FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/cd1400.h

     /*-
      * SPDX-License-Identifier: BSD-3-Clause
      *
      * cyclades cyclom-y serial driver
      *      Andrew Herbert <andrew@werple.apana.org.au>, 17 August 1993
      *
      * Copyright (c) 1993 Andrew Herbert.
      * All rights reserved.
      *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. The name Andrew Herbert may not be used to endorse or promote products
     *    derived from this software without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
     * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
     * NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
     * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
     * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
     * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
     * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
     * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
     * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     *
     * $FreeBSD$
     */
    
    /*
     * Definitions for Cirrus Logic CD1400 serial/parallel chips.
     */
    
    #define CD1400_NO_OF_CHANNELS   4       /* 4 serial channels per chip */
    #define CD1400_RX_FIFO_SIZE     12
    #define CD1400_TX_FIFO_SIZE     12
    
    /*
     * Global registers.
     */
    #define CD1400_GFRCR            0x40    /* global firmware revision code */
    #define CD1400_CAR              0x68    /* channel access */
    #define CD1400_CAR_CHAN                 (3<<0)  /* channel select */
    #define CD1400_GCR              0x4B    /* global configuration */
    #define CD1400_GCR_PARALLEL             (1<<7)  /* channel 0 is parallel */
    #define CD1400_SVRR             0x67    /* service request */
    #define CD1400_SVRR_MDMCH               (1<<2)
    #define CD1400_SVRR_TXRDY               (1<<1)
    #define CD1400_SVRR_RXRDY               (1<<0)
    #define CD1400_RICR             0x44    /* receive interrupting channel */
    #define CD1400_TICR             0x45    /* transmit interrupting channel */
    #define CD1400_MICR             0x46    /* modem interrupting channel */
    #define CD1400_RIR              0x6B    /* receive interrupt status */
    #define CD1400_RIR_RDIREQ               (1<<7)  /* rx service required */
    #define CD1400_RIR_RBUSY                (1<<6)  /* rx service in progress */
    #define CD1400_RIR_CHAN                 (3<<0)  /* channel select */
    #define CD1400_TIR              0x6A    /* transmit interrupt status */
    #define CD1400_TIR_RDIREQ               (1<<7)  /* tx service required */
    #define CD1400_TIR_RBUSY                (1<<6)  /* tx service in progress */
    #define CD1400_TIR_CHAN                 (3<<0)  /* channel select */
    #define CD1400_MIR              0x69    /* modem interrupt status */
    #define CD1400_MIR_RDIREQ               (1<<7)  /* modem service required */
    #define CD1400_MIR_RBUSY                (1<<6)  /* modem service in progress */
    #define CD1400_MIR_CHAN                 (3<<0)  /* channel select */
    #define CD1400_PPR              0x7E    /* prescaler period */
    #define CD1400_PPR_PRESCALER            512
    
    /*
     * Virtual registers.
     */
    #define CD1400_RIVR             0x43    /* receive interrupt vector */
    #define CD1400_RIVR_EXCEPTION           (1<<2)  /* receive exception bit */
    #define CD1400_TIVR             0x42    /* transmit interrupt vector */
    #define CD1400_MIVR             0x41    /* modem interrupt vector */
    #define CD1400_TDR              0x63    /* transmit data */
    #define CD1400_RDSR             0x62    /* receive data/status */
    #define CD1400_RDSR_TIMEOUT             (1<<7)  /* rx timeout */
    #define CD1400_RDSR_SPECIAL_SHIFT       4       /* rx special char shift */
    #define CD1400_RDSR_SPECIAL             (7<<4)  /* rx special char */
    #define CD1400_RDSR_BREAK               (1<<3)  /* rx break */
    #define CD1400_RDSR_PE                  (1<<2)  /* rx parity error */
    #define CD1400_RDSR_FE                  (1<<1)  /* rx framing error */
    #define CD1400_RDSR_OE                  (1<<0)  /* rx overrun error */
    #define CD1400_MISR             0x4C    /* modem interrupt status */
    #define CD1400_MISR_DSRd                (1<<7)  /* DSR delta */
    #define CD1400_MISR_CTSd                (1<<6)  /* CTS delta */
    #define CD1400_MISR_RId                 (1<<5)  /* RI delta */
    #define CD1400_MISR_CDd                 (1<<4)  /* CD delta */
    #define CD1400_EOSRR            0x60    /* end of service request */
    
