The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/aic7xxxvar.h

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*
    2  * Core definitions and data structures sharable across OS platforms.
    3  *
    4  * Copyright (c) 1994-2001 Justin T. Gibbs.
    5  * Copyright (c) 2000-2001 Adaptec Inc.
    6  * All rights reserved.
    7  *
    8  * Redistribution and use in source and binary forms, with or without
    9  * modification, are permitted provided that the following conditions
   10  * are met:
   11  * 1. Redistributions of source code must retain the above copyright
   12  *    notice, this list of conditions, and the following disclaimer,
   13  *    without modification.
   14  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
   15  *    substantially similar to the "NO WARRANTY" disclaimer below
   16  *    ("Disclaimer") and any redistribution must be conditioned upon
   17  *    including a substantially similar Disclaimer requirement for further
   18  *    binary redistribution.
   19  * 3. Neither the names of the above-listed copyright holders nor the names
   20  *    of any contributors may be used to endorse or promote products derived
   21  *    from this software without specific prior written permission.
   22  *
   23  * Alternatively, this software may be distributed under the terms of the
   24  * GNU General Public License ("GPL") version 2 as published by the Free
   25  * Software Foundation.
   26  *
   27  * NO WARRANTY
   28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   29  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   30  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
   31  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
   32  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   33  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
   34  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
   35  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
   36  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
   37  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
   38  * POSSIBILITY OF SUCH DAMAGES.
   39  *
   40  * $Id: aic7xxxvar.h,v 1.55 2008/02/11 21:43:46 dyoung Exp $
   41  *
   42  * $FreeBSD: /repoman/r/ncvs/src/sys/dev/aic7xxx/aic7xxx.h,v 1.44 2003/01/20 20:44:55 gibbs Exp $
   43  */
   44 /*
   45  * Ported from FreeBSD by Pascal Renauld, Network Storage Solutions, Inc. - April 2003
   46  */
   47 
   48 #ifndef _AIC7XXXVAR_H_
   49 #define _AIC7XXXVAR_H_
   50 
   51 #undef AHC_DEBUG
   52 
   53 /* Register Definitions */
   54 #include <dev/microcode/aic7xxx/aic7xxx_reg.h>
   55 
   56 #include <dev/ic/aic7xxx_cam.h>
   57 
   58 #define AIC_OP_OR       0x0
   59 #define AIC_OP_AND      0x1
   60 #define AIC_OP_XOR      0x2
   61 #define AIC_OP_ADD      0x3
   62 #define AIC_OP_ADC      0x4
   63 #define AIC_OP_ROL      0x5
   64 #define AIC_OP_BMOV     0x6
   65 
   66 #define AIC_OP_JMP      0x8
   67 #define AIC_OP_JC       0x9
   68 #define AIC_OP_JNC      0xa
   69 #define AIC_OP_CALL     0xb
   70 #define AIC_OP_JNE      0xc
   71 #define AIC_OP_JNZ      0xd
   72 #define AIC_OP_JE       0xe
   73 #define AIC_OP_JZ       0xf
   74 
   75 /* Pseudo Ops */
   76 #define AIC_OP_SHL      0x10
   77 #define AIC_OP_SHR      0x20
   78 #define AIC_OP_ROR      0x30
   79 
   80 struct ins_format1 {
   81 #if BYTE_ORDER == LITTLE_ENDIAN
   82         uint32_t        immediate       : 8,
   83                         source          : 9,
   84                         destination     : 9,
   85                         ret             : 1,
   86                         opcode          : 4,
   87                         parity          : 1;
   88 #else
   89         uint32_t        parity          : 1,
   90                         opcode          : 4,
   91                         ret             : 1,
   92                         destination     : 9,
   93                         source          : 9,
   94                         immediate       : 8;
   95 #endif
   96 };
   97 
   98 struct ins_format2 {
   99 #if BYTE_ORDER == LITTLE_ENDIAN
  100         uint32_t        shift_control   : 8,
  101                         source          : 9,
  102                         destination     : 9,
  103                         ret             : 1,
  104                         opcode          : 4,
  105                         parity          : 1;
  106 #else
  107         uint32_t        parity          : 1,
  108                         opcode          : 4,
  109                         ret             : 1,
  110                         destination     : 9,
  111                         source          : 9,
  112                         shift_control   : 8;
  113 #endif
  114 };
  115 
  116 struct ins_format3 {
  117 #if BYTE_ORDER == LITTLE_ENDIAN
  118         uint32_t        immediate       : 8,
  119                         source          : 9,
  120                         address         : 10,
  121                         opcode          : 4,
  122                         parity          : 1;
  123 #else
  124         uint32_t        parity          : 1,
  125                         opcode          : 4,
  126                         address         : 10,
  127                         source          : 9,
  128                         immediate       : 8;
  129 #endif
  130 };
  131 
  132 union ins_formats {
  133                 struct ins_format1 format1;
  134                 struct ins_format2 format2;
  135                 struct ins_format3 format3;
  136                 uint8_t            bytes[4];
  137                 uint32_t           integer;
  138 };
  139 
  140 /************************* Forward Declarations *******************************/
  141 struct ahc_platform_data;
  142 struct scb_platform_data;
  143 struct seeprom_descriptor;
  144 
  145 /****************************** Useful Macros *********************************/
  146 #ifndef MAX
  147 #define MAX(a,b) (((a) > (b)) ? (a) : (b))
  148 #endif
  149 
  150 #ifndef MIN
  151 #define MIN(a,b) (((a) < (b)) ? (a) : (b))
  152 #endif
  153 
  154 #ifndef TRUE
  155 #define TRUE 1
  156 #endif
  157 #ifndef FALSE
  158 #define FALSE 0
  159 #endif
  160 
  161 #define NUM_ELEMENTS(array) (sizeof(array) / sizeof(*array))
  162 
  163 #define ALL_CHANNELS '\0'
  164 #define ALL_TARGETS_MASK 0xFFFF
  165 #define INITIATOR_WILDCARD      (~0)
  166 
  167 #define SCSIID_TARGET(ahc, scsiid) \
  168         (((scsiid) & ((((ahc)->features & AHC_TWIN) != 0) ? TWIN_TID : TID)) \
  169         >> TID_SHIFT)
  170 #define SCSIID_OUR_ID(scsiid) \
  171         ((scsiid) & OID)
  172 #define SCSIID_CHANNEL(ahc, scsiid) \
  173         ((((ahc)->features & AHC_TWIN) != 0) \
  174         ? ((((scsiid) & TWIN_CHNLB) != 0) ? 'B' : 'A') \
  175         : 'A')
  176 #define SCB_IS_SCSIBUS_B(ahc, scb) \
  177         (SCSIID_CHANNEL(ahc, (scb)->hscb->scsiid) == 'B')
  178 #define SCB_GET_OUR_ID(scb) \
  179         SCSIID_OUR_ID((scb)->hscb->scsiid)
  180 #define SCB_GET_TARGET(ahc, scb) \
  181         SCSIID_TARGET((ahc), (scb)->hscb->scsiid)
  182 #define SCB_GET_CHANNEL(ahc, scb) \
  183         SCSIID_CHANNEL(ahc, (scb)->hscb->scsiid)
  184 #define SCB_GET_LUN(scb) \
  185         ((scb)->hscb->lun)
  186 #define SCB_GET_TARGET_OFFSET(ahc, scb) \
  187         (SCB_GET_TARGET(ahc, scb))
  188 #define SCB_GET_TARGET_MASK(ahc, scb) \
  189         (0x01 << (SCB_GET_TARGET_OFFSET(ahc, scb)))
  190 #ifdef AHC_DEBUG
  191 #define SCB_IS_SILENT(scb)                                      \
  192         ((ahc_debug & AHC_SHOW_MASKED_ERRORS) == 0              \
  193         && (((scb)->flags & SCB_SILENT) != 0))
  194 #else
  195 #define SCB_IS_SILENT(scb)                                      \
  196         (((scb)->flags & SCB_SILENT) != 0)
  197 #endif
  198 #define TCL_TARGET_OFFSET(tcl) \
  199         ((((tcl) >> 4) & TID) >> 4)
  200 #define TCL_LUN(tcl) \
  201         (tcl & (AHC_NUM_LUNS - 1))
  202 #define BUILD_TCL(scsiid, lun) \
  203         ((lun) | (((scsiid) & TID) << 4))
  204 
  205 #ifndef AHC_TARGET_MODE
  206 #undef  AHC_TMODE_ENABLE
  207 #define AHC_TMODE_ENABLE 0
  208 #endif
  209 
  210 /**************************** Driver Constants ********************************/
  211 /*
  212  * The maximum number of supported targets.
