FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/bhareg.h

     /*      $NetBSD: bhareg.h,v 1.21 2017/02/26 23:30:14 jdolecek Exp $     */
     
     /*-
      * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
      * All rights reserved.
      *
      * This code is derived from software contributed to The NetBSD Foundation
      * by Charles M. Hannum and by Jason R. Thorpe of the Numerical Aerospace
      * Simulation Facility, NASA Ames Research Center.
     *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     * POSSIBILITY OF SUCH DAMAGE.
     */
    
    /*
     * Originally written by Julian Elischer (julian@tfs.com)
     * for TRW Financial Systems for use under the MACH(2.5) operating system.
     *
     * TRW Financial Systems, in accordance with their agreement with Carnegie
     * Mellon University, makes this software available to CMU to distribute
     * or use in any manner that they see fit as long as this message is kept with
     * the software. For this reason TFS also grants any other persons or
     * organisations permission to use or modify this software.
     *
     * TFS supplies this software to be publicly redistributed
     * on the understanding that TFS is not responsible for the correct
     * functioning of this software in any circumstances.
     */
    
    typedef u_int8_t physaddr[4];
    typedef u_int8_t physlen[4];
    #define ltophys _lto4l
    #define phystol _4ltol
    
    /*
     * I/O port offsets
     */
    #define BHA_CTRL_PORT           0       /* control (wo) */
    #define BHA_STAT_PORT           0       /* status (ro) */
    #define BHA_CMD_PORT            1       /* command (wo) */
    #define BHA_DATA_PORT           1       /* data (ro) */
    #define BHA_INTR_PORT           2       /* interrupt status (ro) */
    #define BHA_EXTGEOM_PORT        3       /* extended geometry (ro) */
    
    /*
     * BHA_CTRL bits
     */
    #define BHA_CTRL_HRST           0x80    /* Hardware reset */
    #define BHA_CTRL_SRST           0x40    /* Software reset */
    #define BHA_CTRL_IRST           0x20    /* Interrupt reset */
    #define BHA_CTRL_SCRST          0x10    /* SCSI bus reset */
    
    /*
     * BHA_STAT bits
     */
    #define BHA_STAT_STST           0x80    /* Self test in Progress */
    #define BHA_STAT_DIAGF          0x40    /* Diagnostic Failure */
    #define BHA_STAT_INIT           0x20    /* Mbx Init required */
    #define BHA_STAT_IDLE           0x10    /* Host Adapter Idle */
    #define BHA_STAT_CDF            0x08    /* cmd/data out port full */
    #define BHA_STAT_DF             0x04    /* Data in port full */
    #define BHA_STAT_INVDCMD        0x01    /* Invalid command */
    
