FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/elink3reg.h

     /*      $NetBSD: elink3reg.h,v 1.28 2005/02/27 00:27:01 perry Exp $     */
     
     /*
      * Copyright (c) 1995 Herb Peyerl <hpeyerl@beer.org>
      * All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
      * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. All advertising materials mentioning features or use of this software
     *    must display the following acknowledgement:
     *      This product includes software developed by Herb Peyerl.
     * 4. The name of Herb Peyerl may not be used to endorse or promote products
     *    derived from this software without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     *
     */
    
    /*
     * These define the EEPROM data structure.  They are used in the probe
     * function to verify the existence of the adapter after having sent
     * the ID_Sequence.
     */
    #define EEPROM_NODE_ADDR_0      0x0     /* Word */
    #define EEPROM_NODE_ADDR_1      0x1     /* Word */
    #define EEPROM_NODE_ADDR_2      0x2     /* Word */
    #define EEPROM_PROD_ID          0x3     /* 0x9[0-f]50 */
    #define EEPROM_MFG_DATE         0x4     /* Manufacturing date */
    #define EEPROM_MFG_DIVSION      0x5     /* Manufacturing division */
    #define EEPROM_MFG_PRODUCT      0x6     /* Product code */
    #define EEPROM_MFG_ID           0x7     /* 0x6d50 */
    #define EEPROM_ADDR_CFG         0x8     /* Base addr */
    #define EEPROM_RESOURCE_CFG     0x9     /* IRQ. Bits 12-15 */
    #define EEPROM_OEM_ADDR0        0xa
    #define EEPROM_OEM_ADDR1        0xb
    #define EEPROM_OEM_ADDR2        0xc
    #define EEPROM_SOFTINFO         0xd
    #define EEPROM_COMPAT           0xe
    #define EEPROM_SOFTINFO2        0xf
    #define EEPROM_CAP              0x10
    #define EEPROM_CONFIG_LOW       0x12
    #define EEPROM_CONFIG_HIGH      0x13
    #define EEPROM_SSI              0x14
    #define EEPROM_CHECKSUM_EL3     0x17
    
    /*
     * These are the registers for the 3Com 3c509 and their bit patterns when
     * applicable.  They have been taken out of the "EtherLink III Parallel
     * Tasking EISA and ISA Technical Reference" "Beta Draft 10/30/92" manual
     * from 3com.
     */
    #define ELINK_COMMAND   0x0e    /* Write. BASE+0x0e is always a command reg. */
    #define ELINK_STATUS    0x0e    /* Read. BASE+0x0e is always status reg. */
    #define ELINK_WINDOW    0x0f    /* Read. BASE+0x0f is always window reg. */
    
    /*
     * Corkscrew ISA Bridge ASIC registers.
     */
    #define CORK_ASIC_DCR           0x2000
    #define CORK_ASIC_RCR           0x2002
    #define CORK_ASIC_ROM_PAGE      0x2004  /* 8-bit */
    #define CORK_ASIC_MCR           0x2006  /* 8-bit */
    #define CORK_ASIC_DEBUG         0x2008  /* 8-bit */
    #define CORK_ASIC_EEPROM_COMMAND 0x200a
    #define CORK_ASIC_EEPROM_DATA   0x200c
    
    /*
     * Corkscrew DMA Control Register.
     */
    #define DCR_CHRDYWAIT_40ns      (0 << 13)
    #define DCR_CHRDYWAIT_80ns      (1 << 13)
    #define DCR_CHRDYWAIT_120ns     (2 << 13)
    #define DCR_CHRDYWAIT_160ns     (3 << 13)
    #define DCR_RECOVWAIT_80ns      (0 << 11)
    #define DCR_RECOVWAIT_120ns     (1 << 11)
    #define DCR_RECOVWAIT_160ns     (2 << 11)
    #define DCR_RECOVWAIT_200ns     (3 << 11)
    #define DCR_CMDWIDTH(x)         ((x) << 8) /* base 40ns, 40ns increments */
    #define DCR_BURSTLEN(x)         ((x) << 3)
    #define DCR_DRQSELECT(x)        ((x) << 0) /* 3, 5, 6, 7 valid */
    
