Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/dev/isci/scil/intel_scsi.h
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0 3 * 4 * This file is provided under a dual BSD/GPLv2 license. When using or 5 * redistributing this file, you may do so under either license. 6 * 7 * GPL LICENSE SUMMARY 8 * 9 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of version 2 of the GNU General Public License as 13 * published by the Free Software Foundation. 14 * 15 * This program is distributed in the hope that it will be useful, but 16 * WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 18 * General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 23 * The full GNU General Public License is included in this distribution 24 * in the file called LICENSE.GPL. 25 * 26 * BSD LICENSE 27 * 28 * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. 29 * All rights reserved. 30 * 31 * Redistribution and use in source and binary forms, with or without 32 * modification, are permitted provided that the following conditions 33 * are met: 34 * 35 * * Redistributions of source code must retain the above copyright 36 * notice, this list of conditions and the following disclaimer. 37 * * Redistributions in binary form must reproduce the above copyright 38 * notice, this list of conditions and the following disclaimer in 39 * the documentation and/or other materials provided with the 40 * distribution. 41 * 42 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 43 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 44 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 45 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 46 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 47 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 48 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 49 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 50 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 51 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 52 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 53 * 54 * $FreeBSD$ 55 */ 56 /** 57 * @file 58 * @brief This file defines all of the SCSI related constants, enumerations, 59 * and types. Please note that this file does not necessarily contain 60 * an exhaustive list of all constants, commands, sub-commands, etc. 61 */ 62 63 #ifndef _SCSI_H__ 64 #define _SCSI_H__ 65 66 67 //****************************************************************************** 68 //* C O N S T A N T S A N D M A C R O S 69 //****************************************************************************** 70 71 /** 72 * @enum _SCSI_TASK_MGMT_REQUEST_CODES 73 * 74 * @brief This enumberation contains the constants to be used for SCSI task 75 * management request codes. SAM does not specify any particular 76 * values for these codes so constants used here are the same as 77 * those specified in SAS. 78 */ 79 typedef enum _SCSI_TASK_MGMT_REQUEST_CODES 80 { 81 SCSI_TASK_REQUEST_ABORT_TASK = 0x01, 82 SCSI_TASK_REQUEST_ABORT_TASK_SET = 0x02, 83 SCSI_TASK_REQUEST_CLEAR_TASK_SET = 0x04, 84 SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET = 0x08, 85 SCSI_TASK_REQUEST_I_T_NEXUS_RESET = 0x10, 86 SCSI_TASK_REQUEST_CLEAR_ACA = 0x40, 87 SCSI_TASK_REQUEST_QUERY_TASK = 0x80, 88 SCSI_TASK_REQUEST_QUERY_TASK_SET = 0x81, 89 SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION = 0x82, 90 91 } SCSI_TASK_MGMT_REQUEST_CODES; 92 93 /** 94 * @enum _SCSI_TASK_MGMT_RESPONSE_CODES 95 * 96 * @brief This enumeration contains all of the SCSI task management response 97 * codes. 98 */ 99 typedef enum _SCSI_TASK_MGMT_RESPONSE_CODES 100 { 101 SCSI_TASK_MGMT_FUNC_COMPLETE = 0, 102 SCSI_INVALID_FRAME = 2, 103 SCSI_TASK_MGMT_FUNC_NOT_SUPPORTED = 4, 104 SCSI_TASK_MGMT_FUNC_FAILED = 5, 105 SCSI_TASK_MGMT_FUNC_SUCCEEDED = 8, 106 SCSI_INVALID_LUN = 9 107 } SCSI_TASK_MGMT_RESPONSE_CODES; 108 109 /** 110 * @enum _SCSI_SENSE_RESPONSE_CODE 111 * 112 * @brief this enumeration depicts the types of sense data responses as 113 * per SPC-3. 114 */ 115 typedef enum _SCSI_SENSE_RESPONSE_CODE 116 { 117 SCSI_FIXED_CURRENT_RESPONSE_CODE = 0x70, 118 SCSI_FIXED_DEFERRED_RESPONSE_CODE = 0x71, 119 SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE = 0x72, 120 SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE = 0x73 121 122 } SCSI_SENSE_RESPONSE_CODE; 123 124 /** 125 * @enum _SCSI_SENSE_DATA_DESCRIPTOR_TYPE 126 * 127 * @brief this enumeration depicts the types of sense data descriptor as 128 * per SPC-4. 129 */ 130 typedef enum _SCSI_SENSE_DATA_DESCRIPTOR_TYPE 131 { 132 SCSI_INFORMATION_DESCRIPTOR_TYPE = 0x00, 133 SCSI_CMD_SPECIFIC_DESCRIPTOR_TYPE = 0x01, 134 SCSI_KEY_SPECIFIC_DESCRIPTOR_TYPE = 0x02, 135 SCSI_FIELD_REPLACEABLE_UNIT_DESCRIPTOR_TYPE = 0x03, 136 SCSI_STREAM_CMD_DESCRIPTOR_TYPE = 0x04, 137 SCSI_BLOCK_DESCRIPTOR_TYPE = 0x05, 138 SCSI_OSD_OBJ_IDENTIFICATION_DESCRIPTOR_TYPE = 0x06, 139 SCSI_OSC_RESPONSE_INTEGRITY_DESCRIPTOR_TYPE = 0x07, 140 SCSI_OSD_ATTR_IDENTIFICATION_DESCRIPTOR_TYPE = 0x08, 141 SCSI_ATA_STATUS_RETURN_DESCRIPTOR_TYPE = 0x09, 142 SCSI_PROGRESS_INDICATION_DESCRIPTOR_TYPE = 0x0a, 143 SCSI_USER_DATA_SEGEMNT_REF_DESCRIPTOR_TYPE = 0x0b 144 } SCSI_SENSE_DATA_DESCRIPTOR_TYPE; 145 146 #define SCSI_CMD_SPECIFIC_DESCRIPTOR_ADDITIONAL_LENGTH 0x0a 147 #define SCSI_CMD_SPECIFIC_DESCRIPTOR_LENGTH 0x0c 148 #define SCSI_INFORMATION_DESCRIPTOR_ADDITIONAL_LENGTH 0x0a 149 #define SCSI_INFORMATION_DESCRIPTOR_LENGTH 0x0c 150 #define SCSI_BLOCK_DESCRIPTOR_ADDITIONAL_LENGTH 0x2 151 #define SCSI_BLOCK_DESCRIPTOR_LENGTH 0x4 152 153 #define SCSI_SENSE_DATA_DESC_BIT 0x01 154 155 // This constant represents the valid bit located in byte 0 of a FIXED 156 // format sense data. 157 #define SCSI_FIXED_SENSE_DATA_VALID_BIT 