FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/dm9000.c
1 /* $NetBSD: dm9000.c,v 1.35 2022/09/25 18:43:32 thorpej Exp $ */
2
3 /*
4 * Copyright (c) 2009 Paul Fleischer
5 * All rights reserved.
6 *
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
12 * 3. The name of the company nor the name of the author may be used to
13 * endorse or promote products derived from this software without specific
14 * prior written permission.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
18 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19 * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
20 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
21 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
22 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * SUCH DAMAGE.
27 */
28
29 /* based on sys/dev/ic/cs89x0.c */
30 /*
31 * Copyright (c) 2004 Christopher Gilbert
32 * All rights reserved.
33 *
34 * 1. Redistributions of source code must retain the above copyright
35 * notice, this list of conditions and the following disclaimer.
36 * 2. Redistributions in binary form must reproduce the above copyright
37 * notice, this list of conditions and the following disclaimer in the
38 * documentation and/or other materials provided with the distribution.
39 * 3. The name of the company nor the name of the author may be used to
40 * endorse or promote products derived from this software without specific
41 * prior written permission.
42 *
43 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
44 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
45 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
46 * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
47 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
48 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
49 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
50 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
51 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
52 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
53 * SUCH DAMAGE.
54 */
55
56 /*
57 * Copyright 1997
58 * Digital Equipment Corporation. All rights reserved.
59 *
60 * This software is furnished under license and may be used and
61 * copied only in accordance with the following terms and conditions.
62 * Subject to these conditions, you may download, copy, install,
63 * use, modify and distribute this software in source and/or binary
64 * form. No title or ownership is transferred hereby.
65 *
66 * 1) Any source code used, modified or distributed must reproduce
67 * and retain this copyright notice and list of conditions as
68 * they appear in the source file.
69 *
70 * 2) No right is granted to use any trade name, trademark, or logo of
71 * Digital Equipment Corporation. Neither the "Digital Equipment
72 * Corporation" name nor any trademark or logo of Digital Equipment
73 * Corporation may be used to endorse or promote products derived
74 * from this software without the prior written permission of
75 * Digital Equipment Corporation.
76 *
77 * 3) This software is provided "AS-IS" and any express or implied
78 * warranties, including but not limited to, any implied warranties
79 * of merchantability, fitness for a particular purpose, or
80 * non-infringement are disclaimed. In no event shall DIGITAL be
81 * liable for any damages whatsoever, and in particular, DIGITAL
82 * shall not be liable for special, indirect, consequential, or
83 * incidental damages or damages for lost profits, loss of
84 * revenue or loss of use, whether such damages arise in contract,
85 * negligence, tort, under statute, in equity, at law or otherwise,
86 * even if advised of the possibility of such damage.
87 */
88
89 #include <sys/cdefs.h>
90
91 #include <sys/param.h>
92 #include <sys/bus.h>
93 #include <sys/intr.h>
94 #include <sys/device.h>
95 #include <sys/mbuf.h>
96 #include <sys/sockio.h>
97 #include <sys/errno.h>
98 #include <sys/cprng.h>
99 #include <sys/rndsource.h>
100 #include <sys/kernel.h>
101 #include <sys/systm.h>
102
103 #include <net/if.h>
104 #include <net/if_dl.h>
105 #include <net/if_ether.h>
106 #include <net/if_media.h>
