FreeBSD/Linux Kernel Cross Reference
sys/dev/ic/z8530tty.c
1 /* $NetBSD: z8530tty.c,v 1.112 2006/10/01 20:31:50 elad Exp $ */
2
3 /*-
4 * Copyright (c) 1993, 1994, 1995, 1996, 1997, 1998, 1999
5 * Charles M. Hannum. All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. All advertising materials mentioning features or use of this software
16 * must display the following acknowledgement:
17 * This product includes software developed by Charles M. Hannum.
18 * 4. The name of the author may not be used to endorse or promote products
19 * derived from this software without specific prior written permission.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33 /*
34 * Copyright (c) 1992, 1993
35 * The Regents of the University of California. All rights reserved.
36 *
37 * This software was developed by the Computer Systems Engineering group
38 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
39 * contributed to Berkeley.
40 *
41 * All advertising materials mentioning features or use of this software
42 * must display the following acknowledgement:
43 * This product includes software developed by the University of
44 * California, Lawrence Berkeley Laboratory.
45 *
46 * Redistribution and use in source and binary forms, with or without
47 * modification, are permitted provided that the following conditions
48 * are met:
49 * 1. Redistributions of source code must retain the above copyright
50 * notice, this list of conditions and the following disclaimer.
51 * 2. Redistributions in binary form must reproduce the above copyright
52 * notice, this list of conditions and the following disclaimer in the
53 * documentation and/or other materials provided with the distribution.
54 * 3. Neither the name of the University nor the names of its contributors
55 * may be used to endorse or promote products derived from this software
56 * without specific prior written permission.
57 *
58 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
59 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
60 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
61 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
62 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
63 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
64 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
65 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
66 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
67 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
68 * SUCH DAMAGE.
69 *
70 * @(#)zs.c 8.1 (Berkeley) 7/19/93
71 */
72
73 /*
74 * Copyright (c) 1994 Gordon W. Ross
75 *
76 * This software was developed by the Computer Systems Engineering group
77 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
78 * contributed to Berkeley.
79 *
80 * All advertising materials mentioning features or use of this software
81 * must display the following acknowledgement:
82 * This product includes software developed by the University of
83 * California, Lawrence Berkeley Laboratory.
84 *
85 * Redistribution and use in source and binary forms, with or without
86 * modification, are permitted provided that the following conditions
87 * are met:
88 * 1. Redistributions of source code must retain the above copyright
89 * notice, this list of conditions and the following disclaimer.
90 * 2. Redistributions in binary form must reproduce the above copyright
91 * notice, this list of conditions and the following disclaimer in the
92 * documentation and/or other materials provided with the distribution.
93 * 3. All advertising materials mentioning features or use of this software
94 * must display the following acknowledgement:
95 * This product includes software developed by the University of
96 * California, Berkeley and its contributors.
97 * 4. Neither the name of the University nor the names of its contributors
98 * may be used to endorse or promote products derived from this software
99 * without specific prior written permission.
100 *
101 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
102 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
103 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
104 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
105 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
106 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
107 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
108 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
109 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
110 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
111 * SUCH DAMAGE.
112 *
113 * @(#)zs.c 8.1 (Berkeley) 7/19/93
114 */
115
116 /*
117 * Zilog Z8530 Dual UART driver (tty interface)
118 *
119 * This is the "slave" driver that will be attached to
120 * the "zsc" driver for plain "tty" async. serial lines.
121 *
122 * Credits, history:
123 *
124 * The original version of this code was the sparc/dev/zs.c driver
125 * as distributed with the Berkeley 4.4 Lite release. Since then,
126 * Gordon Ross reorganized the code into the current parent/child
127 * driver scheme, separating the Sun keyboard and mouse support
128 * into independent child drivers.
129 *
130 * RTS/CTS flow-control support was a collaboration of:
131 * Gordon Ross <gwr@NetBSD.org>,
132 * Bill Studenmund <wrstuden@loki.stanford.edu>
133 * Ian Dall <Ian.Dall@dsto.defence.gov.au>
134 *
135 * The driver was massively overhauled in November 1997 by Charles Hannum,
136 * fixing *many* bugs, and substantially improving performance.
137 */
138
139 #include <sys/cdefs.h>
140 __KERNEL_RCSID(0, "$NetBSD: z8530tty.c,v 1.112 2006/10/01 20:31:50 elad Exp $");
141
142 #include "opt_kgdb.h"
143 #include "opt_ntp.h"
144
145 #include <sys/param.h>
146 #include <sys/systm.h>
147 #include <sys/proc.h>
148 #include <sys/device.h>
149 #include <sys/conf.h>
150 #include <sys/file.h>
151 #include <sys/ioctl.h>
152 #include <sys/malloc.h>
153 #include <sys/timepps.h>
154 #include <sys/tty.h>
155 #include <sys/time.h>
156 #include <sys/kernel.h>
157 #include <sys/syslog.h>
158 #include <sys/kauth.h>
159
160 #include <dev/ic/z8530reg.h>
161 #include <machine/z8530var.h>
162
163 #include <dev/cons.h>
164
165 #include "locators.h"
166
167 /*
168 * How many input characters we can buffer.
169 * The port-specific var.h may override this.
170 * Note: must be a power of two!
171 */
172 #ifndef ZSTTY_RING_SIZE
173 #define ZSTTY_RING_SIZE 2048
174 #endif
175
176 static struct cnm_state zstty_cnm_state;
177 /*
178 * Make this an option variable one can patch.
179 * But be warned: this must be a power of 2!
180 */
181 u_int zstty_rbuf_size = ZSTTY_RING_SIZE;
182
183 /* Stop input when 3/4 of the ring is full; restart when only 1/4 is full. */
184 u_int zstty_rbuf_hiwat = (ZSTTY_RING_SIZE * 1) / 4;
185 u_int zstty_rbuf_lowat = (ZSTTY_RING_SIZE * 3) / 4;
186
187 #ifndef __HAVE_TIMECOUNTER
188 static int zsppscap =
189 PPS_TSFMT_TSPEC |
190 PPS_CAPTUREASSERT |
191 PPS_CAPTURECLEAR |
192 PPS_OFFSETASSERT | PPS_OFFSETCLEAR;
193 #endif /* __HAVE_TIMECOUNTER */
194
195 struct zstty_softc {
196 struct device zst_dev; /* required first: base device */
197 struct tty *zst_tty;
198 struct zs_chanstate *zst_cs;
199
200 struct callout zst_diag_ch;
201
202 u_int zst_overflows,
203 zst_floods,
204 zst_errors;
205
206 int zst_hwflags, /* see z8530var.h */
207 zst_swflags; /* TIOCFLAG_SOFTCAR, ... <ttycom.h> */
208
209 u_int zst_r_hiwat,
210 zst_r_lowat;
211 u_char *volatile zst_rbget,
212 *volatile zst_rbput;
213 volatile u_int zst_rbavail;
214 u_char *zst_rbuf,
215 *zst_ebuf;
216
217 /*
218 * The transmit byte count and address are used for pseudo-DMA
219 * output in the hardware interrupt code. PDMA can be suspended
220 * to get pending changes done; heldtbc is used for this. It can
221 * also be stopped for ^S; this sets TS_TTSTOP in tp->t_state.
