The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/athrate-amrr.c

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*      $NetBSD: athrate-amrr.c,v 1.13 2019/11/10 21:16:35 chs Exp $ */
    2 
    3 /*-
    4  * Copyright (c) 2004 INRIA
    5  * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
    6  * All rights reserved.
    7  *
    8  * Redistribution and use in source and binary forms, with or without
    9  * modification, are permitted provided that the following conditions
   10  * are met:
   11  * 1. Redistributions of source code must retain the above copyright
   12  *    notice, this list of conditions and the following disclaimer,
   13  *    without modification.
   14  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
   15  *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
   16  *    redistribution must be conditioned upon including a substantially
   17  *    similar Disclaimer requirement for further binary redistribution.
   18  * 3. Neither the names of the above-listed copyright holders nor the names
   19  *    of any contributors may be used to endorse or promote products derived
   20  *    from this software without specific prior written permission.
   21  *
   22  * Alternatively, this software may be distributed under the terms of the
   23  * GNU General Public License ("GPL") version 2 as published by the Free
   24  * Software Foundation.
   25  *
   26  * NO WARRANTY
   27  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   28  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   29  * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
   30  * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
   31  * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
   32  * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
   33  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
   34  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
   35  * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
   36  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
   37  * THE POSSIBILITY OF SUCH DAMAGES.
   38  *
   39  */
   40 
   41 #include <sys/cdefs.h>
   42 #ifdef __FreeBSD__
   43 __FBSDID("$FreeBSD: src/sys/dev/ath/ath_rate/amrr/amrr.c,v 1.10 2005/08/09 10:19:43 rwatson Exp $");
   44 #endif
   45 #ifdef __NetBSD__
   46 __KERNEL_RCSID(0, "$NetBSD: athrate-amrr.c,v 1.13 2019/11/10 21:16:35 chs Exp $");
   47 #endif
   48 
   49 /*
   50  * AMRR rate control. See:
   51  * http://www-sop.inria.fr/rapports/sophia/RR-5208.html
   52  * "IEEE 802.11 Rate Adaptation: A Practical Approach" by
   53  *    Mathieu Lacage, Hossein Manshaei, Thierry Turletti
   54  */
   55 #include "opt_inet.h"
   56 
   57 #include <sys/param.h>
   58 #include <sys/systm.h> 
   59 #include <sys/sysctl.h>
   60 #include <sys/kernel.h>
   61 #include <sys/errno.h>
   62 #include <sys/bus.h>
   63 #include <sys/socket.h>
   64  
   65 #include <net/if.h>
   66 #include <net/if_media.h>
   67 #include <net/if_arp.h>
   68 #include <net/if_ether.h>               /* XXX for ether_sprintf */
   69 
   70 #include <net80211/ieee80211_var.h>
   71 
   72 #include <net/bpf.h>
   73 
   74 #ifdef INET
   75 #include <netinet/in.h> 
   76 #endif
   77 
   78 #include <dev/ic/athvar.h>
   79 #include <dev/ic/athrate-amrr.h>
   80 
   81 #include <external/isc/atheros_hal/dist/ah.h>
   82 
   83 #define AMRR_DEBUG
   84 #ifdef AMRR_DEBUG
   85 #define DPRINTF(sc, _fmt, ...) do {                                     \
   86         if (sc->sc_debug & 0x10)                                        \
   87                 printf(_fmt, __VA_ARGS__);                              \
   88 } while (0)
   89 #else
   90 #define DPRINTF(sc, _fmt, ...)