107 #include <dev/mii/mii.h>
108 #include <dev/mii/miivar.h>
109 #include <net/bpf.h>
110
111 #include <dev/ic/dm9000var.h>
112 #include <dev/ic/dm9000reg.h>
113
114 #if 1
115 #undef DM9000_DEBUG
116 #undef DM9000_TX_DEBUG
117 #undef DM9000_TX_DATA_DEBUG
118 #undef DM9000_RX_DEBUG
119 #undef DM9000_RX_DATA_DEBUG
120 #else
121 #define DM9000_DEBUG
122 #define DM9000_TX_DEBUG
123 #define DM9000_TX_DATA_DEBUG
124 #define DM9000_RX_DEBUG
125 #define DM9000_RX_DATA_DEBUG
126 #endif
127
128 #ifdef DM9000_DEBUG
129 #define DPRINTF(s) do {printf s; } while (/*CONSTCOND*/0)
130 #else
131 #define DPRINTF(s) do {} while (/*CONSTCOND*/0)
132 #endif
133
134 #ifdef DM9000_TX_DEBUG
135 #define TX_DPRINTF(s) do {printf s; } while (/*CONSTCOND*/0)
136 #else
137 #define TX_DPRINTF(s) do {} while (/*CONSTCOND*/0)
138 #endif
139
140 #ifdef DM9000_RX_DEBUG
141 #define RX_DPRINTF(s) do {printf s; } while (/*CONSTCOND*/0)
142 #else
143 #define RX_DPRINTF(s) do {} while (/*CONSTCOND*/0)
144 #endif
145
146 #ifdef DM9000_RX_DATA_DEBUG
147 #define RX_DATA_DPRINTF(s) do {printf s; } while (/*CONSTCOND*/0)
148 #else
149 #define RX_DATA_DPRINTF(s) do {} while (/*CONSTCOND*/0)
150 #endif
151
152 #ifdef DM9000_TX_DATA_DEBUG
153 #define TX_DATA_DPRINTF(s) do {printf s; } while (/*CONSTCOND*/0)
154 #else
155 #define TX_DATA_DPRINTF(s) do {} while (/*CONSTCOND*/0)
156 #endif
157
158 static void dme_reset(struct dme_softc *);
159 static int dme_init(struct ifnet *);
160 static void dme_stop(struct ifnet *, int);
161 static void dme_start(struct ifnet *);
162 static int dme_ioctl(struct ifnet *, u_long, void *);
163
164 static void dme_set_rcvfilt(struct dme_softc *);
165 static void mii_statchg(struct ifnet *);
166 static void lnkchg(struct dme_softc *);
167 static void phy_tick(void *);
168 static int mii_readreg(device_t, int, int, uint16_t *);
169 static int mii_writereg(device_t, int, int, uint16_t);
170
171 static void dme_prepare(struct ifnet *);
172 static void dme_transmit(struct ifnet *);
173 static void dme_receive(struct ifnet *);
174
175 static int pkt_read_2(struct dme_softc *, struct mbuf **);
176 static int pkt_write_2(struct dme_softc *, struct mbuf *);
177 static int pkt_read_1(struct dme_softc *, struct mbuf **);
178 static int pkt_write_1(struct dme_softc *, struct mbuf *);
179 #define PKT_READ(ii,m) (*(ii)->sc_pkt_read)((ii),(m))
180 #define PKT_WRITE(ii,m) (*(ii)->sc_pkt_write)((ii),(m))
181
182 #define ETHER_IS_ONE(x) \
183 (((x)[0] & (x)[1] & (x)[2] & (x)[3] & (x)[4] & (x)[5]) == 255)
184 #define ETHER_IS_ZERO(x) \
185 (((x)[0] | (x)[1] | (x)[2] | (x)[3] | (x)[4] | (x)[5]) == 0)
186
187 int
188 dme_attach(struct dme_softc *sc, const uint8_t *notusedanymore)
189 {
190 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
191 struct mii_data *mii = &sc->sc_mii;
192 struct ifmedia *ifm = &mii->mii_media;
193 uint8_t b[2];
194 uint16_t io_mode;
195 uint8_t enaddr[ETHER_ADDR_LEN];
196 prop_dictionary_t dict;
197 prop_data_t ea;
198
199 dme_read_c(sc, DM9000_VID0, b, 2);
200 sc->sc_vendor_id = le16toh((uint16_t)b[1] << 8 | b[0]);
201 dme_read_c(sc, DM9000_PID0, b, 2);
202 sc->sc_product_id = le16toh((uint16_t)b[1] << 8 | b[0]);
203
204 /* TODO: Check the vendor ID as well */
205 if (sc->sc_product_id != 0x9000) {
206 panic("dme_attach: product id mismatch (0x%hx != 0x9000)",
207 sc->sc_product_id);
208 }
209 #if 1 || DM9000_DEBUG
210 {
211 dme_read_c(sc, DM9000_PAB0, enaddr, 6);
212 aprint_normal_dev(sc->sc_dev,
213 "DM9000 was configured with MAC address: %s\n",
214 ether_sprintf(enaddr));
215 }
216 #endif
217 dict = device_properties(sc->sc_dev);
218 ea = (dict) ? prop_dictionary_get(dict, "mac-address") : NULL;
219 if (ea != NULL) {
220 /*
221 * If the MAC address is overridden by a device property,
222 * use that.
223 */
224 KASSERT(prop_object_type(ea) == PROP_TYPE_DATA);
225 KASSERT(prop_data_size(ea) == ETHER_ADDR_LEN);
226 memcpy(enaddr, prop_data_value(ea), ETHER_ADDR_LEN);
227 aprint_debug_dev(sc->sc_dev, "got MAC address!\n");
228 } else {
229 /*
230 * If we did not get an externaly configure address,
231 * try to read one from the current setup, before
232 * resetting the chip.
