FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/ugreg.h

     /* $NetBSD: ugreg.h,v 1.1.2.3 2007/05/13 22:13:28 pavel Exp $ */
     
     /*
      * Copyright (c) 2007 Mihai Chelaru <kefren@netbsd.ro>
      * All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
      * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. The name of the author may not be used to endorse or promote products
     *    derived from this software without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
     * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
     * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
     * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     */
    
    #ifndef _UGREG_H_
    #define _UGREG_H_
    
    #define UG_DRV_VERSION  1000
    
    /*
     * Abit uGuru (first version)
     */
    
    #define UG_DELAY_CYCLES 5000
    #define UG_NUM_SENSORS  19
    #define UG_MAX_SENSORS  32
    
    /* Data and Cmd offsets - Base is ussualy 0xE0 */
    #define UG_CMD          0
    #define UG_DATA         4
    
    /* Temp and Voltage Sensors */
    #define UG_CPUTEMP      0x2100
    #define UG_SYSTEMP      0x2101
    #define UG_HTV          0x2102
    #define UG_VCORE        0x2103
    #define UG_DDRVDD       0x2104
    #define UG_3V3          0x2105
    #define UG_5V           0x2106
    #define UG_NBVDD        0x2108
    #define UG_AGP          0x2109
    #define UG_DDRVTT       0x210A
    #define UG_5VSB         0x210B
    #define UG_3VDUAL       0x210D
    #define UG_SBVDD        0x210E
    #define UG_PWMTEMP      0x210F
    
    /* Fans */
    #define UG_CPUFAN       0x2600
    #define UG_NBFAN        0x2601
    #define UG_SYSFAN       0x2602
    #define UG_AUXFAN1      0x2603
    #define UG_AUXFAN2      0x2604
    
    /* RFacts */
    #define UG_RFACT        1000
    #define UG_RFACT3       3490 * UG_RFACT / 255
    #define UG_RFACT4       4360 * UG_RFACT / 255
    #define UG_RFACT6       6250 * UG_RFACT / 255
    #define UG_RFACT_FAN    15300/255
    
    /* Voltage and Fan sensors offsets */
    #define UG_VOLT_MIN     3
    #define UG_FAN_MIN      14
    
    /*
     * Abit uGuru2 or uGuru 2005 settings
     */
    
    /* Sensor banks */
    #define UG2_SETTINGS_BANK               0x01
    #define UG2_SENSORS_BANK                0x08
    #define UG2_MISC_BANK                   0x09
    
    /* Sensor offsets */
    #define UG2_ALARMS_OFFSET               0x1E
    #define UG2_SETTINGS_OFFSET             0x24
    #define UG2_VALUES_OFFSET               0x80
    
    /* Misc Sensor */
    #define UG2_BOARD_ID                    0x0A
    
    /* sensor types */
    #define UG2_VOLTAGE_SENSOR              0
    #define UG2_TEMP_SENSOR                 1
    #define UG2_FAN_SENSOR                  2
   
   /* uGuru status flags */
   #define UG2_STATUS_READY_FOR_READ       0x01
   #define UG2_STATUS_BUSY                 0x02
   /* No more than 32 sensors */
   #define UG2_MAX_NO_SENSORS 32
   
   /* Unknown board should be the last. Now is 0x0016 */
   #define UG_MAX_MSB_BOARD 0x00
   #define UG_MAX_LSB_BOARD 0x16
   #define UG_MIN_LSB_BOARD 0x0c
   
   #endif          /* _UGREG_H_ */

Cache object: 513ae2895105fda2ef0329e90bc38560