FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/nec765.h

     /*-
      * Copyright (c) 1991 The Regents of the University of California.
      * All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
      * are met:
      * 1. Redistributions of source code must retain the above copyright
      *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. All advertising materials mentioning features or use of this software
     *    must display the following acknowledgement:
     *      This product includes software developed by the University of
     *      California, Berkeley and its contributors.
     * 4. Neither the name of the University nor the names of its contributors
     *    may be used to endorse or promote products derived from this software
     *    without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     *
     *      from: @(#)nec765.h      7.1 (Berkeley) 5/9/91
     * $FreeBSD: releng/5.0/sys/dev/ic/nec765.h 88010 2001-12-16 07:52:13Z joerg $
     */
    
    /*
     * Nec 765 floppy disc controller definitions
     */
    
    /* Main status register */
    #define NE7_DAB 0x01    /* Diskette drive A is seeking, thus busy */
    #define NE7_DBB 0x02    /* Diskette drive B is seeking, thus busy */
    #define NE7_CB  0x10    /* Diskette Controller Busy */
    #define NE7_NDM 0x20    /* Diskette Controller in Non Dma Mode */
    #define NE7_DIO 0x40    /* Diskette Controller Data register I/O */
    #define NE7_RQM 0x80    /* Diskette Controller ReQuest for Master */
    
    /* Status register ST0 */
    #define NE7_ST0BITS     "\020\010invld\007abnrml\006seek_cmplt\005equ_chck\004drive_notrdy\003top_head"
    
    #define NE7_ST0_IC      0xc0    /* interrupt completion code */
    
    #define NE7_ST0_IC_RC   0xc0    /* terminated due to ready changed, n/a */
    #define NE7_ST0_IC_IV   0x80    /* invalid command; must reset FDC */
    #define NE7_ST0_IC_AT   0x40    /* abnormal termination, check error stat */
    #define NE7_ST0_IC_NT   0x00    /* normal termination */
    
    #define NE7_ST0_SE      0x20    /* seek end */
    #define NE7_ST0_EC      0x10    /* equipment check, recalibrated but no trk0 */
    #define NE7_ST0_NR      0x08    /* not ready (n/a) */
    #define NE7_ST0_HD      0x04    /* upper head selected */
    #define NE7_ST0_DR      0x03    /* drive code */
    
    /* Status register ST1 */
    #define NE7_ST1BITS     "\020\010end_of_cyl\006bad_crc\005data_overrun\003sec_not_fnd\002write_protect\001no_am"
    
    #define NE7_ST1_EN      0x80    /* end of cylinder, access past last record */
    #define NE7_ST1_DE      0x20    /* data error, CRC fail in ID or data */
    #define NE7_ST1_OR      0x10    /* DMA overrun, DMA failed to do i/o quickly */
    #define NE7_ST1_ND      0x04    /* no data, sector not found or CRC in ID f. */
    #define NE7_ST1_NW      0x02    /* not writeable, attempt to violate WP */
    #define NE7_ST1_MA      0x01    /* missing address mark (in ID or data field)*/
    
    /* Status register ST2 */
    #define NE7_ST2BITS     "\020\007ctrl_mrk\006bad_crc\005wrong_cyl\004scn_eq\003scn_not_fnd\002bad_cyl\001no_dam"
    
    #define NE7_ST2_CM      0x40    /* control mark; found deleted data */
    #define NE7_ST2_DD      0x20    /* data error in data field, CRC fail */
    #define NE7_ST2_WC      0x10    /* wrong cylinder, ID field mismatches cmd */
    #define NE7_ST2_SH      0x08    /* scan equal hit */
    #define NE7_ST2_SN      0x04    /* scan not satisfied */
    #define NE7_ST2_BC      0x02    /* bad cylinder, cylinder marked 0xff */
    #define NE7_ST2_MD      0x01    /* missing address mark in data field */
    
    /* Status register ST3 */
    #define NE7_ST3BITS     "\020\010fault\007write_protect\006drdy\005tk0\004two_side\003side_sel\002"
    
    #define NE7_ST3_FT      0x80    /* fault; PC: n/a */
    #define NE7_ST3_WP      0x40    /* write protected */
    #define NE7_ST3_RD      0x20    /* ready; PC: always true */
    #define NE7_ST3_T0      0x10    /* track 0 */
    #define NE7_ST3_TS      0x08    /* two-sided; PC: n/a */
    #define NE7_ST3_HD      0x04    /* upper head select */
    #define NE7_ST3_US      0x03    /* unit select */
    
    /* Commands */
    /*
     * the top three bits -- where appropriate -- are set as follows:
    *
    * MT  - multi-track; allow both sides to be handled in single cmd
    * MFM - modified frequency modulation; use MFM encoding
    * SK  - skip; skip sectors marked as "deleted"
    */
   
   #define NE7CMD_MT       0x80    /* READ, WRITE, WRITEDEL, READDEL, SCAN* */
   #define NE7CMD_MFM      0x40    /* same as MT, plus READTRK, READID, FORMAT */
   #define NE7CMD_SK       0x20    /* READ, READDEL, SCAN* */
   
   #define NE7CMD_READTRK  2       /*  read whole track */
   #define NE7CMD_SPECIFY  3       /*  specify drive parameters - requires unit
                                    *  parameters byte */
   #define NE7CMD_SENSED   4       /*  sense drive - requires unit select byte */
   #define NE7CMD_WRITE    5       /*  write - requires eight additional bytes */
   #define NE7CMD_READ     6       /*  read - requires eight additional bytes */
   #define NE7CMD_RECAL    7       /*  recalibrate drive - requires
                                    *  unit select byte */
   #define NE7CMD_SENSEI   8       /*  sense controller interrupt status */
   #define NE7CMD_WRITEDEL 9       /*  write deleted data */
   #define NE7CMD_READID   0xa     /*  read ID field */
   #define NE7CMD_READDEL  0xc     /*  read deleted data */
   #define NE7CMD_FORMAT   0xd     /*  format - requires five additional bytes */
   #define NE7CMD_SEEK     0xf     /*  seek drive - requires unit select byte
                                    *  and new cyl byte */
   #define NE7CMD_SCNEQU   0x11    /*  scan equal */
   #define NE7CMD_SCNLE    0x19    /*  scan less or equal */
   #define NE7CMD_SCNGE    0x1d    /*  scan greater or equal */
   
   /*
    * Enhanced controller commands:
    */
   #define NE7CMD_VERSION  0x10    /*  version (ok for all controllers) */
   
   #define I8207X_CONFIGURE 0x13   /*  configure enhanced features */
   
   /*
    * "specify" definitions
    *
    * acronyms (times are relative to a FDC clock of 8 MHz):
    * srt - step rate; PC usually 3 ms
    * hut - head unload time; PC usually maximum of 240 ms
    * hlt - head load time; PC usually minimum of 2 ms
    * nd  - no DMA flag; PC usually not set (0)
    */
   
   #define NE7_SPEC_1(srt, hut) (((16 - (srt)) << 4) | (((hut) / 16)))
   #define NE7_SPEC_2(hlt, nd)  (((hlt) & 0xFE) | ((nd) & 1))

Cache object: 9b49c7cfeb47e8e13ad10c6425ea07ed