   91 #endif
   92 
   93 static  int ath_rateinterval = 1000;            /* rate ctl interval (ms)  */
   94 static  int ath_rate_max_success_threshold = 10;
   95 static  int ath_rate_min_success_threshold = 1;
   96 
   97 static void     ath_ratectl(void *);
   98 static void     ath_rate_update(struct ath_softc *, struct ieee80211_node *,
   99                         int rate);
  100 static void     ath_rate_ctl_start(struct ath_softc *, struct ieee80211_node *);
  101 static void     ath_rate_ctl(void *, struct ieee80211_node *);
  102 
  103 void
  104 ath_rate_node_init(struct ath_softc *sc, struct ath_node *an)
  105 {
  106         /* NB: assumed to be zero'd by caller */
  107         ath_rate_update(sc, &an->an_node, 0);
  108 }
  109 
  110 void
  111 ath_rate_node_cleanup(struct ath_softc *sc, struct ath_node *an)
  112 {
  113 }
  114 
  115 void
  116 ath_rate_findrate(struct ath_softc *sc, struct ath_node *an,
  117         int shortPreamble, size_t frameLen,
  118         u_int8_t *rix, int *try0, u_int8_t *txrate)
  119 {
  120         struct amrr_node *amn = ATH_NODE_AMRR(an);
  121 
  122         *rix = amn->amn_tx_rix0;
  123         *try0 = amn->amn_tx_try0;
  124         if (shortPreamble)
  125                 *txrate = amn->amn_tx_rate0sp;
  126         else
  127                 *txrate = amn->amn_tx_rate0;
  128 }
  129 
  130 void
  131 ath_rate_setupxtxdesc(struct ath_softc *sc, struct ath_node *an,
  132         struct ath_desc *ds, int shortPreamble, u_int8_t rix)
  133 {
  134         struct amrr_node *amn = ATH_NODE_AMRR(an);
  135 
  136         ath_hal_setupxtxdesc(sc->sc_ah, ds
  137                 , amn->amn_tx_rate1sp, amn->amn_tx_try1 /* series 1 */
  138                 , amn->amn_tx_rate2sp, amn->amn_tx_try2 /* series 2 */
  139                 , amn->amn_tx_rate3sp, amn->amn_tx_try3 /* series 3 */
  140         );
  141 }
  142 
  143 void
  144 ath_rate_tx_complete(struct ath_softc *sc, struct ath_node *an,
  145         const struct ath_desc *ds, const struct ath_desc *ds0)
  146 {
  147         struct amrr_node *amn = ATH_NODE_AMRR(an);
  148         int sr = ds->ds_txstat.ts_shortretry;
  149         int lr = ds->ds_txstat.ts_longretry;
  150         int retry_count = sr + lr;
  151 
  152         amn->amn_tx_try0_cnt++;
  153         if (retry_count == 1) {
  154                 amn->amn_tx_try1_cnt++;
  155         } else if (retry_count == 2) {
  156                 amn->amn_tx_try1_cnt++;
  157                 amn->amn_tx_try2_cnt++;
  158         } else if (retry_count == 3) {
  159                 amn->amn_tx_try1_cnt++;
  160                 amn->amn_tx_try2_cnt++;
  161                 amn->amn_tx_try3_cnt++;
  162         } else if (retry_count > 3) {
  163                 amn->amn_tx_try1_cnt++;
  164                 amn->amn_tx_try2_cnt++;
  165                 amn->amn_tx_try3_cnt++;
  166                 amn->amn_tx_failure_cnt++;
  167         }
  168 }
  169 
  170 void
  171 ath_rate_newassoc(struct ath_softc *sc, struct ath_node *an, int isnew)
  172 {
  173         if (isnew)
  174                 ath_rate_ctl_start(sc, &an->an_node);
  175 }
  176 
  177 static void 
  178 node_reset (struct amrr_node *amn)
  179 {
  180         amn->amn_tx_try0_cnt = 0;
  181         amn->amn_tx_try1_cnt = 0;
  182         amn->amn_tx_try2_cnt = 0;
  183         amn->amn_tx_try3_cnt = 0;
  184         amn->amn_tx_failure_cnt = 0;
  185         amn->amn_success = 0;
  186         amn->amn_recovery = 0;
  187         amn->amn_success_threshold = ath_rate_min_success_threshold;
  188 }
  189 
  190 
  191 /**
  192  * The code below assumes that we are dealing with hardware multi rate retry
  193  * I have no idea what will happen if you try to use this module with another
  194  * type of hardware. Your machine might catch fire or it might work with
  195  * horrible performance...
  196  */
  197 static void
  198 ath_rate_update(struct ath_softc *sc, struct ieee80211_node *ni, int rate)
  199 {
  200         struct ath_node *an = ATH_NODE(ni);
  201         struct amrr_node *amn = ATH_NODE_AMRR(an);
  202         const HAL_RATE_TABLE *rt = sc->sc_currates;
  203         u_int8_t rix;
  204 
  205         KASSERTMSG(rt != NULL, "no rate table, mode %u", sc->sc_curmode);
  206 
  207         DPRINTF(sc, "%s: set xmit rate for %s to %dM\n",
  208             __func__, ether_sprintf(ni->ni_macaddr),
  209             ni->ni_rates.rs_nrates > 0 ?
  210                 (ni->ni_rates.rs_rates[rate] & IEEE80211_RATE_VAL) / 2 : 0);
  211 
  212         ni->ni_txrate = rate;
  213         /*
  214          * Before associating a node has no rate set setup
  215          * so we can't calculate any transmit codes to use.
  216          * This is ok since we should never be sending anything
  217          * but management frames and those always go at the
  218          * lowest hardware rate.
