FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/cd1400reg.h
1 /* $OpenBSD: cd1400reg.h,v 1.4 1998/05/20 19:29:23 deraadt Exp $ */
2 /* $NetBSD: cd1400reg.h,v 1.3 1996/09/24 18:02:33 christos Exp $ */
3
4 /*-
5 * cyclades cyclom-y serial driver
6 * Andrew Herbert <andrew@werple.apana.org.au>, 17 August 1993
7 *
8 * Copyright (c) 1993 Andrew Herbert.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. The name Andrew Herbert may not be used to endorse or promote products
20 * derived from this software without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
25 * NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
26 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
27 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
28 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
29 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
30 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
31 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 */
33
34 /*
35 * Definitions for Cirrus Logic CD1400 serial/parallel chips.
36 */
37
38 #define CD1400_NO_OF_CHANNELS 4 /* 4 serial channels per chip */
39 #define CD1400_RX_FIFO_SIZE 12
40 #define CD1400_TX_FIFO_SIZE 12
41 #define CD1400_PAR_FIFO_SIZE 30
42
43 /*
44 * Global registers.
45 */
46 #define CD1400_GFRCR 0x40 /* global firmware revision code */
47 #define CD1400_CAR 0x68 /* channel access */
48 #define CD1400_CAR_CHAN (3<<0) /* channel select */
49 #define CD1400_GCR 0x4B /* global configuration */
50 #define CD1400_GCR_PARALLEL (1<<7) /* channel 0 is parallel */
51 #define CD1400_SVRR 0x67 /* service request */
52 #define CD1400_SVRR_MDMCH (1<<2)
53 #define CD1400_SVRR_TXRDY (1<<1)
54 #define CD1400_SVRR_RXRDY (1<<0)
55 #define CD1400_RICR 0x44 /* receive interrupting channel */
56 #define CD1400_TICR 0x45 /* transmit interrupting channel */
57 #define CD1400_MICR 0x46 /* modem interrupting channel */
58 #define CD1400_RIR 0x6B /* receive interrupt status */
59 #define CD1400_RIR_RDIREQ (1<<7) /* rx service required */
60 #define CD1400_RIR_RBUSY (1<<6) /* rx service in progress */
61 #define CD1400_RIR_CHAN (3<<0) /* channel select */
62 #define CD1400_TIR 0x6A /* transmit interrupt status */
63 #define CD1400_TIR_RDIREQ (1<<7) /* tx service required */
64 #define CD1400_TIR_RBUSY (1<<6) /* tx service in progress */
65 #define CD1400_TIR_CHAN (3<<0) /* channel select */
66 #define CD1400_MIR 0x69 /* modem interrupt status */
67 #define CD1400_MIR_RDIREQ (1<<7) /* modem service required */
68 #define CD1400_MIR_RBUSY (1<<6) /* modem service in progress */
69 #define CD1400_MIR_CHAN (3<<0) /* channel select */
70 #define CD1400_PPR 0x7E /* prescaler period */
71 #define CD1400_PPR_PRESCALER 512
72
73 /*
74 * Virtual registers.
75 */
76 #define CD1400_RIVR 0x43 /* receive interrupt vector */
77 #define CD1400_RIVR_EXCEPTION (1<<2) /* receive exception bit */
78 #define CD1400_TIVR 0x42 /* transmit interrupt vector */
79 #define CD1400_MIVR 0x41 /* modem interrupt vector */
80 #define CD1400_TDR 0x63 /* transmit data */
81 #define CD1400_RDSR 0x62 /* receive data/status */
82 #define CD1400_RDSR_TIMEOUT (1<<7) /* rx timeout */
83 #define CD1400_RDSR_SPECIAL_SHIFT 4 /* rx special char shift */
84 #define CD1400_RDSR_SPECIAL (7<<4) /* rx special char */
85 #define CD1400_RDSR_BREAK (1<<3) /* rx break */
86 #define CD1400_RDSR_PE (1<<2) /* rx parity error */
87 #define CD1400_RDSR_FE (1<<1) /* rx framing error */
88 #define CD1400_RDSR_OE (1<<0) /* rx overrun error */
89 #define CD1400_MISR 0x4C /* modem interrupt status */
90 #define CD1400_MISR_DSRd (1<<7) /* DSR delta */
91 #define CD1400_MISR_CTSd (1<<6) /* CTS delta */
92 #define CD1400_MISR_RId (1<<5) /* RI delta */
93 #define CD1400_MISR_CDd (1<<4) /* CD delta */
94 #define CD1400_EOSRR 0x60 /* end of service request */
95
96 /*
97 * Channel registers.
