature. The
  683  *  value of the field is never reset.
  684  */
  685 typedef struct adw_dvc_cfg {
  686         u_int16_t       disc_enable;    /* enable disconnection */
  687         u_int8_t        chip_version;   /* chip version */
  688         u_int8_t        termination;    /* Term. Ctrl. bits 6-5 of SCSI_CFG1 */
  689         u_int16_t       pci_device_id;  /* PCI device code number */
  690         u_int16_t       lib_version;    /* Adw Library version number */
  691         u_int16_t       control_flag;   /* Microcode Control Flag */
  692         u_int16_t       mcode_date;     /* Microcode date */
  693         u_int16_t       mcode_version;  /* Microcode version */
  694         u_int16_t       pci_slot_info;  /* high byte device/function number
  695                                            bits 7-3 device num.,
  696                                            bits 2-0 function num.
  697                                            low byte bus num. */
  698         u_int16_t       serial1;        /* EEPROM serial number word 1 */
  699         u_int16_t       serial2;        /* EEPROM serial number word 2 */
  700         u_int16_t       serial3;        /* EEPROM serial number word 3 */
  701 } ADW_DVC_CFG;
  702 
  703 
  704 #define NO_OF_SG_PER_BLOCK              15
  705 
  706 typedef struct adw_sg_block {
  707         u_int8_t        reserved1;
  708         u_int8_t        reserved2;
  709         u_int8_t        reserved3;
  710         u_int8_t        sg_cnt;                 /* Valid entries in block. */
  711         u_int32_t       sg_ptr;                 /* links to next sg block */
  712         struct {
  713                 u_int32_t sg_addr;              /* SG element address */
  714                 u_int32_t sg_count;             /* SG element count */
  715         } sg_list[NO_OF_SG_PER_BLOCK];
  716 } ADW_SG_BLOCK;
  717 
  718 
  719 /*
  720  * Adapter operation variable structure.
  721  *
  722  * One structure is required per host adapter.
  723  *
  724  * Field naming convention:
  725  *
  726  *  *_able indicates both whether a feature should be enabled or disabled
  727  *  and whether a device is capable of the feature. At initialization
  728  *  this field may be set, but later if a device is found to be incapable
  729  *  of the feature, the field is cleared.
  730  */
  731 #define CCB_HASH_SIZE   32      /* hash table size for phystokv */
  732 #define CCB_HASH_SHIFT  9
  733 #define CCB_HASH(x)     ((((x)) >> CCB_HASH_SHIFT) & (CCB_HASH_SIZE - 1))
  734 
  735 typedef int (* ADW_CALLBACK) (int);
  736 
  737 typedef struct adw_softc {
  738 
  739         struct device           sc_dev;
  740 
  741         bus_space_tag_t         sc_iot;
  742         bus_space_handle_t      sc_ioh;
  743         bus_dma_tag_t           sc_dmat;
  744         bus_dmamap_t            sc_dmamap_control; /* maps the control structures */
  745         bus_dmamap_t            sc_dmamap_carrier; /* maps the carrier structures */
  746         void                    *sc_ih;
  747 
  748         struct adw_control      *sc_control; /* control structures */
  749 
  750         struct adw_ccb          *sc_ccbhash[CCB_HASH_SIZE];
  751         TAILQ_HEAD(, adw_ccb)   sc_free_ccb, sc_waiting_ccb;
  752         TAILQ_HEAD(adw_pending_ccb, adw_ccb)    sc_pending_ccb;
  753         struct scsipi_adapter   sc_adapter;
  754         struct scsipi_channel   sc_channel;
  755 
  756         int                     sc_freeze_dev[ADW_MAX_TID+1];
  757 
  758         ADW_CALLBACK    isr_callback;   /* pointer to function, called in AdwISR() */
  759         ADW_CALLBACK    async_callback; /* pointer to function, called in AdwISR() */
  760         u_int16_t       bios_ctrl;      /* BIOS control word, EEPROM word 12 */
  761         u_int16_t       wdtr_able;      /* try WDTR for a device */
  762         u_int16_t       sdtr_able;      /* try SDTR for a device */
  763         u_int16_t       ultra_able;     /* try SDTR Ultra speed for a device */
  764         u_int16_t       sdtr_speed1;    /* EEPROM SDTR Speed for TID 0-3   */
  765         u_int16_t       sdtr_speed2;    /* EEPROM SDTR Speed for TID 4-7   */
  766         u_int16_t       sdtr_speed3;    /* EEPROM SDTR Speed for TID 8-11  */
  767         u_int16_t       sdtr_speed4;    /* EEPROM SDTR Speed for TID 12-15 */
  768         u_int16_t       tagqng_able;    /* try tagged queuing with a device */