  213  */
  214 #define AHC_NUM_TARGETS 16
  215 
  216 /*
  217  * The maximum number of supported luns.
  218  * The identify message only supports 64 luns in SPI3.
  219  * You can have 2^64 luns when information unit transfers are enabled,
  220  * but it is doubtful this driver will ever support IUTs.
  221  */
  222 #define AHC_NUM_LUNS 64
  223 
  224 /*
  225  * The maximum transfer per S/G segment.
  226  * Limited by MAXPHYS or a 24-bit counter.
  227  */
  228 #define AHC_MAXTRANSFER_SIZE    MIN(MAXPHYS,0x00ffffff)
  229 
  230 /*
  231  * The maximum amount of SCB storage in hardware on a controller.
  232  * This value represents an upper bound.  Controllers vary in the number
  233  * they actually support.
  234  */
  235 #define AHC_SCB_MAX     255
  236 
  237 /*
  238  * The maximum number of concurrent transactions supported per driver instance.
  239  * Sequencer Control Blocks (SCBs) store per-transaction information.  Although
  240  * the space for SCBs on the host adapter varies by model, the driver will
  241  * page the SCBs between host and controller memory as needed.  We are limited
  242  * to 253 because:
  243  *      1) The 8bit nature of the RISC engine holds us to an 8bit value.
  244  *      2) We reserve one value, 255, to represent the invalid element.
  245  *      3) Our input queue scheme requires one SCB to always be reserved
  246  *         in advance of queuing any SCBs.  This takes us down to 254.
  247  *      4) To handle our output queue correctly on machines that only
  248  *         support 32bit stores, we must clear the array 4 bytes at a
  249  *         time.  To avoid colliding with a DMA write from the sequencer,
  250  *         we must be sure that 4 slots are empty when we write to clear
  251  *         the queue.  This reduces us to 253 SCBs: 1 that just completed
  252  *         and the known three additional empty slots in the queue that
  253  *         precede it.
  254  */
  255 #define AHC_MAX_QUEUE   253
  256 
  257 /*
  258  * The maximum amount of SCB storage we allocate in host memory.  This
  259  * number should reflect the 1 additional SCB we require to handle our
  260  * qinfifo mechanism.
  261  */
  262 #define AHC_SCB_MAX_ALLOC (AHC_MAX_QUEUE+1)
  263 
  264 /*
  265  * Ring Buffer of incoming target commands.
  266  * We allocate 256 to simplify the logic in the sequencer
  267  * by using the natural wrap point of an 8bit counter.
  268  */
  269 #define AHC_TMODE_CMDS  256
  270 
  271 /* Reset line assertion time in us */
  272 #define AHC_BUSRESET_DELAY      25
  273 
  274 /******************* Chip Characteristics/Operating Settings  *****************/
  275 /*
  276  * Chip Type
  277  * The chip order is from least sophisticated to most sophisticated.
  278  */
  279 typedef enum {
  280         AHC_NONE        = 0x0000,
  281         AHC_CHIPID_MASK = 0x00FF,
  282         AHC_AIC7770     = 0x0001,
  283         AHC_AIC7850     = 0x0002,
  284         AHC_AIC7855     = 0x0003,
  285         AHC_AIC7859     = 0x0004,
  286         AHC_AIC7860     = 0x0005,
  287         AHC_AIC7870     = 0x0006,
  288         AHC_AIC7880     = 0x0007,
  289         AHC_AIC7895     = 0x0008,
  290         AHC_AIC7895C    = 0x0009,
  291         AHC_AIC7890     = 0x000a,
  292         AHC_AIC7896     = 0x000b,
  293         AHC_AIC7892     = 0x000c,
  294         AHC_AIC7899     = 0x000d,
  295         AHC_VL          = 0x0100,       /* Bus type VL */
  296         AHC_EISA        = 0x0200,       /* Bus type EISA */
  297         AHC_PCI         = 0x0400,       /* Bus type PCI */
  298         AHC_BUS_MASK    = 0x0F00
  299 } ahc_chip;
  300 
  301 /*
  302  * Features available in each chip type.
  303  */
  304 typedef enum {
  305         AHC_FENONE      = 0x00000,
  306         AHC_ULTRA       = 0x00001,      /* Supports 20MHz Transfers */
  307         AHC_ULTRA2      = 0x00002,      /* Supports 40MHz Transfers */
  308         AHC_WIDE        = 0x00004,      /* Wide Channel */
  309         AHC_TWIN        = 0x00008,      /* Twin Channel */
  310         AHC_MORE_SRAM   = 0x00010,      /* 80 bytes instead of 64 */
  311         AHC_CMD_CHAN    = 0x00020,      /* Has a Command DMA Channel */
  312         AHC_QUEUE_REGS  = 0x00040,      /* Has Queue management registers */
  313         AHC_SG_PRELOAD  = 0x00080,      /* Can perform auto-SG preload */
  314         AHC_SPIOCAP     = 0x00100,      /* Has a Serial Port I/O Cap Register */
  315         AHC_MULTI_TID   = 0x00200,      /* Has bitmask of TIDs for select-in */
  316         AHC_HS_MAILBOX  = 0x00400,      /* Has HS_MAILBOX register */
  317         AHC_DT          = 0x00800,      /* Double Transition transfers */
  318         AHC_NEW_TERMCTL = 0x01000,      /* Newer termination scheme */
  319         AHC_MULTI_FUNC  = 0x02000,      /* Multi-Function Twin Channel Device */
  320         AHC_LARGE_SCBS  = 0x04000,      /* 64byte SCBs */
  321         AHC_AUTORATE    = 0x08000,      /* Automatic update of SCSIRATE/OFFSET*/
  322         AHC_AUTOPAUSE   = 0x10000,      /* Automatic pause on register access */
  323         AHC_TARGETMODE  = 0x20000,      /* Has tested target mode support */
  324         AHC_MULTIROLE   = 0x40000,      /* Space for two roles at a time */
  325         AHC_REMOVABLE   = 0x80000,      /* Hot-Swap supported */
  326         AHC_AIC7770_FE  = AHC_FENONE,
  327         /*
  328          * The real 7850 does not support Ultra modes, but there are
  329          * several cards that use the generic 7850 PCI ID even though
  330          * they are using an Ultra capable chip (7859/7860).  We start
  331          * out with the AHC_ULTRA feature set and then check the DEVSTATUS
  332          * register to determine if the capability is really present.
  333          */
  334         AHC_AIC7850_FE  = AHC_SPIOCAP|AHC_AUTOPAUSE|AHC_TARGETMODE|AHC_ULTRA,
  335         AHC_AIC7860_FE  = AHC_AIC7850_FE,
  336         AHC_AIC7870_FE  = AHC_TARGETMODE,
  337         AHC_AIC7880_FE  = AHC_AIC7870_FE|AHC_ULTRA,
  338         /*
  339          * Although we have space for both the initiator and
  340          * target roles on ULTRA2 chips, we currently disable
  341          * the initiator role to allow multi-scsi-id target mode
  342          * configurations.  We can only respond on the same SCSI
  343          * ID as our initiator role if we allow initiator operation.
  344          * At some point, we should add a configuration knob to
  345          * allow both roles to be loaded.