  219          */
  220         if (ni->ni_rates.rs_nrates > 0) {
  221                 amn->amn_tx_rix0 = sc->sc_rixmap[
  222                                                ni->ni_rates.rs_rates[rate] & IEEE80211_RATE_VAL];
  223                 amn->amn_tx_rate0 = rt->info[amn->amn_tx_rix0].rateCode;
  224                 amn->amn_tx_rate0sp = amn->amn_tx_rate0 |
  225                         rt->info[amn->amn_tx_rix0].shortPreamble;
  226                 if (sc->sc_mrretry) {
  227                         amn->amn_tx_try0 = 1;
  228                         amn->amn_tx_try1 = 1;
  229                         amn->amn_tx_try2 = 1;
  230                         amn->amn_tx_try3 = 1;
  231                         if (--rate >= 0) {
  232                                 rix = sc->sc_rixmap[
  233                                                     ni->ni_rates.rs_rates[rate]&IEEE80211_RATE_VAL];
  234                                 amn->amn_tx_rate1 = rt->info[rix].rateCode;
  235                                 amn->amn_tx_rate1sp = amn->amn_tx_rate1 |
  236                                         rt->info[rix].shortPreamble;
  237                         } else {
  238                                 amn->amn_tx_rate1 = amn->amn_tx_rate1sp = 0;
  239                         }
  240                         if (--rate >= 0) {
  241                                 rix = sc->sc_rixmap[
  242                                                     ni->ni_rates.rs_rates[rate]&IEEE80211_RATE_VAL];
  243                                 amn->amn_tx_rate2 = rt->info[rix].rateCode;
  244                                 amn->amn_tx_rate2sp = amn->amn_tx_rate2 |
  245                                         rt->info[rix].shortPreamble;
  246                         } else {
  247                                 amn->amn_tx_rate2 = amn->amn_tx_rate2sp = 0;
  248                         }
  249                         if (rate > 0) {
  250                                 /* NB: only do this if we didn't already do it above */
  251                                 amn->amn_tx_rate3 = rt->info[0].rateCode;
  252                                 amn->amn_tx_rate3sp =
  253                                         an->an_tx_rate3 | rt->info[0].shortPreamble;
  254                         } else {
  255                                 amn->amn_tx_rate3 = amn->amn_tx_rate3sp = 0;
  256                         }
  257                 } else {
  258                         amn->amn_tx_try0 = ATH_TXMAXTRY;
  259                         /* theorically, these statements are useless because
  260                          *  the code which uses them tests for an_tx_try0 == ATH_TXMAXTRY
  261                          */
  262                         amn->amn_tx_try1 = 0;
  263                         amn->amn_tx_try2 = 0;
  264                         amn->amn_tx_try3 = 0;
  265                         amn->amn_tx_rate1 = amn->amn_tx_rate1sp = 0;
  266                         amn->amn_tx_rate2 = amn->amn_tx_rate2sp = 0;
  267                         amn->amn_tx_rate3 = amn->amn_tx_rate3sp = 0;
  268                 }
  269         }
  270         node_reset (amn);
  271 }
  272 
  273 /*
  274  * Set the starting transmit rate for a node.
  275  */
  276 static void
  277 ath_rate_ctl_start(struct ath_softc *sc, struct ieee80211_node *ni)
  278 {
  279 #define RATE(_ix)       (ni->ni_rates.rs_rates[(_ix)] & IEEE80211_RATE_VAL)
  280         struct ieee80211com *ic = &sc->sc_ic;
  281         int srate;
  282 
  283         KASSERTMSG(ni->ni_rates.rs_nrates > 0, "no rates");
  284         if (ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE) {
  285                 /*
  286                  * No fixed rate is requested. For 11b start with
  287                  * the highest negotiated rate; otherwise, for 11g
  288                  * and 11a, we start "in the middle" at 24Mb or 36Mb.
  289                  */
  290                 srate = ni->ni_rates.rs_nrates - 1;
  291                 if (sc->sc_curmode != IEEE80211_MODE_11B) {
  292                         /*
  293                          * Scan the negotiated rate set to find the
  294                          * closest rate.
  295                          */
  296                         /* NB: the rate set is assumed sorted */
  297                         for (; srate >= 0 && RATE(srate) > 72; srate--)
  298                                 ;
  299                         KASSERTMSG(srate >= 0, "bogus rate set");
  300                 }
  301         } else {
  302                 /*
  303                  * A fixed rate is to be used; ic_fixed_rate is an
  304                  * index into the supported rate set.  Convert this
  305                  * to the index into the negotiated rate set for
  306                  * the node.  We know the rate is there because the
  307                  * rate set is checked when the station associates.