233 */
234 dme_read_c(sc, DM9000_PAB0, enaddr, 6);
235 if (ETHER_IS_ONE(enaddr) || ETHER_IS_ZERO(enaddr)) {
236 /* make a random MAC address */
237 uint32_t maclo = 0x00f2 | (cprng_strong32() << 16);
238 uint32_t machi = cprng_strong32();
239 enaddr[0] = maclo;
240 enaddr[1] = maclo >> 8;
241 enaddr[2] = maclo >> 16;
242 enaddr[3] = maclo >> 26;
243 enaddr[4] = machi;
244 enaddr[5] = machi >> 8;
245 }
246 }
247 /* TODO: perform explicit EEPROM read op if it's availble */
248
249 dme_reset(sc);
250
251 mii->mii_ifp = ifp;
252 mii->mii_readreg = mii_readreg;
253 mii->mii_writereg = mii_writereg;
254 mii->mii_statchg = mii_statchg;
255
256 /* assume davicom PHY at 1. ext PHY could be hooked but only at 0-3 */
257 sc->sc_ethercom.ec_mii = mii;
258 ifmedia_init(ifm, 0, ether_mediachange, ether_mediastatus);
259 mii_attach(sc->sc_dev, mii, 0xffffffff, 1 /* PHY 1 */,
260 MII_OFFSET_ANY, 0);
261 if (LIST_FIRST(&mii->mii_phys) == NULL) {
262 ifmedia_add(ifm, IFM_ETHER | IFM_NONE, 0, NULL);
263 ifmedia_set(ifm, IFM_ETHER | IFM_NONE);
264 } else
265 ifmedia_set(ifm, IFM_ETHER | IFM_AUTO);
266 ifm->ifm_media = ifm->ifm_cur->ifm_media;
267
268 strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ);
269 ifp->if_softc = sc;
270 ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST;
271 ifp->if_init = dme_init;
272 ifp->if_start = dme_start;
273 ifp->if_stop = dme_stop;
274 ifp->if_ioctl = dme_ioctl;
275 ifp->if_watchdog = NULL; /* no watchdog used */
276 IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN);
277 IFQ_SET_READY(&ifp->if_snd);
278
279 if_attach(ifp);
280 ether_ifattach(ifp, enaddr);
281 if_deferred_start_init(ifp, NULL);
282
283 rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev),
284 RND_TYPE_NET, RND_FLAG_DEFAULT);
285
286 /* might be unnecessary as link change interrupt works well */
287 callout_init(&sc->sc_link_callout, 0);
288 callout_setfunc(&sc->sc_link_callout, phy_tick, sc);
289
290 io_mode = (dme_read(sc, DM9000_ISR) &
291 DM9000_IOMODE_MASK) >> DM9000_IOMODE_SHIFT;
292
293 /* frame body read/write ops in 2 byte quantity or byte-wise. */
294 DPRINTF(("DM9000 Operation Mode: "));
295 switch (io_mode) {
296 case DM9000_MODE_8BIT:
297 DPRINTF(("8-bit mode"));
298 sc->sc_data_width = 1;
299 sc->sc_pkt_write = pkt_write_1;
300 sc->sc_pkt_read = pkt_read_1;
301 break;
302 case DM9000_MODE_16BIT:
303 DPRINTF(("16-bit mode"));
304 sc->sc_data_width = 2;
305 sc->sc_pkt_write = pkt_write_2;
306 sc->sc_pkt_read = pkt_read_2;
307 break;
308 case DM9000_MODE_32BIT:
309 DPRINTF(("32-bit mode"));
310 sc->sc_data_width = 4;
311 panic("32bit mode is unsupported\n");
312 break;
313 default:
314 DPRINTF(("Invalid mode"));
315 break;
316 }
317 DPRINTF(("\n"));
318
319 return 0;
320 }
321
322 int
323 dme_detach(struct dme_softc *sc)
324 {
325 return 0;
326 }
327
328 /* Software Initialize/Reset of the DM9000 */
329 static void
330 dme_reset(struct dme_softc *sc)
331 {
332 uint8_t misc;
333
334 /* We only re-initialized the PHY in this function the first time it is
335 * called. */
336 if (!sc->sc_phy_initialized) {
337 /* PHY Reset */
338 mii_writereg(sc->sc_dev, 1, MII_BMCR, BMCR_RESET);
339
340 /* PHY Power Down */
341 misc = dme_read(sc, DM9000_GPR);
342 dme_write(sc, DM9000_GPR, misc | DM9000_GPR_PHY_PWROFF);
343 }
344
345 /* Reset the DM9000 twice, as described in section 2 of the Programming
346 * Guide.
347 * The PHY is initialized and enabled between those two resets.
348 */
349
350 /* Software Reset */
351 dme_write(sc, DM9000_NCR,
352 DM9000_NCR_RST | DM9000_NCR_LBK_MAC_INTERNAL);
353 delay(20);
354 dme_write(sc, DM9000_NCR, 0x0);
355
356 if (!sc->sc_phy_initialized) {
357 /* PHY Enable */
358 misc = dme_read(sc, DM9000_GPR);
359 dme_write(sc, DM9000_GPR, misc & ~DM9000_GPR_PHY_PWROFF);
360 misc = dme_read(sc, DM9000_GPCR);
361 dme_write(sc, DM9000_GPCR, misc | DM9000_GPCR_GPIO0_OUT);
362
363 dme_write(sc, DM9000_NCR,
364 DM9000_NCR_RST | DM9000_NCR_LBK_MAC_INTERNAL);
365 delay(20);
366 dme_write(sc, DM9000_NCR, 0x0);
367 }
368
369 /* Select internal PHY, no wakeup event, no collosion mode,
370 * normal loopback mode.
371 */
372 dme_write(sc, DM9000_NCR, DM9000_NCR_LBK_NORMAL);
373
374 /* Will clear TX1END, TX2END, and WAKEST fields by reading DM9000_NSR*/
375 dme_read(sc, DM9000_NSR);
376
377 /* Enable wraparound of read/write pointer, frame received latch,
378 * and frame transmitted latch.