    /*
     * BHA_CMD opcodes
     */
    #define BHA_NOP                 0x00    /* No operation */
    #define BHA_MBX_INIT            0x01    /* Mbx initialization */
    #define BHA_START_SCSI          0x02    /* start scsi command */
    #define BHA_EXECUTE_BIOS_CMD    0x03    /* execute BIOS command */
    #define BHA_INQUIRE_REVISION    0x04    /* Adapter Inquiry */
    #define BHA_MBO_INTR_EN         0x05    /* Enable MBO available interrupt */
    #define BHA_SEL_TIMEOUT_SET     0x06    /* set selection time-out */
    #define BHA_BUS_ON_TIME_SET     0x07    /* set bus-on time */
    #define BHA_BUS_OFF_TIME_SET    0x08    /* set bus-off time */
    #define BHA_BUS_SPEED_SET       0x09    /* set bus transfer speed */
    #define BHA_INQUIRE_DEVICES     0x0a    /* return installed devices 0-7 */
    #define BHA_INQUIRE_CONFIG      0x0b    /* return configuration data */
    #define BHA_TARGET_EN           0x0c    /* enable target mode */
    #define BHA_INQUIRE_SETUP       0x0d    /* return setup data */
    #define BHA_WRITE_LRAM          0x1a    /* write adapter local RAM */
   #define BHA_READ_LRAM           0x1b    /* read adapter local RAM */
   #define BHA_WRITE_CHIP_FIFO     0x1c    /* write bus master chip FIFO */
   #define BHA_READ_CHIP_FIFO      0x1d    /* read bus master chip FIFO */
   #define BHA_ECHO                0x1f    /* Echo command byte */
   #define BHA_ADAPTER_DIAGNOSTICS 0x20    /* host adapter diagnostics */
   #define BHA_SET_ADAPTER_OPTIONS 0x21    /* set adapter options */
   #define BHA_INQUIRE_DEVICES_2   0x23    /* return installed devices 8-15 */
   #define BHA_INQUIRE_TARG_DEVS   0x24    /* inquire target devices */
   #define BHA_DISABLE_HAC_INTR    0x25    /* disable host adapter interrupt */
   #define BHA_MBX_INIT_EXTENDED   0x81    /* Mbx initialization */
   #define BHA_EXECUTE_SCSI_CMD    0x83    /* execute SCSI command */
   #define BHA_INQUIRE_REVISION_3  0x84    /* Get 3rd firmware version byte */
   #define BHA_INQUIRE_REVISION_4  0x85    /* Get 4th firmware version byte */
   #define BHA_INQUIRE_PCI_INFO    0x86    /* get PCI host adapter information */
   #define BHA_INQUIRE_MODEL       0x8b    /* Get hardware ID and revision */
   #define BHA_INQUIRE_PERIOD      0x8c    /* Get synchronous period */
   #define BHA_INQUIRE_EXTENDED    0x8d    /* Adapter Setup Inquiry */
   #define BHA_ROUND_ROBIN         0x8f    /* Enable/Disable(default)
                                              round robin */
   #define BHA_STORE_LRAM          0x90    /* store host adapter local RAM */
   #define BHA_FETCH_LRAM          0x91    /* fetch host adapter local RAM */
   #define BHA_SAVE_TO_EEPROM      0x92    /* store local RAM data in EEPROM */
   #define BHA_UPLOAD_AUTOSCSI     0x94    /* upload AutoSCSI code */
   #define BHA_MODIFY_IOPORT       0x95    /* change or disable I/O port */
   #define BHA_SET_CCB_FORMAT      0x96    /* set CCB format (legacy/wide lun) */
   #define BHA_WRITE_INQUIRY_BUF   0x9a    /* write inquiry buffer */
   #define BHA_READ_INQUIRY_BUF    0x9b    /* read inquiry buffer */
   #define BHA_FLASH_UP_DOWNLOAD   0xa7    /* flash upload/downlod */
   #define BHA_READ_SCAM_DATA      0xa8    /* read SCAM data */
   #define BHA_WRITE_SCAM_DATA     0xa9    /* write SCAM data */
   
   /*
    * BHA_INTR bits
    */
   #define BHA_INTR_ANYINTR        0x80    /* Any interrupt */
   #define BHA_INTR_SCRD           0x08    /* SCSI reset detected */
   #define BHA_INTR_HACC           0x04    /* Command complete */
   #define BHA_INTR_MBOA           0x02    /* MBX out empty */
   #define BHA_INTR_MBIF           0x01    /* MBX in full */
   
   struct bha_mbx_out {
           physaddr ccb_addr;
           u_int8_t reserved[3];
           u_int8_t cmd;
   };
   
   struct bha_mbx_in {
           physaddr ccb_addr;
           u_int8_t host_stat;
           u_int8_t target_stat;
           u_int8_t reserved;
           u_int8_t comp_stat;
   };
   
   /*
    * mbo.cmd values
    */
   #define BHA_MBO_FREE    0x0     /* MBO entry is free */
   #define BHA_MBO_START   0x1     /* MBO activate entry */
   #define BHA_MBO_ABORT   0x2     /* MBO abort entry */
   