0x80 158 159 #define SCSI_FIXED_SENSE_DATA_BASE_LENGTH 18 160 161 // This value is used in the DATAPRES field of the SCSI Response IU. 162 #define SCSI_RESPONSE_DATA_PRES_SENSE_DATA 0x02 163 164 /** 165 * @name SCSI_SENSE_KEYS 166 * 167 * These constants delineate all of the SCSI protocol sense key constants 168 */ 169 /*@{*/ 170 #define SCSI_SENSE_NO_SENSE 0x00 171 #define SCSI_SENSE_RECOVERED_ERROR 0x01 172 #define SCSI_SENSE_NOT_READY 0x02 173 #define SCSI_SENSE_MEDIUM_ERROR 0x03 174 #define SCSI_SENSE_HARDWARE_ERROR 0x04 175 #define SCSI_SENSE_ILLEGAL_REQUEST 0x05 176 #define SCSI_SENSE_UNIT_ATTENTION 0x06 177 #define SCSI_SENSE_DATA_PROTECT 0x07 178 #define SCSI_SENSE_BLANK_CHECK 0x08 179 #define SCSI_SENSE_VENDOR_SPECIFIC 0x09 180 #define SCSI_SENSE_COPY_ABORTED 0x0A 181 #define SCSI_SENSE_ABORTED_COMMAND 0x0B 182 #define SCSI_SENSE_VOLUME_OVERFLOW 0x0D 183 #define SCSI_SENSE_MISCOMPARE 0x0E 184 /*@}*/ 185 186 /** 187 * @name SCSI_ADDITIONAL_SENSE_CODES 188 * 189 * These constants delineate all of the SCSI protocol additional sense 190 * code constants. 191 */ 192 /*@{*/ 193 #define SCSI_ASC_NO_ADDITIONAL_SENSE 0x00 194 #define SCSI_ASC_INITIALIZING_COMMAND_REQUIRED 0x04 195 #define SCSI_ASC_LUN_SELF_TEST_IN_PROGRESS 0x04 196 #define SCSI_ASC_LUN_FORMAT_IN_PROGRESS 0x04 197 #define SCSI_ASC_LUN_NOT_RESPOND_TO_SELECTION 0x05 198 #define SCSI_ASC_UNRECOVERED_READ_ERROR 0x11 199 #define SCSI_ASC_INVALID_COMMAND_OPERATION_CODE 0x20 200 #define SCSI_ASC_LBA_OUT_OF_RANGE 0x21 201 #define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24 202 #define SCSI_ASC_LOGICAL_UNIT_NOT_SUPPORTED 0x25 203 #define SCSI_ASC_INVALID_FIELD_IN_PARM_LIST 0x26 204 #define SCSI_ASC_WRITE_PROTECTED 0x27 205 #define SCSI_ASC_NOT_READY_TO_READY_CHANGE 0x28 206 #define SCSI_ASC_MEDIUM_FORMAT_CORRUPTED 0x31 207 #define SCSI_ASC_ENCLOSURE_SERVICES_UNAVAILABLE 0x35 208 #define SCSI_ASC_SAVING_PARMS_NOT_SUPPORTED 0x39 209 #define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3A 210 #define SCSI_ASC_INTERNAL_TARGET_FAILURE 0x44 211 #define SCSI_ASC_IU_CRC_ERROR_DETECTED 0x47 212 #define SCSI_ASC_MEDIUM_REMOVAL_REQUEST 0x5A 213 #define SCSI_ASC_COMMAND_SEQUENCE_ERROR 0x2C 214 #define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53 215 #define SCSI_ASC_HARDWARE_IMPENDING_FAILURE 0x5D 216 #define SCSI_ASC_POWER_STATE_CHANGE 0x5E 217 #define SCSI_DIAGNOSTIC_FAILURE_ON_COMPONENT 0x40 218 #define SCSI_ASC_LOGICAL_UNIT_FAILED 0x4C 219 #define SCSI_ASC_ATA_DEVICE_FEATURE_NOT_ENABLED 0x67 220 #define SCSI_ASC_MICROCODE_HAS_CHANGED 0x3F 221 /*@}*/ 222 223 /** 224 * @name SCSI_ADDITIONAL_SENSE_CODE_QUALIFIERS 225 * 226 * This enumeration contains all of the used SCSI protocol additional 227 * sense code qualifier constants. 