  346          */
  347         AHC_AIC7890_FE  = AHC_MORE_SRAM|AHC_CMD_CHAN|AHC_ULTRA2
  348                           |AHC_QUEUE_REGS|AHC_SG_PRELOAD|AHC_MULTI_TID
  349                           |AHC_HS_MAILBOX|AHC_NEW_TERMCTL|AHC_LARGE_SCBS
  350                           |AHC_TARGETMODE,
  351         AHC_AIC7892_FE  = AHC_AIC7890_FE|AHC_DT|AHC_AUTORATE|AHC_AUTOPAUSE,
  352         AHC_AIC7895_FE  = AHC_AIC7880_FE|AHC_MORE_SRAM|AHC_AUTOPAUSE
  353                           |AHC_CMD_CHAN|AHC_MULTI_FUNC|AHC_LARGE_SCBS,
  354         AHC_AIC7895C_FE = AHC_AIC7895_FE|AHC_MULTI_TID,
  355         AHC_AIC7896_FE  = AHC_AIC7890_FE|AHC_MULTI_FUNC,
  356         AHC_AIC7899_FE  = AHC_AIC7892_FE|AHC_MULTI_FUNC
  357 } ahc_feature;
  358 
  359 /*
  360  * Bugs in the silicon that we work around in software.
  361  */
  362 typedef enum {
  363         AHC_BUGNONE             = 0x00,
  364         /*
  365          * On all chips prior to the U2 product line,
  366          * the WIDEODD S/G segment feature does not
  367          * work during scsi->HostBus transfers.
  368          */
  369         AHC_TMODE_WIDEODD_BUG   = 0x01,
  370         /*
  371          * On the aic7890/91 Rev 0 chips, the autoflush
  372          * feature does not work.  A manual flush of
  373          * the DMA FIFO is required.
  374          */
  375         AHC_AUTOFLUSH_BUG       = 0x02,
  376         /*
  377          * On many chips, cacheline streaming does not work.
  378          */
  379         AHC_CACHETHEN_BUG       = 0x04,
  380         /*
  381          * On the aic7896/97 chips, cacheline
  382          * streaming must be enabled.
  383          */
  384         AHC_CACHETHEN_DIS_BUG   = 0x08,
  385         /*
  386          * PCI 2.1 Retry failure on non-empty data fifo.
  387          */
  388         AHC_PCI_2_1_RETRY_BUG   = 0x10,
  389         /*
  390          * Controller does not handle cacheline residuals
  391          * properly on S/G segments if PCI MWI instructions
  392          * are allowed.
  393          */
  394         AHC_PCI_MWI_BUG         = 0x20,
  395         /*
  396          * An SCB upload using the SCB channel's
  397          * auto array entry copy feature may
  398          * corrupt data.  This appears to only
  399          * occur on 66MHz systems.
  400          */
  401         AHC_SCBCHAN_UPLOAD_BUG  = 0x40
  402 } ahc_bug;
  403 
  404 /*
  405  * Configuration specific settings.
  406  * The driver determines these settings by probing the
  407  * chip/controller's configuration.
  408  */
  409 typedef enum {
  410         AHC_FNONE             = 0x000,
  411         AHC_PRIMARY_CHANNEL   = 0x003,  /*
  412                                          * The channel that should
  413                                          * be probed first.
  414                                          */
  415         AHC_USEDEFAULTS       = 0x004,  /*
  416                                          * For cards without an seeprom
  417                                          * or a BIOS to initialize the chip's
  418                                          * SRAM, we use the default settings.
  419                                          */
  420         AHC_SEQUENCER_DEBUG   = 0x008,
  421         AHC_SHARED_SRAM       = 0x010,
  422         AHC_LARGE_SEEPROM     = 0x020,  /* Uses C56_66 not C46 */
  423         AHC_RESET_BUS_A       = 0x040,
  424         AHC_RESET_BUS_B       = 0x080,
  425         AHC_EXTENDED_TRANS_A  = 0x100,
  426         AHC_EXTENDED_TRANS_B  = 0x200,
  427         AHC_TERM_ENB_A        = 0x400,
  428         AHC_TERM_ENB_B        = 0x800,
  429         AHC_INITIATORROLE     = 0x1000,  /*
  430                                           * Allow initiator operations on
  431                                           * this controller.
  432                                           */
  433         AHC_TARGETROLE        = 0x2000,  /*
  434                                           * Allow target operations on this
  435                                           * controller.
  436                                           */
  437         AHC_NEWEEPROM_FMT     = 0x4000,
  438         AHC_RESOURCE_SHORTAGE = 0x8000,
  439         AHC_TQINFIFO_BLOCKED  = 0x10000,  /* Blocked waiting for ATIOs */
  440         AHC_INT50_SPEEDFLEX   = 0x20000,  /*
  441                                            * Internal 50pin connector
  442                                            * sits behind an aic3860
  443                                            */
  444         AHC_SCB_BTT           = 0x40000,  /*
  445                                            * The busy targets table is
  446                                            * stored in SCB space rather
  447                                            * than SRAM.
  448                                            */
  449         AHC_BIOS_ENABLED      = 0x80000,
  450         AHC_ALL_INTERRUPTS    = 0x100000,
  451         AHC_PAGESCBS          = 0x400000,  /* Enable SCB paging */
  452         AHC_EDGE_INTERRUPT    = 0x800000,  /* Device uses edge triggered ints */
  453         AHC_39BIT_ADDRESSING  = 0x1000000, /* Use 39 bit addressing scheme. */
  454         AHC_LSCBS_ENABLED     = 0x2000000, /* 64Byte SCBs enabled */
  455         AHC_SCB_CONFIG_USED   = 0x4000000, /* No SEEPROM but SCB2 had info. */
  456         AHC_NO_BIOS_INIT      = 0x8000000, /* No BIOS left over settings. */
  457         AHC_DISABLE_PCI_PERR  = 0x10000000,
  458         AHC_USETARGETDEFAULTS = 0x20000000 /* 
  459                                             * For cards without an seeprom but
  460                                             * with BIOS which initializes chip's
  461                                             * SRAM with some conservative target
  462                                             * settings, we use the default
  463                                             * SCSI target settings.
  464                                             */
  465 } ahc_flag;
  466 
  467 /************************* Hardware  SCB Definition ***************************/
  468 
  469 /*
  470  * The driver keeps up to MAX_SCB scb structures per card in memory.  The SCB
  471  * consists of a "hardware SCB" mirroring the fields available on the card
  472  * and additional information the kernel stores for each transaction.
  473  *
  474  * To minimize space utilization, a portion of the hardware scb stores
  475  * different data during different portions of a SCSI transaction.
  476  * As initialized by the host driver for the initiator role, this area
  477  * contains the SCSI cdb (or a pointer to the  cdb) to be executed.  After
  478  * the cdb has been presented to the target, this area serves to store
  479  * residual transfer information and the SCSI status byte.
  480  * For the target role, the contents of this area do not change, but
  481  * still serve a different purpose than for the initiator role.  See
  482  * struct target_data for details.
  483  */
  484 
  485 /*
  486  * Status information embedded in the shared portion of
  487  * an SCB after passing the cdb to the target.  The kernel
  488  * driver will only read this data for transactions that
  489  * complete abnormally (non-zero status byte).
  490  */
  491 struct status_pkt {
  492         uint32_t residual_datacnt;      /* Residual in the current S/G seg */
  493         uint32_t residual_sg_ptr;       /* The next S/G for this transfer */
  494         uint8_t  scsi_status;           /* Standard SCSI status byte */
  495 };
  496 
  497 /*
  498  * Target mode version of the shared data SCB segment.
  499  */
  500 struct target_data {
  501         uint32_t residual_datacnt;      /* Residual in the current S/G seg */
  502         uint32_t residual_sg_ptr;       /* The next S/G for this transfer */
  503         uint8_t  scsi_status;           /* SCSI status to give to initiator */
  504         uint8_t  target_phases;         /* Bitmap of phases to execute */
  505         uint8_t  data_phase;            /* Data-In or Data-Out */
  506         uint8_t  initiator_tag;         /* Initiator's transaction tag */
  507 };
  508 
  509 struct hardware_scb {
  510 /**/   union {
  511                 /*
  512                  * If the cdb is 12 bytes or less, we embed it directly
  513                  * in the SCB.  For longer cdbs, we embed the address
  514                  * of the cdb payload as seen by the chip and a DMA
  515                  * is used to pull it in.
  516                  */
  517                 uint8_t  cdb[12];
  518                 uint32_t cdb_ptr;
  519                 struct   status_pkt status;
  520                 struct   target_data tdata;
  521         } shared_data;
  522 /*
  523  * A word about residuals.