379 */
380 dme_write(sc, DM9000_IMR,
381 DM9000_IMR_PAR | DM9000_IMR_PRM | DM9000_IMR_PTM);
382
383 dme_write(sc, DM9000_RCR,
384 DM9000_RCR_DIS_CRC | DM9000_RCR_DIS_LONG | DM9000_RCR_WTDIS);
385
386 sc->sc_phy_initialized = 1;
387 }
388
389 static int
390 dme_init(struct ifnet *ifp)
391 {
392 struct dme_softc *sc = ifp->if_softc;
393
394 dme_stop(ifp, 0);
395 dme_reset(sc);
396 dme_write_c(sc, DM9000_PAB0, CLLADDR(ifp->if_sadl), ETHER_ADDR_LEN);
397 dme_set_rcvfilt(sc);
398 (void)ether_mediachange(ifp);
399
400 sc->txbusy = sc->txready = 0;
401
402 ifp->if_flags |= IFF_RUNNING;
403 callout_schedule(&sc->sc_link_callout, hz);
404
405 return 0;
406 }
407
408 /* Configure multicast filter */
409 static void
410 dme_set_rcvfilt(struct dme_softc *sc)
411 {
412 struct ethercom *ec = &sc->sc_ethercom;
413 struct ifnet *ifp = &ec->ec_if;
414 struct ether_multi *enm;
415 struct ether_multistep step;
416 uint8_t mchash[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; /* 64bit mchash */
417 uint32_t h = 0;
418 int rcr;
419
420 rcr = dme_read(sc, DM9000_RCR);
421 rcr &= ~(DM9000_RCR_PRMSC | DM9000_RCR_ALL);
422 dme_write(sc, DM9000_RCR, rcr &~ DM9000_RCR_RXEN);
423
424 ETHER_LOCK(ec);
425 if (ifp->if_flags & IFF_PROMISC) {
426 ec->ec_flags |= ETHER_F_ALLMULTI;
427 ETHER_UNLOCK(ec);
428 /* run promisc. mode */
429 rcr |= DM9000_RCR_PRMSC;
430 goto update;
431 }
432 ec->ec_flags &= ~ETHER_F_ALLMULTI;
433 ETHER_FIRST_MULTI(step, ec, enm);
434 while (enm != NULL) {
435 if (memcpy(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
436 /*
437 * We must listen to a range of multicast addresses.
438 * For now, just accept all multicasts, rather than
439 * trying to set only those filter bits needed to match
440 * the range. (At this time, the only use of address
441 * ranges is for IP multicast routing, for which the
442 * range is big enough to require all bits set.)
443 */
444 ec->ec_flags |= ETHER_F_ALLMULTI;
445 ETHER_UNLOCK(ec);
446 memset(mchash, 0xff, sizeof(mchash)); /* necessary? */
447 /* accept all mulicast frame */
448 rcr |= DM9000_RCR_ALL;
449 break;
450 }
451 h = ether_crc32_le(enm->enm_addrlo, ETHER_ADDR_LEN) & 0x3f;
452 /* 3(5:3) and 3(2:0) sampling to have uint8_t[8] */
453 mchash[h / 8] |= 1 << (h % 8);
454 ETHER_NEXT_MULTI(step, enm);
455 }
456 ETHER_UNLOCK(ec);
457 /* DM9000 receive filter is always on */
458 mchash[7] |= 0x80; /* to catch bcast frame */
459 update:
460 dme_write_c(sc, DM9000_MAB0, mchash, sizeof(mchash));
461 dme_write(sc, DM9000_RCR, rcr | DM9000_RCR_RXEN);
462 return;
463 }
464
465 void
466 lnkchg(struct dme_softc *sc)
467 {
468 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
469 struct ifmediareq ifmr;
470
471 ether_mediastatus(ifp, &ifmr);
472 }
473
474 static void
475 mii_statchg(struct ifnet *ifp)
476 {
477 struct dme_softc *sc = ifp->if_softc;
478 struct mii_data *mii = &sc->sc_mii;
479 uint8_t fcr, ncr;
480
481 #if 0
482 const uint8_t Mbps[2] = { 10, 100 };
483 uint8_t nsr = dme_read(sc, DM9000_NSR);
484 int spd = Mbps[!!(nsr & DM9000_NSR_SPEED)];
485 /* speed/duplexity available also in reg 0x11 of internal PHY */
486 if (nsr & DM9000_NSR_LINKST)
487 printf("link up,spd%d", spd);
488 else
489 printf("link down");
490
491 /* show resolved mii(4) parameters */
492 printf("MII spd%d",
493 (int)(sc->sc_ethercom.ec_if.if_baudrate / IF_Mbps(1)));
494 if (mii->mii_media_active & IFM_FDX)
495 printf(",full-duplex");
496 printf("\n");
497 #endif
498
499 /* Adjust duplexity and PAUSE flow control. */
500 fcr = dme_read(sc, DM9000_FCR) &~ DM9000_FCR_FLCE;
501 ncr = dme_read(sc, DM9000_NCR) &~ DM9000_NCR_FDX;
502 if ((mii->mii_media_active & IFM_FDX)
503 && (mii->mii_media_active & IFM_FLOW)) {
504 fcr |= DM9000_FCR_FLCE;
505 ncr |= DM9000_NCR_FDX;
506 }
507 dme_write(sc, DM9000_FCR, fcr);
508 dme_write(sc, DM9000_NCR, ncr);
509 }
510
511 static void
512 phy_tick(void *arg)
513 {
