FreeBSD/Linux Kernel Cross Reference
sys/dev/isci/scil/sati_lun_reset.c

     /*-
      * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0
      *
      * This file is provided under a dual BSD/GPLv2 license.  When using or
      * redistributing this file, you may do so under either license.
      *
      * GPL LICENSE SUMMARY
      *
      * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
     *
     * This program is free software; you can redistribute it and/or modify
     * it under the terms of version 2 of the GNU General Public License as
     * published by the Free Software Foundation.
     *
     * This program is distributed in the hope that it will be useful, but
     * WITHOUT ANY WARRANTY; without even the implied warranty of
     * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     * General Public License for more details.
     *
     * You should have received a copy of the GNU General Public License
     * along with this program; if not, write to the Free Software
     * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
     * The full GNU General Public License is included in this distribution
     * in the file called LICENSE.GPL.
     *
     * BSD LICENSE
     *
     * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
     * All rights reserved.
     *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     *
     *   * Redistributions of source code must retain the above copyright
     *     notice, this list of conditions and the following disclaimer.
     *   * Redistributions in binary form must reproduce the above copyright
     *     notice, this list of conditions and the following disclaimer in
     *     the documentation and/or other materials provided with the
     *     distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
     * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
     * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
     * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     */
    
    #include <sys/cdefs.h>
    __FBSDID("$FreeBSD$");
    
    /**
     * @file
     *
     * @brief This file contains the method implementations required to
     *        translate the SCSI lun reset command.
     */
    
    #if !defined(DISABLE_SATI_TASK_MANAGEMENT)
    
    #include <dev/isci/scil/sati_lun_reset.h>
    #include <dev/isci/scil/sati_callbacks.h>
    #include <dev/isci/scil/sati_util.h>
    #include <dev/isci/scil/intel_ata.h>
    #include <dev/isci/scil/intel_scsi.h>
    #include <dev/isci/scil/intel_sat.h>
    
    //******************************************************************************
    //* P U B L I C   M E T H O D S
    //******************************************************************************
    
    /**
     * @brief This method will translate the lun reset SCSI task request into an
     *        ATA SOFT RESET command. For more information on the parameters
     *        passed to this method, please reference sati_translate_command().
     *
     * @return Indicate if the command translation succeeded.
     * @retval SCI_SUCCESS This is returned if the command translation was
     *         successful.
     *
     * @note It is up to the user of the sata translator to set the command bit
     *       and clear the control softreset bit and send the second register fis.
     */
    SATI_STATUS sati_lun_reset_translate_command(
       SATI_TRANSLATOR_SEQUENCE_T * sequence,
       void                       * scsi_io,
       void                       * ata_io
    )
    {
       U8* register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
    
       sati_set_ata_command(register_fis, ATA_NOP);
       sati_set_ata_control(register_fis, ATA_CONTROL_REG_SOFT_RESET_BIT);
   
      //set all other fields to zero.
      sati_clear_sata_command_flag(register_fis);
      sati_set_ata_features(register_fis, 0);
      sati_set_ata_features_exp(register_fis, 0);
      sati_set_ata_sector_count(register_fis, 0);
      sati_set_ata_sector_count_exp(register_fis, 0);
      sati_set_ata_lba_low(register_fis, 0);
      sati_set_ata_lba_mid(register_fis, 0);
      sati_set_ata_lba_high(register_fis, 0);
      sati_set_ata_lba_low_exp(register_fis, 0);
      sati_set_ata_lba_mid_exp(register_fis, 0);
      sati_set_ata_lba_high_exp(register_fis, 0);
      sati_set_ata_device_head(register_fis, 0);
   
      sequence->type                = SATI_SEQUENCE_LUN_RESET;
      sequence->data_direction      = SATI_DATA_DIRECTION_NONE;
      sequence->protocol            = SAT_PROTOCOL_SOFT_RESET;
      sequence->ata_transfer_length = 0;
   
      return SATI_SUCCESS;
   }
   
   #endif // !defined(DISABLE_SATI_TASK_MANAGEMENT)
   

Cache object: 8675397aea2ff0a5fed56cfa43b124da