  524  * The scb is presented to the sequencer with the dataptr and datacnt
  525  * fields initialized to the contents of the first S/G element to
  526  * transfer.  The sgptr field is initialized to the bus address for
  527  * the S/G element that follows the first in the in core S/G array
  528  * or'ed with the SG_FULL_RESID flag.  Sgptr may point to an invalid
  529  * S/G entry for this transfer (single S/G element transfer with the
  530  * first elements address and length preloaded in the dataptr/datacnt
  531  * fields).  If no transfer is to occur, sgptr is set to SG_LIST_NULL.
  532  * The SG_FULL_RESID flag ensures that the residual will be correctly
  533  * noted even if no data transfers occur.  Once the data phase is entered,
  534  * the residual sgptr and datacnt are loaded from the sgptr and the
  535  * datacnt fields.  After each S/G element's dataptr and length are
  536  * loaded into the hardware, the residual sgptr is advanced.  After
  537  * each S/G element is expired, its datacnt field is checked to see
  538  * if the LAST_SEG flag is set.  If so, SG_LIST_NULL is set in the
  539  * residual sg ptr and the transfer is considered complete.  If the
  540  * sequencer determines that there is a residual in the transfer, it
  541  * will set the SG_RESID_VALID flag in sgptr and DMA the scb back into
  542  * host memory.  To summarize:
  543  *
  544  * Sequencer:
  545  *      o A residual has occurred if SG_FULL_RESID is set in sgptr,
  546  *        or residual_sgptr does not have SG_LIST_NULL set.
  547  *
  548  *      o We are transfering the last segment if residual_datacnt has
  549  *        the SG_LAST_SEG flag set.
  550  *
  551  * Host:
  552  *      o A residual has occurred if a completed scb has the
  553  *        SG_RESID_VALID flag set.
  554  *
  555  *      o residual_sgptr and sgptr refer to the "next" sg entry
  556  *        and so may point beyond the last valid sg entry for the
  557  *        transfer.
  558  */
  559 /*12*/  uint32_t dataptr;
  560 /*16*/  uint32_t datacnt;               /*
  561                                          * Byte 3 (numbered from 0) of
  562                                          * the datacnt is really the
  563                                          * 4th byte in that data address.
  564                                          */
  565 /*20*/  uint32_t sgptr;
  566 #define SG_PTR_MASK     0xFFFFFFF8
  567 /*24*/  uint8_t  control;       /* See SCB_CONTROL in aic7xxx.reg for details */
  568 /*25*/  uint8_t  scsiid;        /* what to load in the SCSIID register */
  569 /*26*/  uint8_t  lun;
  570 /*27*/  uint8_t  tag;                   /*
  571                                          * Index into our kernel SCB array.
  572                                          * Also used as the tag for tagged I/O
  573                                          */
  574 /*28*/  uint8_t  cdb_len;
  575 /*29*/  uint8_t  scsirate;              /* Value for SCSIRATE register */
  576 /*30*/  uint8_t  scsioffset;            /* Value for SCSIOFFSET register */
  577 /*31*/  uint8_t  next;                  /*
  578                                          * Used for threading SCBs in the
  579                                          * "Waiting for Selection" and
  580                                          * "Disconnected SCB" lists down
  581                                          * in the sequencer.
  582                                          */
  583 /*32*/  uint8_t  cdb32[32];             /*
  584                                          * CDB storage for cdbs of size
  585                                          * 13->32.  We store them here
  586                                          * because hardware scbs are
  587                                          * allocated from DMA safe
  588                                          * memory so we are guaranteed
  589                                          * the controller can access
  590                                          * this data.
  591                                          */
  592 };
  593 
  594 /************************ Kernel SCB Definitions ******************************/
  595 /*
  596  * Some fields of the SCB are OS dependent.  Here we collect the
  597  * definitions for elements that all OS platforms need to include
  598  * in there SCB definition.
  599  */
  600 
  601 /*
  602  * Definition of a scatter/gather element as transferred to the controller.
  603  * The aic7xxx chips only support a 24bit length.  We use the top byte of
  604  * the length to store additional address bits and a flag to indicate
  605  * that a given segment terminates the transfer.  This gives us an
  606  * addressable range of 512GB on machines with 64bit PCI or with chips
  607  * that can support dual address cycles on 32bit PCI busses.
  608  */
  609 struct ahc_dma_seg {
  610         uint32_t        addr;
  611         uint32_t        len;
  612 #define AHC_DMA_LAST_SEG        0x80000000
  613 #define AHC_SG_HIGH_ADDR_MASK   0x7F000000
  614 #define AHC_SG_LEN_MASK         0x00FFFFFF
  615 };
  616 
  617 struct sg_map_node {
  618         bus_dmamap_t             sg_dmamap;
  619         bus_addr_t               sg_physaddr;
  620         bus_dma_segment_t        sg_dmasegs;
  621         int                      sg_nseg;
  622         struct ahc_dma_seg*      sg_vaddr;
  623         SLIST_ENTRY(sg_map_node) links;
  624 };
  625 
  626 struct ahc_pci_busdata {
  627         pci_chipset_tag_t pc;
  628         pcitag_t tag;
  629         u_int dev;
  630         u_int func;
  631         pcireg_t class;
  632 };
  633 
  634 /*
  635  * The current state of this SCB.
  636  */
  637 typedef enum {
  638         SCB_FREE                = 0x0000,
  639         SCB_OTHERTCL_TIMEOUT    = 0x0002,/*
  640                                           * Another device was active
  641                                           * during the first timeout for
  642                                           * this SCB so we gave ourselves
  643                                           * an additional timeout period
  644                                           * in case it was hogging the
  645                                           * bus.
  646                                           */
  647         SCB_DEVICE_RESET        = 0x0004,
  648         SCB_SENSE               = 0x0008,
  649         SCB_CDB32_PTR           = 0x0010,
  650         SCB_RECOVERY_SCB        = 0x0020,
  651         SCB_AUTO_NEGOTIATE      = 0x0040,/* Negotiate to achieve goal. */
  652         SCB_NEGOTIATE           = 0x0080,/* Negotiation forced for command. */
  653         SCB_ABORT               = 0x0100,
  654         SCB_UNTAGGEDQ           = 0x0200,
  655         SCB_ACTIVE              = 0x0400,
  656         SCB_TARGET_IMMEDIATE    = 0x0800,
  657         SCB_TRANSMISSION_ERROR  = 0x1000,/*
  658                                           * We detected a parity or CRC
  659                                           * error that has effected the
  660                                           * payload of the command.  This
  661                                           * flag is checked when normal
  662                                           * status is returned to catch
  663                                           * the case of a target not
  664                                           * responding to our attempt
  665                                           * to report the error.
  666                                           */
  667         SCB_TARGET_SCB          = 0x2000,
  668         SCB_SILENT              = 0x4000,/*
  669                                           * Be quiet about transmission type
  670                                           * errors.  They are expected and we
  671                                           * don't want to upset the user.  This
  672                                           * flag is typically used during DV.
  673                                           */
  674         SCB_FREEZE_QUEUE        = 0x8000
  675 } scb_flag;
  676 
  677 struct scb {
  678         struct  hardware_scb     *hscb;
  679         union {
  680                 SLIST_ENTRY(scb)  sle;
  681                 TAILQ_ENTRY(scb)  tqe;
  682         } links;
  683         LIST_ENTRY(scb)           pending_links;
  684 
  685         struct scsipi_xfer       *xs;
  686         struct ahc_softc         *ahc_softc;
  687         scb_flag                  flags;
  688 #ifndef __linux__
  689         bus_dmamap_t              dmamap;
  690 #endif
  691         struct scb_platform_data *platform_data;
  692         struct sg_map_node       *sg_map;
  693         struct ahc_dma_seg       *sg_list;
  694         bus_addr_t                sg_list_phys;
  695         u_int                     sg_count;/* How full ahc_dma_seg is */
  696 };
  697 
  698 struct scb_data {
  699         SLIST_HEAD(, scb) free_scbs;    /*
  700                                          * Pool of SCBs ready to be assigned
  701                                          * commands to execute.