228 */ 229 /*@{*/ 230 #define SCSI_ASCQ_NO_ADDITIONAL_SENSE 0x00 231 #define SCSI_ASCQ_INVALID_FIELD_IN_CDB 0x00 232 #define SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST 0x00 233 #define SCSI_ASCQ_LUN_NOT_RESPOND_TO_SELECTION 0x00 234 #define SCSI_ASCQ_INTERNAL_TARGET_FAILURE 0x00 235 #define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00 236 #define SCSI_ASCQ_MEDIUM_NOT_PRESENT 0x00 237 #define SCSI_ASCQ_NOT_READY_TO_READY_CHANGE 0x00 238 #define SCSI_ASCQ_WRITE_PROTECTED 0x00 239 #define SCSI_ASCQ_UNRECOVERED_READ_ERROR 0x00 240 #define SCSI_ASCQ_SAVING_PARMS_NOT_SUPPORTED 0x00 241 #define SCSI_ASCQ_INVALID_COMMAND_OPERATION_CODE 0x00 242 #define SCSI_ASCQ_MEDIUM_REMOVAL_REQUEST 0x01 243 #define SCSI_ASCQ_INITIALIZING_COMMAND_REQUIRED 0x02 244 #define SCSI_ASCQ_IU_CRC_ERROR_DETECTED 0x03 245 #define SCSI_ASCQ_LUN_FORMAT_IN_PROGRESS 0x04 246 #define SCSI_ASCQ_LUN_SELF_TEST_IN_PROGRESS 0x09 247 #define SCSI_ASCQ_GENERAL_HARD_DRIVE_FAILURE 0x10 248 #define SCSI_ASCQ_IDLE_CONDITION_ACTIVATE_BY_COMMAND 0x03 249 #define SCSI_ASCQ_STANDBY_CONDITION_ACTIVATE_BY_COMMAND 0x04 250 #define SCSI_ASCQ_POWER_STATE_CHANGE_TO_IDLE 0x42 251 #define SCSI_ASCQ_POWER_STATE_CHANGE_TO_STANDBY 0x43 252 #define SCSI_ASCQ_ATA_DEVICE_FEATURE_NOT_ENABLED 0x0B 253 #define SCSI_ASCQ_UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAIL 0x04 254 #define SCSI_ASCQ_ATA_PASS_THROUGH_INFORMATION_AVAILABLE 0x1D 255 #define SCSI_ASCQ_MICROCODE_HAS_CHANGED 0x01 256 /*@}*/ 257 258 /** 259 * @name SCSI_STATUS_CODES 260 * 261 * These constants define all of the used SCSI status values. 262 */ 263 /*@{*/ 264 #define SCSI_STATUS_GOOD 0x00 265 #define SCSI_STATUS_CHECK_CONDITION 0x02 266 #define SCSI_STATUS_CONDITION_MET 0x04 267 #define SCSI_STATUS_BUSY 0x08 268 #define SCSI_STATUS_TASKFULL 0x28 269 #define SCSI_STATUS_ACA 0x30 270 #define SCSI_STATUS_ABORT 0x40 271 /*@}*/ 272 273 /** 274 * @name SCSI_OPERATION_CODES 275 * 276 * These constants delineate all of the SCSI command/operation codes. 277 */ 278 /*@{*/ 279 #define SCSI_INQUIRY 0x12 280 #define SCSI_READ_CAPACITY_10 0x25 281 #define SCSI_SERVICE_ACTION_IN_16 0x9E 282 #define SCSI_TEST_UNIT_READY 0x00 283 #define SCSI_START_STOP_UNIT 0x1B 284 #define SCSI_SYNCHRONIZE_CACHE_10 0x35 285 #define SCSI_SYNCHRONIZE_CACHE_16 0x91 286 #define SCSI_REQUEST_SENSE 0x03 287 #define SCSI_REPORT_LUNS 0xA0 288 #define SCSI_REASSIGN_BLOCKS 0x07 289 #define SCSI_READ_6 0x08 290 #define SCSI_READ_10 0x28 291 #define SCSI_READ_12 0xA8 292 #define SCSI_READ_16 0x88 293 #define SCSI_WRITE_6 0x0A 294 #define SCSI_WRITE_10 0x2A 295 #define SCSI_WRITE_12 0xAA 296 #define SCSI_WRITE_16 0x8A 297 #define SCSI_VERIFY_10 0x2F 298 #define SCSI_VERIFY_12 0xAF 299 #define SCSI_VERIFY_16 0x8F 300 #define SCSI_SEEK_6 0x01 301 #define SCSI_SEEK_10 0x02 302 #define SCSI_WRITE_VERIFY 0x2E 303 #define SCSI_FORMAT_UNIT 0x04 304 #define SCSI_READ_BUFFER 0x3C 305 #define SCSI_WRITE_BUFFER 0x3B 306 #define