    /*
     * Corkscrew Debug register.
     */
   #define DEBUG_PCIBUSFAULT       (1U << 0)
   #define DEBUG_ISABUSFAULT       (1U << 1)
   
   /*
    * Corkscrew EEPROM Command register.
    */
   #define CORK_EEPROM_BUSY        (1U << 9)
   #define CORK_EEPROM_CMD_READ    (1U << 7)       /* Same as 3c509 */
   
   /*
    * Corkscrew Master Control register.
    */
   #define MCR_PCI_CONFIG          (1U << 0)
   #define MCR_WRITE_BUFFER        (1U << 1)
   #define MCR_READ_PREFETCH       (1U << 2)
   
   /*
    * Window 0 registers. Setup.
    */
           /* Write */
   #define ELINK_W0_EEPROM_DATA    0x0c
   #define ELINK_W0_EEPROM_COMMAND 0x0a
   #define ELINK_W0_RESOURCE_CFG   0x08
   #define ELINK_W0_ADDRESS_CFG    0x06
   #define ELINK_W0_CONFIG_CTRL    0x04
           /* Read */
   #define ELINK_W0_PRODUCT_ID     0x02
   #define ELINK_W0_MFG_ID         0x00
   
   /*
    * Window 1 registers. Operating Set.
    */
           /* Write */
   #define ELINK_W1_TX_PIO_WR_2    0x02
   #define ELINK_W1_TX_PIO_WR_1    0x00
           /* Read */
   #define ELINK_W1_FREE_TX        0x0c
   #define ELINK_W1_TX_STATUS      0x0a
   #define ELINK_W1_RX_STATUS      0x08
   #define ELINK_W1_RX_ERRORS      0x04
   #define ELINK_W1_RX_PIO_RD_2    0x02
   #define ELINK_W1_RX_PIO_RD_1    0x00
   /*
    * Special registers used by the RoadRunner.  These are used to program
    * a FIFO buffer to reduce the PCMCIA->PCI bridge latency during PIO.
    */
   #define ELINK_W1_RUNNER_RDCTL   0x16
   #define ELINK_W1_RUNNER_WRCTL   0x1c
   
   /*
    * Window 2 registers. Station Address Setup/Read
    */
           /* Read/Write */
   #define ELINK_W2_RECVMASK_0     0x06
   #define ELINK_W2_ADDR_5         0x05
   #define ELINK_W2_ADDR_4         0x04
   #define ELINK_W2_ADDR_3         0x03
   #define ELINK_W2_ADDR_2         0x02
   #define ELINK_W2_ADDR_1         0x01
   #define ELINK_W2_ADDR_0         0x00
   
   /*
    * Window 3 registers.  Configuration and FIFO Management.
    */
           /* Read */
   #define ELINK_W3_FREE_TX                0x0c
   #define ELINK_W3_FREE_RX                0x0a
           /* Read/Write, at least on busmastering cards. */
   #define ELINK_W3_INTERNAL_CONFIG        0x00    /* 32 bits */
   #define ELINK_W3_OTHER_INT              0x04    /*  8 bits */
   #define ELINK_W3_PIO_RESERVED   0x05    /*  8 bits */
   #define ELINK_W3_MAC_CONTROL    0x06    /* 16 bits */
   #define ELINK_W3_RESET_OPTIONS  0x08    /* 16 bits */
   
   /*
    * Window 4 registers. Diagnostics.
    */
           /* Read/Write */
   #define ELINK_W4_MEDIA_TYPE             0x0a
   #define ELINK_W4_CTRLR_STATUS           0x08
   #define ELINK_W4_NET_DIAG               0x06
   #define ELINK_W4_FIFO_DIAG              0x04
   #define ELINK_W4_HOST_DIAG              0x02
   #define ELINK_W4_TX_DIAG                0x00
   
   /*
    * Window 4 offset 8 is the PHY Management register on the
    * 3c90x.
    */
   #define ELINK_W4_BOOM_PHYSMGMT  0x08
   #define PHYSMGMT_CLK            0x0001
   #define PHYSMGMT_DATA           0x0002
   #define PHYSMGMT_DIR            0x0004
   