  308                  */
  309                 const struct ieee80211_rateset *rs =
  310                         &ic->ic_sup_rates[ic->ic_curmode];
  311                 int r = rs->rs_rates[ic->ic_fixed_rate] & IEEE80211_RATE_VAL;
  312                 /* NB: the rate set is assumed sorted */
  313                 srate = ni->ni_rates.rs_nrates - 1;
  314                 for (; srate >= 0 && RATE(srate) != r; srate--)
  315                         ;
  316                 KASSERTMSG(srate >= 0,
  317                         "fixed rate %d not in rate set", ic->ic_fixed_rate);
  318         }
  319         ath_rate_update(sc, ni, srate);
  320 #undef RATE
  321 }
  322 
  323 static void
  324 ath_rate_cb(void *arg, struct ieee80211_node *ni)
  325 {
  326         struct ath_softc *sc = arg;
  327 
  328         ath_rate_update(sc, ni, 0);
  329 }
  330 
  331 /*
  332  * Reset the rate control state for each 802.11 state transition.
  333  */
  334 void
  335 ath_rate_newstate(struct ath_softc *sc, enum ieee80211_state state)
  336 {
  337         struct amrr_softc *asc = (struct amrr_softc *) sc->sc_rc;
  338         struct ieee80211com *ic = &sc->sc_ic;
  339         struct ieee80211_node *ni;
  340 
  341         if (state == IEEE80211_S_INIT) {
  342                 callout_stop(&asc->timer);
  343                 return;
  344         }
  345         if (ic->ic_opmode == IEEE80211_M_STA) {
  346                 /*
  347                  * Reset local xmit state; this is really only
  348                  * meaningful when operating in station mode.
  349                  */
  350                 ni = ic->ic_bss;
  351                 if (state == IEEE80211_S_RUN) {
  352                         ath_rate_ctl_start(sc, ni);
  353                 } else {
  354                         ath_rate_update(sc, ni, 0);
  355                 }
  356         } else {
  357                 /*
  358                  * When operating as a station the node table holds
  359                  * the AP's that were discovered during scanning.
  360                  * For any other operating mode we want to reset the
  361                  * tx rate state of each node.
  362                  */
  363                 ieee80211_iterate_nodes(&ic->ic_sta, ath_rate_cb, sc);
  364                 ath_rate_update(sc, ic->ic_bss, 0);
  365         }
  366         if (ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE &&
  367             state == IEEE80211_S_RUN) {
  368                 int interval;
  369                 /*
  370                  * Start the background rate control thread if we
  371                  * are not configured to use a fixed xmit rate.
  372                  */
  373                 interval = ath_rateinterval;
  374                 if (ic->ic_opmode == IEEE80211_M_STA)
  375                         interval /= 2;
  376                 callout_reset(&asc->timer, (interval * hz) / 1000,
  377                         ath_ratectl, &sc->sc_if);
  378         }
  379 }
  380 
  381 /* 
  382  * Examine and potentially adjust the transmit rate.
  383  */
  384 static void
  385 ath_rate_ctl(void *arg, struct ieee80211_node *ni)
  386 {
  387         struct ath_softc *sc = arg;
  388         struct amrr_node *amn = ATH_NODE_AMRR(ATH_NODE (ni));
  389         int old_rate;
  390 
  391 #define is_success(amn) \
  392 (amn->amn_tx_try1_cnt  < (amn->amn_tx_try0_cnt/10))
  393 #define is_enough(amn) \
  394 (amn->amn_tx_try0_cnt > 10)
  395 #define is_failure(amn) \
  396 (amn->amn_tx_try1_cnt > (amn->amn_tx_try0_cnt/3))
  397 #define is_max_rate(ni) \
  398 ((ni->ni_txrate + 1) >= ni->ni_rates.rs_nrates)
  399 #define is_min_rate(ni) \
  400 (ni->ni_txrate == 0)
  401 
  402         old_rate = ni->ni_txrate;
  403   
  404         DPRINTF (sc, "cnt0: %d cnt1: %d cnt2: %d cnt3: %d -- threshold: %d\n",
  405                  amn->amn_tx_try0_cnt,
  406                  amn->amn_tx_try1_cnt,
  407                  amn->amn_tx_try2_cnt,
  408                  amn->amn_tx_try3_cnt,
  409                  amn->amn_success_threshold);
  410         if (is_success (amn) && is_enough (amn)) {
  411                 amn->amn_success++;
  412                 if (amn->amn_success == amn->amn_success_threshold &&
  413                     !is_max_rate (ni)) {
  414                         amn->amn_recovery = 1;
  415                         amn->amn_success = 0;
  416                         ni->ni_txrate++;