  769         u_int16_t       ppr_able;       /* PPR message capable per TID bitmask. */
  770         u_int16_t       start_motor;    /* start motor command allowed */
  771         u_int8_t        max_dvc_qng;    /* maximum number of tagged commands per device */
  772         u_int8_t        scsi_reset_wait; /* delay in seconds after scsi bus reset */
  773         u_int8_t        chip_no;        /* should be assigned by caller */
  774         u_int8_t        max_host_qng;   /* maximum number of Q'ed command allowed */
  775         u_int8_t        irq_no;         /* IRQ number */
  776         u_int8_t        chip_type;      /* chip SCSI target ID */
  777         u_int16_t       no_scam;        /* scam_tolerant of EEPROM */
  778         u_int32_t       drv_ptr;        /* driver pointer to private structure */
  779         u_int8_t        chip_scsi_id;   /* chip SCSI target ID */
  780         u_int8_t        bist_err_code;
  781         u_int16_t       carr_pending_cnt;  /* Count of pending carriers. */
  782         struct adw_carrier      *carr_freelist; /* Carrier free list. */
  783         struct adw_carrier      *icq_sp; /* Initiator command queue stopper pointer. */
  784         struct adw_carrier      *irq_sp; /* Initiator response queue stopper pointer. */
  785  /*
  786   * Note: The following fields will not be used after initialization. The
  787   * driver may discard the buffer after initialization is done.
  788   */
  789   ADW_DVC_CFG cfg; /* temporary configuration structure  */
  790 } ADW_SOFTC;
  791 
  792 
  793 /*
  794  * ADW_SCSI_REQ_Q - microcode request structure
  795  *
  796  * All fields in this structure up to byte 60 are used by the microcode.
  797  * The microcode makes assumptions about the size and ordering of fields
  798  * in this structure. Do not change the structure definition here without
  799  * coordinating the change with the microcode.
  800  */
  801 typedef struct adw_scsi_req_q {
  802         u_int8_t        cntl;           /* Ucode flags and state (ADW_MC_QC_*). */
  803         u_int8_t        target_cmd;
  804         u_int8_t        target_id;      /* Device target identifier. */
  805         u_int8_t        target_lun;     /* Device target logical unit number. */
  806         u_int32_t       data_addr;      /* Data buffer physical address. */
  807         u_int32_t       data_cnt;       /* Data count. Ucode sets to residual. */
  808         u_int32_t       sense_addr;     /* Sense buffer physical address. */
  809         u_int32_t       carr_ba;        /* Carrier p-address */
  810         u_int8_t        mflag;          /* Adw Library flag field. */
  811         u_int8_t        sense_len;      /* Auto-sense length. uCode sets to residual. */
  812         u_int8_t        cdb_len;        /* SCSI CDB length. Must <= 16 bytes. */
  813         u_int8_t        scsi_cntl;
  814         u_int8_t        done_status;    /* Completion status. (see below) */
  815         u_int8_t        scsi_status;    /* SCSI status byte. (see below) */
  816         u_int8_t        host_status;    /* ,uCode host status. (see below) */
  817         u_int8_t        sg_working_ix;  /* ,uCode working SG variable. */
  818         u_int8_t        cdb[12];        /* SCSI CDB bytes 0-11. */
  819         u_int32_t       sg_real_addr;   /* SG list physical address. */
  820         u_int32_t       scsiq_rptr;     /* Iternal pointer to ADW_SCSI_REQ_Q */
  821         u_int8_t        cdb16[4];       /* SCSI CDB bytes 12-15. */
  822         u_int32_t       ccb_ptr;        /* CCB Physical Address */
  823         u_int32_t       carr_va;        /* Carrier v-address (unused) */
  824         /*
  825          * End of microcode structure - 60 bytes. The rest of the structure
  826          * is used by the Adw Library and ignored by the microcode.
  827          */
  828         struct scsi_sense_data *vsense_addr;    /* Sense buffer virtual address. */
  829         u_char          *vdata_addr;    /* Data buffer virtual address. */
  830 } ADW_SCSI_REQ_Q;
  831 
  832 /*
  833  * ASC_SCSI_REQ_Q 'done_status' return values.
  834  */
  835 #define QD_NO_STATUS         0x00       /* Request not completed yet. */
  836 #define QD_NO_ERROR          0x01
  837 #define QD_ABORTED_BY_HOST   0x02
  838 #define QD_WITH_ERROR        0x04
  839 
  840 /*
  841  * ASC_SCSI_REQ_Q 'host_status' return values.
