FreeBSD/Linux Kernel Cross Reference
sys/dev/mii/jmphyreg.h

     /*-
      * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
      *
      * Copyright (c) 2008, Pyun YongHyeon
      * All rights reserved.
      *              
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
      * are met:             
     * 1. Redistributions of source code must retain the above copyright
     *    notice unmodified, this list of conditions, and the following
     *    disclaimer.  
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     *
     * $FreeBSD$
     */
    
    #ifndef _DEV_MII_JMPHYREG_H_
    #define _DEV_MII_JMPHYREG_H_
    
    /*
     * Registers for the JMicron JMC250 Gigabit PHY.
     */
    
    /* PHY specific status register. */
    #define JMPHY_SSR                       0x11
    #define JMPHY_SSR_SPEED_1000            0x8000
    #define JMPHY_SSR_SPEED_100             0x4000
    #define JMPHY_SSR_SPEED_10              0x0000
    #define JMPHY_SSR_SPEED_MASK            0xC000
    #define JMPHY_SSR_DUPLEX                0x2000
    #define JMPHY_SSR_SPD_DPLX_RESOLVED     0x0800
    #define JMPHY_SSR_LINK_UP               0x0400
    #define JMPHY_SSR_MDI_XOVER             0x0040
    #define JMPHY_SSR_INV_POLARITY          0x0002
    
    /* PHY specific cable length status register. */
    #define JMPHY_SCL                       0x17
    #define JMPHY_SCL_CHAN_D_MASK           0xF000
    #define JMPHY_SCL_CHAN_C_MASK           0x0F00
    #define JMPHY_SCL_CHAN_B_MASK           0x00F0
    #define JMPHY_SCL_CHAN_A_MASK           0x000F
    #define JMPHY_SCL_LEN_35                0
    #define JMPHY_SCL_LEN_40                1
    #define JMPHY_SCL_LEN_50                2
    #define JMPHY_SCL_LEN_60                3
    #define JMPHY_SCL_LEN_70                4
    #define JMPHY_SCL_LEN_80                5
    #define JMPHY_SCL_LEN_90                6
    #define JMPHY_SCL_LEN_100               7
    #define JMPHY_SCL_LEN_110               8
    #define JMPHY_SCL_LEN_120               9
    #define JMPHY_SCL_LEN_130               10
    #define JMPHY_SCL_LEN_140               11
    #define JMPHY_SCL_LEN_150               12
    #define JMPHY_SCL_LEN_160               13
    #define JMPHY_SCL_LEN_170               14
    #define JMPHY_SCL_RSVD                  15
    
    /* PHY specific LED control register 1. */
    #define JMPHY_LED_CTL1                  0x18
    #define JMPHY_LED_BLINK_42MS            0x0000
    #define JMPHY_LED_BLINK_84MS            0x2000
    #define JMPHY_LED_BLINK_170MS           0x4000
    #define JMPHY_LED_BLINK_340MS           0x6000
    #define JMPHY_LED_BLINK_670MS           0x8000
    #define JMPHY_LED_BLINK_MASK            0xE000
    #define JMPHY_LED_FLP_GAP_MASK          0x1F00
    #define JMPHY_LED_FLP_GAP_DEFULT        0x1000
    #define JMPHY_LED2_POLARITY_MASK        0x0030
    #define JMPHY_LED1_POLARITY_MASK        0x000C
    #define JMPHY_LED0_POLARITY_MASK        0x0003
    #define JMPHY_LED_ON_LO_OFF_HI          0
    #define JMPHY_LED_ON_HI_OFF_HI          1
    #define JMPHY_LED_ON_LO_OFF_TS          2
    #define JMPHY_LED_ON_HI_OFF_TS          3
    
    /* PHY specific LED control register 2. */
    #define JMPHY_LED_CTL2                  0x19
    #define JMPHY_LED_NO_STRETCH            0x0000
    #define JMPHY_LED_STRETCH_42MS          0x2000
    #define JMPHY_LED_STRETCH_84MS          0x4000
    #define JMPHY_LED_STRETCH_170MS         0x6000
    #define JMPHY_LED_STRETCH_340MS         0x8000
    #define JMPHY_LED_STRETCH_670MS         0xB000
   #define JMPHY_LED_STRETCH_1300MS        0xC000
   #define JMPHY_LED_STRETCH_2700MS        0xE000
   #define JMPHY_LED2_MODE_MASK            0x0F00
   #define JMPHY_LED1_MODE_MASK            0x00F0
   #define JMPHY_LED0_MODE_MASK            0x000F
   
   /* PHY specific test mode control register. */
   #define JMPHY_TMCTL                     0x1A
   #define JMPHY_TMCTL_SLEEP_ENB           0x1000
   
   /* PHY specific configuration register. */
   #define JMPHY_SPEC_ADDR                 0x1E
   #define JMPHY_SPEC_ADDR_READ            0x4000
   #define JMPHY_SPEC_ADDR_WRITE           0x8000
   
   #define JMPHY_SPEC_DATA                 0x1F
   
   #define JMPHY_EXT_COMM_2                0x32
   
   #endif  /* _DEV_MII_JMPHYREG_H_ */

Cache object: ac7c2da74b36af04ef3754a86c53d088