  702                                          */
  703         struct  scb *scbindex[256];     /*
  704                                          * Mapping from tag to SCB.
  705                                          * As tag identifiers are an
  706                                          * 8bit value, we provide space
  707                                          * for all possible tag values.
  708                                          * Any lookups to entries at or
  709                                          * above AHC_SCB_MAX_ALLOC will
  710                                          * always fail.
  711                                          */
  712         struct  hardware_scb    *hscbs; /* Array of hardware SCBs */
  713         struct  scb *scbarray;          /* Array of kernel SCBs */
  714         struct  scsi_sense_data *sense; /* Per SCB sense data */
  715 
  716         /*
  717          * "Bus" addresses of our data structures.
  718          */
  719         bus_dmamap_t     hscb_dmamap;
  720         bus_addr_t       hscb_busaddr;
  721         bus_dma_segment_t hscb_seg;
  722         int               hscb_nseg;
  723         int               hscb_size;
  724 
  725         bus_dmamap_t     sense_dmamap;
  726         bus_addr_t       sense_busaddr;
  727         bus_dma_segment_t sense_seg;
  728         int               sense_nseg;
  729         int               sense_size;
  730 
  731         SLIST_HEAD(, sg_map_node) sg_maps;
  732         uint8_t numscbs;
  733         uint8_t maxhscbs;               /* Number of SCBs on the card */
  734         uint8_t init_level;             /*
  735                                          * How far we've initialized
  736                                          * this structure.
  737                                          */
  738 };
  739 
  740 /************************ Target Mode Definitions *****************************/
  741 
  742 /*
  743  * Connection desciptor for select-in requests in target mode.
  744  */
  745 struct target_cmd {
  746         uint8_t scsiid;         /* Our ID and the initiator's ID */
  747         uint8_t identify;       /* Identify message */
  748         uint8_t bytes[22];      /*
  749                                  * Bytes contains any additional message
  750                                  * bytes terminated by 0xFF.  The remainder
  751                                  * is the cdb to execute.
  752                                  */
  753         uint8_t cmd_valid;      /*
  754                                  * When a command is complete, the firmware
  755                                  * will set cmd_valid to all bits set.
  756                                  * After the host has seen the command,
  757                                  * the bits are cleared.  This allows us
  758                                  * to just peek at host memory to determine
  759                                  * if more work is complete. cmd_valid is on
  760                                  * an 8 byte boundary to simplify setting
  761                                  * it on aic7880 hardware which only has
  762                                  * limited direct access to the DMA FIFO.
  763                                  */
  764         uint8_t pad[7];
  765 };
  766 
  767 /*
  768  * Number of events we can buffer up if we run out
  769  * of immediate notify ccbs.
  770  */
  771 #define AHC_TMODE_EVENT_BUFFER_SIZE 8
  772 struct ahc_tmode_event {
  773         uint8_t initiator_id;
  774         uint8_t event_type;     /* MSG type or EVENT_TYPE_BUS_RESET */
  775 #define EVENT_TYPE_BUS_RESET 0xFF
  776         uint8_t event_arg;
  777 };
  778 
  779 /*
  780  * Per enabled lun target mode state.
  781  * As this state is directly influenced by the host OS'es target mode
  782  * environment, we let the OS module define it.  Forward declare the
  783  * structure here so we can store arrays of them, etc. in OS neutral
  784  * data structures.
  785  */
  786 #ifdef AHC_TARGET_MODE
  787 struct ahc_tmode_lstate {
  788 #if 0
  789         struct cam_path *path;
  790         struct ccb_hdr_slist accept_tios;
  791         struct ccb_hdr_slist immed_notifies;
  792 #endif
  793         struct ahc_tmode_event event_buffer[AHC_TMODE_EVENT_BUFFER_SIZE];
  794         uint8_t event_r_idx;
  795         uint8_t event_w_idx;
  796 };
  797 #else
  798 struct ahc_tmode_lstate;
  799 #endif
  800 
  801 /******************** Transfer Negotiation Datastructures *********************/
  802 #define AHC_TRANS_CUR           0x01    /* Modify current negotiation status */
  803 #define AHC_TRANS_ACTIVE        0x03    /* Assume this target is on the bus */
  804 #define AHC_TRANS_GOAL          0x04    /* Modify negotiation goal */
  805 #define AHC_TRANS_USER          0x08    /* Modify user negotiation settings */
  806 
  807 #define AHC_WIDTH_UNKNOWN       0xFF
  808 #define AHC_PERIOD_UNKNOWN      0xFF
  809 #define AHC_OFFSET_UNKNOWN      0x0
  810 #define AHC_PPR_OPTS_UNKNOWN    0xFF
  811 
  812 /*
  813  * Transfer Negotiation Information.
  814  */
  815 struct ahc_transinfo {
  816         uint8_t protocol_version;       /* SCSI Revision level */
  817         uint8_t transport_version;      /* SPI Revision level */
  818         uint8_t width;                  /* Bus width */
  819         uint8_t period;                 /* Sync rate factor */
  820         uint8_t offset;                 /* Sync offset */
  821         uint8_t ppr_options;            /* Parallel Protocol Request options */
  822 };
  823 
  824 /*
  825  * Per-initiator current, goal and user transfer negotiation information. */
  826 struct ahc_initiator_tinfo {
  827         uint8_t scsirate;               /* Computed value for SCSIRATE reg */
  828         struct ahc_transinfo curr;
  829         struct ahc_transinfo goal;
  830         struct ahc_transinfo user;
  831 };
  832 
  833 /*
  834  * Per enabled target ID state.
  835  * Pointers to lun target state as well as sync/wide negotiation information
  836  * for each initiator<->target mapping.  For the initiator role we pretend
  837  * that we are the target and the targets are the initiators since the
  838  * negotiation is the same regardless of role.
  839  */
  840 struct ahc_tmode_tstate {
  841         struct ahc_tmode_lstate*        enabled_luns[AHC_NUM_LUNS];
  842         struct ahc_initiator_tinfo      transinfo[AHC_NUM_TARGETS];
  843 
  844         /*
  845          * Per initiator state bitmasks.
  846          */
  847         uint16_t         auto_negotiate;/* Auto Negotiation Required */
  848         uint16_t         ultraenb;      /* Using ultra sync rate  */
  849         uint16_t         discenable;    /* Disconnection allowed  */
  850         uint16_t         tagenable;     /* Tagged Queuing allowed */
  851 };
  852 
  853 /*
  854  * Data structure for our table of allowed synchronous transfer rates.
  855  */
  856 struct ahc_syncrate {
  857         u_int sxfr_u2;  /* Value of the SXFR parameter for Ultra2+ Chips */
  858         u_int sxfr;     /* Value of the SXFR parameter for <= Ultra Chips */
  859 #define         ULTRA_SXFR 0x100        /* Rate Requires Ultra Mode set */
  860 #define         ST_SXFR    0x010        /* Rate Single Transition Only */
  861 #define         DT_SXFR    0x040        /* Rate Double Transition Only */
  862         uint8_t period; /* Period to send to SCSI target */
  863         const char *rate;
  864 };
  865 
  866 /* Safe and valid period for async negotiations. */
  867 #define AHC_ASYNC_XFER_PERIOD 0x45
  868 #define AHC_ULTRA2_XFER_PERIOD 0x0a
  869 
  870 /*
  871  * Indexes into our table of syncronous transfer rates.
  872  */
  873 #define AHC_SYNCRATE_DT         0
  874 #define AHC_SYNCRATE_ULTRA2     1
  875 #define AHC_SYNCRATE_ULTRA      3
  876 #define AHC_SYNCRATE_FAST       6
  877 #define AHC_SYNCRATE_MAX        AHC_SYNCRATE_DT
  878 #define AHC_SYNCRATE_MIN        13
  879 
  880 /***************************** Lookup Tables **********************************/
  881 /*
  882  * Phase -> name and message out response
  883  * to parity errors in each phase table.