222 */
223 u_char *zst_tba; /* transmit buffer address */
224 u_int zst_tbc, /* transmit byte count */
225 zst_heldtbc; /* held tbc while xmission stopped */
226
227 /* Flags to communicate with zstty_softint() */
228 volatile u_char zst_rx_flags, /* receiver blocked */
229 #define RX_TTY_BLOCKED 0x01
230 #define RX_TTY_OVERFLOWED 0x02
231 #define RX_IBUF_BLOCKED 0x04
232 #define RX_IBUF_OVERFLOWED 0x08
233 #define RX_ANY_BLOCK 0x0f
234 zst_tx_busy, /* working on an output chunk */
235 zst_tx_done, /* done with one output chunk */
236 zst_tx_stopped, /* H/W level stop (lost CTS) */
237 zst_st_check, /* got a status interrupt */
238 zst_rx_ready;
239
240 /* PPS signal on DCD, with or without inkernel clock disciplining */
241 u_char zst_ppsmask; /* pps signal mask */
242 #ifdef __HAVE_TIMECOUNTER
243 struct pps_state zst_pps_state;
244 #else /* !__HAVE_TIMECOUNTER */
245 u_char zst_ppsassert; /* pps leading edge */
246 u_char zst_ppsclear; /* pps trailing edge */
247 pps_info_t ppsinfo;
248 pps_params_t ppsparam;
249 #endif /* !__HAVE_TIMECOUNTER */
250 };
251
252 /* Definition of the driver for autoconfig. */
253 static int zstty_match(struct device *, struct cfdata *, void *);
254 static void zstty_attach(struct device *, struct device *, void *);
255
256 CFATTACH_DECL(zstty, sizeof(struct zstty_softc),
257 zstty_match, zstty_attach, NULL, NULL);
258
259 extern struct cfdriver zstty_cd;
260
261 dev_type_open(zsopen);
262 dev_type_close(zsclose);
263 dev_type_read(zsread);
264 dev_type_write(zswrite);
265 dev_type_ioctl(zsioctl);
266 dev_type_stop(zsstop);
267 dev_type_tty(zstty);
268 dev_type_poll(zspoll);
269
270 const struct cdevsw zstty_cdevsw = {
271 zsopen, zsclose, zsread, zswrite, zsioctl,
272 zsstop, zstty, zspoll, nommap, ttykqfilter, D_TTY
273 };
274
275 struct zsops zsops_tty;
276
277 static void zs_shutdown(struct zstty_softc *);
278 static void zsstart(struct tty *);
279 static int zsparam(struct tty *, struct termios *);
280 static void zs_modem(struct zstty_softc *, int);
281 static void tiocm_to_zs(struct zstty_softc *, u_long, int);
282 static int zs_to_tiocm(struct zstty_softc *);
283 static int zshwiflow(struct tty *, int);
284 static void zs_hwiflow(struct zstty_softc *);
285 static void zs_maskintr(struct zstty_softc *);
286
287 /* Low-level routines. */
288 static void zstty_rxint (struct zs_chanstate *);
289 static void zstty_stint (struct zs_chanstate *, int);
290 static void zstty_txint (struct zs_chanstate *);
291 static void zstty_softint(struct zs_chanstate *);
292
293 #define ZSUNIT(x) (minor(x) & 0x7ffff)
294 #define ZSDIALOUT(x) (minor(x) & 0x80000)
295
296 struct tty *zstty_get_tty_from_dev(struct device *);
297
298 /*
299 * XXX get the (struct tty *) out of a (struct device *) we trust to be a
300 * (struct zstty_softc *) - needed by sparc/dev/zs.c, sparc64/dev/zs.c,
301 * sun3/dev/zs.c and sun2/dev/zs.c will probably need it at some point
302 */
303
304 struct tty *
305 zstty_get_tty_from_dev(struct device *dev)
306 {
307 struct zstty_softc *sc = (struct zstty_softc *)dev;
308
309 return sc->zst_tty;
310 }
311
312 /*
313 * zstty_match: how is this zs channel configured?
314 */
315 int
316 zstty_match(parent, cf, aux)
317 struct device *parent;
318 struct cfdata *cf;
319 void *aux;
320 {
321 struct zsc_attach_args *args = aux;
322
323 /* Exact match is better than wildcard. */
324 if (cf->zsccf_channel == args->channel)
325 return 2;
326
327 /* This driver accepts wildcard. */
328 if (cf->zsccf_channel == ZSCCF_CHANNEL_DEFAULT)
329 return 1;
330
331 return 0;
332 }
333
334 void
335 zstty_attach(parent, self, aux)
336 struct device *parent, *self;
337 void *aux;
338
339 {
340 struct zsc_softc *zsc = (void *) parent;
341 struct zstty_softc *zst = (void *) self;
342 struct cfdata *cf = device_cfdata(self);
343 struct zsc_attach_args *args = aux;
344 struct zs_chanstate *cs;
345 struct tty *tp;
346 int channel, s, tty_unit;
347 dev_t dev;
348 const char *i, *o;
349 int dtr_on;
350 int resetbit;
351
352 callout_init(&zst->zst_diag_ch);
353 cn_init_magic(&zstty_cnm_state);
354
355 tty_unit = device_unit(&zst->zst_dev);
356 channel = args->channel;
357 cs = zsc->zsc_cs[channel];
358 cs->cs_private = zst;
359 cs->cs_ops = &zsops_tty;
360
361 zst->zst_cs = cs;
362 zst->zst_swflags = cf->cf_flags; /* softcar, etc. */
363 zst->zst_hwflags = args->hwflags;
364 dev = makedev(cdevsw_lookup_major(&zstty_cdevsw), tty_unit);
365
366 if (zst->zst_swflags)
367 printf(" flags 0x%x", zst->zst_swflags);
368
369 /*
370 * Check whether we serve as a console device.
371 * XXX - split console input/output channels aren't
372 * supported yet on /dev/console
373 */
374 i = o = NULL;
375 if ((zst->zst_hwflags & ZS_HWFLAG_CONSOLE_INPUT) != 0) {
376 i = "input";
377 if ((args->hwflags & ZS_HWFLAG_USE_CONSDEV) != 0) {
378 args->consdev->cn_dev = dev;
379 cn_tab->cn_pollc = args->consdev->cn_pollc;
380 cn_tab->cn_getc = args->consdev->cn_getc;
381 }
382 cn_tab->cn_dev = dev;
383 /* Set console magic to BREAK */
384 cn_set_magic("\047\001");
385 }
386 if ((zst->zst_hwflags & ZS_HWFLAG_CONSOLE_OUTPUT) != 0) {
387 o = "output";
388 if ((args->hwflags & ZS_HWFLAG_USE_CONSDEV) != 0) {
389 cn_tab->cn_putc = args->consdev->cn_putc;
390 }
391 cn_tab->cn_dev = dev;
392 }
393 if (i != NULL || o != NULL)
394 printf(" (console %s)", i ? (o ? "i/o" : i) : o);
395
396 #ifdef KGDB
397 if (zs_check_kgdb(cs, dev)) {
398 /*
399 * Allow kgdb to "take over" this port. Returns true
400 * if this serial port is in-use by kgdb.
401 */
402 printf(" (kgdb)\n");
403 /*
404 * This is the kgdb port (exclusive use)
405 * so skip the normal attach code.
406 */
407 return;
408 }
409 #endif
410 printf("\n");
411
412 tp = ttymalloc();
413 tp->t_dev = dev;
414 tp->t_oproc = zsstart;
415 tp->t_param = zsparam;
416 tp->t_hwiflow = zshwiflow;
417 tty_attach(tp);
418
419 zst->zst_tty = tp;
420 zst->zst_rbuf = malloc(zstty_rbuf_size << 1, M_DEVBUF, M_NOWAIT);
421 if (zst->zst_rbuf == NULL) {
422 aprint_error("%s: unable to allocate ring buffer\n",
423 zst->zst_dev.dv_xname);
424 return;
425 }
426 zst->zst_ebuf = zst->zst_rbuf + (zstty_rbuf_size << 1);
427 /* Disable the high water mark. */
428 zst->zst_r_hiwat = 0;
429 zst->zst_r_lowat = 0;
430 zst->zst_rbget = zst->zst_rbput = zst->zst_rbuf;
431 zst->zst_rbavail = zstty_rbuf_size;
432
433 /* if there are no enable/disable functions, assume the device
434 is always enabled */
435 if (!cs->enable)
436 cs->enabled = 1;
437
438 /*
439 * Hardware init
440 */
441 dtr_on = 0;
442 resetbit = 0;
443 if (ISSET(zst->zst_hwflags, ZS_HWFLAG_CONSOLE)) {
444 /* Call zsparam similar to open. */
445 struct termios t;
446
447 /* Wait a while for previous console output to complete */
448 DELAY(10000);
449
450 /* Setup the "new" parameters in t. */
451 t.c_ispeed = 0;
452 t.c_ospeed = cs->cs_defspeed;
453 t.c_cflag = cs->cs_defcflag;
454
455 /*
456 * Turn on receiver and status interrupts.
457 * We defer the actual write of the register to zsparam(),
458 * but we must make sure status interrupts are turned on by
459 * the time zsparam() reads the initial rr0 state.
460 */
461 SET(cs->cs_preg[1], ZSWR1_RIE | ZSWR1_SIE);
462
463 /* Make sure zsparam will see changes. */
464 tp->t_ospeed = 0;
465 (void) zsparam(tp, &t);
466
467 /* Make sure DTR is on now. */
468 dtr_on = 1;
469
470 } else if (!ISSET(zst->zst_hwflags, ZS_HWFLAG_NORESET)) {
471 /* Not the console; may need reset. */
472 resetbit = (channel == 0) ? ZSWR9_A_RESET : ZSWR9_B_RESET;
473 }
474
475 s = splzs();
476 simple_lock(&cs->cs_lock);
477 if (resetbit)
478 zs_write_reg(cs, 9, resetbit);
479 zs_modem(zst, dtr_on);
480 simple_unlock(&cs->cs_lock);
481 splx(s);
482 }
483
484
485 /*
486 * Return pointer to our tty.
