FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/uhareg.h

     /*      $NetBSD: uhareg.h,v 1.9 2003/05/03 18:11:24 wiz Exp $   */
     
     /*-
      * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
      * All rights reserved.
      *
      * This code is derived from software contributed to The NetBSD Foundation
      * by Charles M. Hannum and by Jason R. Thorpe of the Numerical Aerospace
      * Simulation Facility, NASA Ames Research Center.
     *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. All advertising materials mentioning features or use of this software
     *    must display the following acknowledgement:
     *      This product includes software developed by the NetBSD
     *      Foundation, Inc. and its contributors.
     * 4. Neither the name of The NetBSD Foundation nor the names of its
     *    contributors may be used to endorse or promote products derived
     *    from this software without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     * POSSIBILITY OF SUCH DAMAGE.
     */
    
    /*
     * Ported for use with the UltraStor 14f by Gary Close (gclose@wvnvms.wvnet.edu)
     * Slight fixes to timeouts to run with the 34F
     * Thanks to Julian Elischer for advice and help with this port.
     *
     * Originally written by Julian Elischer (julian@tfs.com)
     * for TRW Financial Systems for use under the MACH(2.5) operating system.
     *
     * TRW Financial Systems, in accordance with their agreement with Carnegie
     * Mellon University, makes this software available to CMU to distribute
     * or use in any manner that they see fit as long as this message is kept with
     * the software. For this reason TFS also grants any other persons or
     * organisations permission to use or modify this software.
     *
     * TFS supplies this software to be publicly redistributed
     * on the understanding that TFS is not responsible for the correct
     * functioning of this software in any circumstances.
     *
     * commenced: Sun Sep 27 18:14:01 PDT 1992
     * slight mod to make work with 34F as well: Wed Jun  2 18:05:48 WST 1993
     */
    
    typedef u_long physaddr;
    typedef u_long physlen;
    
    /************************** board definitions *******************************/
    /*
     * I/O Port Interface
     */
    #define U14_LMASK               0x0000  /* local doorbell mask reg */
    #define U14_LINT                0x0001  /* local doorbell int/stat reg */
    #define U14_SMASK               0x0002  /* system doorbell mask reg */
    #define U14_SINT                0x0003  /* system doorbell int/stat reg */
    #define U14_ID                  0x0004  /* product id reg (2 ports) */
    #define U14_CONFIG              0x0006  /* config reg (2 ports) */
    #define U14_OGMPTR              0x0008  /* outgoing mail ptr (4 ports) */
    #define U14_ICMPTR              0x000c  /* incoming mail ptr (4 ports) */
    
    #define U24_CONFIG              0x0005  /* config reg (3 ports) */
    #define U24_LMASK               0x000c  /* local doorbell mask reg */
    #define U24_LINT                0x000d  /* local doorbell int/stat reg */
    #define U24_SMASK               0x000e  /* system doorbell mask reg */
    #define U24_SINT                0x000f  /* system doorbell int/stat reg */
    #define U24_OGMCMD              0x0016  /* outgoing commands */
    #define U24_OGMPTR              0x0017  /* outgoing mail ptr (4 ports) */
    #define U24_ICMCMD              0x001b  /* incoming commands */
    #define U24_ICMPTR              0x001c  /* incoming mail ptr (4 ports) */
    
    /*
     * UHA_LMASK bits (read only)
     */
    #define UHA_LDIE                0x80    /* local doorbell int enabled */
    #define UHA_SRSTE               0x40    /* soft reset enabled */
    #define UHA_ABORTEN             0x10    /* abort MSCP enabled */
    #define UHA_OGMINTEN            0x01    /* outgoing mail interrupt enabled */
    
    /*
     * UHA_LINT bits (read only)
     */
    #define U14_LDIP                0x80    /* local doorbell int pending */
   #define U24_LDIP                0x02    /* local doorbell int pending */
   
   /*
    * UHA_LINT bits (write only)
    */
   #define U14_OGMFULL             0x01    /* outgoing mailbox is full */
   #define U14_ABORT               0x10    /* abort MSCP */
   
   #define U24_OGMFULL             0x02    /* outgoing mailbox is full */
   
   #define UHA_SBRST               0x40    /* scsi bus reset */
   #define UHA_ADRST               0x80    /* adapter soft reset */
   #define UHA_ASRST               0xc0    /* adapter and scsi reset */
   
   /*
    * UHA_SMASK bits (read/write)
    */
   #define UHA_ENSINT              0x80    /* enable system doorbell interrupt */
   #define UHA_EN_ABORT_COMPLETE   0x10    /* enable abort MSCP complete int */
   #define UHA_ENICM               0x01    /* enable ICM interrupt */
   
   /*
    * UHA_SINT bits (read)
    */
   #define U14_SDIP                0x80    /* system doorbell int pending */
   #define U24_SDIP                0x02    /* system doorbell int pending */
   
