FreeBSD/Linux Kernel Cross Reference
sys/dev/mii/mii.h
1 /* $NetBSD: mii.h,v 1.10 2001/07/25 22:00:43 thorpej Exp $ */
2
3 /*
4 * Copyright (c) 1997 Manuel Bouyer. All rights reserved.
5 *
6 * Modification to match BSD/OS 3.0 MII interface by Jason R. Thorpe,
7 * Numerical Aerospace Simulation Facility, NASA Ames Research Center.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. All advertising materials mentioning features or use of this software
18 * must display the following acknowledgement:
19 * This product includes software developed by Manuel Bouyer.
20 * 4. The name of the author may not be used to endorse or promote products
21 * derived from this software without specific prior written permission.
22 *
23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
24 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
25 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
26 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
32 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35 #ifndef _DEV_MII_MII_H_
36 #define _DEV_MII_MII_H_
37
38 /*
39 * Registers common to all PHYs.
40 */
41
42 #define MII_NPHY 32 /* max # of PHYs per MII */
43
44 /*
45 * MII commands, used if a device must drive the MII lines
46 * manually.
47 */
48 #define MII_COMMAND_START 0x01
49 #define MII_COMMAND_READ 0x02
50 #define MII_COMMAND_WRITE 0x01
51 #define MII_COMMAND_ACK 0x02
52
53 #define MII_BMCR 0x00 /* Basic mode control register (rw) */
54 #define BMCR_RESET 0x8000 /* reset */
55 #define BMCR_LOOP 0x4000 /* loopback */
56 #define BMCR_SPEED0 0x2000 /* speed selection (LSB) */
57 #define BMCR_AUTOEN 0x1000 /* autonegotiation enable */
58 #define BMCR_PDOWN 0x0800 /* power down */
59 #define BMCR_ISO 0x0400 /* isolate */
60 #define BMCR_STARTNEG 0x0200 /* restart autonegotiation */
61 #define BMCR_FDX 0x0100 /* Set duplex mode */
62 #define BMCR_CTEST 0x0080 /* collision test */
63 #define BMCR_SPEED1 0x0040 /* speed selection (MSB) */
64
65 #define BMCR_S10 0x0000 /* 10 Mb/s */
66 #define BMCR_S100 BMCR_SPEED0 /* 100 Mb/s */
67 #define BMCR_S1000 BMCR_SPEED1 /* 1000 Mb/s */
68
69 #define BMCR_SPEED(x) ((x) & (BMCR_SPEED0|BMCR_SPEED1))
70
71 #define MII_BMSR 0x01 /* Basic mode status register (ro) */
72 #define BMSR_100T4 0x8000 /* 100 base T4 capable */
73 #define BMSR_100TXFDX 0x4000 /* 100 base Tx full duplex capable */
74 #define BMSR_100TXHDX 0x2000 /* 100 base Tx half duplex capable */
75 #define BMSR_10TFDX 0x1000 /* 10 base T full duplex capable */
76 #define BMSR_10THDX 0x0800 /* 10 base T half duplex capable */
77 #define BMSR_100T2FDX 0x0400 /* 100 base T2 full duplex capable */
78 #define BMSR_100T2HDX 0x0200 /* 100 base T2 half duplex capable */
79 #define BMSR_EXTSTAT 0x0100 /* Extended status in register 15 */
80 #define BMSR_MFPS 0x0040 /* MII Frame Preamble Suppression */
81 #define BMSR_ACOMP 0x0020 /* Autonegotiation complete */
82 #define BMSR_RFAULT 0x0010 /* Link partner fault */
83 #define BMSR_ANEG 0x0008 /* Autonegotiation capable */
84 #define BMSR_LINK 0x0004 /* Link status */
85 #define BMSR_JABBER 0x0002 /* Jabber detected */
86 #define BMSR_EXTCAP 0x0001 /* Extended capability */
87
88 /*
89 * Note that the EXTSTAT bit indicates that there is extended status
90 * info available in register 15, but 802.3 section 22.2.4.3 also
91 * states that that all 1000 Mb/s capable PHYs will set this bit to 1.
92 */
93
94 #define BMSR_MEDIAMASK (BMSR_100T4|BMSR_100TXFDX|BMSR_100TXHDX| \
95 BMSR_10TFDX|BMSR_10THDX|BMSR_100T2FDX|BMSR_100T2HDX)
96
97 /*
98 * Convert BMSR media capabilities to ANAR bits for autonegotiation.
99 * Note the shift chopps off the BMSR_ANEG bit.