  884  */
  885 struct ahc_phase_table_entry {
  886         uint8_t phase;
  887         uint8_t mesg_out; /* Message response to parity errors */
  888         const char *phasemsg;
  889 };
  890 
  891 /************************** Serial EEPROM Format ******************************/
  892 
  893 struct seeprom_config {
  894 /*
  895  * Per SCSI ID Configuration Flags
  896  */
  897         uint16_t device_flags[16];      /* words 0-15 */
  898 #define         CFXFER          0x0007  /* synchronous transfer rate */
  899 #define         CFSYNCH         0x0008  /* enable synchronous transfer */
  900 #define         CFDISC          0x0010  /* enable disconnection */
  901 #define         CFWIDEB         0x0020  /* wide bus device */
  902 #define         CFSYNCHISULTRA  0x0040  /* CFSYNCH is an ultra offset (2940AU)*/
  903 #define         CFSYNCSINGLE    0x0080  /* Single-Transition signalling */
  904 #define         CFSTART         0x0100  /* send start unit SCSI command */
  905 #define         CFINCBIOS       0x0200  /* include in BIOS scan */
  906 #define         CFRNFOUND       0x0400  /* report even if not found */
  907 #define         CFMULTILUNDEV   0x0800  /* Probe multiple luns in BIOS scan */
  908 #define         CFWBCACHEENB    0x4000  /* Enable W-Behind Cache on disks */
  909 #define         CFWBCACHENOP    0xc000  /* Don't touch W-Behind Cache */
  910 
  911 /*
  912  * BIOS Control Bits
  913  */
  914         uint16_t bios_control;          /* word 16 */
  915 #define         CFSUPREM        0x0001  /* support all removable drives */
  916 #define         CFSUPREMB       0x0002  /* support removable boot drives */
  917 #define         CFBIOSEN        0x0004  /* BIOS enabled */
  918 #define         CFBIOS_BUSSCAN  0x0008  /* Have the BIOS Scan the Bus */
  919 #define         CFSM2DRV        0x0010  /* support more than two drives */
  920 #define         CFSTPWLEVEL     0x0010  /* Termination level control */
  921 #define         CF284XEXTEND    0x0020  /* extended translation (284x cards) */
  922 #define         CFCTRL_A        0x0020  /* BIOS displays Ctrl-A message */
  923 #define         CFTERM_MENU     0x0040  /* BIOS displays termination menu */
  924 #define         CFEXTEND        0x0080  /* extended translation enabled */
  925 #define         CFSCAMEN        0x0100  /* SCAM enable */
  926 #define         CFMSG_LEVEL     0x0600  /* BIOS Message Level */
  927 #define                 CFMSG_VERBOSE   0x0000
  928 #define                 CFMSG_SILENT    0x0200
  929 #define                 CFMSG_DIAG      0x0400
  930 #define         CFBOOTCD        0x0800  /* Support Bootable CD-ROM */
  931 /*              UNUSED          0xff00  */
  932 
  933 /*
  934  * Host Adapter Control Bits
  935  */
  936         uint16_t adapter_control;       /* word 17 */
  937 #define         CFAUTOTERM      0x0001  /* Perform Auto termination */
  938 #define         CFULTRAEN       0x0002  /* Ultra SCSI speed enable */
  939 #define         CF284XSELTO     0x0003  /* Selection timeout (284x cards) */
  940 #define         CF284XFIFO      0x000C  /* FIFO Threshold (284x cards) */
  941 #define         CFSTERM         0x0004  /* SCSI low byte termination */
  942 #define         CFWSTERM        0x0008  /* SCSI high byte termination */
  943 #define         CFSPARITY       0x0010  /* SCSI parity */
  944 #define         CF284XSTERM     0x0020  /* SCSI low byte term (284x cards) */
  945 #define         CFMULTILUN      0x0020
  946 #define         CFRESETB        0x0040  /* reset SCSI bus at boot */
  947 #define         CFCLUSTERENB    0x0080  /* Cluster Enable */
  948 #define         CFBOOTCHAN      0x0300  /* probe this channel first */
  949 #define         CFBOOTCHANSHIFT 8
  950 #define         CFSEAUTOTERM    0x0400  /* Ultra2 Perform secondary Auto Term*/
  951 #define         CFSELOWTERM     0x0800  /* Ultra2 secondary low term */
  952 #define         CFSEHIGHTERM    0x1000  /* Ultra2 secondary high term */
  953 #define         CFENABLEDV      0x4000  /* Perform Domain Validation*/
  954 
  955 /*
  956  * Bus Release Time, Host Adapter ID
  957  */
  958         uint16_t brtime_id;             /* word 18 */
  959 #define         CFSCSIID        0x000f  /* host adapter SCSI ID */
  960 /*              UNUSED          0x00f0  */
  961 #define         CFBRTIME        0xff00  /* bus release time */
  962 
  963 /*
  964  * Maximum targets
  965  */
  966         uint16_t max_targets;           /* word 19 */
  967 #define         CFMAXTARG       0x00ff  /* maximum targets */
  968 #define         CFBOOTLUN       0x0f00  /* Lun to boot from */
  969 #define         CFBOOTID        0xf000  /* Target to boot from */
  970         uint16_t res_1[10];             /* words 20-29 */
  971         uint16_t signature;             /* Signature == 0x250 */
  972 #define         CFSIGNATURE     0x250
  973 #define         CFSIGNATURE2    0x300
  974         uint16_t checksum;              /* word 31 */
  975 };
  976 
  977 /****************************  Message Buffer *********************************/
  978 typedef enum {
  979         MSG_TYPE_NONE                   = 0x00,
  980         MSG_TYPE_INITIATOR_MSGOUT       = 0x01,
  981         MSG_TYPE_INITIATOR_MSGIN        = 0x02,
  982         MSG_TYPE_TARGET_MSGOUT          = 0x03,
  983         MSG_TYPE_TARGET_MSGIN           = 0x04
  984 } ahc_msg_type;
  985 
  986 typedef enum {
  987         MSGLOOP_IN_PROG,
  988         MSGLOOP_MSGCOMPLETE,
  989         MSGLOOP_TERMINATED
  990 } msg_loop_stat;
  991 
  992 /*********************** Software Configuration Structure *********************/
  993 TAILQ_HEAD(scb_tailq, scb);
  994 
  995 struct ahc_suspend_channel_state {
  996         uint8_t scsiseq;
  997         uint8_t sxfrctl0;
  998         uint8_t sxfrctl1;
  999         uint8_t simode0;
 1000         uint8_t simode1;
 1001         uint8_t seltimer;
 1002         uint8_t seqctl;
 1003 };
 1004 
 1005 struct ahc_suspend_state {
 1006         struct  ahc_suspend_channel_state channel[2];
 1007         uint8_t optionmode;
 1008         uint8_t dscommand0;
 1009         uint8_t dspcistatus;
 1010         /* hsmailbox */
 1011         uint8_t crccontrol1;
 1012         uint8_t scbbaddr;
 1013         /* Host and sequencer SCB counts */
 1014         uint8_t dff_thrsh;
 1015         uint8_t *scratch_ram;
 1016         uint8_t *btt;
 1017 };
 1018 
 1019 typedef void (*ahc_bus_intr_t)(struct ahc_softc *);
 1020 typedef void ahc_callback_t (void *);
 1021 
 1022 struct ahc_softc {
 1023         struct device             sc_dev;
 1024 
 1025         struct scsipi_channel     sc_channel;
 1026         struct scsipi_channel     sc_channel_b;
 1027         struct device *           sc_child;
 1028         struct device *           sc_child_b;
 1029         struct scsipi_adapter     sc_adapter;
 1030 
 1031         bus_space_tag_t           tag;
 1032         bus_space_handle_t        bsh;
 1033 
 1034 #ifndef __linux__
 1035         bus_dma_tag_t             buffer_dmat;   /* dmat for buffer I/O */
 1036 #endif
 1037         struct scb_data          *scb_data;
 1038 
 1039         struct scb               *next_queued_scb;
 1040 
 1041         /*
 1042          * SCBs that have been sent to the controller
 1043          */
 1044         LIST_HEAD(, scb)          pending_scbs;
 1045 
 1046         /*
 1047          * Counting lock for deferring the release of additional
 1048          * untagged transactions from the untagged_queues.  When
 1049          * the lock is decremented to 0, all queues in the
 1050          * untagged_queues array are run.