487 */
488 struct tty *
489 zstty(dev)
490 dev_t dev;
491 {
492 struct zstty_softc *zst = device_lookup(&zstty_cd, ZSUNIT(dev));
493
494 return (zst->zst_tty);
495 }
496
497
498 void
499 zs_shutdown(zst)
500 struct zstty_softc *zst;
501 {
502 struct zs_chanstate *cs = zst->zst_cs;
503 struct tty *tp = zst->zst_tty;
504 int s;
505
506 s = splzs();
507 simple_lock(&cs->cs_lock);
508
509 /* If we were asserting flow control, then deassert it. */
510 SET(zst->zst_rx_flags, RX_IBUF_BLOCKED);
511 zs_hwiflow(zst);
512
513 /* Clear any break condition set with TIOCSBRK. */
514 zs_break(cs, 0);
515
516 #ifndef __HAVE_TIMECOUNTER
517 /* Turn off PPS capture on last close. */
518 zst->zst_ppsmask = 0;
519 zst->ppsparam.mode = 0;
520 #endif /* __HAVE_TIMECOUNTER */
521
522 /*
523 * Hang up if necessary. Wait a bit, so the other side has time to
524 * notice even if we immediately open the port again.
525 */
526 if (ISSET(tp->t_cflag, HUPCL)) {
527 zs_modem(zst, 0);
528 simple_unlock(&cs->cs_lock);
529 splx(s);
530 /*
531 * XXX - another process is not prevented from opening
532 * the device during our sleep.
533 */
534 (void) tsleep(cs, TTIPRI, ttclos, hz);
535 /* Re-check state in case we were opened during our sleep */
536 if (ISSET(tp->t_state, TS_ISOPEN) || tp->t_wopen != 0)
537 return;
538
539 s = splzs();
540 simple_lock(&cs->cs_lock);
541 }
542
543 /* Turn off interrupts if not the console. */
544 if (!ISSET(zst->zst_hwflags, ZS_HWFLAG_CONSOLE)) {
545 CLR(cs->cs_preg[1], ZSWR1_RIE | ZSWR1_SIE);
546 cs->cs_creg[1] = cs->cs_preg[1];
547 zs_write_reg(cs, 1, cs->cs_creg[1]);
548 }
549
550 /* Call the power management hook. */
551 if (cs->disable) {
552 #ifdef DIAGNOSTIC
553 if (!cs->enabled)
554 panic("zs_shutdown: not enabled?");
555 #endif
556 (*cs->disable)(zst->zst_cs);
557 }
558
559 simple_unlock(&cs->cs_lock);
560 splx(s);
561 }
562
563 /*
564 * Open a zs serial (tty) port.
565 */
566 int
567 zsopen(dev, flags, mode, l)
568 dev_t dev;
569 int flags;
570 int mode;
571 struct lwp *l;
572 {
573 struct zstty_softc *zst;
574 struct zs_chanstate *cs;
575 struct tty *tp;
576 int s, s2;
577 int error;
578
579 zst = device_lookup(&zstty_cd, ZSUNIT(dev));
580 if (zst == NULL)
581 return (ENXIO);
582
583 tp = zst->zst_tty;
584 cs = zst->zst_cs;
585
586 /* If KGDB took the line, then tp==NULL */
587 if (tp == NULL)
588 return (EBUSY);
589
590 if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp))
591 return (EBUSY);
592
593 s = spltty();
594
595 /*
596 * Do the following iff this is a first open.
597 */
598 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
599 struct termios t;
600
601 tp->t_dev = dev;
602
603 /* Call the power management hook. */
604 if (cs->enable) {
605 if ((*cs->enable)(cs)) {
606 splx(s);
607 printf("%s: device enable failed\n",
608 zst->zst_dev.dv_xname);
609 return (EIO);
610 }
611 }
612
613 /*
614 * Initialize the termios status to the defaults. Add in the
615 * sticky bits from TIOCSFLAGS.
616 */
617 t.c_ispeed = 0;
618 t.c_ospeed = cs->cs_defspeed;
619 t.c_cflag = cs->cs_defcflag;
620 if (ISSET(zst->zst_swflags, TIOCFLAG_CLOCAL))
621 SET(t.c_cflag, CLOCAL);
622 if (ISSET(zst->zst_swflags, TIOCFLAG_CRTSCTS))
623 SET(t.c_cflag, CRTSCTS);
624 if (ISSET(zst->zst_swflags, TIOCFLAG_CDTRCTS))
625 SET(t.c_cflag, CDTRCTS);
626 if (ISSET(zst->zst_swflags, TIOCFLAG_MDMBUF))
627 SET(t.c_cflag, MDMBUF);
628
629 s2 = splzs();
630 simple_lock(&cs->cs_lock);
631
632 /*
633 * Turn on receiver and status interrupts.
634 * We defer the actual write of the register to zsparam(),
635 * but we must make sure status interrupts are turned on by
636 * the time zsparam() reads the initial rr0 state.
637 */
638 SET(cs->cs_preg[1], ZSWR1_RIE | ZSWR1_SIE);
639
640 /* Clear PPS capture state on first open. */
641 zst->zst_ppsmask = 0;
642 #ifdef __HAVE_TIMECOUNTER
643 memset(&zst->zst_pps_state, 0, sizeof(zst->zst_pps_state));
644 zst->zst_pps_state.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR;
645 pps_init(&zst->zst_pps_state);
646 #else /* !__HAVE_TIMECOUNTER */
647 zst->ppsparam.mode = 0;
648 #endif /* !__HAVE_TIMECOUNTER */
649
650 simple_unlock(&cs->cs_lock);
651 splx(s2);
652
653 /* Make sure zsparam will see changes. */
654 tp->t_ospeed = 0;
655 (void) zsparam(tp, &t);
656
657 /*
658 * Note: zsparam has done: cflag, ispeed, ospeed
659 * so we just need to do: iflag, oflag, lflag, cc
660 * For "raw" mode, just leave all zeros.
661 */
662 if (!ISSET(zst->zst_hwflags, ZS_HWFLAG_RAW)) {
663 tp->t_iflag = TTYDEF_IFLAG;
664 tp->t_oflag = TTYDEF_OFLAG;
665 tp->t_lflag = TTYDEF_LFLAG;
666 } else {
667 tp->t_iflag = 0;
668 tp->t_oflag = 0;
669 tp->t_lflag = 0;
670 }
671 ttychars(tp);
672 ttsetwater(tp);
673
674 s2 = splzs();
675 simple_lock(&cs->cs_lock);
676
677 /*
678 * Turn on DTR. We must always do this, even if carrier is not
679 * present, because otherwise we'd have to use TIOCSDTR
680 * immediately after setting CLOCAL, which applications do not
681 * expect. We always assert DTR while the device is open
682 * unless explicitly requested to deassert it.
683 */
684 zs_modem(zst, 1);
685
686 /* Clear the input ring, and unblock. */
687 zst->zst_rbget = zst->zst_rbput = zst->zst_rbuf;
688 zst->zst_rbavail = zstty_rbuf_size;
689 zs_iflush(cs);
690 CLR(zst->zst_rx_flags, RX_ANY_BLOCK);
691 zs_hwiflow(zst);
692
693 simple_unlock(&cs->cs_lock);
694 splx(s2);
695 }
696
697 splx(s);
698
699 error = ttyopen(tp, ZSDIALOUT(dev), ISSET(flags, O_NONBLOCK));
700 if (error)
701 goto bad;
702
703 error = (*tp->t_linesw->l_open)(dev, tp);
704 if (error)
705 goto bad;
706
707 return (0);
708
709 bad:
710 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
711 /*
712 * We failed to open the device, and nobody else had it opened.
713 * Clean up the state as appropriate.
714 */
715 zs_shutdown(zst);
716 }
717
718 return (error);
719 }
720
721 /*
722 * Close a zs serial port.
723 */
724 int
725 zsclose(dev, flags, mode, l)
726 dev_t dev;
727 int flags;
728 int mode;
729 struct lwp *l;
730 {
731 struct zstty_softc *zst = device_lookup(&zstty_cd, ZSUNIT(dev));
732 struct tty *tp = zst->zst_tty;
733
734 /* XXX This is for cons.c. */
735 if (!ISSET(tp->t_state, TS_ISOPEN))
736 return 0;
737
738 (*tp->t_linesw->l_close)(tp, flags);
739 ttyclose(tp);
740
741 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
742 /*
743 * Although we got a last close, the device may still be in
744 * use; e.g. if this was the dialout node, and there are still
745 * processes waiting for carrier on the non-dialout node.
746 */
747 zs_shutdown(zst);
748 }
749
750 return (0);
751 }
752
753 /*
754 * Read/write zs serial port.