100 */
101 #define BMSR_MEDIA_TO_ANAR(x) (((x) & BMSR_MEDIAMASK) >> 6)
102
103 #define MII_PHYIDR1 0x02 /* ID register 1 (ro) */
104
105 #define MII_PHYIDR2 0x03 /* ID register 2 (ro) */
106 #define IDR2_OUILSB 0xfc00 /* OUI LSB */
107 #define IDR2_MODEL 0x03f0 /* vendor model */
108 #define IDR2_REV 0x000f /* vendor revision */
109
110 #define MII_ANAR 0x04 /* Autonegotiation advertisement (rw) */
111 /* section 28.2.4.1 and 37.2.6.1 */
112 #define ANAR_NP 0x8000 /* Next page (ro) */
113 #define ANAR_ACK 0x4000 /* link partner abilities acknowledged (ro) */
114 #define ANAR_RF 0x2000 /* remote fault (ro) */
115 #define ANAR_FC 0x0400 /* local device supports PAUSE */
116 #define ANAR_T4 0x0200 /* local device supports 100bT4 */
117 #define ANAR_TX_FD 0x0100 /* local device supports 100bTx FD */
118 #define ANAR_TX 0x0080 /* local device supports 100bTx */
119 #define ANAR_10_FD 0x0040 /* local device supports 10bT FD */
120 #define ANAR_10 0x0020 /* local device supports 10bT */
121 #define ANAR_CSMA 0x0001 /* protocol selector CSMA/CD */
122
123 #define ANAR_X_FD 0x0020 /* local device supports 1000BASE-X FD */
124 #define ANAR_X_HD 0x0040 /* local device supports 1000BASE-X HD */
125 #define ANAR_X_PAUSE_NONE (0 << 7)
126 #define ANAR_X_PAUSE_SYM (1 << 7)
127 #define ANAR_X_PAUSE_ASYM (2 << 7)
128 #define ANAR_X_PAUSE_TOWARDS (3 << 7)
129
130 #define MII_ANLPAR 0x05 /* Autonegotiation lnk partner abilities (rw) */
131 /* section 28.2.4.1 and 37.2.6.1 */
132 #define ANLPAR_NP 0x8000 /* Next page (ro) */
133 #define ANLPAR_ACK 0x4000 /* link partner accepted ACK (ro) */
134 #define ANLPAR_RF 0x2000 /* remote fault (ro) */
135 #define ANLPAR_FC 0x0400 /* link partner supports PAUSE */
136 #define ANLPAR_T4 0x0200 /* link partner supports 100bT4 */
137 #define ANLPAR_TX_FD 0x0100 /* link partner supports 100bTx FD */
138 #define ANLPAR_TX 0x0080 /* link partner supports 100bTx */
139 #define ANLPAR_10_FD 0x0040 /* link partner supports 10bT FD */
140 #define ANLPAR_10 0x0020 /* link partner supports 10bT */
141 #define ANLPAR_CSMA 0x0001 /* protocol selector CSMA/CD */
142
143 #define ANLPAR_X_FD 0x0020 /* local device supports 1000BASE-X FD */
144 #define ANLPAR_X_HD 0x0040 /* local device supports 1000BASE-X HD */
145 #define ANLPAR_X_PAUSE_MASK (3 << 7)
146 #define ANLPAR_X_PAUSE_NONE (0 << 7)
147 #define ANLPAR_X_PAUSE_SYM (1 << 7)
148 #define ANLPAR_X_PAUSE_ASYM (2 << 7)
149 #define ANLPAR_X_PAUSE_TOWARDS (3 << 7)
150
151 #define MII_ANER 0x06 /* Autonegotiation expansion (ro) */
152 /* section 28.2.4.1 and 37.2.6.1 */
153 #define ANER_MLF 0x0010 /* multiple link detection fault */
154 #define ANER_LPNP 0x0008 /* link parter next page-able */
155 #define ANER_NP 0x0004 /* next page-able */
156 #define ANER_PAGE_RX 0x0002 /* Page received */
157 #define ANER_LPAN 0x0001 /* link parter autoneg-able */
158
159 #define MII_ANNP 0x07 /* Autonegotiation next page */
160 /* section 28.2.4.1 and 37.2.6.1 */
161
162 #define MII_ANLPRNP 0x08 /* Autonegotiation link partner rx next page */
163 /* section 32.5.1 and 37.2.6.1 */
164
165 /* This is also the 1000baseT control register */
166 #define MII_100T2CR 0x09 /* 100base-T2 control register */
167 #define GTCR_TEST_MASK 0xe000 /* see 802.3ab ss. 40.6.1.1.2 */
168 #define GTCR_MAN_MS 0x1000 /* enable manual master/slave control */
169 #define GTCR_ADV_MS 0x0800 /* 1 = adv. master, 0 = adv. slave */
170 #define GTCR_PORT_TYPE 0x0400 /* 1 = DCE, 0 = DTE (NIC) */
171 #define GTCR_ADV_1000TFDX 0x0200 /* adv. 1000baseT FDX */
172 #define GTCR_ADV_1000THDX 0x0100 /* adv. 1000baseT HDX */
173
174 /* This is also the 1000baseT status register */
175 #define MII_100T2SR 0x0a /* 100base-T2 status register */
176 #define GTSR_MAN_MS_FLT 0x8000 /* master/slave config fault */
177 #define GTSR_MS_RES 0x4000 /* result: 1 = master, 0 = slave */
178 #define GTSR_LRS 0x2000 /* local rx status, 1 = ok */
179 #define GTSR_RRS 0x1000 /* remove rx status, 1 = ok */
180 #define GTSR_LP_1000TFDX 0x0800 /* link partner 1000baseT FDX capable */
181 #define GTSR_LP_1000THDX 0x0400 /* link partner 1000baseT HDX capable */
182 #define GTSR_LP_ASM_DIR 0x0200 /* link partner asym. pause dir. capable */
183 #define GTSR_IDLE_ERR 0x00ff /* IDLE error count */
184
185 #define MII_EXTSR 0x0f /* Extended status register */
186 #define EXTSR_1000XFDX 0x8000 /* 1000X full-duplex capable */
187 #define EXTSR_1000XHDX 0x4000 /* 1000X half-duplex capable */
188 #define EXTSR_1000TFDX 0x2000 /* 1000T full-duplex capable */
189 #define EXTSR_1000THDX 0x1000 /* 1000T half-duplex capable */
190
191 #define EXTSR_MEDIAMASK (EXTSR_1000XFDX|EXTSR_1000XHDX| \
192 EXTSR_1000TFDX|EXTSR_1000THDX)
193
194 #endif /* _DEV_MII_MII_H_ */
Cache object: 0fa8088bf07cef2f6bd0abd1cb10767c
|