   
   /*
    * Window 5 Registers.  Results and Internal status.
    */
           /* Read */
   #define ELINK_W5_READ_0_MASK    0x0c
   #define ELINK_W5_INTR_MASK              0x0a
   #define ELINK_W5_RX_FILTER              0x08
   #define ELINK_W5_RX_EARLY_THRESH        0x06
   #define ELINK_W5_TX_AVAIL_THRESH        0x02
   #define ELINK_W5_TX_START_THRESH        0x00
   
   /*
    * Window 6 registers. Statistics.
    */
           /* Read/Write */
   #define TX_TOTAL_OK             0x0c
   #define RX_TOTAL_OK             0x0a
   #define UPPER_FRAMES_OK         0x09
   #define TX_DEFERRALS            0x08
   #define RX_FRAMES_OK            0x07
   #define TX_FRAMES_OK            0x06
   #define RX_OVERRUNS             0x05
   #define TX_COLLISIONS           0x04
   #define TX_AFTER_1_COLLISION    0x03
   #define TX_AFTER_X_COLLISIONS   0x02
   #define TX_NO_SQE               0x01
   #define TX_CD_LOST              0x00
   
   /*
    * Window 7 registers.
    * Address and length for a single bus-master DMA transfer.
    * Unused for elink3 cards.
    */
   #define ELINK_W7_MASTER_ADDDRES 0x00
   #define ELINK_W7_RX_ERROR       0x04
   #define ELINK_W7_MASTER_LEN     0x06
   #define ELINK_W7_RX_STATUS      0x08
   #define ELINK_W7_MASTER_STATUS  0x0c
   
   /*
    * Register definitions.
    */
   
   /*
    * Command register. All windows.
    *
    * 16 bit register.
    *     15-11:  5-bit code for command to be executed.
    *     10-0:   11-bit arg if any. For commands with no args;
    *            this can be set to anything.
    */
   /* Wait at least 1ms after issuing */
   #define GLOBAL_RESET            (u_int16_t) 0x0000
   #define WINDOW_SELECT           (u_int16_t) (0x01<<11)
   /*
    * Read ADDR_CFG reg to determine whether this is needed. If so; wait 800
    * uSec before using transceiver.
    */
   #define START_TRANSCEIVER       (u_int16_t) (0x02<<11)
   /* state disabled on power-up */
   #define RX_DISABLE              (u_int16_t) (0x03<<11)
   #define RX_ENABLE               (u_int16_t) (0x04<<11)
   #define RX_RESET                (u_int16_t) (0x05<<11)
   #define RX_DISCARD_TOP_PACK     (u_int16_t) (0x08<<11)
   #define TX_ENABLE               (u_int16_t) (0x09<<11)
   #define TX_DISABLE              (u_int16_t) (0x0a<<11)
   #define TX_RESET                (u_int16_t) (0x0b<<11)
   #define REQ_INTR                (u_int16_t) (0x0c<<11)
   #define ACK_INTR                (u_int16_t) (0x0d<<11)
   #define SET_INTR_MASK           (u_int16_t) (0x0e<<11)
   /* busmastering-cards only? */
   #define STATUS_ENABLE           (u_int16_t) (0x0f<<11)
   #define SET_RD_0_MASK           (u_int16_t) (0x0f<<11)
   
   #define SET_RX_FILTER           (u_int16_t) (0x10<<11)
   #      define FIL_INDIVIDUAL    (u_int16_t) (0x01)
   #      define FIL_MULTICAST     (u_int16_t) (0x02)
   #      define FIL_BRDCST        (u_int16_t) (0x04)
   #      define FIL_PROMISC       (u_int16_t) (0x08)
   
   #define SET_RX_EARLY_THRESH     (u_int16_t) (0x11<<11)
   #define SET_TX_AVAIL_THRESH     (u_int16_t) (0x12<<11)
   #define SET_TX_START_THRESH     (u_int16_t) (0x13<<11)
   #define START_DMA               (u_int16_t) (0x14<<11)  /* busmaster-only */
   #  define START_DMA_TX          (START_DMA | 0x0))      /* busmaster-only */
   #  define START_DMA_RX          (START_DMA | 0x1)       /* busmaster-only */
   #define STATS_ENABLE            (u_int16_t) (0x15<<11)
   #define STATS_DISABLE           (u_int16_t) (0x16<<11)
   #define STOP_TRANSCEIVER        (u_int16_t) (0x17<<11)
   
