FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/fmv.c
1 /* $NetBSD: fmv.c,v 1.7 2005/12/11 12:21:26 christos Exp $ */
2
3 /*
4 * All Rights Reserved, Copyright (C) Fujitsu Limited 1995
5 *
6 * This software may be used, modified, copied, distributed, and sold, in
7 * both source and binary form provided that the above copyright, these
8 * terms and the following disclaimer are retained. The name of the author
9 * and/or the contributor may not be used to endorse or promote products
10 * derived from this software without specific prior written permission.
11 *
12 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
13 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
14 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
15 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
16 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
17 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
18 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
19 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
20 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
21 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
22 * SUCH DAMAGE.
23 */
24
25 /*
26 * Portions copyright (C) 1993, David Greenman. This software may be used,
27 * modified, copied, distributed, and sold, in both source and binary form
28 * provided that the above copyright and these terms are retained. Under no
29 * circumstances is the author responsible for the proper functioning of this
30 * software, nor does the author assume any responsibility for damages
31 * incurred with its use.
32 */
33
34 #include <sys/cdefs.h>
35 __KERNEL_RCSID(0, "$NetBSD: fmv.c,v 1.7 2005/12/11 12:21:26 christos Exp $");
36
37 #include <sys/param.h>
38 #include <sys/systm.h>
39 #include <sys/device.h>
40
41 #include <net/if.h>
42 #include <net/if_ether.h>
43 #include <net/if_media.h>
44
45 #include <machine/bus.h>
46
47 #include <dev/ic/mb86960reg.h>
48 #include <dev/ic/mb86960var.h>
49 #include <dev/ic/fmvreg.h>
50 #include <dev/ic/fmvvar.h>
51
52 /*
53 * Determine type and ethernet address.
54 */
55 int
56 fmv_detect(bus_space_tag_t iot, bus_space_handle_t ioh, uint8_t *enaddr)
57 {
58 int model, id, type;
59
60 /* Get our station address from EEPROM. */
61 bus_space_read_region_1(iot, ioh, FE_FMV4, enaddr, ETHER_ADDR_LEN);
62
63 /* Make sure we got a valid station address. */
64 if ((enaddr[0] & 0x03) != 0x00 ||
65 (enaddr[0] == 0x00 && enaddr[1] == 0x00 && enaddr[2] == 0x00)) {
66 #ifdef FMV_DEBUG
67 printf("fmv_detect: invalid ethernet address\n");
68 #endif
69 return (0);
70 }
71
72 /* Determine the card type. */
73 model = bus_space_read_1(iot, ioh, FE_FMV0) & FE_FMV0_MODEL;
74 id = bus_space_read_1(iot, ioh, FE_FMV1) & FE_FMV1_CARDID_REV;
75
76 switch (model) {
77 case FE_FMV0_MODEL_FMV181:
78 type = FE_TYPE_FMV181;
79 if (id == FE_FMV1_CARDID_REV_A)
80 type = FE_TYPE_FMV181A;
81 break;
82 case FE_FMV0_MODEL_FMV182:
83 type = FE_TYPE_FMV182;
84 if (id == FE_FMV1_CARDID_REV_A)
85 type = FE_TYPE_FMV182A;
86 else if (id == FE_FMV1_CARDID_PNP)
87 type = FE_TYPE_FMV184;
88 break;
89 case FE_FMV0_MODEL_FMV183:
90 type = FE_TYPE_FMV183;
91 break;
92 default:
93 type = 0;
94 #ifdef FMV_DEBUG
95 printf("fmv_detect: unknown card\n");
96 #endif
97 break;
98 }
99
100 return (type);
101 }
102
103 void
104 fmv_attach(struct mb86960_softc *sc)
105 {
106 bus_space_tag_t iot;
107 bus_space_handle_t ioh;
108 const char *typestr;
109 int type;
110 uint8_t myea[ETHER_ADDR_LEN];
111
112 iot = sc->sc_bst;
113 ioh = sc->sc_bsh;
114
115 /* Determine the card type. */
116 type = fmv_detect(iot, ioh, myea);
117 switch (type) {
118 case FE_TYPE_FMV181:
119 typestr = "FMV-181";
120 break;
121 case FE_TYPE_FMV181A:
122 typestr = "FMV-181A";
123 break;
124 case FE_TYPE_FMV182:
125 typestr = "FMV-182";
126 break;
127 case FE_TYPE_FMV182A:
128 typestr = "FMV-182A";
129 break;
130 case FE_TYPE_FMV183:
131 typestr = "FMV-183";
132 break;
133 case FE_TYPE_FMV184:
134 typestr = "FMV-184";
135 break;
136 default:
137 /* Unknown card type: maybe a new model, but... */
138 panic("\n%s: unknown FMV-18x card", sc->sc_dev.dv_xname);
139 }
140
141 printf(": %s Ethernet\n", typestr);
142
143 /* This interface is always enabled. */
144 sc->sc_stat |= FE_STAT_ENABLED;
145
146 /*
147 * Minimum initialization of the hardware.
148 * We write into registers; hope I/O ports have no
149 * overlap with other boards.
150 */
151
152 /* Initialize ASIC. */
153 bus_space_write_1(iot, ioh, FE_FMV3, 0);
154 bus_space_write_1(iot, ioh, FE_FMV10, 0);
155
156 /* Wait for a while. I'm not sure this is necessary. FIXME */
157 delay(200);
158
159 /*
160 * Do generic MB86960 attach.
161 */
162 mb86960_attach(sc, myea);
163
164 /* Is this really needs to be done here? XXX */
165 /* Turn the "master interrupt control" flag of ASIC on. */
166 bus_space_write_1(iot, ioh, FE_FMV3, FE_FMV3_ENABLE_FLAG);
167
168 mb86960_config(sc, NULL, 0, 0);
169 }
Cache object: 84eb3cfc89076aacfe4653ab94d20090
|