514 struct dme_softc *sc = arg;
515 struct mii_data *mii = &sc->sc_mii;
516 int s;
517
518 s = splnet();
519 mii_tick(mii);
520 splx(s);
521
522 callout_schedule(&sc->sc_link_callout, hz);
523 }
524
525 static int
526 mii_readreg(device_t self, int phy, int reg, uint16_t *val)
527 {
528 struct dme_softc *sc = device_private(self);
529
530 if (phy != 1)
531 return EINVAL;
532
533 /* Select Register to read*/
534 dme_write(sc, DM9000_EPAR, DM9000_EPAR_INT_PHY +
535 (reg & DM9000_EPAR_EROA_MASK));
536 /* Select read operation (DM9000_EPCR_ERPRR) from the PHY */
537 dme_write(sc, DM9000_EPCR, DM9000_EPCR_ERPRR + DM9000_EPCR_EPOS_PHY);
538
539 /* Wait until access to PHY has completed */
540 while (dme_read(sc, DM9000_EPCR) & DM9000_EPCR_ERRE)
541 ;
542
543 /* Reset ERPRR-bit */
544 dme_write(sc, DM9000_EPCR, DM9000_EPCR_EPOS_PHY);
545
546 *val = dme_read(sc, DM9000_EPDRL) | (dme_read(sc, DM9000_EPDRH) << 8);
547 return 0;
548 }
549
550 static int
551 mii_writereg(device_t self, int phy, int reg, uint16_t val)
552 {
553 struct dme_softc *sc = device_private(self);
554
555 if (phy != 1)
556 return EINVAL;
557
558 /* Select Register to write */
559 dme_write(sc, DM9000_EPAR, DM9000_EPAR_INT_PHY +
560 (reg & DM9000_EPAR_EROA_MASK));
561
562 /* Write data to the two data registers */
563 dme_write(sc, DM9000_EPDRL, val & 0xFF);
564 dme_write(sc, DM9000_EPDRH, (val >> 8) & 0xFF);
565
566 /* Select write operation (DM9000_EPCR_ERPRW) from the PHY */
567 dme_write(sc, DM9000_EPCR, DM9000_EPCR_ERPRW + DM9000_EPCR_EPOS_PHY);
568
569 /* Wait until access to PHY has completed */
570 while (dme_read(sc, DM9000_EPCR) & DM9000_EPCR_ERRE)
571 ;
572
573 /* Reset ERPRR-bit */
574 dme_write(sc, DM9000_EPCR, DM9000_EPCR_EPOS_PHY);
575
576 return 0;
577 }
578
579 void
580 dme_stop(struct ifnet *ifp, int disable)
581 {
582 struct dme_softc *sc = ifp->if_softc;
583
584 /* Not quite sure what to do when called with disable == 0 */
585 if (disable) {
586 /* Disable RX */
587 dme_write(sc, DM9000_RCR, 0x0);
588 }
589 mii_down(&sc->sc_mii);
590 callout_stop(&sc->sc_link_callout);
591
592 ifp->if_flags &= ~IFF_RUNNING;
593 ifp->if_timer = 0;
594 }
595
596 static void
597 dme_start(struct ifnet *ifp)
598 {
599 struct dme_softc *sc = ifp->if_softc;
600
601 if ((ifp->if_flags & IFF_RUNNING) == 0) {
602 return;
603 }
604 if (!sc->txready) {
605 dme_prepare(ifp);
606 }
607 if (sc->txbusy) {
608 /*
609 * We need to wait until the current frame has
610 * been transmitted.
611 */
612 return;
613 }
614 if (sc->txready) {
615 /* We are ready to transmit right away */
616 dme_transmit(ifp);
617 }
618 dme_prepare(ifp); /* Prepare next one */
619 }
620
621 /* Prepare data to be transmitted (i.e. dequeue and load it into the DM9000) */
622 static void
623 dme_prepare(struct ifnet *ifp)
624 {
625 struct dme_softc *sc = ifp->if_softc;
626 uint16_t length;
627 struct mbuf *m;
628
629 KASSERT(!sc->txready);
630
631 IFQ_DEQUEUE(&ifp->if_snd, m);
632 if (m == NULL) {
633 TX_DPRINTF(("dme_prepare: Nothing to transmit\n"));
634 return; /* Nothing to transmit */
635 }
636
637 /* Element has now been removed from the queue, so we better send it */
638
639 bpf_mtap(ifp, m, BPF_D_OUT);
640
641 /* Setup the DM9000 to accept the writes, and then write each buf in
642 the chain. */
643
644 TX_DATA_DPRINTF(("dme_prepare: Writing data: "));
645 bus_space_write_1(sc->sc_iot, sc->sc_ioh, sc->dme_io, DM9000_MWCMD);
646 length = PKT_WRITE(sc, m);
647 bpf_mtap(ifp, m, BPF_D_OUT);
648 TX_DATA_DPRINTF(("\n"));
649
650 if (length % sc->sc_data_width != 0)
651 panic("dme_prepare: length is not compatible with IO_MODE");
652
653 sc->txready_length = length;
654 sc->txready = 1;
655 m_freem(m);
656 }
657
658 /* Transmit prepared data */
659 static void
660 dme_transmit(struct ifnet *ifp)
661 {
662 struct dme_softc *sc = ifp->if_softc;
663
664 TX_DPRINTF(("dme_transmit: PRE: txready: %d, txbusy: %d\n",