  417                         DPRINTF (sc, "increase rate to %d\n", ni->ni_txrate);
  418                 } else {
  419                         amn->amn_recovery = 0;
  420                 }
  421         } else if (is_failure (amn)) {
  422                 amn->amn_success = 0;
  423                 if (!is_min_rate (ni)) {
  424                         if (amn->amn_recovery) {
  425                                 /* recovery failure. */
  426                                 amn->amn_success_threshold *= 2;
  427                                 amn->amn_success_threshold = min (amn->amn_success_threshold,
  428                                                                   (u_int)ath_rate_max_success_threshold);
  429                                 DPRINTF (sc, "decrease rate recovery thr: %d\n", amn->amn_success_threshold);
  430                         } else {
  431                                 /* simple failure. */
  432                                 amn->amn_success_threshold = ath_rate_min_success_threshold;
  433                                 DPRINTF (sc, "decrease rate normal thr: %d\n", amn->amn_success_threshold);
  434                         }
  435                         amn->amn_recovery = 0;
  436                         ni->ni_txrate--;
  437                 } else {
  438                         amn->amn_recovery = 0;
  439                 }
  440 
  441         }
  442         if (is_enough (amn) || old_rate != ni->ni_txrate) {
  443                 /* reset counters. */
  444                 amn->amn_tx_try0_cnt = 0;
  445                 amn->amn_tx_try1_cnt = 0;
  446                 amn->amn_tx_try2_cnt = 0;
  447                 amn->amn_tx_try3_cnt = 0;
  448                 amn->amn_tx_failure_cnt = 0;
  449         }
  450         if (old_rate != ni->ni_txrate) {
  451                 ath_rate_update(sc, ni, ni->ni_txrate);
  452         }
  453 }
  454 
  455 static void
  456 ath_ratectl(void *arg)
  457 {
  458         struct ifnet *ifp = arg;
  459         struct ath_softc *sc = ifp->if_softc;
  460         struct amrr_softc *asc = (struct amrr_softc *) sc->sc_rc;
  461         struct ieee80211com *ic = &sc->sc_ic;
  462         int interval;
  463 
  464         if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
  465                 sc->sc_stats.ast_rate_calls++;
  466 
  467                 if (ic->ic_opmode == IEEE80211_M_STA)
  468                         ath_rate_ctl(sc, ic->ic_bss);   /* NB: no reference */
  469                 else
  470                         ieee80211_iterate_nodes(&ic->ic_sta, ath_rate_ctl, sc);
  471         }
  472         interval = ath_rateinterval;
  473         if (ic->ic_opmode == IEEE80211_M_STA)
  474                 interval /= 2;
  475         callout_reset(&asc->timer, (interval * hz) / 1000,
  476                 ath_ratectl, &sc->sc_if);
  477 }
  478 
  479 static void
  480 ath_rate_sysctlattach(struct ath_softc *sc)
  481 {
  482         struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev);
  483         struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev);
  484 
  485         SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
  486                 "rate_interval", CTLFLAG_RW, &ath_rateinterval, 0,
  487                 "rate control: operation interval (ms)");
  488         /* XXX bounds check values */
  489         SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
  490                 "max_sucess_threshold", CTLFLAG_RW,
  491                 &ath_rate_max_success_threshold, 0, "");
  492         SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
  493                 "min_sucess_threshold", CTLFLAG_RW,
  494                 &ath_rate_min_success_threshold, 0, "");
  495 }
  496 
  497 struct ath_ratectrl *
  498 ath_rate_attach(struct ath_softc *sc)
  499 {
  500         struct amrr_softc *asc;
  501 
  502         asc = malloc(sizeof(struct amrr_softc), M_DEVBUF, M_WAITOK|M_ZERO);
  503         asc->arc.arc_space = sizeof(struct amrr_node);
  504         callout_init(&asc->timer, debug_mpsafenet ? CALLOUT_MPSAFE : 0);
  505         ath_rate_sysctlattach(sc);
  506 
  507         return &asc->arc;
  508 }
  509 
  510 void
  511 ath_rate_detach(struct ath_ratectrl *arc)
  512 {
  513         struct amrr_softc *asc = (struct amrr_softc *) arc;
  514 
  515         callout_drain(&asc->timer);
  516         free(asc, M_DEVBUF);
  517 }

Cache object: 08336f9c82008788386afff290e478cf


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.