FreeBSD/Linux Kernel Cross Reference
sys/dev/le/lancereg.h

     /*      $NetBSD: lancereg.h,v 1.12 2005/12/11 12:21:27 christos Exp $   */
     
     /*-
      * SPDX-License-Identifier: BSD-2-Clause-NetBSD
      *
      * Copyright (c) 1998, 2000 The NetBSD Foundation, Inc.
      * All rights reserved.
      *
      * This code is derived from software contributed to The NetBSD Foundation
     * by Charles M. Hannum and Jason R. Thorpe.
     *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     * POSSIBILITY OF SUCH DAMAGE.
     */
    
    /*-
     * Copyright (c) 1992, 1993
     *      The Regents of the University of California.  All rights reserved.
     *
     * This code is derived from software contributed to Berkeley by
     * Ralph Campbell and Rick Macklem.
     *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. Neither the name of the University nor the names of its contributors
     *    may be used to endorse or promote products derived from this software
     *    without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     *
     *      @(#)if_lereg.h  8.1 (Berkeley) 6/10/93
     */
    
    /*
     * Register description for the following Advanced Micro Devices
     * Ethernet chips:
     *
     *      - Am7990 Local Area Network Controller for Ethernet (LANCE)
     *        (and its descendent Am79c90 C-LANCE).
     *
     *      - Am79c900 Integrated Local Area Communications Controller (ILACC)
     *
     *      - Am79c960 PCnet-ISA Single-Chip Ethernet Controller for ISA
     *
     *      - Am79c961 PCnet-ISA+ Jumperless Single-Chip Ethernet Controller
     *        for ISA
     *
     *      - Am79c961A PCnet-ISA II Jumperless Full-Duplex Single-Chip
     *        Ethernet Controller for ISA
     *
     *      - Am79c965A PCnet-32 Single-Chip 32-bit Ethernet Controller
     *        (for VESA and 486 local busses)
     *
     *      - Am79c970 PCnet-PCI Single-Chip Ethernet Controller for PCI
     *        Local Bus
     *
     *      - Am79c970A PCnet-PCI II Single-Chip Full-Duplex Ethernet Controller
     *        for PCI Local Bus
     *
     *      - Am79c971 PCnet-FAST Single-Chip Full-Duplex 10/100Mbps
     *        Ethernet Controller for PCI Local Bus
     *
     *      - Am79c972 PCnet-FAST+ Enhanced 10/100Mbps PCI Ethernet Controller
     *        with OnNow Support
     *
    *      - Am79c973/Am79c975 PCnet-FAST III Single-Chip 10/100Mbps PCI
    *        Ethernet Controller with Integrated PHY
    *
    *      - Am79c978 PCnet-Home Single-Chip 1/10 Mbps PCI Home
    *        Networking Controller.
    *
    * Initialization block, transmit descriptor, and receive descriptor
    * formats are described in two separate files:
    *
    *      16-bit software model (LANCE)           am7990reg.h
    *
    *      32-bit software model (ILACC)           am79900reg.h
    *
    * Note that the vast majority of the registers described in this file
    * belong to follow-on chips to the original LANCE.  Only CSR0-CSR3 are
    * valid on the LANCE.
    */
   
   /* $FreeBSD: releng/12.0/sys/dev/le/lancereg.h 326255 2017-11-27 14:52:40Z pfg $ */
   
   #ifndef _DEV_LE_LANCEREG_H_
   #define _DEV_LE_LANCEREG_H_
   
   #define LEBLEN          (ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN)
   /* LEMINSIZE should be ETHER_MIN_LEN when LE_MODE_DTCR is set. */
   #define LEMINSIZE       (ETHER_MIN_LEN - ETHER_CRC_LEN)
   
   #define LE_INITADDR(sc)         (sc->sc_initaddr)
   #define LE_RMDADDR(sc, bix)     (sc->sc_rmdaddr + sizeof(struct lermd) * (bix))
   #define LE_TMDADDR(sc, bix)     (sc->sc_tmdaddr + sizeof(struct letmd) * (bix))
   #define LE_RBUFADDR(sc, bix)    (sc->sc_rbufaddr + LEBLEN * (bix))
   #define LE_TBUFADDR(sc, bix)    (sc->sc_tbufaddr + LEBLEN * (bix))
   
   /*
    * The byte count fields in descriptors are in two's complement.
    * This macro does the conversion for us on unsigned numbers.
    */
   #define LE_BCNT(x)      (~(x) + 1)
   