   /* Only on adapters that support power management: */
   #define POWERUP                 (u_int16_t) (0x1b<<11)
   #define POWERDOWN               (u_int16_t) (0x1c<<11)
   #define POWERAUTO               (u_int16_t) (0x1d<<11)
   
   
   
   /*
    * Command parameter that disables threshold interrupts
    *   PIO (3c509) cards use 2044.  The fifo word-oriented and 2044--2047 work.
    *  "busmastering" cards need 8188.
    * The implicit two-bit upshift done by busmastering cards means
    * a value of 2047 disables threshold interrupts on both.
    */
   #define ELINK_THRESH_DISABLE    2047
   
   
   /*
    * Status register. All windows.
    *
    *     15-13:  Window number(0-7).
    *     12:     Command_in_progress.
    *     11:     reserved / DMA in progress on busmaster cards.
    *     10:     reserved.
    *     9:      reserved.
    *     8:      reserved / DMA done on busmaster cards.
    *     7:      Update Statistics.
    *     6:      Interrupt Requested.
    *     5:      RX Early.
    *     4:      RX Complete.
    *     3:      TX Available.
    *     2:      TX Complete.
    *     1:      Adapter Failure.
    *     0:      Interrupt Latch.
    */
   #define INTR_LATCH              (u_int16_t) (0x0001)
   #define CARD_FAILURE            (u_int16_t) (0x0002)
   #define TX_COMPLETE             (u_int16_t) (0x0004)
   #define TX_AVAIL                (u_int16_t) (0x0008)
   #define RX_COMPLETE             (u_int16_t) (0x0010)
   #define RX_EARLY                (u_int16_t) (0x0020)
   #define INT_RQD                 (u_int16_t) (0x0040)
   #define UPD_STATS               (u_int16_t) (0x0080)
   #define DMA_DONE                (u_int16_t) (0x0100)    /* DMA cards only */
   #define DMA_IN_PROGRESS         (u_int16_t) (0x0800)    /* DMA cards only */
   #define COMMAND_IN_PROGRESS     (u_int16_t) (0x1000)
   
   #define ALL_INTERRUPTS  (CARD_FAILURE | TX_COMPLETE | TX_AVAIL | RX_COMPLETE | \
       RX_EARLY | INT_RQD | UPD_STATS)
   
   #define WATCHED_INTERRUPTS (CARD_FAILURE | TX_COMPLETE | RX_COMPLETE | TX_AVAIL)
   
   /*
    * FIFO Registers.  RX Status.
    *
    *     15:     Incomplete or FIFO empty.
    *     14:     1: Error in RX Packet   0: Incomplete or no error.
    *     14-11:  Type of error. [14-11]
    *            1000 = Overrun.
    *            1011 = Run Packet Error.
    *            1100 = Alignment Error.
    *            1101 = CRC Error.
    *            1001 = Oversize Packet Error (>1514 bytes)
    *            0010 = Dribble Bits.
    *            (all other error codes, no errors.)
    *
    *     10-0:   RX Bytes (0-1514)
    */
   #define ERR_INCOMPLETE  (u_int16_t) (0x8000)
   #define ERR_RX          (u_int16_t) (0x4000)
   #define ERR_MASK        (u_int16_t) (0x7800)
   #define ERR_OVERRUN     (u_int16_t) (0x4000)
   #define ERR_RUNT        (u_int16_t) (0x5800)
   #define ERR_ALIGNMENT   (u_int16_t) (0x6000)
   #define ERR_CRC         (u_int16_t) (0x6800)
   #define ERR_OVERSIZE    (u_int16_t) (0x4800)
   #define ERR_DRIBBLE     (u_int16_t) (0x1000)
   
   /*
    * TX Status
    *
    *   Reports the transmit status of a completed transmission. Writing this
    *   register pops the transmit completion stack.
    *
    *   Window 1/Port 0x0b.
    *
    *     7:      Complete
    *     6:      Interrupt on successful transmission requested.
    *     5:      Jabber Error (TP Only, TX Reset required. )
    *     4:      Underrun (TX Reset required. )
    *     3:      Maximum Collisions.
    *     2:      TX Status Overflow.
    *     1-0:    Undefined.
    *
    */
   #define TXS_COMPLETE            0x8000
   #define TXS_INTR_REQ            0x4000
   #define TXS_JABBER              0x2000
   #define TXS_UNDERRUN            0x1000
   #define TXS_MAX_COLLISION       0x0800
   #define TXS_STATUS_OVERFLOW     0x0400
   #define TXS_TIMER               0x00ff
   