 1051          */
 1052         u_int                     untagged_queue_lock;
 1053 
 1054         /*
 1055          * Per-target queue of untagged-transactions.  The
 1056          * transaction at the head of the queue is the
 1057          * currently pending untagged transaction for the
 1058          * target.  The driver only allows a single untagged
 1059          * transaction per target.
 1060          */
 1061         struct scb_tailq          untagged_queues[AHC_NUM_TARGETS];
 1062 
 1063         /*
 1064          * Platform specific data.
 1065          */
 1066         struct ahc_platform_data *platform_data;
 1067 
 1068         /*
 1069          * Platform specific device information.
 1070          */
 1071         /* ahc_dev_softc_t                dev_softc; */
 1072 
 1073         /*
 1074          * Bus specific device information.
 1075          */
 1076         ahc_bus_intr_t            bus_intr;
 1077 
 1078         /*
 1079          * Target mode related state kept on a per enabled lun basis.
 1080          * Targets that are not enabled will have null entries.
 1081          * As an initiator, we keep one target entry for our initiator
 1082          * ID to store our sync/wide transfer settings.
 1083          */
 1084         struct ahc_tmode_tstate  *enabled_targets[AHC_NUM_TARGETS];
 1085 
 1086         char inited_target[AHC_NUM_TARGETS];
 1087 
 1088         /*
 1089          * The black hole device responsible for handling requests for
 1090          * disabled luns on enabled targets.
 1091          */
 1092         struct ahc_tmode_lstate  *black_hole;
 1093 
 1094         /*
 1095          * Device instance currently on the bus awaiting a continue TIO
 1096          * for a command that was not given the disconnect priviledge.
 1097          */
 1098         struct ahc_tmode_lstate  *pending_device;
 1099 
 1100         /*
 1101          * Card characteristics
 1102          */
 1103         ahc_chip                  chip;
 1104         ahc_feature               features;
 1105         ahc_bug                   bugs;
 1106         ahc_flag                  flags;
 1107         struct seeprom_config    *seep_config;
 1108 
 1109         /* Values to store in the SEQCTL register for pause and unpause */
 1110         uint8_t                   unpause;
 1111         uint8_t                   pause;
 1112 
 1113         /* Command Queues */
 1114         uint8_t                   qoutfifonext;
 1115         uint8_t                   qinfifonext;
 1116         uint8_t                  *qoutfifo;
 1117         uint8_t                  *qinfifo;
 1118 
 1119         /* Critical Section Data */
 1120         struct cs                *critical_sections;
 1121         u_int                     num_critical_sections;
 1122 
 1123         /* Links for chaining softcs */
 1124         TAILQ_ENTRY(ahc_softc)    links;
 1125 
 1126         /* Channel Names ('A', 'B', etc.) */
 1127         char                      channel;
 1128 
 1129         /* Initiator Bus ID */
 1130         uint8_t                   our_id;
 1131         uint8_t                   our_id_b;
 1132 
 1133         /*
 1134          * PCI error detection.
 1135          */
 1136         int                       unsolicited_ints;
 1137 
 1138         /*
 1139          * Target incoming command FIFO.
 1140          */
 1141         struct target_cmd        *targetcmds;
 1142         uint8_t                   tqinfifonext;
 1143 
 1144         /*
 1145          * Incoming and outgoing message handling.
 1146          */
 1147         uint8_t                   send_msg_perror;
 1148         ahc_msg_type              msg_type;
 1149         uint8_t                   msgout_buf[12];/* Message we are sending */
 1150         uint8_t                   msgin_buf[12];/* Message we are receiving */
 1151         u_int                     msgout_len;   /* Length of message to send */
 1152         u_int                     msgout_index; /* Current index in msgout */
 1153         u_int                     msgin_index;  /* Current index in msgin */
 1154 
 1155         /* Interrupt routine */
 1156         void                     *ih;
 1157 
 1158         /*
 1159          * Mapping information for data structures shared
 1160          * between the sequencer and kernel.
 1161          */
 1162         bus_dma_tag_t             parent_dmat;
 1163         bus_dmamap_t              shared_data_dmamap;
 1164         bus_addr_t                shared_data_busaddr;
 1165 
 1166         bus_dma_segment_t         shared_data_seg;
 1167         int                       shared_data_nseg;
 1168         int                       shared_data_size;
 1169         int                       sc_dmaflags;
 1170 
 1171         /*
 1172          * Bus address of the one byte buffer used to
 1173          * work-around a DMA bug for chips <= aic7880
 1174          * in target mode.
 1175          */
 1176         bus_addr_t                dma_bug_buf;
 1177 
 1178         /* Information saved through suspend/resume cycles */
 1179         struct ahc_suspend_state  suspend_state;
 1180 
 1181         /* Number of enabled target mode device on this card */
 1182         u_int                     enabled_luns;
 1183 
 1184         /* Initialization level of this data structure */
 1185         u_int                     init_level;
 1186 
 1187         /* PCI cacheline size. */
 1188         u_int                     pci_cachesize;
 1189 
 1190         u_int                     stack_size;
 1191 
 1192         /* Per-Unit descriptive information */
 1193         const char               *description;
 1194         const char               *name;
 1195         int                       unit;
 1196 
 1197         /* Selection Timer settings */
 1198         int                       seltime;
 1199         int                       seltime_b;
 1200 
 1201         uint16_t                  user_discenable;/* Disconnection allowed  */
 1202         uint16_t                  user_tagenable;/* Tagged Queuing allowed */
 1203 
 1204         struct ahc_pci_busdata    *bd;
 1205 };
 1206 
 1207 TAILQ_HEAD(ahc_softc_tailq, ahc_softc);
 1208 extern struct ahc_softc_tailq ahc_tailq;
 1209 
 1210 /************************ Active Device Information ***************************/
 1211 typedef enum {
 1212         ROLE_UNKNOWN,
 1213         ROLE_INITIATOR,
 1214         ROLE_TARGET
 1215 } role_t;
 1216 
 1217 struct ahc_devinfo {
 1218         int      our_scsiid;
 1219         int      target_offset;
 1220         uint16_t target_mask;
 1221         u_int    target;
 1222         u_int    lun;
 1223         char     channel;
 1224         role_t   role;          /*
 1225                                  * Only guaranteed to be correct if not
 1226                                  * in the busfree state.