   /*
    * Control and Status Register addresses
    */
   #define LE_CSR0         0x0000          /* Control and status register */
   #define LE_CSR1         0x0001          /* low address of init block */
   #define LE_CSR2         0x0002          /* high address of init block */
   #define LE_CSR3         0x0003          /* Bus master and control */
   #define LE_CSR4         0x0004          /* Test and features control */
   #define LE_CSR5         0x0005          /* Extended control and Interrupt 1 */
   #define LE_CSR6         0x0006          /* Rx/Tx Descriptor table length */
   #define LE_CSR7         0x0007          /* Extended control and interrupt 2 */
   #define LE_CSR8         0x0008          /* Logical Address Filter 0 */
   #define LE_CSR9         0x0009          /* Logical Address Filter 1 */
   #define LE_CSR10        0x000a          /* Logical Address Filter 2 */
   #define LE_CSR11        0x000b          /* Logical Address Filter 3 */
   #define LE_CSR12        0x000c          /* Physical Address 0 */
   #define LE_CSR13        0x000d          /* Physical Address 1 */
   #define LE_CSR14        0x000e          /* Physical Address 2 */
   #define LE_CSR15        0x000f          /* Mode */
   #define LE_CSR16        0x0010          /* Initialization Block addr lower */
   #define LE_CSR17        0x0011          /* Initialization Block addr upper */
   #define LE_CSR18        0x0012          /* Current Rx Buffer addr lower */
   #define LE_CSR19        0x0013          /* Current Rx Buffer addr upper */
   #define LE_CSR20        0x0014          /* Current Tx Buffer addr lower */
   #define LE_CSR21        0x0015          /* Current Tx Buffer addr upper */
   #define LE_CSR22        0x0016          /* Next Rx Buffer addr lower */
   #define LE_CSR23        0x0017          /* Next Rx Buffer addr upper */
   #define LE_CSR24        0x0018          /* Base addr of Rx ring lower */
   #define LE_CSR25        0x0019          /* Base addr of Rx ring upper */
   #define LE_CSR26        0x001a          /* Next Rx Desc addr lower */
   #define LE_CSR27        0x001b          /* Next Rx Desc addr upper */
   #define LE_CSR28        0x001c          /* Current Rx Desc addr lower */
   #define LE_CSR29        0x001d          /* Current Rx Desc addr upper */
   #define LE_CSR30        0x001e          /* Base addr of Tx ring lower */
   #define LE_CSR31        0x001f          /* Base addr of Tx ring upper */
   #define LE_CSR32        0x0020          /* Next Tx Desc addr lower */
   #define LE_CSR33        0x0021          /* Next Tx Desc addr upper */
   #define LE_CSR34        0x0022          /* Current Tx Desc addr lower */
   #define LE_CSR35        0x0023          /* Current Tx Desc addr upper */
   #define LE_CSR36        0x0024          /* Next Next Rx Desc addr lower */
   #define LE_CSR37        0x0025          /* Next Next Rx Desc addr upper */
   #define LE_CSR38        0x0026          /* Next Next Tx Desc addr lower */
   #define LE_CSR39        0x0027          /* Next Next Tx Desc adddr upper */
   #define LE_CSR40        0x0028          /* Current Rx Byte Count */
   #define LE_CSR41        0x0029          /* Current Rx Status */
   #define LE_CSR42        0x002a          /* Current Tx Byte Count */
   #define LE_CSR43        0x002b          /* Current Tx Status */
   #define LE_CSR44        0x002c          /* Next Rx Byte Count */
   #define LE_CSR45        0x002d          /* Next Rx Status */
   #define LE_CSR46        0x002e          /* Tx Poll Time Counter */
   #define LE_CSR47        0x002f          /* Tx Polling Interval */
   #define LE_CSR48        0x0030          /* Rx Poll Time Counter */
   #define LE_CSR49        0x0031          /* Rx Polling Interval */
   #define LE_CSR58        0x003a          /* Software Style */
   #define LE_CSR60        0x003c          /* Previous Tx Desc addr lower */
   #define LE_CSR61        0x003d          /* Previous Tx Desc addr upper */
   #define LE_CSR62        0x003e          /* Previous Tx Byte Count */
   #define LE_CSR63        0x003f          /* Previous Tx Status */
   #define LE_CSR64        0x0040          /* Next Tx Buffer addr lower */
   #define LE_CSR65        0x0041          /* Next Tx Buffer addr upper */
   #define LE_CSR66        0x0042          /* Next Tx Byte Count */
   #define LE_CSR67        0x0043          /* Next Tx Status */
   #define LE_CSR72        0x0048          /* Receive Ring Counter */
   #define LE_CSR74        0x004a          /* Transmit Ring Counter */
   #define LE_CSR76        0x004c          /* Receive Ring Length */
   #define LE_CSR78        0x004e          /* Transmit Ring Length */
   #define LE_CSR80        0x0050          /* DMA Transfer Counter and FIFO
                                              Threshold Control */
   #define LE_CSR82        0x0052          /* Tx Desc addr Pointer lower */
   #define LE_CSR84        0x0054          /* DMA addr register lower */
   #define LE_CSR85        0x0055          /* DMA addr register upper */
   #define LE_CSR86        0x0056          /* Buffer Byte Counter */
   #define LE_CSR88        0x0058          /* Chip ID Register lower */
   #define LE_CSR89        0x0059          /* Chip ID Register upper */
   #define LE_CSR92        0x005c          /* Ring Length Conversion */
   #define LE_CSR100       0x0064          /* Bus Timeout */
   #define LE_CSR112       0x0070          /* Missed Frame Count */
   #define LE_CSR114       0x0072          /* Receive Collision Count */
   #define LE_CSR116       0x0074          /* OnNow Power Mode Register */
   #define LE_CSR122       0x007a          /* Advanced Feature Control */
   #define LE_CSR124       0x007c          /* Test Register 1 */
   #define LE_CSR125       0x007d          /* MAC Enhanced Configuration Control */
   