   #define UHA_ABORT_SUCC          0x10    /* abort MSCP successful */
   #define UHA_ABORT_FAIL          0x18    /* abort MSCP failed */
   
   /*
    * UHA_SINT bits (write)
    */
   #define U14_ICM_ACK             0x01    /* acknowledge ICM and clear */
   #define U24_ICM_ACK             0x02    /* acknowledge ICM and clear */
   
   #define UHA_ABORT_ACK           0x18    /* acknowledge status and clear */
   
   /*
    * U14_CONFIG bits (read only)
    */
   #define U14_DMA_CH5             0x0000  /* DMA channel 5 */
   #define U14_DMA_CH6             0x4000  /* 6 */
   #define U14_DMA_CH7             0x8000  /* 7 */
   #define U14_DMA_MASK            0xc000
   #define U14_IRQ15               0x0000  /* IRQ 15 */
   #define U14_IRQ14               0x1000  /* 14 */
   #define U14_IRQ11               0x2000  /* 11 */
   #define U14_IRQ10               0x3000  /* 10 */
   #define U14_IRQ_MASK            0x3000
   #define U14_HOSTID_MASK         0x0007
   
   /*
    * U24_CONFIG bits (read only)
    */
   #define U24_MAGIC1              0x08
   #define U24_IRQ15               0x10
   #define U24_IRQ14               0x20
   #define U24_IRQ11               0x40
   #define U24_IRQ10               0x80
   #define U24_IRQ_MASK            0xf0
   
   #define U24_MAGIC2              0x04
   
   #define U24_HOSTID_MASK         0x07
   
   /*
    * EISA registers (offset from slot base)
    */
   #define EISA_VENDOR             0x0c80  /* vendor ID (2 ports) */
   #define EISA_MODEL              0x0c82  /* model number (2 ports) */
   #define EISA_CONTROL            0x0c84
   #define  EISA_RESET             0x04
   #define  EISA_ERROR             0x02
   #define  EISA_ENABLE            0x01
   
   /*
    * host_stat error codes
    */
   #define UHA_NO_ERR              0x00    /* No error supposedly */
   #define UHA_SBUS_ABORT_ERR      0x84    /* scsi bus abort error */
   #define UHA_SBUS_TIMEOUT        0x91    /* scsi bus selection timeout */
   #define UHA_SBUS_OVER_UNDER     0x92    /* scsi bus over/underrun */
   #define UHA_BAD_SCSI_CMD        0x96    /* illegal scsi command */
   #define UHA_AUTO_SENSE_ERR      0x9b    /* auto request sense err */
   #define UHA_SBUS_RES_ERR        0xa3    /* scsi bus reset error */
   #define UHA_BAD_SG_LIST         0xff    /* invalid scatter gath list */
   
   #define UHA_NSEG        33      /* number of DMA segments supported */
   
   struct uha_dma_seg {
           physaddr seg_addr;
           physlen seg_len;
   };
   
   #pragma pack(1)
   struct uha_mscp {
           u_char opcode:3;
   #define UHA_HAC         0x01    /* host adapter command */
   #define UHA_TSP         0x02    /* target scsi pass through command */
   #define UHA_SDR         0x04    /* scsi device reset */
           u_char xdir:2;          /* xfer direction */
   #define UHA_SDET        0x00    /* determined by scsi command */
   #define UHA_SDIN        0x01    /* scsi data in */
   #define UHA_SDOUT       0x02    /* scsi data out */
   #define UHA_NODATA      0x03    /* no data xfer */
           u_char dcn:1;           /* disable disconnect for this command */
           u_char ca:1;            /* cache control */
           u_char sgth:1;          /* scatter gather flag */
           u_char target:3;
           u_char chan:2;          /* scsi channel (always 0 for 14f) */
           u_char lun:3;
           physaddr data_addr;
           physlen data_length;
           physaddr link_addr;
           u_char link_id;
           u_char sg_num;          /* number of scat gath segs */
           /*in s-g list if sg flag is */
           /*set. starts at 1, 8bytes per */
           u_char req_sense_length;
           u_char scsi_cmd_length;
           struct scsi_generic scsi_cmd;
           u_char host_stat;
           u_char target_stat;
           physaddr sense_ptr;     /* if 0 no auto sense */
   
           struct uha_dma_seg uha_dma[UHA_NSEG];
           struct scsipi_sense_data mscp_sense;
           /*-----------------end of hardware supported fields----------------*/
           TAILQ_ENTRY(uha_mscp) chain;
           struct uha_mscp *nexthash;
           u_long hashkey;
           struct scsipi_xfer *xs; /* the scsipi_xfer for this cmd */
           int flags;
   #define MSCP_ALLOC      0x01
   #define MSCP_ABORT      0x02
           int timeout;
   
           /*
            * This DMA map maps the buffer involved in the transfer.
            * It's contents are loaded into "uha_dma" above.
            */
           bus_dmamap_t    dmamap_xfer;
   
   };
   #pragma pack()

Cache object: 7ea040cd490640251ebb0985c5c9f058