755 */
756 int
757 zsread(dev, uio, flags)
758 dev_t dev;
759 struct uio *uio;
760 int flags;
761 {
762 struct zstty_softc *zst = device_lookup(&zstty_cd, ZSUNIT(dev));
763 struct tty *tp = zst->zst_tty;
764
765 return ((*tp->t_linesw->l_read)(tp, uio, flags));
766 }
767
768 int
769 zswrite(dev, uio, flags)
770 dev_t dev;
771 struct uio *uio;
772 int flags;
773 {
774 struct zstty_softc *zst = device_lookup(&zstty_cd, ZSUNIT(dev));
775 struct tty *tp = zst->zst_tty;
776
777 return ((*tp->t_linesw->l_write)(tp, uio, flags));
778 }
779
780 int
781 zspoll(dev, events, l)
782 dev_t dev;
783 int events;
784 struct lwp *l;
785 {
786 struct zstty_softc *zst = device_lookup(&zstty_cd, ZSUNIT(dev));
787 struct tty *tp = zst->zst_tty;
788
789 return ((*tp->t_linesw->l_poll)(tp, events, l));
790 }
791
792 int
793 zsioctl(dev, cmd, data, flag, l)
794 dev_t dev;
795 u_long cmd;
796 caddr_t data;
797 int flag;
798 struct lwp *l;
799 {
800 struct zstty_softc *zst = device_lookup(&zstty_cd, ZSUNIT(dev));
801 struct zs_chanstate *cs = zst->zst_cs;
802 struct tty *tp = zst->zst_tty;
803 int error;
804 int s;
805
806 error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l);
807 if (error != EPASSTHROUGH)
808 return (error);
809
810 error = ttioctl(tp, cmd, data, flag, l);
811 if (error != EPASSTHROUGH)
812 return (error);
813
814 #ifdef ZS_MD_IOCTL
815 error = ZS_MD_IOCTL(cs, cmd, data);
816 if (error != EPASSTHROUGH)
817 return (error);
818 #endif /* ZS_MD_IOCTL */
819
820 error = 0;
821
822 s = splzs();
823 simple_lock(&cs->cs_lock);
824
825 switch (cmd) {
826 case TIOCSBRK:
827 zs_break(cs, 1);
828 break;
829
830 case TIOCCBRK:
831 zs_break(cs, 0);
832 break;
833
834 case TIOCGFLAGS:
835 *(int *)data = zst->zst_swflags;
836 break;
837
838 case TIOCSFLAGS:
839 error = kauth_authorize_device_tty(l->l_cred,
840 KAUTH_DEVICE_TTY_PRIVSET, tp);
841 if (error)
842 break;
843 zst->zst_swflags = *(int *)data;
844 break;
845
846 case TIOCSDTR:
847 zs_modem(zst, 1);
848 break;
849
850 case TIOCCDTR:
851 zs_modem(zst, 0);
852 break;
853
854 case TIOCMSET:
855 case TIOCMBIS:
856 case TIOCMBIC:
857 tiocm_to_zs(zst, cmd, *(int *)data);
858 break;
859
860 case TIOCMGET:
861 *(int *)data = zs_to_tiocm(zst);
862 break;
863
864 #ifdef __HAVE_TIMECOUNTER
865 case PPS_IOC_CREATE:
866 case PPS_IOC_DESTROY:
867 case PPS_IOC_GETPARAMS:
868 case PPS_IOC_SETPARAMS:
869 case PPS_IOC_GETCAP:
870 case PPS_IOC_FETCH:
871 #ifdef PPS_SYNC
872 case PPS_IOC_KCBIND:
873 #endif
874 error = pps_ioctl(cmd, data, &zst->zst_pps_state);
875 if (zst->zst_pps_state.ppsparam.mode & PPS_CAPTUREBOTH)
876 zst->zst_ppsmask = ZSRR0_DCD;
877 else
878 zst->zst_ppsmask = 0;
879 break;
880 #else /* !__HAVE_TIMECOUNTER */
881 case PPS_IOC_CREATE:
882 break;
883
884 case PPS_IOC_DESTROY:
885 break;
886
887 case PPS_IOC_GETPARAMS: {
888 pps_params_t *pp;
889 pp = (pps_params_t *)data;
890 *pp = zst->ppsparam;
891 break;
892 }
893
894 case PPS_IOC_SETPARAMS: {
895 pps_params_t *pp;
896 int mode;
897 if (cs->cs_rr0_pps == 0) {
898 error = EINVAL;
899 break;
900 }
901 pp = (pps_params_t *)data;
902 if (pp->mode & ~zsppscap) {
903 error = EINVAL;
904 break;
905 }
906 zst->ppsparam = *pp;
907 /*
908 * compute masks from user-specified timestamp state.
909 */
910 mode = zst->ppsparam.mode;
911 switch (mode & PPS_CAPTUREBOTH) {
912 case 0:
913 zst->zst_ppsmask = 0;
914 break;
915
916 case PPS_CAPTUREASSERT:
917 zst->zst_ppsmask = ZSRR0_DCD;
918 zst->zst_ppsassert = ZSRR0_DCD;
919 zst->zst_ppsclear = -1;
920 break;
921
922 case PPS_CAPTURECLEAR:
923 zst->zst_ppsmask = ZSRR0_DCD;
924 zst->zst_ppsassert = -1;
925 zst->zst_ppsclear = 0;
926 break;
927
928 case PPS_CAPTUREBOTH:
929 zst->zst_ppsmask = ZSRR0_DCD;
930 zst->zst_ppsassert = ZSRR0_DCD;
931 zst->zst_ppsclear = 0;
932 break;
933
934 default:
935 error = EINVAL;
936 break;
937 }
938
939 /*
940 * Now update interrupts.
941 */
942 zs_maskintr(zst);
943 /*
944 * If nothing is being transmitted, set up new current values,
945 * else mark them as pending.
946 */
947 if (!cs->cs_heldchange) {
948 if (zst->zst_tx_busy) {
949 zst->zst_heldtbc = zst->zst_tbc;
950 zst->zst_tbc = 0;
951 cs->cs_heldchange = 1;
952 } else
953 zs_loadchannelregs(cs);
954 }
955
956 break;
957 }
958
959 case PPS_IOC_GETCAP:
960 *(int *)data = zsppscap;
961 break;
962
963 case PPS_IOC_FETCH: {
964 pps_info_t *pi;
965 pi = (pps_info_t *)data;
966 *pi = zst->ppsinfo;
967 break;
968 }
969
970 #ifdef PPS_SYNC
971 case PPS_IOC_KCBIND: {
972 int edge = (*(int *)data) & PPS_CAPTUREBOTH;
973
974 if (edge == 0) {
975 /*
976 * remove binding for this source; ignore
977 * the request if this is not the current
978 * hardpps source
979 */
980 if (pps_kc_hardpps_source == zst) {
981 pps_kc_hardpps_source = NULL;
982 pps_kc_hardpps_mode = 0;
983 }
984 } else {
985 /*
986 * bind hardpps to this source, replacing any
987 * previously specified source or edges
988 */
989 pps_kc_hardpps_source = zst;
990 pps_kc_hardpps_mode = edge;
991 }
992 break;
993 }
994 #endif /* PPS_SYNC */
995 #endif /* !__HAVE_TIMECOUNTER */
996
997 case TIOCDCDTIMESTAMP: /* XXX old, overloaded API used by xntpd v3 */
998 if (cs->cs_rr0_pps == 0) {
999 error = EINVAL;
1000 break;
1001 }
1002 #ifdef __HAVE_TIMECOUNTER
1003 #ifndef PPS_TRAILING_EDGE
1004 TIMESPEC_TO_TIMEVAL((struct timeval *)data,
1005 &zst->zst_pps_state.ppsinfo.assert_timestamp);
1006 #else
1007 TIMESPEC_TO_TIMEVAL((struct timeval *)data,
1008 &zst->zst_pps_state.ppsinfo.clear_timestamp);
1009 #endif
1010 #else /* !__HAVE_TIMECOUNTER */
1011 zst->zst_ppsmask = ZSRR0_DCD;
1012 #ifndef PPS_TRAILING_EDGE
1013 zst->zst_ppsassert = ZSRR0_DCD;
1014 zst->zst_ppsclear = -1;
1015 TIMESPEC_TO_TIMEVAL((struct timeval *)data,
1016 &zst->ppsinfo.assert_timestamp);
1017 #else
1018 zst->zst_ppsassert = -1;
1019 zst->zst_ppsclear = 01;
1020 TIMESPEC_TO_TIMEVAL((struct timeval *)data,
1021 &zst->ppsinfo.clear_timestamp);
1022 #endif
1023 #endif /* !__HAVE_TIMECOUNTER */
1024 /*
1025 * Now update interrupts.
1026 */
1027 zs_maskintr(zst);
1028 /*
1029 * If nothing is being transmitted, set up new current values,
1030 * else mark them as pending.
1031 */
1032 if (!cs->cs_heldchange) {
1033 if (zst->zst_tx_busy) {
1034 zst->zst_heldtbc = zst->zst_tbc;
1035 zst->zst_tbc = 0;
1036 cs->cs_heldchange = 1;
1037 } else
1038 zs_loadchannelregs(cs);
1039 }
1040
1041 break;
1042
1043 default:
1044 error = EPASSTHROUGH;
1045 break;
1046 }
1047
1048 simple_unlock(&cs->cs_lock);
1049 splx(s);
1050
1051 return (error);
1052 }
1053
1054 /*
1055 * Start or restart transmission.
