The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/dev/mii/nsphyter.c

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*      $NetBSD: nsphyter.c,v 1.28 2008/01/20 07:58:19 msaitoh Exp $    */
    2 
    3 /*-
    4  * SPDX-License-Identifier: BSD-2-Clause-NetBSD AND BSD-2-Clause
    5  *
    6  * Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
    7  * All rights reserved.
    8  *
    9  * This code is derived from software contributed to The NetBSD Foundation
   10  * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
   11  * NASA Ames Research Center.
   12  *
   13  * Redistribution and use in source and binary forms, with or without
   14  * modification, are permitted provided that the following conditions
   15  * are met:
   16  * 1. Redistributions of source code must retain the above copyright
   17  *    notice, this list of conditions and the following disclaimer.
   18  * 2. Redistributions in binary form must reproduce the above copyright
   19  *    notice, this list of conditions and the following disclaimer in the
   20  *    documentation and/or other materials provided with the distribution.
   21  *
   22  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
   23  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
   24  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
   25  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
   26  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
   27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
   28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
   29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
   30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
   31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
   32  * POSSIBILITY OF SUCH DAMAGE.
   33  */
   34 
   35 /*-
   36  * Copyright (c) 1997 Manuel Bouyer.  All rights reserved.
   37  *
   38  * Redistribution and use in source and binary forms, with or without
   39  * modification, are permitted provided that the following conditions
   40  * are met:
   41  * 1. Redistributions of source code must retain the above copyright
   42  *    notice, this list of conditions and the following disclaimer.
   43  * 2. Redistributions in binary form must reproduce the above copyright
   44  *    notice, this list of conditions and the following disclaimer in the
   45  *    documentation and/or other materials provided with the distribution.
   46  *
   47  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
   48  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
   49  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
   50  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
   51  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
   52  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
   53  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
   54  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
   55  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
   56  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   57  */
   58 
   59 #include <sys/cdefs.h>
   60 __FBSDID("$FreeBSD$");
   61 
   62 /*
   63  * Driver for the National Semiconductor's DP83843, DP83847 and DP83849
   64  * `PHYTER' Ethernet 10/100 PHYs
   65  * Data Sheets are available from http://www.national.com
   66  *
   67  * We also support the DP83815 `MacPHYTER' internal PHY since, for our
   68  * purposes, they are compatible.
   69  */
   70 
   71 #include <sys/param.h>
   72 #include <sys/systm.h>
   73 #include <sys/bus.h>
   74 #include <sys/errno.h>
   75 #include <sys/kernel.h>
   76 #include <sys/module.h>
   77 #include <sys/socket.h>
   78 
   79 #include <net/if.h>
   80 #include <net/if_media.h>
   81 
   82 #include <dev/mii/mii.h>
   83 #include <dev/mii/miivar.h>
   84 #include "miidevs.h"
   85 
   86 #include <dev/mii/nsphyterreg.h>
   87 
   88 #include "miibus_if.h"
   89 
   90 static device_probe_t   nsphyter_probe;
   91 static device_attach_t  nsphyter_attach;
   92 
   93 static device_method_t nsphyter_methods[] = {
   94         /* device interface */
   95         DEVMETHOD(device_probe,         nsphyter_probe),
   96         DEVMETHOD(device_attach,        nsphyter_attach),
   97         DEVMETHOD(device_detach,        mii_phy_detach),
   98         DEVMETHOD(device_shutdown,      bus_generic_shutdown),
   99         DEVMETHOD_END
  100 };
  101 
  102 static driver_t nsphyter_driver = {
  103         "nsphyter",
  104         nsphyter_methods,
  105         sizeof(struct mii_softc)
  106 };
  107 
  108 DRIVER_MODULE(nsphyter, miibus, nsphyter_driver, 0, 0);
  109 
  110 static int      nsphyter_service(struct mii_softc *, struct mii_data *, int);
  111 static void     nsphyter_status(struct mii_softc *);
  112 static void     nsphyter_reset(struct mii_softc *);
  113 
  114 static const struct mii_phydesc nsphyters[] = {
  115         MII_PHY_DESC(xxNATSEMI, DP83815),
  116         MII_PHY_DESC(xxNATSEMI, DP83843),
  117         MII_PHY_DESC(xxNATSEMI, DP83847),
  118         MII_PHY_DESC(xxNATSEMI, DP83849),
  119         MII_PHY_END
  120 };
  121 
  122 static const struct mii_phy_funcs nsphyter_funcs = {