98 */
99 #define CD1400_LIVR 0x18 /* local interrupt vector */
100 #define CD1400_CCR 0x05 /* channel control */
101 #define CD1400_CCR_CMDRESET (1<<7) /* enables following: */
102 #define CD1400_CCR_FTF (1<<1) /* flush tx fifo */
103 #define CD1400_CCR_FULLRESET (1<<0) /* full reset */
104 #define CD1400_CCR_CMDCORCHG (1<<6) /* enables following: */
105 #define CD1400_CCR_COR3 (1<<3) /* COR3 changed */
106 #define CD1400_CCR_COR2 (1<<2) /* COR2 changed */
107 #define CD1400_CCR_COR1 (1<<1) /* COR1 changed */
108 #define CD1400_CCR_CMDSENDSC (1<<5) /* enables following: */
109 #define CD1400_CCR_SC (7<<0) /* special char 1-4 */
110 #define CD1400_CCR_CMDCHANCTL (1<<4) /* enables following: */
111 #define CD1400_CCR_XMTEN (1<<3) /* tx enable */
112 #define CD1400_CCR_XMTDIS (1<<2) /* tx disable */
113 #define CD1400_CCR_RCVEN (1<<1) /* rx enable */
114 #define CD1400_CCR_RCVDIS (1<<0) /* rx disable */
115 #define CD1400_SRER 0x06 /* service request enable */
116 #define CD1400_SRER_MDMCH (1<<7) /* modem change */
117 #define CD1400_SRER_RXDATA (1<<4) /* rx data */
118 #define CD1400_SRER_TXRDY (1<<2) /* tx fifo empty */
119 #define CD1400_SRER_TXMPTY (1<<1) /* tx shift reg empty */
120 #define CD1400_SRER_NNDT (1<<0) /* no new data */
121 #define CD1400_COR1 0x08 /* channel option 1 */
122 #define CD1400_COR1_PARODD (1<<7)
123 #define CD1400_COR1_PARNORMAL (2<<5)
124 #define CD1400_COR1_PARFORCE (1<<5) /* odd/even = force 1/0 */
125 #define CD1400_COR1_PARNONE (0<<5)
126 #define CD1400_COR1_NOINPCK (1<<4)
127 #define CD1400_COR1_STOP2 (2<<2)
128 #define CD1400_COR1_STOP15 (1<<2) /* 1.5 stop bits */
129 #define CD1400_COR1_STOP1 (0<<2)
130 #define CD1400_COR1_CS8 (3<<0)
131 #define CD1400_COR1_CS7 (2<<0)
132 #define CD1400_COR1_CS6 (1<<0)
133 #define CD1400_COR1_CS5 (0<<0)
134 #define CD1400_COR2 0x09 /* channel option 2 */
135 #define CD1400_COR2_IXANY (1<<7) /* implied XON mode */
136 #define CD1400_COR2_IXOFF (1<<6) /* in-band tx flow control */
137 #define CD1400_COR2_ETC (1<<5) /* embedded tx command */
138 #define CD1400_COR2_LLM (1<<4) /* local loopback mode */
139 #define CD1400_COR2_RLM (1<<3) /* remote loopback mode */
140 #define CD1400_COR2_RTSAO (1<<2) /* RTS auto output */
141 #define CD1400_COR2_CCTS_OFLOW (1<<1) /* CTS auto enable */
142 #define CD1400_COR2_CDSR_OFLOW (1<<0) /* DSR auto enable */
143 #define CD1400_COR3 0x0A /* channel option 3 */
144 #define CD1400_COR3_SCDRNG (1<<7) /* special char detect range */
145 #define CD1400_COR3_SCD34 (1<<6) /* special char detect 3-4 */
146 #define CD1400_COR3_FTC (1<<5) /* flow control transparency */
147 #define CD1400_COR3_SCD12 (1<<4) /* special char detect 1-2 */
148 #define CD1400_COR3_RXTH (15<<0) /* rx fifo threshold */