1056 */
1057 static void
1058 zsstart(tp)
1059 struct tty *tp;
1060 {
1061 struct zstty_softc *zst = device_lookup(&zstty_cd, ZSUNIT(tp->t_dev));
1062 struct zs_chanstate *cs = zst->zst_cs;
1063 u_char *tba;
1064 int s, tbc;
1065
1066 s = spltty();
1067 if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP))
1068 goto out;
1069 if (zst->zst_tx_stopped)
1070 goto out;
1071
1072 if (tp->t_outq.c_cc <= tp->t_lowat) {
1073 if (ISSET(tp->t_state, TS_ASLEEP)) {
1074 CLR(tp->t_state, TS_ASLEEP);
1075 wakeup((caddr_t)&tp->t_outq);
1076 }
1077 selwakeup(&tp->t_wsel);
1078 if (tp->t_outq.c_cc == 0)
1079 goto out;
1080 }
1081
1082 /* Grab the first contiguous region of buffer space. */
1083 tba = tp->t_outq.c_cf;
1084 tbc = ndqb(&tp->t_outq, 0);
1085
1086 (void) splzs();
1087 simple_lock(&cs->cs_lock);
1088
1089 zst->zst_tba = tba;
1090 zst->zst_tbc = tbc;
1091 SET(tp->t_state, TS_BUSY);
1092 zst->zst_tx_busy = 1;
1093
1094 #ifdef ZS_TXDMA
1095 if (zst->zst_tbc > 1) {
1096 zs_dma_setup(cs, zst->zst_tba, zst->zst_tbc);
1097 goto out;
1098 }
1099 #endif
1100
1101 /* Enable transmit completion interrupts if necessary. */
1102 if (!ISSET(cs->cs_preg[1], ZSWR1_TIE)) {
1103 SET(cs->cs_preg[1], ZSWR1_TIE);
1104 cs->cs_creg[1] = cs->cs_preg[1];
1105 zs_write_reg(cs, 1, cs->cs_creg[1]);
1106 }
1107
1108 /* Output the first character of the contiguous buffer. */
1109 zs_write_data(cs, *zst->zst_tba);
1110 zst->zst_tbc--;
1111 zst->zst_tba++;
1112
1113 simple_unlock(&cs->cs_lock);
1114 out:
1115 splx(s);
1116 return;
1117 }
1118
1119 /*
1120 * Stop output, e.g., for ^S or output flush.
1121 */
1122 void
1123 zsstop(tp, flag)
1124 struct tty *tp;
1125 int flag;
1126 {
1127 struct zstty_softc *zst = device_lookup(&zstty_cd, ZSUNIT(tp->t_dev));
1128 int s;
1129
1130 s = splzs();
1131 if (ISSET(tp->t_state, TS_BUSY)) {
1132 /* Stop transmitting at the next chunk. */
1133 zst->zst_tbc = 0;
1134 zst->zst_heldtbc = 0;
1135 if (!ISSET(tp->t_state, TS_TTSTOP))
1136 SET(tp->t_state, TS_FLUSH);
1137 }
1138 splx(s);
1139 }
1140
1141 /*
1142 * Set ZS tty parameters from termios.
1143 * XXX - Should just copy the whole termios after
1144 * making sure all the changes could be done.
1145 */
1146 static int
1147 zsparam(tp, t)
1148 struct tty *tp;
1149 struct termios *t;
1150 {
1151 struct zstty_softc *zst = device_lookup(&zstty_cd, ZSUNIT(tp->t_dev));
1152 struct zs_chanstate *cs = zst->zst_cs;
1153 int ospeed;
1154 tcflag_t cflag;
1155 u_char tmp3, tmp4, tmp5;
1156 int s, error;
1157
1158 ospeed = t->c_ospeed;
1159 cflag = t->c_cflag;
1160
1161 /* Check requested parameters. */
1162 if (ospeed < 0)
1163 return (EINVAL);
1164 if (t->c_ispeed && t->c_ispeed != ospeed)
1165 return (EINVAL);
1166
1167 /*
1168 * For the console, always force CLOCAL and !HUPCL, so that the port
1169 * is always active.
1170 */
1171 if (ISSET(zst->zst_swflags, TIOCFLAG_SOFTCAR) ||
1172 ISSET(zst->zst_hwflags, ZS_HWFLAG_CONSOLE)) {
1173 SET(cflag, CLOCAL);
1174 CLR(cflag, HUPCL);
1175 }
1176
1177 /*
1178 * Only whack the UART when params change.
1179 * Some callers need to clear tp->t_ospeed
1180 * to make sure initialization gets done.
1181 */
1182 if (tp->t_ospeed == ospeed &&
1183 tp->t_cflag == cflag)
1184 return (0);
1185
1186 /*
1187 * Call MD functions to deal with changed
1188 * clock modes or H/W flow control modes.
1189 * The BRG divisor is set now. (reg 12,13)
1190 */
1191 error = zs_set_speed(cs, ospeed);
1192 if (error)
1193 return (error);
1194 error = zs_set_modes(cs, cflag);
1195 if (error)
1196 return (error);
1197
1198 /*
1199 * Block interrupts so that state will not
1200 * be altered until we are done setting it up.
1201 *
1202 * Initial values in cs_preg are set before
1203 * our attach routine is called. The master
1204 * interrupt enable is handled by zsc.c
1205 *
1206 */
1207 s = splzs();
1208 simple_lock(&cs->cs_lock);
1209
1210 /*
1211 * Recalculate which status ints to enable.
1212 */
1213 zs_maskintr(zst);
1214
1215 /* Recompute character size bits. */
1216 tmp3 = cs->cs_preg[3];
1217 tmp5 = cs->cs_preg[5];
1218 CLR(tmp3, ZSWR3_RXSIZE);
1219 CLR(tmp5, ZSWR5_TXSIZE);
1220 switch (ISSET(cflag, CSIZE)) {
1221 case CS5:
1222 SET(tmp3, ZSWR3_RX_5);
1223 SET(tmp5, ZSWR5_TX_5);
1224 break;
1225 case CS6:
1226 SET(tmp3, ZSWR3_RX_6);
1227 SET(tmp5, ZSWR5_TX_6);
1228 break;
1229 case CS7:
1230 SET(tmp3, ZSWR3_RX_7);
1231 SET(tmp5, ZSWR5_TX_7);
1232 break;
1233 case CS8:
1234 SET(tmp3, ZSWR3_RX_8);
1235 SET(tmp5, ZSWR5_TX_8);
1236 break;
1237 }
1238 cs->cs_preg[3] = tmp3;
1239 cs->cs_preg[5] = tmp5;
1240
1241 /*
1242 * Recompute the stop bits and parity bits. Note that
1243 * zs_set_speed() may have set clock selection bits etc.
1244 * in wr4, so those must preserved.
1245 */
1246 tmp4 = cs->cs_preg[4];
1247 CLR(tmp4, ZSWR4_SBMASK | ZSWR4_PARMASK);
1248 if (ISSET(cflag, CSTOPB))
1249 SET(tmp4, ZSWR4_TWOSB);
1250 else
1251 SET(tmp4, ZSWR4_ONESB);
1252 if (!ISSET(cflag, PARODD))
1253 SET(tmp4, ZSWR4_EVENP);
1254 if (ISSET(cflag, PARENB))
1255 SET(tmp4, ZSWR4_PARENB);
1256 cs->cs_preg[4] = tmp4;
1257
1258 /* And copy to tty. */
1259 tp->t_ispeed = 0;
1260 tp->t_ospeed = ospeed;
1261 tp->t_cflag = cflag;
1262
1263 /*
1264 * If nothing is being transmitted, set up new current values,
1265 * else mark them as pending.
1266 */
1267 if (!cs->cs_heldchange) {
1268 if (zst->zst_tx_busy) {
1269 zst->zst_heldtbc = zst->zst_tbc;
1270 zst->zst_tbc = 0;
1271 cs->cs_heldchange = 1;
1272 } else
1273 zs_loadchannelregs(cs);
1274 }
1275
1276 /*
1277 * If hardware flow control is disabled, turn off the buffer water
1278 * marks and unblock any soft flow control state. Otherwise, enable
1279 * the water marks.
1280 */
1281 if (!ISSET(cflag, CHWFLOW)) {
1282 zst->zst_r_hiwat = 0;
1283 zst->zst_r_lowat = 0;
1284 if (ISSET(zst->zst_rx_flags, RX_TTY_OVERFLOWED)) {
1285 CLR(zst->zst_rx_flags, RX_TTY_OVERFLOWED);
1286 zst->zst_rx_ready = 1;
1287 cs->cs_softreq = 1;
1288 }
1289 if (ISSET(zst->zst_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED)) {
1290 CLR(zst->zst_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED);
1291 zs_hwiflow(zst);
1292 }
1293 } else {
1294 zst->zst_r_hiwat = zstty_rbuf_hiwat;
1295 zst->zst_r_lowat = zstty_rbuf_lowat;
1296 }
1297
1298 /*
1299 * Force a recheck of the hardware carrier and flow control status,
1300 * since we may have changed which bits we're looking at.