    /*
     * Channel registers.
     */
    #define CD1400_LIVR             0x18    /* local interrupt vector */
   #define CD1400_CCR              0x05    /* channel control */
   #define CD1400_CCR_CMDRESET             (1<<7)  /* enables following: */
   #define CD1400_CCR_FTF                          (1<<1)  /* flush tx fifo */
   #define CD1400_CCR_FULLRESET                    (1<<0)  /* full reset */
   #define CD1400_CCR_CHANRESET                    0       /*  current channel */
   #define CD1400_CCR_CMDCORCHG            (1<<6)  /* enables following: */
   #define CD1400_CCR_COR3                         (1<<3)  /* COR3 changed */
   #define CD1400_CCR_COR2                         (1<<2)  /* COR2 changed */
   #define CD1400_CCR_COR1                         (1<<1)  /* COR1 changed */
   #define CD1400_CCR_CMDSENDSC            (1<<5)  /* enables following: */
   #define CD1400_CCR_SC                           (7<<0)  /* special char 1-4 */
   #define CD1400_CCR_CMDCHANCTL           (1<<4)  /* enables following: */
   #define CD1400_CCR_XMTEN                        (1<<3)  /* tx enable */
   #define CD1400_CCR_XMTDIS                       (1<<2)  /* tx disable */
   #define CD1400_CCR_RCVEN                        (1<<1)  /* rx enable */
   #define CD1400_CCR_RCVDIS                       (1<<0)  /* rx disable */
   #define CD1400_SRER             0x06    /* service request enable */
   #define CD1400_SRER_MDMCH               (1<<7)  /* modem change */
   #define CD1400_SRER_RXDATA              (1<<4)  /* rx data */
   #define CD1400_SRER_TXRDY               (1<<2)  /* tx fifo empty */
   #define CD1400_SRER_TXMPTY              (1<<1)  /* tx shift reg empty */
   #define CD1400_SRER_NNDT                (1<<0)  /* no new data */
   #define CD1400_COR1             0x08    /* channel option 1 */
   #define CD1400_COR1_PARODD              (1<<7)
   #define CD1400_COR1_PARNORMAL           (2<<5)
   #define CD1400_COR1_PARFORCE            (1<<5)  /* odd/even = force 1/0 */
   #define CD1400_COR1_PARNONE             (0<<5)
   #define CD1400_COR1_NOINPCK             (1<<4)
   #define CD1400_COR1_STOP2               (2<<2)
   #define CD1400_COR1_STOP15              (1<<2)  /* 1.5 stop bits */
   #define CD1400_COR1_STOP1               (0<<2)
   #define CD1400_COR1_CS8                 (3<<0)
   #define CD1400_COR1_CS7                 (2<<0)
   #define CD1400_COR1_CS6                 (1<<0)
   #define CD1400_COR1_CS5                 (0<<0)
   #define CD1400_COR2             0x09    /* channel option 2 */
   #define CD1400_COR2_IXANY               (1<<7)  /* implied XON mode */
   #define CD1400_COR2_IXOFF               (1<<6)  /* in-band tx flow control */
   #define CD1400_COR2_ETC                 (1<<5)  /* embedded tx command */
   #define CD1400_ETC_CMD                          0x00    /* start an ETC */
   #define CD1400_ETC_SENDBREAK                    0x81
   #define CD1400_ETC_INSERTDELAY                  0x82
   #define CD1400_ETC_STOPBREAK                    0x83
   #define CD1400_COR2_LLM                 (1<<4)  /* local loopback mode */
   #define CD1400_COR2_RLM                 (1<<3)  /* remote loopback mode */
   #define CD1400_COR2_RTSAO               (1<<2)  /* RTS auto output */
   #define CD1400_COR2_CCTS_OFLOW          (1<<1)  /* CTS auto enable */
   #define CD1400_COR2_CDSR_OFLOW          (1<<0)  /* DSR auto enable */
   #define CD1400_COR3             0x0A    /* channel option 3 */
   #define CD1400_COR3_SCDRNG              (1<<7)  /* special char detect range */
   #define CD1400_COR3_SCD34               (1<<6)  /* special char detect 3-4 */