149 #define CD1400_COR4 0x1E /* channel option 4 */
150 #define CD1400_COR4_IGNCR (1<<7)
151 #define CD1400_COR4_ICRNL (1<<6)
152 #define CD1400_COR4_INLCR (1<<5)
153 #define CD1400_COR4_IGNBRK (1<<4)
154 #define CD1400_COR4_NOBRKINT (1<<3)
155 #define CD1400_COR4_PFO_ESC (4<<0) /* parity/framing/overrun... */
156 #define CD1400_COR4_PFO_NUL (3<<0)
157 #define CD1400_COR4_PFO_DISCARD (2<<0)
158 #define CD1400_COR4_PFO_GOOD (1<<0)
159 #define CD1400_COR4_PFO_EXCEPTION (0<<0)
160 #define CD1400_COR5 0x1F /* channel option 5 */
161 #define CD1400_COR5_ISTRIP (1<<7)
162 #define CD1400_COR5_LNEXT (1<<6)
163 #define CD1400_COR5_CMOE (1<<5) /* char matching on error */
164 #define CD1400_COR5_EBD (1<<2) /* end of break detected */
165 #define CD1400_COR5_ONLCR (1<<1)
166 #define CD1400_COR5_OCRNL (1<<0)
167 #define CD1400_CCSR 0x0B /* channel control status */
168 #define CD1400_RDCR 0x0E /* received data count */
169 #define CD1400_SCHR1 0x1A /* special character 1 */
170 #define CD1400_SCHR2 0x1B /* special character 2 */
171 #define CD1400_SCHR3 0x1C /* special character 3 */
172 #define CD1400_SCHR4 0x1D /* special character 4 */
173 #define CD1400_SCRL 0x22 /* special character range, low */
174 #define CD1400_SCRH 0x23 /* special character range, high */
175 #define CD1400_LNC 0x24 /* lnext character */
176 #define CD1400_MCOR1 0x15 /* modem change option 1 */
177 #define CD1400_MCOR1_DSRzd (1<<7) /* DSR one-to-zero delta */
178 #define CD1400_MCOR1_CTSzd (1<<6)
179 #define CD1400_MCOR1_RIzd (1<<5)
180 #define CD1400_MCOR1_CDzd (1<<4)
181 #define CD1400_MCOR1_DTRth (15<<0) /* dtrflow threshold */
182 #define CD1400_MCOR2 0x16 /* modem change option 2 */
183 #define CD1400_MCOR2_DSRod (1<<7) /* DSR zero-to-one delta */
184 #define CD1400_MCOR2_CTSod (1<<6)
185 #define CD1400_MCOR2_RIod (1<<5)
186 #define CD1400_MCOR2_CDod (1<<4)
187 #define CD1400_RTPR 0x21 /* receive timeout period */
188 #define CD1400_MSVR1 0x6C /* modem signal value 1 */
189 #define CD1400_MSVR1_RTS (1<<0) /* RTS line (r/w) */
190 #define CD1400_MSVR2 0x6D /* modem signal value 2 */
191 #define CD1400_MSVR2_DSR (1<<7) /* !DSR line (r) */
192 #define CD1400_MSVR2_CTS (1<<6) /* !CTS line (r) */
193 #define CD1400_MSVR2_RI (1<<5) /* !RI line (r) */
194 #define CD1400_MSVR2_CD (1<<4) /* !CD line (r) */
195 #define CD1400_MSVR2_DTR (1<<1) /* DTR line (r/w) */
196 #define CD1400_PSVR 0x6F /* printer signal value */
197 #define CD1400_RBPR 0x78 /* receive baud rate period */
198 #define CD1400_RCOR 0x7C /* receive clock option */
199 #define CD1400_TBPR 0x72 /* transmit baud rate period */
200 #define CD1400_TCOR 0x76 /* transmit clock option */
Cache object: 7c0d295027443e27b962495fb27b6946
|