665 sc->txready, sc->txbusy));
666
667 /* prime frame length first */
668 dme_write(sc, DM9000_TXPLL, sc->txready_length & 0xff);
669 dme_write(sc, DM9000_TXPLH, (sc->txready_length >> 8) & 0xff);
670 /* read isr next */
671 dme_read(sc, DM9000_ISR);
672 /* finally issue a request to send */
673 dme_write(sc, DM9000_TCR, DM9000_TCR_TXREQ);
674 sc->txready = 0;
675 sc->txbusy = 1;
676 sc->txready_length = 0;
677 }
678
679 /* Receive data */
680 static void
681 dme_receive(struct ifnet *ifp)
682 {
683 struct dme_softc *sc = ifp->if_softc;
684 struct mbuf *m;
685 uint8_t avail, rsr;
686
687 DPRINTF(("inside dme_receive\n"));
688
689 /* frame has just arrived, retrieve it */
690 /* called right after Rx frame available interrupt */
691 do {
692 /* "no increment" read to get the avail byte without
693 moving past it. */
694 bus_space_write_1(sc->sc_iot, sc->sc_ioh, sc->dme_io,
695 DM9000_MRCMDX);
696 /* Read twice */
697 avail = bus_space_read_1(sc->sc_iot, sc->sc_ioh, sc->dme_data);
698 avail = bus_space_read_1(sc->sc_iot, sc->sc_ioh, sc->dme_data);
699 avail &= 03; /* 1:0 we only want these bits */
700 if (avail == 01) {
701 /* Read with address increment. */
702 bus_space_write_1(sc->sc_iot, sc->sc_ioh, sc->dme_io,
703 DM9000_MRCMD);
704 rsr = PKT_READ(sc, &m);
705 if (m == NULL) {
706 /* failed to allocate a receive buffer */
707 RX_DPRINTF(("dme_receive: "
708 "Error allocating buffer\n"));
709 if_statinc(ifp, if_ierrors);
710 continue;
711 }
712 if (rsr & (DM9000_RSR_CE | DM9000_RSR_PLE)) {
713 /* Error while receiving the frame,
714 * discard it and keep track of counters
715 */
716 RX_DPRINTF(("dme_receive: "
717 "Error reciving frame\n"));
718 if_statinc(ifp, if_ierrors);
719 continue;
720 }
721 if (rsr & DM9000_RSR_LCS) {
722 if_statinc(ifp, if_collisions);
723 continue;
724 }
725 /* pick and forward this frame to ifq */
726 if_percpuq_enqueue(ifp->if_percpuq, m);
727 } else if (avail != 00) {
728 /* Should this be logged somehow? */
729 printf("%s: Resetting chip\n",
730 device_xname(sc->sc_dev));
731 dme_reset(sc);
732 break;
733 }
734 } while (avail == 01);
735 /* frame received successfully */
736 }
737
738 int
739 dme_intr(void *arg)
740 {
741 struct dme_softc *sc = arg;
742 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
743 uint8_t isr, nsr, tsr;
744
745 DPRINTF(("dme_intr: Begin\n"));
746
747 /* Disable interrupts */
748 dme_write(sc, DM9000_IMR, DM9000_IMR_PAR);
749
750 isr = dme_read(sc, DM9000_ISR);
751 dme_write(sc, DM9000_ISR, isr); /* write to clear */
752
753 if (isr & DM9000_ISR_PRS) {
754 KASSERT(ifp->if_flags & IFF_RUNNING);
755 dme_receive(ifp);
756 }
757 if (isr & DM9000_ISR_LNKCHNG)
758 lnkchg(sc);
759 if (isr & DM9000_ISR_PTS) {
760 tsr = 0x01; /* Initialize to an error value */
761
762 /* A frame has been transmitted */
763 sc->txbusy = 0;
764
765 nsr = dme_read(sc, DM9000_NSR);
766 if (nsr & DM9000_NSR_TX1END) {
767 tsr = dme_read(sc, DM9000_TSR1);
768 TX_DPRINTF(("dme_intr: Sent using channel 0\n"));
769 } else if (nsr & DM9000_NSR_TX2END) {
770 tsr = dme_read(sc, DM9000_TSR2);
771 TX_DPRINTF(("dme_intr: Sent using channel 1\n"));
772 }
773
774 if (tsr == 0x0) {
775 /* Frame successfully sent */
776 if_statinc(ifp, if_opackets);
777 } else {
778 if_statinc(ifp, if_oerrors);
779 }
780
781 /* If we have nothing ready to transmit, prepare something */
782 if (!sc->txready)
783 dme_prepare(ifp);
784
785 if (sc->txready)
786 dme_transmit(ifp);
787
788 /* Prepare the next frame */
789 dme_prepare(ifp);
790
791 if_schedule_deferred_start(ifp);
792 }
793
794 /* Enable interrupts again */
795 dme_write(sc, DM9000_IMR,
796 DM9000_IMR_PAR | DM9000_IMR_PRM | DM9000_IMR_PTM);
797
798 DPRINTF(("dme_intr: End\n"));
799
800 return (isr != 0);
801 }
802
803 static int
804 dme_ioctl(struct ifnet *ifp, u_long cmd, void *data)
805 {
806 struct dme_softc *sc = ifp->if_softc;
807 struct ifreq *ifr = (struct ifreq *)data;