   #define CD1400_COR3_FTC                 (1<<5)  /* flow control transparency */
   #define CD1400_COR3_SCD12               (1<<4)  /* special char detect 1-2 */
   #define CD1400_COR3_RXTH                (15<<0) /* rx fifo threshold */
   #define CD1400_COR4             0x1E    /* channel option 4 */
   #define CD1400_COR4_IGNCR               (1<<7)
   #define CD1400_COR4_ICRNL               (1<<6)
   #define CD1400_COR4_INLCR               (1<<5)
   #define CD1400_COR4_IGNBRK              (1<<4)
   #define CD1400_COR4_NOBRKINT            (1<<3)
   #define CD1400_COR4_PFO_ESC             (4<<0)  /* parity/framing/overrun... */
   #define CD1400_COR4_PFO_NUL             (3<<0)
   #define CD1400_COR4_PFO_DISCARD         (2<<0)
   #define CD1400_COR4_PFO_GOOD            (1<<0)
   #define CD1400_COR4_PFO_EXCEPTION       (0<<0)
   #define CD1400_COR5             0x1F    /* channel option 5 */
   #define CD1400_COR5_ISTRIP              (1<<7)
   #define CD1400_COR5_LNEXT               (1<<6)
   #define CD1400_COR5_CMOE                (1<<5)  /* char matching on error */
   #define CD1400_COR5_EBD                 (1<<2)  /* end of break detected */
   #define CD1400_COR5_ONLCR               (1<<1)
   #define CD1400_COR5_OCRNL               (1<<0)
   #define CD1400_CCSR             0x0B    /* channel control status */
   #define CD1400_RDCR             0x0E    /* received data count */
   #define CD1400_SCHR1            0x1A    /* special character 1 */
   #define CD1400_SCHR2            0x1B    /* special character 2 */
   #define CD1400_SCHR3            0x1C    /* special character 3 */
   #define CD1400_SCHR4            0x1D    /* special character 4 */
   #define CD1400_SCRL             0x22    /* special character range, low */
   #define CD1400_SCRH             0x23    /* special character range, high */
   #define CD1400_LNC              0x24    /* lnext character */
   #define CD1400_MCOR1            0x15    /* modem change option 1 */
   #define CD1400_MCOR1_DSRzd              (1<<7)  /* DSR one-to-zero delta */
   #define CD1400_MCOR1_CTSzd              (1<<6)
   #define CD1400_MCOR1_RIzd               (1<<5)
   #define CD1400_MCOR1_CDzd               (1<<4)
   #define CD1400_MCOR1_DTRth              (15<<0) /* dtrflow threshold */
   #define CD1400_MCOR2            0x16    /* modem change option 2 */
   #define CD1400_MCOR2_DSRod              (1<<7)  /* DSR zero-to-one delta */
   #define CD1400_MCOR2_CTSod              (1<<6)
   #define CD1400_MCOR2_RIod               (1<<5)
   #define CD1400_MCOR2_CDod               (1<<4)
   #define CD1400_RTPR             0x21    /* receive timeout period */
   #define CD1400_MSVR1            0x6C    /* modem signal value 1 */
   #define CD1400_MSVR1_RTS                (1<<0)  /* RTS line (r/w) */
   #define CD1400_MSVR2            0x6D    /* modem signal value 2 */
   #define CD1400_MSVR2_DSR                (1<<7)  /* !DSR line (r) */
   #define CD1400_MSVR2_CTS                (1<<6)  /* !CTS line (r) */
   #define CD1400_MSVR2_RI                 (1<<5)  /* !RI line (r) */
   #define CD1400_MSVR2_CD                 (1<<4)  /* !CD line (r) */
   #define CD1400_MSVR2_DTR                (1<<1)  /* DTR line (r/w) */
   #define CD1400_PSVR             0x6F    /* printer signal value */
   #define CD1400_RBPR             0x78    /* receive baud rate period */
   #define CD1400_RCOR             0x7C    /* receive clock option */
   #define CD1400_TBPR             0x72    /* transmit baud rate period */
   #define CD1400_TCOR             0x76    /* transmit clock option */

Cache object: 5a5acd60655fa7985f583c533459ed27