   /*
    * RX status
    *   Window 1/Port 0x08.
    */
   #define RX_BYTES_MASK                   (u_int16_t) (0x07ff)
   
   /*
    * Internal Config and MAC control (Window 3)
    * Window 3 / Port 0: 32-bit internal config register:
    * bits  0-2:    fifo buffer ram  size
    *         3:    ram width (word/byte)     (ro)
    *       4-5:    ram speed
    *       6-7:    rom size
    *      8-15:   reserved
    *
    *     16-17:   ram split (5:3, 3:1, or 1:1).
    *     18-19:   reserved
    *     20-22:   selected media type
    *        21:   unused
    *        24:  (nonvolatile) driver should autoselect media
    *     25-31: reserved
    *
    * The low-order 16 bits should generally not be changed by software.
    * Offsets defined for two 16-bit words, to help out 16-bit busses.
    */
   #define CONFIG_RAMSIZE          (u_int16_t) 0x0007
   #define CONFIG_RAMSIZE_SHIFT    0
   
   #define CONFIG_RAMWIDTH         (u_int16_t) 0x0008
   #define CONFIG_RAMWIDTH_SHIFT   3
   
   #define CONFIG_RAMSPEED         (u_int16_t) 0x0030
   #define CONFIG_RAMSPEED_SHIFT   4
   #define CONFIG_ROMSIZE          (u_int16_t) 0x00c0
   #define CONFIG_ROMSIZE_SHIFT    6
   
   /* Window 3/port 2 */
   #define CONFIG_RAMSPLIT         (u_int16_t) 0x0003
   #define CONFIG_RAMSPLIT_SHIFT   0
   #define CONFIG_MEDIAMASK        (u_int16_t) 0x0070
   #define CONFIG_MEDIAMASK_SHIFT  4
   
   #define CONFIG_AUTOSELECT       (u_int16_t) 0x0100
   #define CONFIG_AUTOSELECT_SHIFT 8
   
   /*
    * MAC_CONTROL (Window 3)
    */
   #define MAC_CONTROL_FDX         0x20    /* full-duplex mode */
   
   
   /* Active media in INTERNAL_CONFIG media bits */
   
   #define ELINKMEDIA_10BASE_T             (u_int16_t)   0x00
   #define ELINKMEDIA_AUI                  (u_int16_t)   0x01
   #define ELINKMEDIA_RESV1                (u_int16_t)   0x02
   #define ELINKMEDIA_10BASE_2             (u_int16_t)   0x03
   #define ELINKMEDIA_100BASE_TX           (u_int16_t)   0x04
   #define ELINKMEDIA_100BASE_FX           (u_int16_t)   0x05
   #define ELINKMEDIA_MII                  (u_int16_t)   0x06
   #define ELINKMEDIA_100BASE_T4           (u_int16_t)   0x07
   
   
   /*
    * RESET_OPTIONS (Window 3, on Demon/Vortex/Boomerang only)
    * also mapped to PCI configuration space on PCI adaptors.
    *
    * (same register as  Vortex ELINK_W3_RESET_OPTIONS, mapped to pci-config space)
    */
   #define ELINK_PCI_100BASE_T4            (1<<0)
   #define ELINK_PCI_100BASE_TX            (1<<1)
   #define ELINK_PCI_100BASE_FX            (1<<2)
   #define ELINK_PCI_10BASE_T                      (1<<3)
   #define ELINK_PCI_BNC                   (1<<4)
   #define ELINK_PCI_AUI                   (1<<5)
   #define ELINK_PCI_100BASE_MII           (1<<6)
   #define ELINK_PCI_INTERNAL_VCO          (1<<8)
   
   #define ELINK_PCI_MEDIAMASK     (ELINK_PCI_100BASE_T4|ELINK_PCI_100BASE_TX| \
                                    ELINK_PCI_100BASE_FX|ELINK_PCI_10BASE_T| \
                                    ELINK_PCI_BNC|ELINK_PCI_AUI| \
                                    ELINK_PCI_100BASE_MII)
   