  123         nsphyter_service,
  124         nsphyter_status,
  125         nsphyter_reset
  126 };
  127 
  128 static int
  129 nsphyter_probe(device_t dev)
  130 {
  131 
  132         return (mii_phy_dev_probe(dev, nsphyters, BUS_PROBE_DEFAULT));
  133 }
  134 
  135 static int
  136 nsphyter_attach(device_t dev)
  137 {
  138 
  139         mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &nsphyter_funcs, 1);
  140         return (0);
  141 }
  142 
  143 static int
  144 nsphyter_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
  145 {
  146 
  147         switch (cmd) {
  148         case MII_POLLSTAT:
  149                 break;
  150 
  151         case MII_MEDIACHG:
  152                 mii_phy_setmedia(sc);
  153                 break;
  154 
  155         case MII_TICK:
  156                 if (mii_phy_tick(sc) == EJUSTRETURN)
  157                         return (0);
  158                 break;
  159         }
  160 
  161         /* Update the media status. */
  162         PHY_STATUS(sc);
  163 
  164         /* Callback if something changed. */
  165         mii_phy_update(sc, cmd);
  166         return (0);
  167 }
  168 
  169 static void
  170 nsphyter_status(struct mii_softc *sc)
  171 {
  172         struct mii_data *mii = sc->mii_pdata;
  173         struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
  174         int bmsr, bmcr, physts;
  175 
  176         mii->mii_media_status = IFM_AVALID;
  177         mii->mii_media_active = IFM_ETHER;
  178 
  179         bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
  180         physts = PHY_READ(sc, MII_NSPHYTER_PHYSTS);
  181 
  182         if ((physts & PHYSTS_LINK) != 0)
  183                 mii->mii_media_status |= IFM_ACTIVE;
  184 
  185         bmcr = PHY_READ(sc, MII_BMCR);
  186         if ((bmcr & BMCR_ISO) != 0) {
  187                 mii->mii_media_active |= IFM_NONE;
  188                 mii->mii_media_status = 0;
  189                 return;
  190         }
  191 
  192         if ((bmcr & BMCR_LOOP) != 0)
  193                 mii->mii_media_active |= IFM_LOOP;
  194 
  195         if ((bmcr & BMCR_AUTOEN) != 0) {
  196                 /*
  197                  * The media status bits are only valid if autonegotiation
  198                  * has completed (or it's disabled).
  199                  */
  200                 if ((bmsr & BMSR_ACOMP) == 0) {
  201                         /* Erg, still trying, I guess... */
  202                         mii->mii_media_active |= IFM_NONE;
  203                         return;
  204                 }
  205 
  206                 if ((physts & PHYSTS_SPEED10) != 0)
  207                         mii->mii_media_active |= IFM_10_T;
  208                 else
  209                         mii->mii_media_active |= IFM_100_TX;
  210                 if ((physts & PHYSTS_DUPLEX) != 0)
  211                         mii->mii_media_active |=
  212                             IFM_FDX | mii_phy_flowstatus(sc);
  213                 else
  214                         mii->mii_media_active |= IFM_HDX;
  215         } else
  216                 mii->mii_media_active = ife->ifm_media;
  217 }
  218 
  219 static void
  220 nsphyter_reset(struct mii_softc *sc)
  221 {
  222         struct ifmedia_entry *ife = sc->mii_pdata->mii_media.ifm_cur;
  223         int reg, i;
  224 
  225         if ((sc->mii_flags & MIIF_NOISOLATE) != 0)
  226                 reg = BMCR_RESET;
  227         else
  228                 reg = BMCR_RESET | BMCR_ISO;
  229         PHY_WRITE(sc, MII_BMCR, reg);
  230 
  231         /*
  232          * It is best to allow a little time for the reset to settle
  233          * in before we start polling the BMCR again.  Notably, the
  234          * DP8384{3,7} manuals state that there should be a 500us delay
  235          * between asserting software reset and attempting MII serial
  236          * operations.  Be conservative.  Also, a DP83815 can get into
  237          * a bad state on cable removal and reinsertion if we do not
  238          * delay here.
  239          */
  240         DELAY(1000);
  241 
  242         /*
  243          * Wait another 2s for it to complete.
  244          * This is only a little overkill as under normal circumstances
  245          * the PHY can take up to 1s to complete reset.
  246          * This is also a bit odd because after a reset, the BMCR will
  247          * clear the reset bit and simply reports 0 even though the reset
  248          * is not yet complete.
  249          */
  250         for (i = 0; i < 1000; i++) {
  251                 reg = PHY_READ(sc, MII_BMCR);
  252                 if (reg != 0 && (reg & BMCR_RESET) == 0)
  253                         break;
  254                 DELAY(2000);
  255         }
  256 
  257         if ((sc->mii_flags & MIIF_NOISOLATE) == 0) {
  258                 if ((ife == NULL && sc->mii_inst != 0) ||
  259                     (ife != NULL && IFM_INST(ife->ifm_media) != sc->mii_inst))
  260                         PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
  261         }
  262 }

Cache object: cc24a6dd7794d2686cf72291dee8c540


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.