 1227                                  */
 1228 };
 1229 
 1230 /****************************** PCI Structures ********************************/
 1231 typedef int (ahc_device_setup_t)(struct ahc_softc *);
 1232 
 1233 struct ahc_pci_identity {
 1234         uint64_t                 full_id;
 1235         uint64_t                 id_mask;
 1236         const char              *name;
 1237         ahc_device_setup_t      *setup;
 1238 };
 1239 
 1240 /***************************** VL/EISA Declarations ***************************/
 1241 struct aic7770_identity {
 1242         uint32_t                 full_id;
 1243         uint32_t                 id_mask;
 1244         char                    *name;
 1245         ahc_device_setup_t      *setup;
 1246 };
 1247 extern struct aic7770_identity aic7770_ident_table [];
 1248 extern const int ahc_num_aic7770_devs;
 1249 
 1250 #define AHC_EISA_SLOT_OFFSET    0xc00
 1251 #define AHC_EISA_IOSIZE         0x100
 1252 
 1253 /*************************** Function Declarations ****************************/
 1254 /******************************************************************************/
 1255 u_int                   ahc_index_busy_tcl(struct ahc_softc *, u_int);
 1256 void                    ahc_unbusy_tcl(struct ahc_softc *, u_int);
 1257 void                    ahc_busy_tcl(struct ahc_softc *, u_int, u_int);
 1258 
 1259 /*************************** EISA/VL Front End ********************************/
 1260 struct aic7770_identity *aic7770_find_device(uint32_t);
 1261 int                      aic7770_config(struct ahc_softc *,
 1262                             struct aic7770_identity *, u_int);
 1263 
 1264 /************************** SCB and SCB queue management **********************/
 1265 int             ahc_probe_scbs(struct ahc_softc *);
 1266 void            ahc_run_untagged_queues(struct ahc_softc *);
 1267 void            ahc_run_untagged_queue(struct ahc_softc *, struct scb_tailq *);
 1268 void            ahc_qinfifo_requeue_tail(struct ahc_softc *, struct scb *);
 1269 int             ahc_match_scb(struct ahc_softc *, struct scb *,
 1270                     int, char, int, u_int, role_t);
 1271 
 1272 /****************************** Initialization ********************************/
 1273 int                      ahc_softc_init(struct ahc_softc *);
 1274 void                     ahc_controller_info(struct ahc_softc *, char *, size_t);
 1275 int                      ahc_init(struct ahc_softc *);
 1276 void                     ahc_intr_enable(struct ahc_softc *, int);
 1277 void                     ahc_pause_and_flushwork(struct ahc_softc *);
 1278 int                      ahc_suspend(struct ahc_softc *);
 1279 int                      ahc_resume(struct ahc_softc *);
 1280 void                     ahc_softc_insert(struct ahc_softc *);
 1281 struct ahc_softc        *ahc_find_softc(struct ahc_softc *);
 1282 void                     ahc_set_unit(struct ahc_softc *, int);
 1283 void                     ahc_set_name(struct ahc_softc *, const char *);
 1284 int                      ahc_alloc_scbs(struct ahc_softc *);
 1285 void                     ahc_free(struct ahc_softc *);
 1286 int                      ahc_reset(struct ahc_softc *);
 1287 void                     ahc_shutdown(void *);
 1288 
 1289 /*************************** Interrupt Services *******************************/
 1290 void                    ahc_clear_intstat(struct ahc_softc *);
 1291 void                    ahc_run_qoutfifo(struct ahc_softc *);
 1292 #ifdef AHC_TARGET_MODE
 1293 void                    ahc_run_tqinfifo(struct ahc_softc *, int);
 1294 #endif
 1295 void                    ahc_handle_brkadrint(struct ahc_softc *);
 1296 void                    ahc_handle_seqint(struct ahc_softc *, u_int);
 1297 void                    ahc_handle_scsiint(struct ahc_softc *, u_int);
 1298 void                    ahc_clear_critical_section(struct ahc_softc *);
 1299 
 1300 /***************************** Error Recovery *********************************/
 1301 typedef enum {
 1302         SEARCH_COMPLETE,
 1303         SEARCH_COUNT,
 1304         SEARCH_REMOVE
 1305 } ahc_search_action;
 1306 int                     ahc_search_qinfifo(struct ahc_softc *, int, char,
 1307                             int, u_int, role_t, uint32_t, ahc_search_action);
 1308 int                     ahc_search_untagged_queues(struct ahc_softc *,
 1309                             struct scsipi_xfer *, int, char, int, uint32_t,
 1310                             ahc_search_action);
 1311 int                     ahc_search_disc_list(struct ahc_softc *, int, char,
 1312                             int, u_int, int, int, int);
 1313 void                    ahc_freeze_devq(struct ahc_softc *, struct scb *);
 1314 int                     ahc_reset_channel(struct ahc_softc *, char, int);
 1315 int                     ahc_abort_scbs(struct ahc_softc *, int, char, int,
 1316                             u_int, role_t, uint32_t);
 1317 void                    ahc_restart(struct ahc_softc *);
 1318 void                    ahc_calc_residual(struct ahc_softc *, struct scb *);
 1319 /*************************** Utility Functions ********************************/
 1320 struct ahc_phase_table_entry*
 1321                         ahc_lookup_phase_entry(int);
 1322 void                    ahc_compile_devinfo(struct ahc_devinfo *, u_int, u_int,
 1323                             u_int, char, role_t);
 1324 /************************** Transfer Negotiation ******************************/
 1325 struct ahc_syncrate*    ahc_find_syncrate(struct ahc_softc *, u_int *,
 1326                             u_int *, u_int);
 1327 u_int                   ahc_find_period(struct ahc_softc *, u_int, u_int);
 1328 void                    ahc_validate_offset(struct ahc_softc *,
 1329                             struct ahc_initiator_tinfo *, struct ahc_syncrate *,
 1330                             u_int *, int, role_t);
 1331 void                    ahc_validate_width(struct ahc_softc *,
 1332                             struct ahc_initiator_tinfo *, u_int *, role_t);
 1333 /*
 1334  * Negotiation types.  These are used to qualify if we should renegotiate
 1335  * even if our goal and current transport parameters are identical.
 1336  */
 1337 typedef enum {
 1338         AHC_NEG_TO_GOAL,        /* Renegotiate only if goal and curr differ. */
 1339         AHC_NEG_IF_NON_ASYNC,   /* Renegotiate so long as goal is non-async. */
 1340         AHC_NEG_ALWAYS          /* Renegotiat even if goal is async. */
 1341 } ahc_neg_type;
 1342 int                     ahc_update_neg_request(struct ahc_softc *,
 1343                             struct ahc_devinfo *, struct ahc_tmode_tstate *,
 1344                             struct ahc_initiator_tinfo*, ahc_neg_type);
 1345 void                    ahc_set_width(struct ahc_softc *, struct ahc_devinfo *,
 1346                             u_int, u_int, int);
 1347 void                    ahc_set_syncrate(struct ahc_softc *,
 1348                             struct ahc_devinfo *, struct ahc_syncrate *,
 1349                             u_int, u_int, u_int, u_int, int);
 1350 typedef enum {
 1351         AHC_QUEUE_NONE,
 1352         AHC_QUEUE_BASIC,
 1353         AHC_QUEUE_TAGGED
 1354 } ahc_queue_alg;
 1355 
 1356 void                    ahc_set_tags(struct ahc_softc *, struct ahc_devinfo *,
 1357                             ahc_queue_alg);
 1358 
 1359 /**************************** Target Mode *************************************/
 1360 #ifdef AHC_TARGET_MODE
 1361 void            ahc_send_lstate_events(struct ahc_softc *,
 1362                     struct ahc_tmode_lstate *);
 1363 void            ahc_handle_en_lun(struct ahc_softc *, struct scsipi_xfer *);
 1364 cam_status      ahc_find_tmode_devs(struct ahc_softc *,
 1365                     struct ahc_tmode_tstate **, struct ahc_tmode_lstate **,
 1366                     int);
 1367 #ifndef AHC_TMODE_ENABLE
 1368 #define AHC_TMODE_ENABLE 0
 1369 #endif
 1370 #endif
 1371 /******************************* Debug ***************************************/
 1372 #ifdef AHC_DEBUG
 1373 extern uint32_t ahc_debug;
 1374 #define AHC_SHOW_MISC           0x0001
 1375 #define AHC_SHOW_SENSE          0x0002
 1376 #define AHC_DUMP_SEEPROM        0x0004
 1377 #define AHC_SHOW_TERMCTL        0x0008
 1378 #define AHC_SHOW_MEMORY         0x0010
 1379 #define AHC_SHOW_MESSAGES       0x0020
 1380 #define AHC_SHOW_DV             0x0040
 1381 #define AHC_SHOW_SELTO          0x0080
 1382 #define AHC_SHOW_QFULL          0x0200
 1383 #define AHC_SHOW_QUEUE          0x0400
 1384 #define AHC_SHOW_TQIN           0x0800
 1385 #define AHC_SHOW_MASKED_ERRORS  0x1000
 1386 #define AHC_DEBUG_SEQUENCER     0x2000
 1387 #endif
 1388 void                    ahc_print_scb(struct scb *);
 1389 void                    ahc_print_devinfo(struct ahc_softc *,
 1390                             struct ahc_devinfo *);
 1391 void                    ahc_dump_card_state(struct ahc_softc *);
 1392 int                     ahc_print_register(ahc_reg_parse_entry_t *, u_int,
 1393                             const char *, u_int, u_int, u_int *, u_int);
 1394 /******************************* SEEPROM *************************************/
 1395 int             ahc_acquire_seeprom(struct ahc_softc *,
 1396                     struct seeprom_descriptor *);
 1397 void            ahc_release_seeprom(struct seeprom_descriptor *);
 1398 
 1399 void            ahc_check_extport(struct ahc_softc *, u_int *);
 1400 #endif /* _AIC7XXXVAR_H_ */

Cache object: ee4bee1d9f2bbc293667c6fb114c660d


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.