808 struct ifmedia *ifm = &sc->sc_mii.mii_media;
809 int s, error;
810
811 s = splnet();
812 switch (cmd) {
813 case SIOCSIFMEDIA:
814 /* Flow control requires full-duplex mode. */
815 if (IFM_SUBTYPE(ifr->ifr_media) == IFM_AUTO ||
816 (ifr->ifr_media & IFM_FDX) == 0)
817 ifr->ifr_media &= ~IFM_ETH_FMASK;
818 if (IFM_SUBTYPE(ifr->ifr_media) != IFM_AUTO) {
819 if ((ifr->ifr_media & IFM_ETH_FMASK) == IFM_FLOW) {
820 ifr->ifr_media |=
821 IFM_ETH_TXPAUSE | IFM_ETH_RXPAUSE;
822 }
823 }
824 error = ifmedia_ioctl(ifp, ifr, ifm, cmd);
825 break;
826 default:
827 if ((error = ether_ioctl(ifp, cmd, data)) != ENETRESET)
828 break;
829 error = 0;
830 if (cmd == SIOCSIFCAP)
831 error = if_init(ifp);
832 else if (cmd != SIOCADDMULTI && cmd != SIOCDELMULTI)
833 ;
834 else if (ifp->if_flags && IFF_RUNNING) {
835 /* Address list has changed, reconfigure filter */
836 dme_set_rcvfilt(sc);
837 }
838 break;
839 }
840 splx(s);
841 return error;
842 }
843
844 static struct mbuf *
845 dme_alloc_receive_buffer(struct ifnet *ifp, unsigned int frame_length)
846 {
847 struct dme_softc *sc = ifp->if_softc;
848 struct mbuf *m;
849 int pad, quantum;
850
851 quantum = sc->sc_data_width;
852 MGETHDR(m, M_DONTWAIT, MT_DATA);
853 if (m == NULL)
854 return NULL;
855
856 m_set_rcvif(m, ifp);
857 /* Ensure that we always allocate an even number of
858 * bytes in order to avoid writing beyond the buffer
859 */
860 m->m_pkthdr.len = frame_length + (frame_length % quantum);
861 pad = ALIGN(sizeof(struct ether_header)) -
862 sizeof(struct ether_header);
863 /* All our frames have the CRC attached */
864 m->m_flags |= M_HASFCS;
865 if (m->m_pkthdr.len + pad > MHLEN) {
866 MCLGET(m, M_DONTWAIT);
867 if ((m->m_flags & M_EXT) == 0) {
868 m_freem(m);
869 return NULL;
870 }
871 }
872
873 m->m_data += pad;
874 m->m_len = frame_length + (frame_length % quantum);
875
876 return m;
877 }
878
879 static int
880 pkt_write_2(struct dme_softc *sc, struct mbuf *bufChain)
881 {
882 int left_over_count = 0; /* Number of bytes from previous mbuf, which
883 need to be written with the next.*/
884 uint16_t left_over_buf = 0;
885 int length = 0;
886 struct mbuf *buf;
887 uint8_t *write_ptr;
888
889 /* We expect that the DM9000 has been setup to accept writes before
890 this function is called. */
891
892 for (buf = bufChain; buf != NULL; buf = buf->m_next) {
893 int to_write = buf->m_len;
894
895 length += to_write;
896
897 write_ptr = buf->m_data;
898 while (to_write > 0 ||
899 (buf->m_next == NULL && left_over_count > 0)) {
900 if (left_over_count > 0) {
901 uint8_t b = 0;
902 DPRINTF(("pkt_write_16: "
903 "Writing left over byte\n"));
904
905 if (to_write > 0) {
906 b = *write_ptr;
907 to_write--;
908 write_ptr++;
909
910 DPRINTF(("Took single byte\n"));
911 } else {
912 DPRINTF(("Leftover in last run\n"));
913 length++;
914 }
915
916 /* Does shift direction depend on endianness? */
917 left_over_buf = left_over_buf | (b << 8);
918
919 bus_space_write_2(sc->sc_iot, sc->sc_ioh,
920 sc->dme_data, left_over_buf);
921 TX_DATA_DPRINTF(("%02X ", left_over_buf));
922 left_over_count = 0;
923 } else if ((long)write_ptr % 2 != 0) {
924 /* Misaligned data */
925 DPRINTF(("pkt_write_16: "
926 "Detected misaligned data\n"));
927 left_over_buf = *write_ptr;
928 left_over_count = 1;
929 write_ptr++;
930 to_write--;
931 } else {
932 int i;
933 uint16_t *dptr = (uint16_t *)write_ptr;
934
935 /* A block of aligned data. */
936 for (i = 0; i < to_write / 2; i++) {
937 /* buf will be half-word aligned
938 * all the time
939 */
940 bus_space_write_2(sc->sc_iot,
941 sc->sc_ioh, sc->dme_data, *dptr);
942 TX_DATA_DPRINTF(("%02X %02X ",
943 *dptr & 0xFF, (*dptr >> 8) & 0xFF));
944 dptr++;
945 }
946
947 write_ptr += i * 2;
948 if (to_write % 2 != 0) {
949 DPRINTF(("pkt_write_16: "
950 "to_write %% 2: %d\n",
951 to_write % 2));
952 left_over_count = 1;
953 /* XXX: Does this depend on
954 * the endianness?
