FreeBSD/Linux Kernel Cross Reference
sys/dev/mii/bmtphyreg.h

     /*-
      * Copyright (c) 2001 The NetBSD Foundation, Inc.
      * All rights reserved.
      *
      * This code is derived from software contributed to The NetBSD Foundation
      * by Jason R. Thorpe.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. All advertising materials mentioning features or use of this software
     *    must display the following acknowledgement:
     *      This product includes software developed by the NetBSD
     *      Foundation, Inc. and its contributors.
     * 4. Neither the name of The NetBSD Foundation nor the names of its
     *    contributors may be used to endorse or promote products derived
     *    from this software without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     * POSSIBILITY OF SUCH DAMAGE.
     *
     *      from NetBSD: bmtphyreg.h,v 1.1 2001/06/02 21:42:10 thorpej Exp
     *
     * $FreeBSD$
     */
    
    #ifndef _DEV_MII_BMTPHYREG_H_
    #define _DEV_MII_BMTPHYREG_H_
    
    /*
     * BCM5201/BCM5202 registers.
     */
    
    #define MII_BMTPHY_AUX_CTL      0x10    /* auxiliary control */
    #define AUX_CTL_TXDIS           0x2000  /* transmitter disable */
    #define AUX_CTL_4B5B_BYPASS     0x0400  /* bypass 4b5b encoder */
    #define AUX_CTL_SCR_BYPASS      0x0200  /* bypass scrambler */
    #define AUX_CTL_NRZI_BYPASS     0x0100  /* bypass NRZI encoder */
    #define AUX_CTL_RXALIGN_BYPASS  0x0080  /* bypass rx symbol alignment */
    #define AUX_CTL_BASEWANDER_DIS  0x0040  /* disable baseline wander correction */
    #define AUX_CTL_FEF_EN          0x0020  /* far-end fault enable */
    
    
    #define MII_BMTPHY_AUX_STS      0x11    /* auxiliary status */
    #define AUX_STS_FX_MODE         0x0400  /* 100base-FX mode (strap pin) */
    #define AUX_STS_LOCKED          0x0200  /* descrambler locked */
    #define AUX_STS_100BASE_LINK    0x0100  /* 1 = 100base link */
    #define AUX_STS_REMFAULT        0x0080  /* remote fault */
    #define AUX_STS_DISCON_STATE    0x0040  /* disconnect state */
    #define AUX_STS_FCARDET         0x0020  /* false carrier detected */
    #define AUX_STS_BAD_ESD         0x0010  /* bad ESD detected */
    #define AUX_STS_RXERROR         0x0008  /* Rx error detected */
    #define AUX_STS_TXERROR         0x0004  /* Tx error detected */
    #define AUX_STS_LOCKERROR       0x0002  /* lock error detected */
    #define AUX_STS_MLT3ERROR       0x0001  /* MLT3 code error detected */
    
    
    #define MII_BMTPHY_RXERROR_CTR  0x12    /* 100base-X Rx error counter */
    #define RXERROR_CTR_MASK        0x00ff
    
    
    #define MII_BMTPHY_FCS_CTR      0x13    /* 100base-X false carrier counter */
    #define FCS_CTR_MASK            0x00ff
    
    
    #define MII_BMTPHY_DIS_CTR      0x14    /* 100base-X disconnect counter */
    #define DIS_CTR_MASK            0x00ff
    
    
    #define MII_BMTPHY_PTEST        0x17    /* PTEST */
    
    
    #define MII_BMTPHY_AUX_CSR      0x18    /* auxiliary control/status */
    #define AUX_CSR_JABBER_DIS      0x8000  /* jabber disable */
    #define AUX_CSR_FLINK           0x4000  /* force 10baseT link pass */
    #define AUX_CSR_HSQ             0x0080  /* SQ high */
    #define AUX_CSR_LSQ             0x0040  /* SQ low */
    #define AUX_CSR_ER1             0x0020  /* edge rate 1 */
    #define AUX_CSR_ER0             0x0010  /* edge rate 0 */
    #define AUX_CSR_ANEG            0x0008  /* auto-negotiation activated */
    #define AUX_CSR_F100            0x0004  /* force 100base */
    #define AUX_CSR_SPEED           0x0002  /* 1 = 100, 0 = 10 */
    #define AUX_CSR_FDX             0x0001  /* full-duplex */
    