   /*
    * mbi.comp_stat values
    */
   #define BHA_MBI_FREE    0x0     /* MBI entry is free */
   #define BHA_MBI_OK      0x1     /* completed without error */
   #define BHA_MBI_ABORT   0x2     /* aborted ccb */
   #define BHA_MBI_UNKNOWN 0x3     /* Tried to abort invalid CCB */
   #define BHA_MBI_ERROR   0x4     /* Completed with error */
   #define BHA_MBI_BADCCB  0x5     /* invalid CCB */
   
   #if     defined(BIG_DMA)
   WARNING...THIS WON'T WORK(won't fit on 1 page)
   #if 0
   #define      BHA_NSEG 2048    /* Number of scatter gather segments - to much vm */
   #endif
   #define BHA_NSEG        128
   #else
   #define BHA_NSEG        33
   #endif /* BIG_DMA */
   
   struct bha_scat_gath {
           physlen  seg_len;
           physaddr seg_addr;
   };
   
   struct bha_ccb {
           u_int8_t        opcode;
   #if BYTE_ORDER == LITTLE_ENDIAN
           u_int8_t                                :3,
                           data_in                 :1,
                           data_out                :1,
                           wide_tag_enable         :1, /* Wide Lun CCB format */
                           wide_tag_type           :2; /* Wide Lun CCB format */
   #else
           u_int8_t        wide_tag_type           :2, /* Wide Lun CCB format */
                           wide_tag_enable         :1, /* Wide Lun CCB format */
                           data_out                :1,
                           data_in                 :1,
                                                   :3;
   #endif
           u_int8_t        scsi_cmd_length;
           u_int8_t        req_sense_length;
           /*------------------------------------longword boundary */
           physlen         data_length;
           /*------------------------------------longword boundary */
           physaddr        data_addr;
           /*------------------------------------longword boundary */
           u_int8_t        reserved1[2];
           u_int8_t        host_stat;
           u_int8_t        target_stat;
           /*------------------------------------longword boundary */
           u_int8_t        target;
   #if BYTE_ORDER == LITTLE_ENDIAN
           u_int8_t        lun                     :5,
                           tag_enable              :1,
                           tag_type                :2;
   #else
           u_int8_t        tag_type                :2,
                           tag_enable              :1,
                           lun                     :5;
   #endif
           u_int8_t        scsi_cmd[12];
           u_int8_t        reserved2[1];
           u_int8_t        link_id;
           /*------------------------------------longword boundary */
           physaddr        link_addr;
           /*------------------------------------longword boundary */
           physaddr        sense_ptr;
   /*-----end of HW fields-----------------------longword boundary */
           struct scsi_sense_data scsi_sense;
           /*------------------------------------longword boundary */
           struct bha_scat_gath scat_gath[BHA_NSEG];
           /*------------------------------------longword boundary */
           TAILQ_ENTRY(bha_ccb) chain;
           struct bha_ccb  *nexthash;
           bus_addr_t      hashkey;
   
           struct scsipi_xfer *xs;         /* the scsipi_xfer for this cmd */
   
           int flags;
   #define CCB_ALLOC       0x01
   #define CCB_ABORT       0x02
   #ifdef BHADIAG
   #define CCB_SENDING     0x04
   #endif
           int timeout;
   
           /*
            * This DMA map maps the buffer involved in the transfer.
            * Its contents are loaded into "scat_gath" above.
            */
           bus_dmamap_t    dmamap_xfer;
   };
   
   /*
    * opcode fields
    */
   #define BHA_INITIATOR_CCB       0x00    /* SCSI Initiator CCB */
   #define BHA_TARGET_CCB          0x01    /* SCSI Target CCB */
   #define BHA_INIT_SCAT_GATH_CCB  0x02    /* SCSI Initiator with S/G */
   #define BHA_INIT_RESID_CCB      0x03    /* SCSI Initiator w/ residual */
   #define BHA_INIT_RESID_SG_CCB   0x04    /* SCSI Initiator w/ residual and S/G */
   #define BHA_RESET_CCB           0x81    /* SCSI Bus reset */
   