1301 */
1302 zstty_stint(cs, 1);
1303
1304 simple_unlock(&cs->cs_lock);
1305 splx(s);
1306
1307 /*
1308 * If hardware flow control is disabled, unblock any hard flow control
1309 * state.
1310 */
1311 if (!ISSET(cflag, CHWFLOW)) {
1312 if (zst->zst_tx_stopped) {
1313 zst->zst_tx_stopped = 0;
1314 zsstart(tp);
1315 }
1316 }
1317
1318 zstty_softint(cs);
1319
1320 return (0);
1321 }
1322
1323 /*
1324 * Compute interrupt enable bits and set in the pending bits. Called both
1325 * in zsparam() and when PPS (pulse per second timing) state changes.
1326 * Must be called at splzs().
1327 */
1328 static void
1329 zs_maskintr(zst)
1330 struct zstty_softc *zst;
1331 {
1332 struct zs_chanstate *cs = zst->zst_cs;
1333 int tmp15;
1334
1335 cs->cs_rr0_mask = cs->cs_rr0_cts | cs->cs_rr0_dcd;
1336 if (zst->zst_ppsmask != 0)
1337 cs->cs_rr0_mask |= cs->cs_rr0_pps;
1338 tmp15 = cs->cs_preg[15];
1339 if (ISSET(cs->cs_rr0_mask, ZSRR0_DCD))
1340 SET(tmp15, ZSWR15_DCD_IE);
1341 else
1342 CLR(tmp15, ZSWR15_DCD_IE);
1343 if (ISSET(cs->cs_rr0_mask, ZSRR0_CTS))
1344 SET(tmp15, ZSWR15_CTS_IE);
1345 else
1346 CLR(tmp15, ZSWR15_CTS_IE);
1347 cs->cs_preg[15] = tmp15;
1348 }
1349
1350
1351 /*
1352 * Raise or lower modem control (DTR/RTS) signals. If a character is
1353 * in transmission, the change is deferred.
1354 * Called at splzs() and with the channel lock held.
1355 */
1356 static void
1357 zs_modem(zst, onoff)
1358 struct zstty_softc *zst;
1359 int onoff;
1360 {
1361 struct zs_chanstate *cs = zst->zst_cs, *ccs;
1362
1363 if (cs->cs_wr5_dtr == 0)
1364 return;
1365
1366 ccs = (cs->cs_ctl_chan != NULL ? cs->cs_ctl_chan : cs);
1367
1368 if (onoff)
1369 SET(ccs->cs_preg[5], cs->cs_wr5_dtr);
1370 else
1371 CLR(ccs->cs_preg[5], cs->cs_wr5_dtr);
1372
1373 if (!cs->cs_heldchange) {
1374 if (zst->zst_tx_busy) {
1375 zst->zst_heldtbc = zst->zst_tbc;
1376 zst->zst_tbc = 0;
1377 cs->cs_heldchange = 1;
1378 } else
1379 zs_loadchannelregs(cs);
1380 }
1381 }
1382
1383 /*
1384 * Set modem bits.
1385 * Called at splzs() and with the channel lock held.
1386 */
1387 static void
1388 tiocm_to_zs(zst, how, ttybits)
1389 struct zstty_softc *zst;
1390 u_long how;
1391 int ttybits;
1392 {
1393 struct zs_chanstate *cs = zst->zst_cs, *ccs;
1394 u_char zsbits;
1395
1396 ccs = (cs->cs_ctl_chan != NULL ? cs->cs_ctl_chan : cs);
1397
1398 zsbits = 0;
1399 if (ISSET(ttybits, TIOCM_DTR))
1400 SET(zsbits, ZSWR5_DTR);
1401 if (ISSET(ttybits, TIOCM_RTS))
1402 SET(zsbits, ZSWR5_RTS);
1403
1404 switch (how) {
1405 case TIOCMBIC:
1406 CLR(ccs->cs_preg[5], zsbits);
1407 break;
1408
1409 case TIOCMBIS:
1410 SET(ccs->cs_preg[5], zsbits);
1411 break;
1412
1413 case TIOCMSET:
1414 CLR(ccs->cs_preg[5], ZSWR5_RTS | ZSWR5_DTR);
1415 SET(ccs->cs_preg[5], zsbits);
1416 break;
1417 }
1418
1419 if (!cs->cs_heldchange) {
1420 if (zst->zst_tx_busy) {
1421 zst->zst_heldtbc = zst->zst_tbc;
1422 zst->zst_tbc = 0;
1423 cs->cs_heldchange = 1;
1424 } else
1425 zs_loadchannelregs(cs);
1426 }
1427 }
1428
1429 /*
1430 * Get modem bits.
1431 * Called at splzs() and with the channel lock held.
1432 */
1433 static int
1434 zs_to_tiocm(zst)
1435 struct zstty_softc *zst;
1436 {
1437 struct zs_chanstate *cs = zst->zst_cs, *ccs;
1438 u_char zsbits;
1439 int ttybits = 0;
1440
1441 ccs = (cs->cs_ctl_chan != NULL ? cs->cs_ctl_chan : cs);
1442
1443 zsbits = ccs->cs_preg[5];
1444 if (ISSET(zsbits, ZSWR5_DTR))
1445 SET(ttybits, TIOCM_DTR);
1446 if (ISSET(zsbits, ZSWR5_RTS))
1447 SET(ttybits, TIOCM_RTS);
1448
1449 zsbits = cs->cs_rr0;
1450 if (ISSET(zsbits, ZSRR0_DCD))
1451 SET(ttybits, TIOCM_CD);
1452 if (ISSET(zsbits, ZSRR0_CTS))
1453 SET(ttybits, TIOCM_CTS);
1454
1455 return (ttybits);
1456 }
1457
1458 /*
1459 * Try to block or unblock input using hardware flow-control.
1460 * This is called by kern/tty.c if MDMBUF|CRTSCTS is set, and
1461 * if this function returns non-zero, the TS_TBLOCK flag will
1462 * be set or cleared according to the "block" arg passed.
1463 */
1464 int
1465 zshwiflow(tp, block)
1466 struct tty *tp;
1467 int block;
1468 {
1469 struct zstty_softc *zst = device_lookup(&zstty_cd, ZSUNIT(tp->t_dev));
1470 struct zs_chanstate *cs = zst->zst_cs;
1471 int s;
1472
1473 if (cs->cs_wr5_rts == 0)
1474 return (0);
1475
1476 s = splzs();
1477 simple_lock(&cs->cs_lock);
1478 if (block) {
1479 if (!ISSET(zst->zst_rx_flags, RX_TTY_BLOCKED)) {
1480 SET(zst->zst_rx_flags, RX_TTY_BLOCKED);
1481 zs_hwiflow(zst);
1482 }
1483 } else {
1484 if (ISSET(zst->zst_rx_flags, RX_TTY_OVERFLOWED)) {
1485 CLR(zst->zst_rx_flags, RX_TTY_OVERFLOWED);
1486 zst->zst_rx_ready = 1;
1487 cs->cs_softreq = 1;
1488 }
1489 if (ISSET(zst->zst_rx_flags, RX_TTY_BLOCKED)) {
1490 CLR(zst->zst_rx_flags, RX_TTY_BLOCKED);
1491 zs_hwiflow(zst);
1492 }
1493 }
1494 simple_unlock(&cs->cs_lock);
1495 splx(s);
1496 return (1);
1497 }
1498
1499 /*
1500 * Internal version of zshwiflow
1501 * Called at splzs() and with the channel lock held.
1502 */
1503 static void
1504 zs_hwiflow(zst)
1505 struct zstty_softc *zst;
1506 {
1507 struct zs_chanstate *cs = zst->zst_cs, *ccs;
1508
1509 if (cs->cs_wr5_rts == 0)
1510 return;
1511
1512 ccs = (cs->cs_ctl_chan != NULL ? cs->cs_ctl_chan : cs);
1513
1514 if (ISSET(zst->zst_rx_flags, RX_ANY_BLOCK)) {
1515 CLR(ccs->cs_preg[5], cs->cs_wr5_rts);
1516 CLR(ccs->cs_creg[5], cs->cs_wr5_rts);
1517 } else {
1518 SET(ccs->cs_preg[5], cs->cs_wr5_rts);
1519 SET(ccs->cs_creg[5], cs->cs_wr5_rts);
1520 }
1521 zs_write_reg(ccs, 5, ccs->cs_creg[5]);
1522 }
1523
1524
1525 /****************************************************************
1526 * Interface to the lower layer (zscc)
1527 ****************************************************************/
1528
1529 #define integrate static inline
1530 integrate void zstty_rxsoft(struct zstty_softc *, struct tty *);
1531 integrate void zstty_txsoft(struct zstty_softc *, struct tty *);
1532 integrate void zstty_stsoft(struct zstty_softc *, struct tty *);
1533 static void zstty_diag(void *);
1534
1535 /*
1536 * Receiver Ready interrupt.