SCSI_SEND_DIAGNOSTIC 0x1D 307 #define SCSI_RECEIVE_DIAGNOSTIC 0x1C 308 #define SCSI_MODE_SENSE_6 0x1A 309 #define SCSI_MODE_SENSE_10 0x5A 310 #define SCSI_MODE_SELECT_6 0x15 311 #define SCSI_MODE_SELECT_10 0x55 312 #define SCSI_MAINTENANCE_IN 0xA3 313 #define SCSI_LOG_SENSE 0x4D 314 #define SCSI_LOG_SELECT 0x4C 315 #define SCSI_RESERVE_6 0x16 316 #define SCSI_RESERVE_10 0x56 317 #define SCSI_RELEASE_6 0x17 318 #define SCSI_RELEASE_10 0x57 319 #define SCSI_ATA_PASSTHRU_12 0xA1 320 #define SCSI_ATA_PASSTHRU_16 0x85 321 #define SCSI_WRITE_LONG_10 0x3F 322 #define SCSI_WRITE_LONG_16 0x9F 323 #define SCSI_PERSISTENT_RESERVE_IN 0x5E 324 #define SCSI_PERSISTENT_RESERVE_OUT 0x5F 325 #define SCSI_SECURITY_PROTOCOL_IN 0xA2 326 #define SCSI_SECURITY_PROTOCOL_OUT 0xB5 327 #define SCSI_UNMAP 0x42 328 #define SCSI_WRITE_AND_VERIFY_10 0x2E 329 #define SCSI_WRITE_AND_VERIFY_12 0xAE 330 #define SCSI_WRITE_AND_VERIFY_16 0x8E 331 /*@}*/ 332 333 /** 334 * @name SCSI_SERVICE_ACTION_IN_CODES 335 * 336 * Service action in operations. 337 */ 338 /*@{*/ 339 #define SCSI_SERVICE_ACTION_IN_CODES_READ_CAPACITY_16 0x10 340 /*@}*/ 341 342 /** 343 * 344 * Service action mask. 345 */ 346 /*@{*/ 347 #define SCSI_SERVICE_ACTION_MASK 0x1f 348 /*@}*/ 349 350 /** 351 * @name SCSI_MAINTENANCE_IN_SERVICE_ACTION_CODES 352 * 353 * MAINTENANCE IN service action codes. 354 */ 355 /*@{*/ 356 #define SCSI_REPORT_TASK_MGMT 0x0D 357 #define SCSI_REPORT_OP_CODES 0x0C 358 /*@}*/ 359 360 /** 361 * @name SCSI_MODE_PAGE_CONTROLS 362 * 363 * These constants delineate all of the used SCSI Mode Page control 364 * values. 365 */ 366 /*@{*/ 367 #define SCSI_MODE_SENSE_PC_CURRENT 0x0 368 #define SCSI_MODE_SENSE_PC_CHANGEABLE 0x1 369 #define SCSI_MODE_SENSE_PC_DEFAULT 0x2 370 #define SCSI_MODE_SENSE_PC_SAVED 0x3 371 /*@}*/ 372 373 #define SCSI_MODE_SENSE_PC_SHIFT 0x06 374 #define SCSI_MODE_SENSE_PAGE_CODE_ENABLE 0x3F 375 #define SCSI_MODE_SENSE_DBD_ENABLE 0x08 376 #define SCSI_MODE_SENSE_LLBAA_ENABLE 0x10 377 378 #define SCSI_MODE_PAGE_CONTROL_D_SENSE_DISABLE 0x0 379 #define SCSI_MODE_PAGE_CONTROL_D_SENSE_ENABLE 0x1 380 /** 381 * @name SCSI_MODE_PAGE_CODES 382 * 383 * These constants delineate all of the used SCSI Mode Page codes. 384 */ 385 /*@{*/ 386 #define SCSI_MODE_PAGE_READ_WRITE_ERROR 0x01 387 #define SCSI_MODE_PAGE_DISCONNECT_RECONNECT 0x02 388 #define SCSI_MODE_PAGE_CACHING 0x08 389 #define SCSI_MODE_PAGE_CONTROL 0x0A 390 #define SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT 0x19 391 #define SCSI_MODE_PAGE_POWER_CONDITION 0x1A 392 #define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL 0x1C 393 #define SCSI_MODE_PAGE_ALL_PAGES 0x3F 394 /*@}*/ 395 396 #define SCSI_MODE_SENSE_ALL_SUB_PAGES_CODE 0xFF 397 #define SCSI_MODE_SENSE_NO_SUB_PAGES_CODE 0x0 398 #define SCSI_MODE_SENSE_PROTOCOL_PORT_NUM_SUBPAGES 0x1 399 #define SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT 0x04 400 #define SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT 0x20 401 #define SCSI_MODE_PAGE_DEXCPT_ENABLE 0x08 402 #define SCSI_MODE_SENSE_HEADER_FUA_ENABLE 0x10 403 #define SCSI_MODE_PAGE_POWER_CONDITION_STANDBY 0x1 404 #define SCSI_MODE_PAGE_POWER_CONDITION_IDLE 0x2 405 406 #define SCSI_MODE_SENSE_6_HEADER_LENGTH 4 407 #define SCSI_MODE_SENSE_10_HEADER_LENGTH 8 408 #define SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH 8 409 #define SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH 16 410 411 #define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_DXCPT_ENABLE 0x08 412 #define SCSI_MODE_PAGE_19_SAS_ID 0x6 413 #define SCSI_MODE_PAGE_19_SUB1_PAGE_NUM 0x1 414 #define SCSI_MODE_PAGE_19_SUB1_PC 0x59 415 416 #define SCSI_MODE_HEADER_MEDIUM_TYPE_SBC 0x00 417 418 //Mode Select constrains related masks value 419 #define SCSI_MODE_SELECT_PF_BIT 0x1 420 #define SCSI_MODE_SELECT_PF_MASK 0x10 421 #define SCSI_MODE_SELECT_MODE_PAGE_MRIE_BYTE 0x6 422 #define SCSI_MODE_SELECT_MODE_PAGE_MRIE_MASK 0x0F 423 #define SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK 0x40 424 #define SCSI_MODE_SELECT_MODE_PAGE_01_AWRE_MASK 0x80 425 #define SCSI_MODE_SELECT_MODE_PAGE_01_ARRE_MASK 0x40 426 #define SCSI_MODE_SELECT_MODE_PAGE_01_RC_ERBITS_MASK 0x1F 427 #define SCSI_MODE_SELECT_MODE_PAGE_08_FSW_LBCSS_NVDIS 0xC1 428 #define SCSI_MODE_SELECT_MODE_PAGE_1C_PERF_TEST 0x84 429 #define SCSI_MODE_SELECT_MODE_PAGE_0A_TST_TMF_RLEC 0xF1 430 #define SCSI_MODE_SELECT_MODE_PAGE_0A_MODIFIER 0xE0 431 #define SCSI_MODE_SELECT_MODE_PAGE_0A_UA_SWP 0x38 432 #define SCSI_MODE_SELECT_MODE_PAGE_0A_TAS_AUTO 0x47 433 #define SCSI_MODE_SELECT_MODE_PAGE_D_SENSE 0x4 434 435 #define SCSI_CONTROL_BYTE_NACA_BIT_ENABLE 0x04 436 #define SCSI_MOVE_FUA_BIT_ENABLE 0x08 437 #define SCSI_READ_CAPACITY_PMI_BIT_ENABLE 0x01 438 #define SCSI_READ_CAPACITY_10_DATA_LENGTH 8 439 #define SCSI_READ_CAPACITY_16_DATA_LENGTH 32 440 441 // Inquiry constants 442 #define SCSI_INQUIRY_EVPD_ENABLE 0x01 443 #define SCSI_INQUIRY_PAGE_CODE_OFFSET 0x02 444 #define SCSI_INQUIRY_SUPPORTED_PAGES_PAGE 0x00 445 #define SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE 0x80 446 #define SCSI_INQUIRY_DEVICE_ID_PAGE 0x83 447 #define SCSI_INQUIRY_ATA_INFORMATION_PAGE 0x89 448 #define SCSI_INQUIRY_BLOCK_DEVICE_PAGE 0xB1 449 #define SCSI_INQUIRY_BLOCK_DEVICE_LENGTH 0x3C 450 #define SCSI_INQUIRY_STANDARD_ALLOCATION_LENGTH 0x24 //36 451 452 #define SCSI_REQUEST_SENSE_ALLOCATION_LENGTH 0xFC //252 453 454 /** Defines the log page codes that are use in gathing Smart data 455 */ 456 #define SCSI_LOG_PAGE_SUPPORTED_PAGES 0x00 457 #define SCSI_LOG_PAGE_INFORMATION_EXCEPTION 0x2F 458 #define SCSI_LOG_PAGE_SELF_TEST 0x10 459 460 /** 461 * @name SCSI_INQUIRY_VPD 462 * 463 * The following are constants used with vital product data inquiry pages. 