   /*
    * Bus Configuration Register addresses
    */
   #define LE_BCR0         0x0000          /* Master Mode Read Active */
   #define LE_BCR1         0x0001          /* Master Mode Write Active */
   #define LE_BCR2         0x0002          /* Misc. Configuration */
   #define LE_BCR4         0x0004          /* LED0 Status */
   #define LE_BCR5         0x0005          /* LED1 Status */
   #define LE_BCR6         0x0006          /* LED2 Status */
   #define LE_BCR7         0x0007          /* LED3 Status */
   #define LE_BCR9         0x0009          /* Full-duplex Control */
   #define LE_BCR16        0x0010          /* I/O Base Address lower */
   #define LE_BCR17        0x0011          /* I/O Base Address upper */
   #define LE_BCR18        0x0012          /* Burst and Bus Control Register */
   #define LE_BCR19        0x0013          /* EEPROM Control and Status */
   #define LE_BCR20        0x0014          /* Software Style */
   #define LE_BCR22        0x0016          /* PCI Latency Register */
   #define LE_BCR23        0x0017          /* PCI Subsystem Vendor ID */
   #define LE_BCR24        0x0018          /* PCI Subsystem ID */
   #define LE_BCR25        0x0019          /* SRAM Size Register */
   #define LE_BCR26        0x001a          /* SRAM Boundary Register */
   #define LE_BCR27        0x001b          /* SRAM Interface Control Register */
   #define LE_BCR28        0x001c          /* Exp. Bus Port Addr lower */
   #define LE_BCR29        0x001d          /* Exp. Bus Port Addr upper */
   #define LE_BCR30        0x001e          /* Exp. Bus Data Port */
   #define LE_BCR31        0x001f          /* Software Timer Register */
   #define LE_BCR32        0x0020          /* PHY Control and Status Register */
   #define LE_BCR33        0x0021          /* PHY Address Register */
   #define LE_BCR34        0x0022          /* PHY Management Data Register */
   #define LE_BCR35        0x0023          /* PCI Vendor ID Register */
   #define LE_BCR36        0x0024          /* PCI Power Management Cap. Alias */
   #define LE_BCR37        0x0025          /* PCI DATA0 Alias */
   #define LE_BCR38        0x0026          /* PCI DATA1 Alias */
   #define LE_BCR39        0x0027          /* PCI DATA2 Alias */
   #define LE_BCR40        0x0028          /* PCI DATA3 Alias */
   #define LE_BCR41        0x0029          /* PCI DATA4 Alias */
   #define LE_BCR42        0x002a          /* PCI DATA5 Alias */
   #define LE_BCR43        0x002b          /* PCI DATA6 Alias */
   #define LE_BCR44        0x002c          /* PCI DATA7 Alias */
   #define LE_BCR45        0x002d          /* OnNow Pattern Matching 1 */
   #define LE_BCR46        0x002e          /* OnNow Pattern Matching 2 */
   #define LE_BCR47        0x002f          /* OnNow Pattern Matching 3 */
   #define LE_BCR48        0x0030          /* LED4 Status */
   #define LE_BCR49        0x0031          /* PHY Select */
   