1537 * Called at splzs() and with the channel lock held.
1538 */
1539 static void
1540 zstty_rxint(cs)
1541 struct zs_chanstate *cs;
1542 {
1543 struct zstty_softc *zst = cs->cs_private;
1544 u_char *put, *end;
1545 u_int cc;
1546 u_char rr0, rr1, c;
1547
1548 end = zst->zst_ebuf;
1549 put = zst->zst_rbput;
1550 cc = zst->zst_rbavail;
1551
1552 while (cc > 0) {
1553 /*
1554 * First read the status, because reading the received char
1555 * destroys the status of this char.
1556 */
1557 rr1 = zs_read_reg(cs, 1);
1558 c = zs_read_data(cs);
1559
1560 if (ISSET(rr1, ZSRR1_FE | ZSRR1_DO | ZSRR1_PE)) {
1561 /* Clear the receive error. */
1562 zs_write_csr(cs, ZSWR0_RESET_ERRORS);
1563 }
1564
1565 cn_check_magic(zst->zst_tty->t_dev, c, zstty_cnm_state);
1566 put[0] = c;
1567 put[1] = rr1;
1568 put += 2;
1569 if (put >= end)
1570 put = zst->zst_rbuf;
1571 cc--;
1572
1573 rr0 = zs_read_csr(cs);
1574 if (!ISSET(rr0, ZSRR0_RX_READY))
1575 break;
1576 }
1577
1578 /*
1579 * Current string of incoming characters ended because
1580 * no more data was available or we ran out of space.
1581 * Schedule a receive event if any data was received.
1582 * If we're out of space, turn off receive interrupts.
1583 */
1584 zst->zst_rbput = put;
1585 zst->zst_rbavail = cc;
1586 if (!ISSET(zst->zst_rx_flags, RX_TTY_OVERFLOWED)) {
1587 zst->zst_rx_ready = 1;
1588 cs->cs_softreq = 1;
1589 }
1590
1591 /*
1592 * See if we are in danger of overflowing a buffer. If
1593 * so, use hardware flow control to ease the pressure.
1594 */
1595 if (!ISSET(zst->zst_rx_flags, RX_IBUF_BLOCKED) &&
1596 cc < zst->zst_r_hiwat) {
1597 SET(zst->zst_rx_flags, RX_IBUF_BLOCKED);
1598 zs_hwiflow(zst);
1599 }
1600
1601 /*
1602 * If we're out of space, disable receive interrupts
1603 * until the queue has drained a bit.
1604 */
1605 if (!cc) {
1606 SET(zst->zst_rx_flags, RX_IBUF_OVERFLOWED);
1607 CLR(cs->cs_preg[1], ZSWR1_RIE);
1608 cs->cs_creg[1] = cs->cs_preg[1];
1609 zs_write_reg(cs, 1, cs->cs_creg[1]);
1610 }
1611
1612 #if 0
1613 printf("%xH%04d\n", zst->zst_rx_flags, zst->zst_rbavail);
1614 #endif
1615 }
1616
1617 /*
1618 * Transmitter Ready interrupt.
1619 * Called at splzs() and with the channel lock held.
1620 */
1621 static void
1622 zstty_txint(cs)
1623 struct zs_chanstate *cs;
1624 {
1625 struct zstty_softc *zst = cs->cs_private;
1626
1627 /*
1628 * If we've delayed a parameter change, do it now, and restart
1629 * output.
1630 */
1631 if (cs->cs_heldchange) {
1632 zs_loadchannelregs(cs);
1633 cs->cs_heldchange = 0;
1634 zst->zst_tbc = zst->zst_heldtbc;
1635 zst->zst_heldtbc = 0;
1636 }
1637
1638 /* Output the next character in the buffer, if any. */
1639 if (zst->zst_tbc > 0) {
1640 zs_write_data(cs, *zst->zst_tba);
1641 zst->zst_tbc--;
1642 zst->zst_tba++;
1643 } else {
1644 /* Disable transmit completion interrupts if necessary. */
1645 if (ISSET(cs->cs_preg[1], ZSWR1_TIE)) {
1646 CLR(cs->cs_preg[1], ZSWR1_TIE);
1647 cs->cs_creg[1] = cs->cs_preg[1];
1648 zs_write_reg(cs, 1, cs->cs_creg[1]);
1649 }
1650 if (zst->zst_tx_busy) {
1651 zst->zst_tx_busy = 0;
1652 zst->zst_tx_done = 1;
1653 cs->cs_softreq = 1;
1654 }
1655 }
1656 }
1657
1658 /*
1659 * Status Change interrupt.
1660 * Called at splzs() and with the channel lock held.
1661 */
1662 static void
1663 zstty_stint(cs, force)
1664 struct zs_chanstate *cs;
1665 int force;
1666 {
1667 struct zstty_softc *zst = cs->cs_private;
1668 u_char rr0, delta;
1669
1670 rr0 = zs_read_csr(cs);
1671 zs_write_csr(cs, ZSWR0_RESET_STATUS);
1672
1673 /*
1674 * Check here for console break, so that we can abort
1675 * even when interrupts are locking up the machine.
1676 */
1677 if (ISSET(rr0, ZSRR0_BREAK))
1678 cn_check_magic(zst->zst_tty->t_dev, CNC_BREAK, zstty_cnm_state);
1679
1680 if (!force)
1681 delta = rr0 ^ cs->cs_rr0;
1682 else
1683 delta = cs->cs_rr0_mask;
1684 cs->cs_rr0 = rr0;
1685
1686 if (ISSET(delta, cs->cs_rr0_mask)) {
1687 SET(cs->cs_rr0_delta, delta);
1688
1689 /*
1690 * Pulse-per-second clock signal on edge of DCD?
1691 */
1692 if (ISSET(delta, zst->zst_ppsmask)) {
1693 #ifdef __HAVE_TIMECOUNTER
1694 if (zst->zst_pps_state.ppsparam.mode & PPS_CAPTUREBOTH) {
1695 pps_capture(&zst->zst_pps_state);
1696 pps_event(&zst->zst_pps_state,
1697 (ISSET(cs->cs_rr0, zst->zst_ppsmask))
1698 ? PPS_CAPTUREASSERT
1699 : PPS_CAPTURECLEAR);
1700 }
1701 #else /* !__HAVE_TIMECOUNTER */
1702 struct timeval tv;
1703 if (ISSET(rr0, zst->zst_ppsmask) == zst->zst_ppsassert) {
1704 /* XXX nanotime() */
1705 microtime(&tv);
1706 TIMEVAL_TO_TIMESPEC(&tv,
1707 &zst->ppsinfo.assert_timestamp);
1708 if (zst->ppsparam.mode & PPS_OFFSETASSERT) {
1709 timespecadd(&zst->ppsinfo.assert_timestamp,
1710 &zst->ppsparam.assert_offset,
1711 &zst->ppsinfo.assert_timestamp);
1712 }
1713
1714 #ifdef PPS_SYNC
1715 if (pps_kc_hardpps_source == zst &&
1716 pps_kc_hardpps_mode & PPS_CAPTUREASSERT) {
1717 hardpps(&tv, tv.tv_usec);
1718 }
1719 #endif
1720 zst->ppsinfo.assert_sequence++;
1721 zst->ppsinfo.current_mode = zst->ppsparam.mode;
1722 } else if (ISSET(rr0, zst->zst_ppsmask) ==
1723 zst->zst_ppsclear) {
1724 /* XXX nanotime() */
1725 microtime(&tv);
1726 TIMEVAL_TO_TIMESPEC(&tv,
1727 &zst->ppsinfo.clear_timestamp);
1728 if (zst->ppsparam.mode & PPS_OFFSETCLEAR) {
1729 timespecadd(&zst->ppsinfo.clear_timestamp,
1730 &zst->ppsparam.clear_offset,
1731 &zst->ppsinfo.clear_timestamp);
1732 }
1733
1734 #ifdef PPS_SYNC
1735 if (pps_kc_hardpps_source == zst &&
1736 pps_kc_hardpps_mode & PPS_CAPTURECLEAR) {
1737 hardpps(&tv, tv.tv_usec);
1738 }
1739 #endif
1740 zst->ppsinfo.clear_sequence++;
1741 zst->ppsinfo.current_mode = zst->ppsparam.mode;
1742 }
1743 #endif /* !__HAVE_TIMECOUNTER */
1744 }
1745
1746 /*
1747 * Stop output immediately if we lose the output
1748 * flow control signal or carrier detect.