464 * Values are already shifted into the proper nibble location. 465 */ 466 /*@{*/ 467 #define SCSI_PIV_ENABLE 0x80 468 #define SCSI_LUN_ASSOCIATION 0x00 469 #define SCSI_TARGET_PORT_ASSOCIATION 0x10 470 471 #define SCSI_VEN_UNIQUE_IDENTIFIER_TYPE 0x00 472 #define SCSI_NAA_IDENTIFIER_TYPE 0x03 473 474 #define SCSI_T10_IDENTIFIER_TYPE 0x01 475 #define SCSI_BINARY_CODE_SET 0x01 476 #define SCSI_ASCII_CODE_SET 0x02 477 #define SCSI_FC_PROTOCOL_IDENTIFIER 0x00 478 #define SCSI_SAS_PROTOCOL_IDENTIFIER 0x60 479 /*@}*/ 480 481 #define SCSI_VERIFY_BYTCHK_ENABLED 0x02 482 483 #define SCSI_SYNCHRONIZE_CACHE_IMMED_ENABLED 0x02 484 /** 485 * @name SCSI_START_STOP_UNIT_POWER_CONDITION_CODES 486 * 487 * The following are SCSI Start Stop Unit command Power Condition codes. 488 */ 489 /*@{*/ 490 #define SCSI_START_STOP_UNIT_POWER_CONDITION_START_VALID 0x0 491 #define SCSI_START_STOP_UNIT_POWER_CONDITION_ACTIVE 0x1 492 #define SCSI_START_STOP_UNIT_POWER_CONDITION_IDLE 0x2 493 #define SCSI_START_STOP_UNIT_POWER_CONDITION_STANDBY 0x3 494 #define SCSI_START_STOP_UNIT_POWER_CONDITION_LU_CONTROL 0x7 495 #define SCSI_START_STOP_UNIT_POWER_CONDITION_FORCE_S_CONTROL 0xB 496 /*@}*/ 497 498 #define SCSI_START_STOP_UNIT_IMMED_MASK 0x1 499 #define SCSI_START_STOP_UNIT_IMMED_SHIFT 0 500 501 #define SCSI_START_STOP_UNIT_START_BIT_MASK 0x1 502 #define SCSI_START_STOP_UNIT_START_BIT_SHIFT 0 503 504 #define SCSI_START_STOP_UNIT_LOEJ_BIT_MASK 0x2 505 #define SCSI_START_STOP_UNIT_LOEJ_BIT_SHIFT 1 506 507 #define SCSI_START_STOP_UNIT_NO_FLUSH_MASK 0x4 508 #define SCSI_START_STOP_UNIT_NO_FLUSH_SHIFT 2 509 510 #define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_MASK 0xF 511 #define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_SHIFT 0 512 513 #define SCSI_START_STOP_UNIT_POWER_CONDITION_MASK 0xF0 514 #define SCSI_START_STOP_UNIT_POWER_CONDITION_SHIFT 4 515 516 #define SCSI_LOG_SENSE_PC_FIELD_MASK 0xC0 517 #define SCSI_LOG_SENSE_PC_FIELD_SHIFT 6 518 519 #define SCSI_LOG_SENSE_PAGE_CODE_FIELD_MASK 0x3F 520 #define SCSI_LOG_SENSE_PAGE_CODE_FIELD_SHIFT 0 521 522 /** 523 * @name MRIE - Method of reporting informational exceptions codes 524 */ 525 /*@{*/ 526 #define NO_REPORTING_INFO_EXCEPTION_CONDITION 0x0 527 #define ASYNCHRONOUS_EVENT_REPORTING 0x1 528 #define ESTABLISH_UNIT_ATTENTION_CONDITION 0x2 529 #define CONDITIONALLY_GENERATE_RECOVERED_ERROR 0x3 530 #define UNCONDITIONALLY_GENERATE_RECOVERED_ERROR 0x4 531 #define GENERATE_NO_SENSE 0x5 532 #define REPORT_INFO_EXCEPTION_CONDITION_ON_REQUEST 0x6 533 /*@}*/ 534 535 #define SCSI_INFORMATION_EXCEPTION_DEXCPT_BIT 0x08 536 537 //Reassign Blocks masks 538 #define SCSI_REASSIGN_BLOCKS_LONGLBA_BIT 0x02 539 #define SCSI_REASSIGN_BLOCKS_LONGLIST_BIT 0x01 540 541 #endif // _SCSI_H_ 542
Cache object: e5b233330606ea1a7e5a201eddb22f03
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]