   /* Control and status register 0 (csr0) */
   #define LE_C0_ERR       0x8000          /* error summary */
   #define LE_C0_BABL      0x4000          /* transmitter timeout error */
   #define LE_C0_CERR      0x2000          /* collision */
   #define LE_C0_MISS      0x1000          /* missed a packet */
   #define LE_C0_MERR      0x0800          /* memory error */
   #define LE_C0_RINT      0x0400          /* receiver interrupt */
   #define LE_C0_TINT      0x0200          /* transmitter interrupt */
   #define LE_C0_IDON      0x0100          /* initialization done */
   #define LE_C0_INTR      0x0080          /* interrupt condition */
   #define LE_C0_INEA      0x0040          /* interrupt enable */
   #define LE_C0_RXON      0x0020          /* receiver on */
   #define LE_C0_TXON      0x0010          /* transmitter on */
   #define LE_C0_TDMD      0x0008          /* transmit demand */
   #define LE_C0_STOP      0x0004          /* disable all external activity */
   #define LE_C0_STRT      0x0002          /* enable external activity */
   #define LE_C0_INIT      0x0001          /* begin initialization */
   
   #define LE_C0_BITS \
       "\2\20ERR\17BABL\16CERR\15MISS\14MERR\13RINT\
   \12TINT\11IDON\10INTR\07INEA\06RXON\05TXON\04TDMD\03STOP\02STRT\01INIT"
   
   /* Control and status register 3 (csr3) */
   #define LE_C3_BABLM     0x4000          /* babble mask */
   #define LE_C3_MISSM     0x1000          /* missed frame mask */
   #define LE_C3_MERRM     0x0800          /* memory error mask */
   #define LE_C3_RINTM     0x0400          /* receive interrupt mask */
   #define LE_C3_TINTM     0x0200          /* transmit interrupt mask */
   #define LE_C3_IDONM     0x0100          /* initialization done mask */
   #define LE_C3_DXSUFLO   0x0040          /* disable tx stop on underflow */
   #define LE_C3_LAPPEN    0x0020          /* look ahead packet processing enbl */
   #define LE_C3_DXMT2PD   0x0010          /* disable tx two part deferral */
   #define LE_C3_EMBA      0x0008          /* enable modified backoff algorithm */
   #define LE_C3_BSWP      0x0004          /* byte swap */
   #define LE_C3_ACON      0x0002          /* ALE control, eh? */
   #define LE_C3_BCON      0x0001          /* byte control */
   
   /* Control and status register 4 (csr4) */
   #define LE_C4_EN124     0x8000          /* enable CSR124 */
   #define LE_C4_DMAPLUS   0x4000          /* always set (PCnet-PCI) */
   #define LE_C4_TIMER     0x2000          /* enable bus activity timer */
   #define LE_C4_TXDPOLL   0x1000          /* disable transmit polling */
   #define LE_C4_APAD_XMT  0x0800          /* auto pad transmit */
   #define LE_C4_ASTRP_RCV 0x0400          /* auto strip receive */
   #define LE_C4_MFCO      0x0200          /* missed frame counter overflow */
   #define LE_C4_MFCOM     0x0100          /* missed frame coutner overflow mask */
   #define LE_C4_UINTCMD   0x0080          /* user interrupt command */
   #define LE_C4_UINT      0x0040          /* user interrupt */
   #define LE_C4_RCVCCO    0x0020          /* receive collision counter overflow */
   #define LE_C4_RCVCCOM   0x0010          /* receive collision counter overflow
                                              mask */
   #define LE_C4_TXSTRT    0x0008          /* transmit start status */
   #define LE_C4_TXSTRTM   0x0004          /* transmit start mask */
   