   /*
    * bha_ccb.host_stat values
    */
   #define BHA_OK                  0x00    /* cmd ok */
   #define BHA_LINK_OK             0x0a    /* Link cmd ok */
   #define BHA_LINK_IT             0x0b    /* Link cmd ok + int */
   #define BHA_DATA_UNDRN          0x0c    /* data underrun error */
   #define BHA_SEL_TIMEOUT         0x11    /* Selection time out */
   #define BHA_OVER_UNDER          0x12    /* Data over/under run */
   #define BHA_BUS_FREE            0x13    /* Bus dropped at unexpected time */
   #define BHA_INV_BUS             0x14    /* Invalid bus phase/sequence */
   #define BHA_BAD_MBO             0x15    /* Incorrect MBO cmd */
   #define BHA_BAD_CCB             0x16    /* Incorrect ccb opcode */
   #define BHA_BAD_LINK            0x17    /* Not same values of LUN for links */
   #define BHA_INV_TARGET          0x18    /* Invalid target direction */
   #define BHA_CCB_DUP             0x19    /* Duplicate CCB received */
   #define BHA_INV_CCB             0x1a    /* Invalid CCB or segment list */
   #define BHA_AUTOSENSE_FAILED    0x1b    /* auto REQUEST SENSE failed */
   #define BHA_TAGGED_MSG_REJ      0x1c    /* tagged queueing message rejected */
   #define BHA_UNSUP_MSG_RECVD     0x1d    /* unsupported message received */
   #define BHA_HARDWARE_FAILURE    0x20    /* host adapter hardware failure */
   #define BHA_TARG_IGNORED_ATN    0x21    /* target ignored ATN signal */
   #define BHA_HA_SCSI_BUS_RESET   0x22    /* host adapter asserted RST */
   #define BHA_OTHER_SCSI_BUS_RESET 0x23   /* other device asserted RST */
   #define BHA_BAD_RECONNECT       0x24    /* target reconnected improperly */
   #define BHA_HA_BUS_DEVICE_RESET 0x25    /* host adapter performed BDR */
   #define BHA_ABORT_QUEUE         0x26    /* abort queue generated */
   #define BHA_SOFTWARE_FAILURE    0x27    /* host adapter software failure */
   #define BHA_HARDWARE_WATCHDOG   0x30    /* host adapter watchdog timer fired */
   #define BHA_SCSI_PARITY_ERROR   0x34    /* SCSI parity error detected */
   
   struct bha_extended_inquire {
           struct {
                   u_char  opcode;
                   u_char  len;
           } cmd;
           struct {
                   u_char  bus_type;       /* Type of bus connected to */
   #define BHA_BUS_TYPE_24BIT      'A'     /* ISA bus */
   #define BHA_BUS_TYPE_32BIT      'E'     /* EISA/VLB/PCI bus */
   #define BHA_BUS_TYPE_MCA        'M'     /* MicroChannel bus */
                   u_char  bios_address;   /* Address of adapter BIOS */
                   u_short sg_limit;
                   u_char  mbox_count;
                   u_char  mbox_baseaddr[4]; /* packed/unaligned u_int32_t */
                   u_char  intrflags;
   #define BHA_INTR_FASTEISA       0x04
   #define BHA_INTR_LEVEL          0x40    /* bit 6: level-sensitive interrupt */
                   u_char  firmware_level[3]; /* last 3 digits of firmware rev */
                   u_char  scsi_flags;     /* supported SCSI features */
   #define BHA_SCSI_WIDE           0x01    /* host adapter is wide */
   #define BHA_SCSI_DIFFERENTIAL   0x02    /* host adapter is differential */
   #define BHA_SCSI_SCAM           0x04    /* host adapter supports SCAM */
   #define BHA_SCSI_ULTRA          0x08    /* host adapter supports Ultra */
   #define BHA_SCSI_TERMINATION    0x10    /* host adapter supports smart
                                              termination */
           } reply;
   };
   
   struct bha_config {
           struct {
                   u_char  opcode;
           } cmd;
           struct {
                   u_char  chan;
                   u_char  intr;
   #if BYTE_ORDER == LITTLE_ENDIAN
                   u_char  scsi_dev :3,
                                    :5;
   #else
                   u_char           :5,
                           scsi_dev :3;
   #endif
           } reply;
   };
   