   #define ELINK_RUNNER_MII_RESET          0x4000
   #define ELINK_RUNNER_ENABLE_MII         0x8000
   
   /*
    * FIFO Status (Window 4)
    *
    *   Supports FIFO diagnostics
    *
    *   Window 4/Port 0x04.1
    *
    *     15:      1=RX receiving (RO). Set when a packet is being received
    *              into the RX FIFO.
    *     14:      Reserved
    *     13:      1=RX underrun (RO). Generates Adapter Failure interrupt.
    *              Requires RX Reset or Global Reset command to recover.
    *              It is generated when you read past the end of a packet -
    *              reading past what has been received so far will give bad
    *              data.
    *     12:      1=RX status overrun (RO). Set when there are already 8
    *              packets in the RX FIFO. While this bit is set, no additional
    *              packets are received. Requires no action on the part of
    *              the host. The condition is cleared once a packet has been
    *              read out of the RX FIFO.
    *     11:      1=RX overrun (RO). Set when the RX FIFO is full (there
    *              may not be an overrun packet yet). While this bit is set,
    *              no additional packets will be received (some additional
    *              bytes can still be pending between the wire and the RX
    *              FIFO). Requires no action on the part of the host. The
    *              condition is cleared once a few bytes have been read out
    *              from the RX FIFO.
    *     10:      1=TX overrun (RO). Generates adapter failure interrupt.
    *              Requires TX Reset or Global Reset command to recover.
    *              Disables Transmitter.
    *     9-8:     Unassigned.
    *     7-0:     Built in self test bits for the RX and TX FIFO's.
    */
   #define FIFOS_RX_RECEIVING      (u_int16_t) 0x8000
   #define FIFOS_RX_UNDERRUN       (u_int16_t) 0x2000
   #define FIFOS_RX_STATUS_OVERRUN (u_int16_t) 0x1000
   #define FIFOS_RX_OVERRUN        (u_int16_t) 0x0800
   #define FIFOS_TX_OVERRUN        (u_int16_t) 0x0400
   
   /*
    * ISA/eisa CONFIG_CNTRL media-present bits.
    */
   #define ELINK_W0_CC_AUI                         (1<<13)
   #define ELINK_W0_CC_BNC                         (1<<12)
   #define ELINK_W0_CC_UTP                         (1<<9)
   #define ELINK_W0_CC_MEDIAMASK   (ELINK_W0_CC_AUI|ELINK_W0_CC_BNC| \
                                    ELINK_W0_CC_UTP)
   
   /* EEPROM state flags/commands */
   #define EEPROM_BUSY                     (1<<15)
   #define EEPROM_TST_MODE                 (1<<14)
   
   #define READ_EEPROM                     (1<<7)
   
           /* For the RoadRunner chips... */
   #define WRITE_EEPROM_RR                 0x100
   #define READ_EEPROM_RR                  0x200
   #define ERASE_EEPROM_RR                 0x300
   
   /* window 4, MEDIA_STATUS bits */
   #define SQE_ENABLE                      0x08    /* Enables SQE on AUI ports */
   #define JABBER_GUARD_ENABLE             0x40
   #define LINKBEAT_ENABLE                 0x80
   #define DISABLE_UTP                     0x0
   #define LINKBEAT_DETECT                 0x800
   
   /*
    * Misc defines for various things.
    */
   #define TAG_ADAPTER                     0xd0
   #define ACTIVATE_ADAPTER_TO_CONFIG      0xff
   #define ENABLE_DRQ_IRQ                  0x0001
   #define MFG_ID                          0x506d  /* `TCM' */
   #define PROD_ID_3C509                   0x5090  /* 509[0-f] */
   #define GO_WINDOW(x)                    bus_space_write_2(sc->sc_iot, \
                                   sc->sc_ioh, ELINK_COMMAND, WINDOW_SELECT|x)
   
   
   /* Used to probe for large-packet support. */
   #define ELINK_LARGEWIN_PROBE            ELINK_THRESH_DISABLE
   #define ELINK_LARGEWIN_MASK             0xffc

Cache object: 36358e1fc87cb01959baa4cd5b158656