  842  */
  843 #define QHSTA_NO_ERROR              0x00
  844 #define QHSTA_M_SEL_TIMEOUT         0x11
  845 #define QHSTA_M_DATA_OVER_RUN       0x12
  846 #define QHSTA_M_UNEXPECTED_BUS_FREE 0x13
  847 #define QHSTA_M_QUEUE_ABORTED       0x15
  848 #define QHSTA_M_SXFR_SDMA_ERR       0x16 /* SXFR_STATUS SCSI DMA Error */
  849 #define QHSTA_M_SXFR_SXFR_PERR      0x17 /* SXFR_STATUS SCSI Bus Parity Error */
  850 #define QHSTA_M_RDMA_PERR           0x18 /* RISC PCI DMA parity error */
  851 #define QHSTA_M_SXFR_OFF_UFLW       0x19 /* SXFR_STATUS Offset Underflow */
  852 #define QHSTA_M_SXFR_OFF_OFLW       0x20 /* SXFR_STATUS Offset Overflow */
  853 #define QHSTA_M_SXFR_WD_TMO         0x21 /* SXFR_STATUS Watchdog Timeout */
  854 #define QHSTA_M_SXFR_DESELECTED     0x22 /* SXFR_STATUS Deselected */
  855 /* Note: QHSTA_M_SXFR_XFR_OFLW is identical to QHSTA_M_DATA_OVER_RUN. */
  856 #define QHSTA_M_SXFR_XFR_OFLW       0x12 /* SXFR_STATUS Transfer Overflow */
  857 #define QHSTA_M_SXFR_XFR_PH_ERR     0x24 /* SXFR_STATUS Transfer Phase Error */
  858 #define QHSTA_M_SXFR_UNKNOWN_ERROR  0x25 /* SXFR_STATUS Unknown Error */
  859 #define QHSTA_M_SCSI_BUS_RESET      0x30 /* Request aborted from SBR */
  860 #define QHSTA_M_SCSI_BUS_RESET_UNSOL 0x31 /* Request aborted from unsol. SBR */
  861 #define QHSTA_M_BUS_DEVICE_RESET    0x32 /* Request aborted from BDR */
  862 #define QHSTA_M_DIRECTION_ERR       0x35 /* Data Phase mismatch */
  863 #define QHSTA_M_DIRECTION_ERR_HUNG  0x36 /* Data Phase mismatch and bus hang */
  864 #define QHSTA_M_WTM_TIMEOUT         0x41
  865 #define QHSTA_M_BAD_CMPL_STATUS_IN  0x42
  866 #define QHSTA_M_NO_AUTO_REQ_SENSE   0x43
  867 #define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44
  868 #define QHSTA_M_INVALID_DEVICE      0x45 /* Bad target ID */
  869 #define QHSTA_M_FROZEN_TIDQ         0x46 /* TID Queue frozen. */
  870 #define QHSTA_M_SGBACKUP_ERROR      0x47 /* Scatter-Gather backup error */
  871 
  872 /*
  873  * ASC_SCSI_REQ_Q 'scsi_status' return values.
  874  */
  875 #define SCSI_STATUS_GOOD                0x00
  876 #define SCSI_STATUS_CHECK_CONDITION     0x02
  877 #define SCSI_STATUS_CONDITION_MET       0x04
  878 #define SCSI_STATUS_TARGET_BUSY         0x08
  879 #define SCSI_STATUS_INTERMID            0x10
  880 #define SCSI_STATUS_INTERMID_COND_MET   0x14
  881 #define SCSI_STATUS_RSERV_CONFLICT      0x18
  882 #define SCSI_STATUS_CMD_TERMINATED      0x22
  883 #define SCSI_STATUS_QUEUE_FULL          0x28
  884 
  885 
  886 /*
  887  * Microcode idle loop commands
  888  */
  889 #define IDLE_CMD_COMPLETED           0
  890 #define IDLE_CMD_STOP_CHIP           0x0001
  891 #define IDLE_CMD_STOP_CHIP_SEND_INT  0x0002
  892 #define IDLE_CMD_SEND_INT            0x0004
  893 #define IDLE_CMD_ABORT               0x0008
  894 #define IDLE_CMD_DEVICE_RESET        0x0010
  895 #define IDLE_CMD_SCSI_RESET_START    0x0020 /* Assert SCSI Bus Reset */
  896 #define IDLE_CMD_SCSI_RESET_END      0x0040 /* Deassert SCSI Bus Reset */
  897 #define IDLE_CMD_SCSIREQ             0x0080
  898 
  899 #define IDLE_CMD_STATUS_SUCCESS      0x0001
  900 #define IDLE_CMD_STATUS_FAILURE      0x0002
  901 
  902 /*
  903  * AdwSendIdleCmd() flag definitions.