955 */
956 left_over_buf = *write_ptr;
957
958 write_ptr++;
959 to_write--;
960 DPRINTF(("pkt_write_16: "
961 "to_write (after): %d\n",
962 to_write));
963 DPRINTF(("pkt_write_16: i * 2: %d\n",
964 i*2));
965 }
966 to_write -= i * 2;
967 }
968 } /* while (...) */
969 } /* for (...) */
970
971 return length;
972 }
973
974 static int
975 pkt_read_2(struct dme_softc *sc, struct mbuf **outBuf)
976 {
977 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
978 uint8_t rx_status;
979 struct mbuf *m;
980 uint16_t data;
981 uint16_t frame_length;
982 uint16_t i;
983 uint16_t *buf;
984
985 data = bus_space_read_2(sc->sc_iot, sc->sc_ioh, sc->dme_data);
986 rx_status = data & 0xFF;
987
988 frame_length = bus_space_read_2(sc->sc_iot,
989 sc->sc_ioh, sc->dme_data);
990 if (frame_length > ETHER_MAX_LEN) {
991 printf("Got frame of length: %d\n", frame_length);
992 printf("ETHER_MAX_LEN is: %d\n", ETHER_MAX_LEN);
993 panic("Something is rotten");
994 }
995 RX_DPRINTF(("dme_receive: rx_statux: 0x%x, frame_length: %d\n",
996 rx_status, frame_length));
997
998 m = dme_alloc_receive_buffer(ifp, frame_length);
999 if (m == NULL) {
1000 /*
1001 * didn't get a receive buffer, so we read the rest of the
1002 * frame, throw it away and return an error
1003 */
1004 for (i = 0; i < frame_length; i += 2) {
1005 data = bus_space_read_2(sc->sc_iot,
1006 sc->sc_ioh, sc->dme_data);
1007 }
1008 *outBuf = NULL;
1009 return 0;
1010 }
1011
1012 buf = mtod(m, uint16_t*);
1013
1014 RX_DPRINTF(("dme_receive: "));
1015
1016 for (i = 0; i < frame_length; i += 2) {
1017 data = bus_space_read_2(sc->sc_iot,
1018 sc->sc_ioh, sc->dme_data);
1019 if ( (frame_length % 2 != 0) &&
1020 (i == frame_length - 1) ) {
1021 data = data & 0xff;
1022 RX_DPRINTF((" L "));
1023 }
1024 *buf = data;
1025 buf++;
1026 RX_DATA_DPRINTF(("%02X %02X ", data & 0xff,
1027 (data >> 8) & 0xff));
1028 }
1029
1030 RX_DATA_DPRINTF(("\n"));
1031 RX_DPRINTF(("Read %d bytes\n", i));
1032
1033 *outBuf = m;
1034 return rx_status;
1035 }
1036
1037 static int
1038 pkt_write_1(struct dme_softc *sc, struct mbuf *bufChain)
1039 {
1040 int length = 0, i;
1041 struct mbuf *buf;
1042 uint8_t *write_ptr;
1043
1044 /*
1045 * We expect that the DM9000 has been setup to accept writes before
1046 * this function is called.
1047 */
1048
1049 for (buf = bufChain; buf != NULL; buf = buf->m_next) {
1050 int to_write = buf->m_len;
1051
1052 length += to_write;
1053
1054 write_ptr = buf->m_data;
1055 for (i = 0; i < to_write; i++) {
1056 bus_space_write_1(sc->sc_iot, sc->sc_ioh,
1057 sc->dme_data, *write_ptr);
1058 write_ptr++;
1059 }
1060 } /* for (...) */
1061
1062 return length;
1063 }
1064
1065 static int
1066 pkt_read_1(struct dme_softc *sc, struct mbuf **outBuf)
1067 {
1068 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1069 uint8_t rx_status;
1070 struct mbuf *m;
1071 uint8_t *buf;
1072 uint16_t frame_length;
1073 uint16_t i, reg;
1074 uint8_t data;
1075
1076 reg = bus_space_read_1(sc->sc_iot, sc->sc_ioh, sc->dme_data);
1077 reg |= bus_space_read_1(sc->sc_iot, sc->sc_ioh, sc->dme_data) << 8;
1078 rx_status = reg & 0xFF;
1079
1080 reg = bus_space_read_1(sc->sc_iot, sc->sc_ioh, sc->dme_data);
1081 reg |= bus_space_read_1(sc->sc_iot, sc->sc_ioh, sc->dme_data) << 8;
1082 frame_length = reg;
1083
1084 if (frame_length > ETHER_MAX_LEN) {
1085 printf("Got frame of length: %d\n", frame_length);
1086 printf("ETHER_MAX_LEN is: %d\n", ETHER_MAX_LEN);
1087 panic("Something is rotten");
1088 }
1089 RX_DPRINTF(("dme_receive: "
1090 "rx_statux: 0x%x, frame_length: %d\n",
1091 rx_status, frame_length));
1092
1093 m = dme_alloc_receive_buffer(ifp, frame_length);
1094 if (m == NULL) {
1095 /*
1096 * didn't get a receive buffer, so we read the rest of the
1097 * frame, throw it away and return an error
1098 */
1099 for (i = 0; i < frame_length; i++ ) {
1100 data = bus_space_read_2(sc->sc_iot,
1101 sc->sc_ioh, sc->dme_data);
1102 }
1103 *outBuf = NULL;
1104 return 0;
1105 }
1106
1107 buf = mtod(m, uint8_t *);
1108
1109 RX_DPRINTF(("dme_receive: "));
1110 for (i = 0; i< frame_length; i += 1) {
1111 data = bus_space_read_1(sc->sc_iot, sc->sc_ioh, sc->dme_data);
1112 *buf = data;
1113 buf++;
1114 RX_DATA_DPRINTF(("%02X ", data));
1115 }
1116
1117 RX_DATA_DPRINTF(("\n"));
1118 RX_DPRINTF(("Read %d bytes\n", i));
1119
1120 *outBuf = m;
1121 return rx_status;
1122 }
Cache object: f6419ece866d90ba4bd51886fc5811cd
|