1 /* $NetBSD: icsphyreg.h,v 1.2 2003/07/01 22:46:08 msaitoh Exp $ */
2
3 /*-
4 * Copyright (c) 1998 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
9 * NASA Ames Research Center.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. All advertising materials mentioning features or use of this software
20 * must display the following acknowledgement:
21 * This product includes software developed by the NetBSD
22 * Foundation, Inc. and its contributors.
23 * 4. Neither the name of The NetBSD Foundation nor the names of its
24 * contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGE.
38 */
39
40 #ifndef _DEV_MII_ICSPHYREG_H_
41 #define _DEV_MII_ICSPHYREG_H_
42
43 /*
44 * ICS1890 registers.
45 * http://www.icst.com/pdf/18??.pdf
46 */
47
48 /* HEX 1889 1890 1892 1893
49 *--------------------------------------------------------------
50 * 0 Control * * * *
51 * 1 Status * * * *
52 * 2 PHY Identifier * * * *
53 * 3 PHY Identifier * * * *
54 * 4 Auto-Neg. Advertisement * * *
55 * 5 Auto-Neg. Link Parent Adv * * *
56 * 6 Auto-Neg. Expansion * * *
57 * 7 Auto-Neg. Next Page Tx * *
58 * 8 ANg Nxt Page Lnk Parnt Abl * *
59 * 10 Extended Control * * * *
60 * 11 Quick Poll Status * * * *
61 * 12 10Base-T Operation * * *
62 * 13 Extended Control2 * * *
63 */
64
65 #define MII_ICSPHY_ECR 0x10 /* Extended Control Register */
66 #define ECR_OVR 0x8000 /* disable command reg overwrites */
67 #define ECR_PHYADDR_MASK 0x07c0 /* PHY address mask */
68 #define ECR_CTEST 0x0020 /* Stream Cipher Test Mode */
69 #define ECR_IECT 0x0004 /* Invalid Error Code Test */
70 #define ECR_SSD 0x0001 /* Stream Cipher Disable */
71
72 #define MII_ICSPHY_QPR 0x11 /* Quick Poll Register */
73 #define QPR_SPEED 0x8000 /* 100Mbps */
74 #define QPR_FDX 0x4000 /* Full dupled */
75 #define QPR_ANB2 0x2000 /* Autoneg monitor bit 2 */
76 #define QPR_ANB1 0x1000 /* Autoneg monitor bit 1 */
77 #define QPR_ANB0 0x0800 /* Autoneg monitor bit 0 */
78 #define QPR_RXERR 0x0400 /* Receive signal lost */
79 #define QPR_PLLERR 0x0200 /* PLL error */
80 #define QPR_FCARR 0x0100 /* False carrier detected */
81 #define QPR_INVALSYM 0x0080 /* Invalid Symbol Detected */
82 #define QPR_HALT 0x0040 /* Halt Symbol Detected */
83 #define QPR_PREEM 0x0020 /* Two Idle Symbols together */
84 #define QPR_ACOMP 0x0010 /* Autonegotiation complete */
85 #define QPR_SDETECT 0x0008 /* signal detect */
86 #define QPR_JABBER 0x0004 /* Jabber detected */
87 #define QPR_RFAULT 0x0002 /* Remote Fault */
88 #define QPR_LINK 0x0001 /* Link */
89
90 #define MII_ICSPHY_TTR 0x12 /* 10baseT Operations Register */
91 #define TTR_RJABBER 0x8000 /* Remote Jabber */
92 #define TTR_POLARITY 0x4000 /* Polarity Reversed */
93 #define TTR_NOJABBER 0x0020 /* Disable Jabber Check */
94 #define TTR_LOOP 0x0010 /* Loopback mode */
95 #define TTR_NOAPOLARITY 0x0008 /* Disable auto polarity correction */
96 #define TTR_NOSQE 0x0004 /* Disable SQE check */
97 #define TTR_NOLINK 0x0002 /* Disable Link check */
98 #define TTR_NOSQUELCH 0x0001 /* Disable squelch */
99
100
101 /*
102 * Extended Control Register 2
103 *
104 * HEX 1889 1890 1892 1893
105 *-------------------------------------------------------------------
106 * 8000 Node/Repeater Mode * * *
107 * 4000 Hardware/Software Mode * * *
108 * 2000 Link Partner Support Remote Flt *
109 * 2000 Remote Fault * *
110 * 1000
111 * 0800
112 * 0400 Xmitted Remote Fault status *
113 * 0200
114 * 0100
115 * 0080 Tri-state Enable *
116 * 0040
117 * 0020
118 * 0010 A-N Powerup Remote Flt *
119 * 0008
120 * 0004
121 * 0002 Automatic 10Base-T Power Down *
122 * 0001 Automatic 100Base-TX Power Down * * *
123 */
124
125 #define MII_ICSPHY_ECR2 0x13 /* Extended Control Register 2 */
126 #define ECR2_REPEATER 0x8000 /* Repeater Mode */
127 #define ECR2_HWSW 0x4000 /* hw/sw config priority */
128 #define ECR2_LPRF 0x2000 /* link partner supports rem fault */
129 #define ECR2_FORCERF 0x0400 /* Force transmit of rem fault */
130 #define ECR2_RFPUP 0x0010 /* A-N Powerup Remote fault */
131 #define ECR2_10AUTOPWRDN 0x0002 /* Automatic 10baseT power down */
132 #define ECR2_100AUTOPWRDN 0x0001 /* Automatic 100baseTX power down */
133
134 #endif /* _DEV_MII_ICSPHYREG_H_ */
Cache object: bbd684a01d1bea838ec8abbd75e9babd
|