  904  */
  905 #define ADW_NOWAIT     0x01
  906 
  907 /*
  908  * Wait loop time out values.
  909  */
  910 #define SCSI_WAIT_10_SEC             10UL    /* 10 seconds */
  911 #define SCSI_WAIT_100_MSEC           100UL   /* 100 milliseconds */
  912 #define SCSI_US_PER_MSEC             1000    /* microseconds per millisecond */
  913 #define SCSI_MS_PER_SEC              1000UL  /* milliseconds per second */
  914 #define SCSI_MAX_RETRY               10      /* retry count */
  915 
  916 #define ADV_ASYNC_RDMA_FAILURE          0x01 /* Fatal RDMA failure. */
  917 #define ADV_ASYNC_SCSI_BUS_RESET_DET    0x02 /* Detected SCSI Bus Reset. */
  918 #define ADV_ASYNC_CARRIER_READY_FAILURE 0x03 /* Carrier Ready failure. */
  919 
  920 #define ADV_HOST_SCSI_BUS_RESET      0x80 /* Host Initiated SCSI Bus Reset. */
  921 
  922 
  923 /* Read byte from a register. */
  924 #define ADW_READ_BYTE_REGISTER(iot, ioh, reg_off) \
  925         bus_space_read_1((iot), (ioh), (reg_off))
  926 
  927 /* Write byte to a register. */
  928 #define ADW_WRITE_BYTE_REGISTER(iot, ioh, reg_off, byte) \
  929         bus_space_write_1((iot), (ioh), (reg_off), (byte))
  930 
  931 /* Read word (2 bytes) from a register. */
  932 #define ADW_READ_WORD_REGISTER(iot, ioh, reg_off) \
  933         bus_space_read_2((iot), (ioh), (reg_off))
  934 
  935 /* Write word (2 bytes) to a register. */
  936 #define ADW_WRITE_WORD_REGISTER(iot, ioh, reg_off, word) \
  937         bus_space_write_2((iot), (ioh), (reg_off), (word))
  938 
  939 /* Write double word (4 bytes) to a register. */
  940 #define ADW_WRITE_DWORD_REGISTER(iot, ioh, reg_off, dword) \
  941         bus_space_write_4((iot), (ioh), (reg_off), (dword))
  942 
  943 /* Read byte from LRAM. */
  944 #define ADW_READ_BYTE_LRAM(iot, ioh, addr, byte)                \
  945 do {                                                            \
  946         bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \
  947         (byte) = bus_space_read_1((iot), (ioh), IOPB_RAM_DATA); \
  948 } while (0)
  949 
  950 /* Write byte to LRAM. */
  951 #define ADW_WRITE_BYTE_LRAM(iot, ioh, addr, byte)               \
  952 do {                                                            \
  953         bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \
  954         bus_space_write_1((iot), (ioh), IOPB_RAM_DATA, (byte)); \
  955 } while (0)
  956 
  957 /* Read word (2 bytes) from LRAM. */
  958 #define ADW_READ_WORD_LRAM(iot, ioh, addr, word)                \
  959 do {                                                            \
  960         bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \
  961         (word) = bus_space_read_2((iot), (ioh), IOPW_RAM_DATA); \
  962 } while (0)
  963 
  964 /* Write word (2 bytes) to LRAM. */
  965 #define ADW_WRITE_WORD_LRAM(iot, ioh, addr, word)               \
  966 do {                                                            \
  967         bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \
  968         bus_space_write_2((iot), (ioh), IOPW_RAM_DATA, (word)); \
  969 } while (0)
  970 
  971 /* Write double word (4 bytes) to LRAM */
  972 /* Because of unspecified C language ordering don't use auto-increment. */
  973 #define ADW_WRITE_DWORD_LRAM(iot, ioh, addr, dword)                     \
  974 do {                                                                    \
  975         bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr));         \
  976         bus_space_write_2((iot), (ioh), IOPW_RAM_DATA,                  \
  977                 (u_int16_t) ((dword) & 0xFFFF));                        \
  978         bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr) + 2);     \
  979         bus_space_write_2((iot), (ioh), IOPW_RAM_DATA,                  \
  980                 (u_int16_t) ((dword >> 16) & 0xFFFF));                  \
  981 } while (0)
  982 
  983 /* Read word (2 bytes) from LRAM assuming that the address is already set. */
  984 #define ADW_READ_WORD_AUTO_INC_LRAM(iot, ioh) \
  985         bus_space_read_2((iot), (ioh), IOPW_RAM_DATA) \
  986 
  987 /* Write word (2 bytes) to LRAM assuming that the address is already set. */
  988 #define ADW_WRITE_WORD_AUTO_INC_LRAM(iot, ioh, word) \
  989         bus_space_write_2((iot), (ioh), IOPW_RAM_DATA, (word))
  990 
  991 /*
  992  * Define macro to check for Condor signature.