   /* Control and status register 5 (csr5) */
   #define LE_C5_TOKINTD   0x8000          /* transmit ok interrupt disable */
   #define LE_C5_LTINTEN   0x4000          /* last transmit interrupt enable */
   #define LE_C5_SINT      0x0800          /* system interrupt */
   #define LE_C5_SINTE     0x0400          /* system interrupt enable */
   #define LE_C5_EXDINT    0x0080          /* excessive deferral interrupt */
   #define LE_C5_EXDINTE   0x0040          /* excessive deferral interrupt enbl */
   #define LE_C5_MPPLBA    0x0020          /* magic packet physical logical
                                              broadcast accept */
   #define LE_C5_MPINT     0x0010          /* magic packet interrupt */
   #define LE_C5_MPINTE    0x0008          /* magic packet interrupt enable */
   #define LE_C5_MPEN      0x0004          /* magic packet enable */
   #define LE_C5_MPMODE    0x0002          /* magic packet mode */
   #define LE_C5_SPND      0x0001          /* suspend */
   
   /* Control and status register 6 (csr6) */
   #define LE_C6_TLEN      0xf000          /* TLEN from init block */
   #define LE_C6_RLEN      0x0f00          /* RLEN from init block */
   
   /* Control and status register 7 (csr7) */
   #define LE_C7_FASTSPNDE 0x8000          /* fast suspend enable */
   #define LE_C7_RDMD      0x2000          /* receive demand */
   #define LE_C7_RDXPOLL   0x1000          /* receive disable polling */
   #define LE_C7_STINT     0x0800          /* software timer interrupt */
   #define LE_C7_STINTE    0x0400          /* software timer interrupt enable */
   #define LE_C7_MREINT    0x0200          /* PHY management read error intr */
   #define LE_C7_MREINTE   0x0100          /* PHY management read error intr
                                              enable */
   #define LE_C7_MAPINT    0x0080          /* PHY management auto-poll intr */
   #define LE_C7_MAPINTE   0x0040          /* PHY management auto-poll intr
                                              enable */
   #define LE_C7_MCCINT    0x0020          /* PHY management command complete
                                              interrupt */
   #define LE_C7_MCCINTE   0x0010          /* PHY management command complete
                                              interrupt enable */
   #define LE_C7_MCCIINT   0x0008          /* PHY management command complete
                                              internal interrupt */
   #define LE_C7_MCCIINTE  0x0004          /* PHY management command complete
                                              internal interrupt enable */
   #define LE_C7_MIIPDTINT 0x0002          /* PHY management detect transition
                                              interrupt */
   #define LE_C7_MIIPDTINTE 0x0001         /* PHY management detect transition
                                              interrupt enable */
   
   /* Control and status register 15 (csr15) */
   #define LE_C15_PROM     0x8000          /* promiscuous mode */
   #define LE_C15_DRCVBC   0x4000          /* disable Rx of broadcast */
   #define LE_C15_DRCVPA   0x2000          /* disable Rx of physical address */
   #define LE_C15_DLNKTST  0x1000          /* disable link status */
   #define LE_C15_DAPC     0x0800          /* disable auto-polarity correction */
   #define LE_C15_MENDECL  0x0400          /* MENDEC Loopback mode */
   #define LE_C15_LRT      0x0200          /* low receive threshold (TMAU) */
   #define LE_C15_TSEL     0x0200          /* transmit mode select (AUI) */
   #define LE_C15_PORTSEL(x) ((x) << 7)    /* port select */
   #define LE_C15_INTL     0x0040          /* internal loopback */
   #define LE_C15_DRTY     0x0020          /* disable retry */
   #define LE_C15_FCOLL    0x0010          /* force collision */
   #define LE_C15_DXMTFCS  0x0008          /* disable Tx FCS (ADD_FCS overrides) */
   #define LE_C15_LOOP     0x0004          /* loopback enable */
   #define LE_C15_DTX      0x0002          /* disable transmit */
   #define LE_C15_DRX      0x0001          /* disable receiver */
   
   #define LE_PORTSEL_AUI  0
   #define LE_PORTSEL_10T  1
   #define LE_PORTSEL_GPSI 2
   #define LE_PORTSEL_MII  3
   #define LE_PORTSEL_MASK 3
   
   /* control and status register 80 (csr80) */
   #define LE_C80_RCVFW(x) ((x) << 12)     /* Receive FIFO Watermark */
   #define LE_C80_RCVFW_MAX 3
   #define LE_C80_XMTSP(x) ((x) << 10)     /* Transmit Start Point */
   #define LE_C80_XMTSP_MAX 3
   #define LE_C80_XMTFW(x) ((x) << 8)      /* Transmit FIFO Watermark */
   #define LE_C80_XMTFW_MAX 3
   #define LE_C80_DMATC    0x00ff          /* DMA transfer counter */
   