    
   #define MII_BMTPHY_AUX_SS       0x19    /* auxiliary status summary */
   #define AUX_SS_ACOMP            0x8000  /* auto-negotiation complete */
   #define AUX_SS_ACOMP_ACK        0x4000  /* auto-negotiation compl. ack */
   #define AUX_SS_AACK_DET         0x2000  /* auto-neg. ack detected */
   #define AUX_SS_ANLPAD           0x1000  /* auto-neg. link part. ability det */
   #define AUX_SS_ANEG_PAUSE       0x0800  /* pause operation bit */
   #define AUX_SS_HCD              0x0700  /* highest common denominator */
   #define AUX_SS_HCD_NONE         0x0000  /*    none */
   #define AUX_SS_HCD_10T          0x0100  /*    10baseT */
   #define AUX_SS_HCD_10T_FDX      0x0200  /*    10baseT-FDX */
   #define AUX_SS_HCD_100TX        0x0300  /*    100baseTX-FDX */
   #define AUX_SS_HCD_100T4        0x0400  /*    100baseT4 */
   #define AUX_SS_HCD_100TX_FDX    0x0500  /*    100baseTX-FDX */
   #define AUX_SS_PDF              0x0080  /* parallel detection fault */
   #define AUX_SS_LPRF             0x0040  /* link partner remote fault */
   #define AUX_SS_LPPR             0x0020  /* link partner page received */
   #define AUX_SS_LPANA            0x0010  /* link partner auto-neg able */
   #define AUX_SS_SPEED            0x0008  /* 1 = 100, 0 = 10 */
   #define AUX_SS_LINK             0x0004  /* link pass */
   #define AUX_SS_ANEN             0x0002  /* auto-neg. enabled */
   #define AUX_SS_JABBER           0x0001  /* jabber detected */
   
   
   #define MII_BMTPHY_INTR         0x1a    /* interrupt register */
   #define INTR_FDX_LED            0x8000  /* full-duplex led enable */
   #define INTR_INTR_EN            0x4000  /* interrupt enable */
   #define INTR_FDX_MASK           0x0800  /* full-dupled intr mask */
   #define INTR_SPD_MASK           0x0400  /* speed intr mask */
   #define INTR_LINK_MASK          0x0200  /* link intr mask */
   #define INTR_INTR_MASK          0x0100  /* master interrupt mask */
   #define INTR_FDX_CHANGE         0x0008  /* full-duplex change */
   #define INTR_SPD_CHANGE         0x0004  /* speed change */
   #define INTR_LINK_CHANGE        0x0002  /* link change */
   #define INTR_INTR_STATUS        0x0001  /* interrupt status */
   
   
   #define MII_BMTPHY_AUX2         0x1b    /* auliliary mode 2 */
   #define AUX2_BLOCK_RXDV         0x0200  /* block RXDV mode enabled */
   #define AUX2_ANPDQ              0x0100  /* auto-neg parallel detection Q mode */
   #define AUX2_TRAFFIC_LED        0x0040  /* traffic meter led enable */
   #define AUX2_FXMTRCV_LED        0x0020  /* force Tx and Rx LEDs */
   #define AUX2_HS_TOKEN           0x0010  /* high-speed token ring mode */
   #define AUX2_AUTO_LP            0x0008  /* auto low-power mode */
   #define AUX2_TWOLINK_LED        0x0004  /* two link LEDs */
   #define AUX2_SQE_DIS            0x0002  /* disable SQE pulse */
   
   
   #define MII_BMTPHY_AUXERR       0x1c    /* auxiliary error */
   #define AUXERR_MANCHESTER       0x0400  /* Manchester code error */
   #define AUXERR_EOF              0x0200  /* EOF detection error */
   #define AUXERR_POLARITY         0x0100  /* polarity inversion */
   #define AUXERR_ANEG             0x0008  /* autonegotiation enabled */
   #define AUXERR_F100             0x0004  /* force 100base */
   #define AUXERR_SPEED            0x0002  /* 1 = 100, 0 = 10 */
   #define AUXERR_FDX              0x0001  /* full-duplex */
   
   
   #define MII_BMTPHY_AUXMODE      0x1d    /* auxiliary mode */
   #define AUXMODE_ACT_LED_DIS     0x0010  /* activity LED disable */
   #define AUXMODE_LINK_LED_DIS    0x0008  /* link LED disable */
   #define AUXMODE_BLOCK_TXEN      0x0002  /* enable block TXEN */
   
   
   #define MII_BMTPHY_AUXMPHY      0x1e    /* auxiliary multiple phy register */
   #define AUXMPHY_HCD_TX_FDX      0x8000  /* res. is 100baseTX-FDX */
   #define AUXMPHY_HCD_T4          0x4000  /* res. is 100baseT4 */
   #define AUXMPHY_HCD_TX          0x2000  /* res. is 100baseTX */
   #define AUXMPHY_HCD_10T_FDX     0x1000  /* res. is 10baseT-FDX */
   #define AUXMPHY_HCD_10T         0x0800  /* res. is 10baseT */
   #define AUXMPHY_RES_ANEG        0x0100  /* restart auto-negotiation */
   #define AUXMPHY_ANEG_COMP       0x0080  /* auto-negotiation complete */
   #define AUXMPHY_ACK_COMP        0x0040  /* acknowledge complete */
   #define AUXMPHY_ACK_DET         0x0020  /* acknowledge detected */
   #define AUXMPHY_ABILITY_DET     0x0010  /* waiting for LP ability */
   #define AUXMPHY_SUPER_ISO       0x0008  /* super-isolate mode */
   #define AUXMPHY_10T_SERIAL      0x0002  /* 10baseT serial mode */
   
   
   #define MII_BMTPHY_TEST         0x1d    /* Broadcom test register */
   
   
   #endif /* _DEV_MII_BMTPHYREG_H_ */

Cache object: f1687af64e09cc9c992481d5e104976d