  993  *
  994  * Evaluate to ADW_TRUE if a Condor chip is found the specified port
  995  * address 'iop_base'. Otherwise evalue to ADW_FALSE.
  996  */
  997 #define ADW_FIND_SIGNATURE(iot, ioh)                                     \
  998         (((ADW_READ_BYTE_REGISTER((iot), (ioh), IOPB_CHIP_ID_1) ==       \
  999                 ADW_CHIP_ID_BYTE) &&                                     \
 1000                 (ADW_READ_WORD_REGISTER((iot), (ioh), IOPW_CHIP_ID_0) == \
 1001                 ADW_CHIP_ID_WORD)) ?  ADW_TRUE : ADW_FALSE)
 1002 
 1003 /*
 1004  * Define macro to Return the version number of the chip at 'iop_base'.
 1005  *
 1006  * The second parameter 'bus_type' is currently unused.
 1007  */
 1008 #define ADW_GET_CHIP_VERSION(iot, ioh, bus_type) \
 1009         ADW_READ_BYTE_REGISTER((iot), (ioh), IOPB_CHIP_TYPE_REV)
 1010 
 1011 /*
 1012  * Abort an SRB in the chip's RISC Memory. The 'srb_ptr' argument must
 1013  * match the ASC_SCSI_REQ_Q 'srb_ptr' field.
 1014  *
 1015  * If the request has not yet been sent to the device it will simply be
 1016  * aborted from RISC memory. If the request is disconnected it will be
 1017  * aborted on reselection by sending an Abort Message to the target ID.
 1018  *
 1019  * Return value:
 1020  *      ADW_TRUE(1) - Queue was successfully aborted.
 1021  *      ADW_FALSE(0) - Queue was not found on the active queue list.
 1022  */
 1023 #define ADW_ABORT_CCB(sc, ccb_ptr) \
 1024         AdwSendIdleCmd((sc), (u_int16_t) IDLE_CMD_ABORT, (ccb_ptr)->hashkey)
 1025 
 1026 /*
 1027  * Send a Bus Device Reset Message to the specified target ID.
 1028  *
 1029  * All outstanding commands will be purged if sending the
 1030  * Bus Device Reset Message is successful.
 1031  *
 1032  * Return Value:
 1033  *      ADW_TRUE(1) - All requests on the target are purged.
 1034  *      ADW_FALSE(0) - Couldn't issue Bus Device Reset Message; Requests
 1035  *                     are not purged.
 1036  */
 1037 #define ADW_RESET_DEVICE(sc, target_id) \
 1038         AdwSendIdleCmd((sc), (u_int16_t) IDLE_CMD_DEVICE_RESET, (target_id), 0)
 1039 
 1040 /*
 1041  * SCSI Wide Type definition.
 1042  */
 1043 #define ADW_SCSI_BIT_ID_TYPE   u_int16_t
 1044 
 1045 /*
 1046  * AdwInitScsiTarget() 'cntl_flag' options.
 1047  */
 1048 #define ADW_SCAN_LUN           0x01
 1049 #define ADW_CAPINFO_NOLUN      0x02
 1050 
 1051 /*
 1052  * Convert target id to target id bit mask.
 1053  */
 1054 #define ADW_TID_TO_TIDMASK(tid)   (0x01 << ((tid) & ADW_MAX_TID))
 1055 
 1056 /*
 1057  * Adv Library functions available to drivers.
 1058  */
 1059 
 1060 int     AdwInitFromEEPROM(ADW_SOFTC *);
 1061 int     AdwInitDriver(ADW_SOFTC *);
 1062 int     AdwExeScsiQueue(ADW_SOFTC *, ADW_SCSI_REQ_Q *);
 1063 int     AdwISR(ADW_SOFTC *);
 1064 void    AdwResetChip(bus_space_tag_t, bus_space_handle_t);
 1065 int     AdwSendIdleCmd(ADW_SOFTC *, u_int16_t, u_int32_t);
 1066 int     AdwResetSCSIBus(ADW_SOFTC *);
 1067 int     AdwResetCCB(ADW_SOFTC *);
 1068 
 1069 #endif  /* _ADVANSYS_WIDE_LIBRARY_H_ */

Cache object: 015a191371eed82f238ce35c799ee7fa


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.