   /* control and status register 116 (csr116) */
   #define LE_C116_PME_EN_OVR 0x0400       /* PME_EN overwrite */
   #define LE_C116_LCDET      0x0200       /* link change detected */
   #define LE_C116_LCMODE     0x0100       /* link change wakeup mode */
   #define LE_C116_PMAT       0x0080       /* pattern matched */
   #define LE_C116_EMPPLBA    0x0040       /* magic packet physical logical
                                              broadcast accept */
   #define LE_C116_MPMAT      0x0020       /* magic packet match */
   #define LE_C116_MPPEN      0x0010       /* magic packet pin enable */
   #define LE_C116_RST_POL    0x0001       /* PHY_RST pin polarity */
   
   /* control and status register 122 (csr122) */
   #define LE_C122_RCVALGN 0x0001          /* receive packet align */
   
   /* control and status register 124 (csr124) */
   #define LE_C124_RPA     0x0008          /* runt packet accept */
   
   /* control and status register 125 (csr125) */
   #define LE_C125_IPG     0xff00          /* inter-packet gap */
   #define LE_C125_IFS1    0x00ff          /* inter-frame spacing part 1 */
   
   /* bus configuration register 0 (bcr0) */
   #define LE_B0_MSRDA     0xffff          /* reserved locations */
   
   /* bus configuration register 1 (bcr1) */
   #define LE_B1_MSWRA     0xffff          /* reserved locations */
   
   /* bus configuration register 2 (bcr2) */
   #define LE_B2_PHYSSELEN 0x2000          /* enable writes to BCR18[4:3] */
   #define LE_B2_LEDPE     0x1000          /* LED program enable */
   #define LE_B2_APROMWE   0x0100          /* Address PROM Write Enable */
   #define LE_B2_INTLEVEL  0x0080          /* 1 == edge triggered */
   #define LE_B2_DXCVRCTL  0x0020          /* DXCVR control */
   #define LE_B2_DXCVRPOL  0x0010          /* DXCVR polarity */
   #define LE_B2_EADISEL   0x0008          /* EADI select */
   #define LE_B2_AWAKE     0x0004          /* power saving mode select */
   #define LE_B2_ASEL      0x0002          /* auto-select PORTSEL */
   #define LE_B2_XMAUSEL   0x0001          /* reserved location */
   
   /* bus configuration register 4 (bcr4) */
   /* bus configuration register 5 (bcr5) */
   /* bus configuration register 6 (bcr6) */
   /* bus configuration register 7 (bcr7) */
   /* bus configuration register 48 (bcr48) */
   #define LE_B4_LEDOUT    0x8000          /* LED output active */
   #define LE_B4_LEDPOL    0x4000          /* LED polarity */
   #define LE_B4_LEDDIS    0x2000          /* LED disable */
   #define LE_B4_100E      0x1000          /* 100Mb/s enable */
   #define LE_B4_MPSE      0x0200          /* magic packet status enable */
   #define LE_B4_FDLSE     0x0100          /* full-duplex link status enable */
   #define LE_B4_PSE       0x0080          /* pulse stretcher enable */
   #define LE_B4_LNKSE     0x0040          /* link status enable */
   #define LE_B4_RCVME     0x0020          /* receive match status enable */
   #define LE_B4_XMTE      0x0010          /* transmit status enable */
   #define LE_B4_POWER     0x0008          /* power enable */
   #define LE_B4_RCVE      0x0004          /* receive status enable */
   #define LE_B4_SPEED     0x0002          /* high speed enable */
   #define LE_B4_COLE      0x0001          /* collision status enable */
   
   /* bus configuration register 9 (bcr9) */
   #define LE_B9_FDRPAD    0x0004          /* full-duplex runt packet accept
                                              disable */
   #define LE_B9_AUIFD     0x0002          /* AUI full-duplex */
   #define LE_B9_FDEN      0x0001          /* full-duplex enable */
   