1749 */
1750 if (ISSET(~rr0, cs->cs_rr0_mask)) {
1751 zst->zst_tbc = 0;
1752 zst->zst_heldtbc = 0;
1753 }
1754
1755 zst->zst_st_check = 1;
1756 cs->cs_softreq = 1;
1757 }
1758 }
1759
1760 void
1761 zstty_diag(arg)
1762 void *arg;
1763 {
1764 struct zstty_softc *zst = arg;
1765 int overflows, floods;
1766 int s;
1767
1768 s = splzs();
1769 overflows = zst->zst_overflows;
1770 zst->zst_overflows = 0;
1771 floods = zst->zst_floods;
1772 zst->zst_floods = 0;
1773 zst->zst_errors = 0;
1774 splx(s);
1775
1776 log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf flood%s\n",
1777 zst->zst_dev.dv_xname,
1778 overflows, overflows == 1 ? "" : "s",
1779 floods, floods == 1 ? "" : "s");
1780 }
1781
1782 integrate void
1783 zstty_rxsoft(zst, tp)
1784 struct zstty_softc *zst;
1785 struct tty *tp;
1786 {
1787 struct zs_chanstate *cs = zst->zst_cs;
1788 int (*rint)(int, struct tty *) = tp->t_linesw->l_rint;
1789 u_char *get, *end;
1790 u_int cc, scc;
1791 u_char rr1;
1792 int code;
1793 int s;
1794
1795 end = zst->zst_ebuf;
1796 get = zst->zst_rbget;
1797 scc = cc = zstty_rbuf_size - zst->zst_rbavail;
1798
1799 if (cc == zstty_rbuf_size) {
1800 zst->zst_floods++;
1801 if (zst->zst_errors++ == 0)
1802 callout_reset(&zst->zst_diag_ch, 60 * hz,
1803 zstty_diag, zst);
1804 }
1805
1806 /* If not yet open, drop the entire buffer content here */
1807 if (!ISSET(tp->t_state, TS_ISOPEN)) {
1808 get += cc << 1;
1809 if (get >= end)
1810 get -= zstty_rbuf_size << 1;
1811 cc = 0;
1812 }
1813 while (cc) {
1814 code = get[0];
1815 rr1 = get[1];
1816 if (ISSET(rr1, ZSRR1_DO | ZSRR1_FE | ZSRR1_PE)) {
1817 if (ISSET(rr1, ZSRR1_DO)) {
1818 zst->zst_overflows++;
1819 if (zst->zst_errors++ == 0)
1820 callout_reset(&zst->zst_diag_ch,
1821 60 * hz, zstty_diag, zst);
1822 }
1823 if (ISSET(rr1, ZSRR1_FE))
1824 SET(code, TTY_FE);
1825 if (ISSET(rr1, ZSRR1_PE))
1826 SET(code, TTY_PE);
1827 }
1828 if ((*rint)(code, tp) == -1) {
1829 /*
1830 * The line discipline's buffer is out of space.
1831 */
1832 if (!ISSET(zst->zst_rx_flags, RX_TTY_BLOCKED)) {
1833 /*
1834 * We're either not using flow control, or the
1835 * line discipline didn't tell us to block for
1836 * some reason. Either way, we have no way to
1837 * know when there's more space available, so
1838 * just drop the rest of the data.
1839 */
1840 get += cc << 1;
1841 if (get >= end)
1842 get -= zstty_rbuf_size << 1;
1843 cc = 0;
1844 } else {
1845 /*
1846 * Don't schedule any more receive processing
1847 * until the line discipline tells us there's
1848 * space available (through comhwiflow()).
1849 * Leave the rest of the data in the input
1850 * buffer.
1851 */
1852 SET(zst->zst_rx_flags, RX_TTY_OVERFLOWED);
1853 }
1854 break;
1855 }
1856 get += 2;
1857 if (get >= end)
1858 get = zst->zst_rbuf;
1859 cc--;
1860 }
1861
1862 if (cc != scc) {
1863 zst->zst_rbget = get;
1864 s = splzs();
1865 simple_lock(&cs->cs_lock);
1866 cc = zst->zst_rbavail += scc - cc;
1867 /* Buffers should be ok again, release possible block. */
1868 if (cc >= zst->zst_r_lowat) {
1869 if (ISSET(zst->zst_rx_flags, RX_IBUF_OVERFLOWED)) {
1870 CLR(zst->zst_rx_flags, RX_IBUF_OVERFLOWED);
1871 SET(cs->cs_preg[1], ZSWR1_RIE);
1872 cs->cs_creg[1] = cs->cs_preg[1];
1873 zs_write_reg(cs, 1, cs->cs_creg[1]);
1874 }
1875 if (ISSET(zst->zst_rx_flags, RX_IBUF_BLOCKED)) {
1876 CLR(zst->zst_rx_flags, RX_IBUF_BLOCKED);
1877 zs_hwiflow(zst);
1878 }
1879 }
1880 simple_unlock(&cs->cs_lock);
1881 splx(s);
1882 }
1883
1884 #if 0
1885 printf("%xS%04d\n", zst->zst_rx_flags, zst->zst_rbavail);
1886 #endif
1887 }
1888
1889 integrate void
1890 zstty_txsoft(zst, tp)
1891 struct zstty_softc *zst;
1892 struct tty *tp;
1893 {
1894 struct zs_chanstate *cs = zst->zst_cs;
1895 int s;
1896
1897 s = splzs();
1898 simple_lock(&cs->cs_lock);
1899 CLR(tp->t_state, TS_BUSY);
1900 if (ISSET(tp->t_state, TS_FLUSH))
1901 CLR(tp->t_state, TS_FLUSH);
1902 else
1903 ndflush(&tp->t_outq, (int)(zst->zst_tba - tp->t_outq.c_cf));
1904 simple_unlock(&cs->cs_lock);
1905 splx(s);
1906 (*tp->t_linesw->l_start)(tp);
1907 }
1908
1909 integrate void
1910 zstty_stsoft(zst, tp)
1911 struct zstty_softc *zst;
1912 struct tty *tp;
1913 {
1914 struct zs_chanstate *cs = zst->zst_cs;
1915 u_char rr0, delta;
1916 int s;
1917
1918 s = splzs();
1919 simple_lock(&cs->cs_lock);
1920 rr0 = cs->cs_rr0;
1921 delta = cs->cs_rr0_delta;
1922 cs->cs_rr0_delta = 0;
1923 simple_unlock(&cs->cs_lock);
1924 splx(s);
1925
1926 if (ISSET(delta, cs->cs_rr0_dcd)) {
1927 /*
1928 * Inform the tty layer that carrier detect changed.
1929 */
1930 (void) (*tp->t_linesw->l_modem)(tp, ISSET(rr0, ZSRR0_DCD));
1931 }
1932
1933 if (ISSET(delta, cs->cs_rr0_cts)) {
1934 /* Block or unblock output according to flow control. */
1935 if (ISSET(rr0, cs->cs_rr0_cts)) {
1936 zst->zst_tx_stopped = 0;
1937 (*tp->t_linesw->l_start)(tp);
1938 } else {
1939 zst->zst_tx_stopped = 1;
1940 }
1941 }
1942 }
1943
1944 /*
1945 * Software interrupt. Called at zssoft
1946 *
1947 * The main job to be done here is to empty the input ring
1948 * by passing its contents up to the tty layer. The ring is
1949 * always emptied during this operation, therefore the ring
1950 * must not be larger than the space after "high water" in
1951 * the tty layer, or the tty layer might drop our input.
1952 *
1953 * Note: an "input blockage" condition is assumed to exist if
1954 * EITHER the TS_TBLOCK flag or zst_rx_blocked flag is set.
1955 */
1956 static void
1957 zstty_softint(cs)
1958 struct zs_chanstate *cs;
1959 {
1960 struct zstty_softc *zst = cs->cs_private;
1961 struct tty *tp = zst->zst_tty;
1962 int s;
1963
1964 s = spltty();
1965
1966 if (zst->zst_rx_ready) {
1967 zst->zst_rx_ready = 0;
1968 zstty_rxsoft(zst, tp);
1969 }
1970
1971 if (zst->zst_st_check) {
1972 zst->zst_st_check = 0;
1973 zstty_stsoft(zst, tp);
1974 }
1975
1976 if (zst->zst_tx_done) {
1977 zst->zst_tx_done = 0;
1978 zstty_txsoft(zst, tp);
1979 }
1980
1981 splx(s);
1982 }
1983
1984 struct zsops zsops_tty = {
1985 zstty_rxint, /* receive char available */
1986 zstty_stint, /* external/status */
1987 zstty_txint, /* xmit buffer empty */
1988 zstty_softint, /* process software interrupt */
1989 };
1990
1991 #ifdef ZS_TXDMA
1992 void
1993 zstty_txdma_int(arg)
1994 void *arg;
1995 {
1996 struct zs_chanstate *cs = arg;
1997 struct zstty_softc *zst = cs->cs_private;
1998
1999 zst->zst_tba += zst->zst_tbc;
2000 zst->zst_tbc = 0;
2001
2002 if (zst->zst_tx_busy) {
2003 zst->zst_tx_busy = 0;
2004 zst->zst_tx_done = 1;
2005 cs->cs_softreq = 1;
2006 }
2007 }
2008 #endif
Cache object: 18c2f1bd4373861e00cf97f128f68624
|