   struct bha_toggle {
           struct {
                   u_char  opcode;
                   u_char  enable;
           } cmd;
   };
   
   struct bha_mailbox {
           struct {
                   u_char  opcode;
                   u_char  nmbx;
                   physaddr addr;
           } cmd;
   };
   
   struct bha_model {
           struct {
                   u_char  opcode;
                   u_char  len;
           } cmd;
           struct {
                   u_char  id[4];          /* i.e bt742a -> '7','4','2','A' */
                   u_char  version[2];     /* i.e Board Revision 'H' -> 'H', 0x00 */
           } reply;
   };
   
   struct bha_revision {
           struct {
                   u_char  opcode;
           } cmd;
           struct {
                   u_char  board_type;
                   u_char  custom_feature;
                   char    firm_revision;
                   u_char  firm_version;
           } reply;
   };
   
   struct bha_digit {
           struct {
                   u_char  opcode;
           } cmd;
           struct {
                   u_char  digit;
           } reply;
   };
   
   struct bha_devices {
           struct {
                   u_char  opcode;
           } cmd;
           struct {
                   u_char  lun_map[8];
           } reply;
   };
   
   struct bha_sync {
   #if BYTE_ORDER == LITTLE_ENDIAN
           u_char  offset  :4,
                   period  :3,
                   valid   :1;
   #else
           u_char  valid   :1,
                   period  :3,
                   offset  :4;
   #endif
   };
   
   struct bha_setup_reply {
   #if BYTE_ORDER == LITTLE_ENDIAN
           u_int8_t        sync_neg        :1,
                           parity          :1,
                                           :6;
   #else
           u_int8_t                        :6,
                           parity          :1,
                           sync_neg        :1;
   #endif
           u_int8_t        speed;
           u_int8_t        bus_on;
           u_int8_t        bus_off;
           u_int8_t        num_mbx;
           u_int8_t        mbx[3];         /*XXX */
           /* doesn't make sense with 32bit addresses */
           struct bha_sync sync_low[8];
           u_int8_t        low_disc_info;
   };
   
   /* additional reply data supplied by wide controllers */
   struct bha_setup_reply_wide {
           u_int8_t        signature;
           u_int8_t        letter_d;
           u_int8_t        ha_type;
           u_int8_t        low_wide_allowed;
           u_int8_t        low_wide_active;
           struct bha_sync sync_high[8];
           u_int8_t        high_disc_info;
           u_int8_t        reserved;
           u_int8_t        high_wide_allowed;
           u_int8_t        high_wide_active;
   };
   
   struct bha_setup {
           struct {
                   u_char  opcode;
                   u_char  len;
           } cmd;
           struct bha_setup_reply reply;
           struct bha_setup_reply_wide reply_w;    /* for wide controllers */
   };
   
   struct bha_period_reply {
           u_char  period[8];
   };
   
   struct bha_period {
           struct {
                   u_char  opcode;
                   u_char  len;
           } cmd;
           struct bha_period_reply reply;
           struct bha_period_reply reply_w;        /* for wide controllers */
   };
   
   struct bha_isadisable {
           struct {
                   u_char  opcode;
                   u_char  modifier;
           } cmd;
   };
   
   /*
    * bha_isadisable.modifier parameters
    */
   #define BHA_IOMODIFY_330        0x00
   #define BHA_IOMODIFY_334        0x01
   #define BHA_IOMODIFY_DISABLE1   0x06
   #define BHA_IOMODIFY_DISABLE2   0x07
   
   #define INT9    0x01
   #define INT10   0x02
   #define INT11   0x04
   #define INT12   0x08
   #define INT14   0x20
   #define INT15   0x40
   
   #define EISADMA 0x00
   #define CHAN0   0x01
   #define CHAN5   0x20
   #define CHAN6   0x40
   #define CHAN7   0x80

Cache object: f8920cd06675a839b40a2a6d2e822765