   /* bus configuration register 18 (bcr18) */
   #define LE_B18_ROMTMG   0xf000          /* expansion rom timing */
   #define LE_B18_NOUFLO   0x0800          /* no underflow on transmit */
   #define LE_B18_MEMCMD   0x0200          /* memory read multiple enable */
   #define LE_B18_EXTREQ   0x0100          /* extended request */
   #define LE_B18_DWIO     0x0080          /* double-word I/O */
   #define LE_B18_BREADE   0x0040          /* burst read enable */
   #define LE_B18_BWRITE   0x0020          /* burst write enable */
   #define LE_B18_PHYSEL1  0x0010          /* PHYSEL 1 */
   #define LE_B18_PHYSEL0  0x0008          /* PHYSEL 0 */
                                           /*      00      ex ROM/Flash    */
                                           /*      01      EADI/MII snoop  */
                                           /*      10      reserved        */
                                           /*      11      reserved        */
   #define LE_B18_LINBC    0x0007          /* reserved locations */
   
   /* bus configuration register 19 (bcr19) */
   #define LE_B19_PVALID   0x8000          /* EEPROM status valid */
   #define LE_B19_PREAD    0x4000          /* EEPROM read command */
   #define LE_B19_EEDET    0x2000          /* EEPROM detect */
   #define LE_B19_EEN      0x0010          /* EEPROM port enable */
   #define LE_B19_ECS      0x0004          /* EEPROM chip select */
   #define LE_B19_ESK      0x0002          /* EEPROM serial clock */
   #define LE_B19_EDI      0x0001          /* EEPROM data in */
   #define LE_B19_EDO      0x0001          /* EEPROM data out */
   
   /* bus configuration register 20 (bcr20) */
   #define LE_B20_APERREN  0x0400          /* Advanced parity error handling */
   #define LE_B20_CSRPCNET 0x0200          /* PCnet-style CSRs (0 = ILACC) */
   #define LE_B20_SSIZE32  0x0100          /* Software Size 32-bit */
   #define LE_B20_SSTYLE   0x0007          /* Software Style */
   #define LE_B20_SSTYLE_LANCE     0       /* LANCE/PCnet-ISA (16-bit) */
   #define LE_B20_SSTYLE_ILACC     1       /* ILACC (32-bit) */
   #define LE_B20_SSTYLE_PCNETPCI2 2       /* PCnet-PCI (32-bit) */
   #define LE_B20_SSTYLE_PCNETPCI3 3       /* PCnet-PCI II (32-bit) */
   
   /* bus configuration register 25 (bcr25) */
   #define LE_B25_SRAM_SIZE  0x00ff        /* SRAM size */
   
   /* bus configuration register 26 (bcr26) */
   #define LE_B26_SRAM_BND   0x00ff        /* SRAM boundary */
   
   /* bus configuration register 27 (bcr27) */
   #define LE_B27_PTRTST   0x8000          /* reserved for manuf. tests */
   #define LE_B27_LOLATRX  0x4000          /* low latency receive */
   #define LE_B27_EBCS     0x0038          /* expansion bus clock source */
                                           /*      000     CLK pin         */
                                           /*      001     time base clock */
                                           /*      010     EBCLK pin       */
                                           /*      011     reserved        */
                                           /*      1xx     reserved        */
   #define LE_B27_CLK_FAC  0x0007          /* clock factor */
                                           /*      000     1               */
                                           /*      001     1/2             */
                                           /*      010     reserved        */
                                           /*      011     1/4             */
                                           /*      1xx     reserved        */
   
   /* bus configuration register 28 (bcr28) */
   #define LE_B28_EADDRL   0xffff          /* expansion port address lower */
   
   /* bus configuration register 29 (bcr29) */
   #define LE_B29_FLASH    0x8000          /* flash access */
   #define LE_B29_LAAINC   0x4000          /* lower address auto increment */
   #define LE_B29_EPADDRU  0x0007          /* expansion port address upper */
   
   /* bus configuration register 30 (bcr30) */
   #define LE_B30_EBDATA   0xffff          /* expansion bus data port */
   
   /* bus configuration register 31 (bcr31) */
   #define LE_B31_STVAL    0xffff          /* software timer value */
   
   /* bus configuration register 32 (bcr32) */
   #define LE_B32_ANTST    0x8000          /* reserved for manuf. tests */
   #define LE_B32_MIIPD    0x4000          /* MII PHY Detect (manuf. tests) */
   #define LE_B32_FMDC     0x3000          /* fast management data clock */
   #define LE_B32_APEP     0x0800          /* auto-poll PHY */
   #define LE_B32_APDW     0x0700          /* auto-poll dwell time */
   #define LE_B32_DANAS    0x0080          /* disable autonegotiation */
   #define LE_B32_XPHYRST  0x0040          /* PHY reset */
   #define LE_B32_XPHYANE  0x0020          /* PHY autonegotiation enable */
   #define LE_B32_XPHYFD   0x0010          /* PHY full-duplex */
   #define LE_B32_XPHYSP   0x0008          /* PHY speed */
   #define LE_B32_MIIILP   0x0002          /* MII internal loopback */
   
   /* bus configuration register 33 (bcr33) */
   #define LE_B33_SHADOW   0x8000          /* shadow enable */
   #define LE_B33_MII_SEL  0x4000          /* MII selected */
   #define LE_B33_ACOMP    0x2000          /* internal PHY autonegotiation comp */
   #define LE_B33_LINK     0x1000          /* link status */
   #define LE_B33_FDX      0x0800          /* full-duplex */
   #define LE_B33_SPEED    0x0400          /* 1 == high speed */
   #define LE_B33_PHYAD    0x03e0          /* PHY address */
   #define PHYAD_SHIFT     5
   #define LE_B33_REGAD    0x001f          /* register address */
   
   /* bus configuration register 34 (bcr34) */
   #define LE_B34_MIIMD    0xffff          /* MII data */
   
   /* bus configuration register 49 (bcr49) */
   #define LE_B49_PCNET    0x8000          /* PCnet mode - Must Be One */
   #define LE_B49_PHYSEL_D 0x0300          /* PHY_SEL_Default */
   #define LE_B49_PHYSEL_L 0x0010          /* PHY_SEL_Lock */
   #define LE_B49_PHYSEL   0x0003          /* PHYSEL */
                                           /*      00      10baseT PHY     */
                                           /*      01      HomePNA PHY     */
                                           /*      10      external PHY    */
                                           /*      11      reserved        */
   
   /* Initialization block (mode) */
   #define LE_MODE_PROM    0x8000          /* promiscuous mode */
   /*                      0x7f80             reserved, must be zero */
   /* 0x4000 - 0x0080 are not available on LANCE 7990. */
   #define LE_MODE_DRCVBC  0x4000          /* disable receive brodcast */
   #define LE_MODE_DRCVPA  0x2000          /* disable physical address detection */
   #define LE_MODE_DLNKTST 0x1000          /* disable link status */
   #define LE_MODE_DAPC    0x0800          /* disable automatic polarity correction */
   #define LE_MODE_MENDECL 0x0400          /* MENDEC loopback mode */
   #define LE_MODE_LRTTSEL 0x0200          /* lower receive threshold /
                                              transmit mode selection */
   #define LE_MODE_PSEL1   0x0100          /* port selection bit1 */
   #define LE_MODE_PSEL0   0x0080          /* port selection bit0 */
   #define LE_MODE_INTL    0x0040          /* internal loopback */
   #define LE_MODE_DRTY    0x0020          /* disable retry */
   #define LE_MODE_COLL    0x0010          /* force a collision */
   #define LE_MODE_DTCR    0x0008          /* disable transmit CRC */
   #define LE_MODE_LOOP    0x0004          /* loopback mode */
   #define LE_MODE_DTX     0x0002          /* disable transmitter */
   #define LE_MODE_DRX     0x0001          /* disable receiver */
   #define LE_MODE_NORMAL  0               /* none of the above */
   
   /*
    * Chip ID (CSR88 IDL, CSR89 IDU) values for various AMD PCnet parts
    */
   #define CHIPID_MANFID(x)        (((x) >> 1) & 0x3ff)
   #define CHIPID_PARTID(x)        (((x) >> 12) & 0xffff)
   #define CHIPID_VER(x)           (((x) >> 28) & 0x7)
   
   #define PARTID_Am79c960         0x0003
   #define PARTID_Am79c961         0x2260
   #define PARTID_Am79c961A        0x2261
   #define PARTID_Am79c965         0x2430  /* yes, these... */
   #define PARTID_Am79c970         0x2430  /* ...are the same */
   #define PARTID_Am79c970A        0x2621
   #define PARTID_Am79c971         0x2623
   #define PARTID_Am79c972         0x2624
   #define PARTID_Am79c973         0x2625
   #define PARTID_Am79c978         0x2626
   #define PARTID_Am79c975         0x2627
   #define PARTID_Am79c976         0x2628
   
   #endif  /* !_DEV_LE_LANCEREG_H_ */

Cache object: 483e4f4daf1c96e95f3228dfa6d82419