FreeBSD/Linux Kernel Cross Reference
sys/dev/mii/nsphyter.c
1 /* $NetBSD: nsphyter.c,v 1.28 2008/01/20 07:58:19 msaitoh Exp $ */
2
3 /*-
4 * SPDX-License-Identifier: BSD-2-Clause-NetBSD AND BSD-2-Clause
5 *
6 * Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
7 * All rights reserved.
8 *
9 * This code is derived from software contributed to The NetBSD Foundation
10 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
11 * NASA Ames Research Center.
12 *
13 * Redistribution and use in source and binary forms, with or without
14 * modification, are permitted provided that the following conditions
15 * are met:
16 * 1. Redistributions of source code must retain the above copyright
17 * notice, this list of conditions and the following disclaimer.
18 * 2. Redistributions in binary form must reproduce the above copyright
19 * notice, this list of conditions and the following disclaimer in the
20 * documentation and/or other materials provided with the distribution.
21 *
22 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
23 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
24 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
25 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
32 * POSSIBILITY OF SUCH DAMAGE.
33 */
34
35 /*-
36 * Copyright (c) 1997 Manuel Bouyer. All rights reserved.
37 *
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
40 * are met:
41 * 1. Redistributions of source code must retain the above copyright
42 * notice, this list of conditions and the following disclaimer.
43 * 2. Redistributions in binary form must reproduce the above copyright
44 * notice, this list of conditions and the following disclaimer in the
45 * documentation and/or other materials provided with the distribution.
46 *
47 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
48 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
49 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
50 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
51 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
52 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
53 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
54 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
55 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
56 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
57 */
58
59 #include <sys/cdefs.h>
60 __FBSDID("$FreeBSD$");
61
62 /*
63 * Driver for the National Semiconductor's DP83843, DP83847 and DP83849
64 * `PHYTER' Ethernet 10/100 PHYs
65 * Data Sheets are available from http://www.national.com
66 *
67 * We also support the DP83815 `MacPHYTER' internal PHY since, for our
68 * purposes, they are compatible.
69 */
70
71 #include <sys/param.h>
72 #include <sys/systm.h>
73 #include <sys/bus.h>
74 #include <sys/errno.h>
75 #include <sys/kernel.h>
76 #include <sys/module.h>
77 #include <sys/socket.h>
78
79 #include <net/if.h>
80 #include <net/if_media.h>
81
82 #include <dev/mii/mii.h>
83 #include <dev/mii/miivar.h>
84 #include "miidevs.h"
85
86 #include <dev/mii/nsphyterreg.h>
87
88 #include "miibus_if.h"
89
90 static device_probe_t nsphyter_probe;
91 static device_attach_t nsphyter_attach;
92
93 static device_method_t nsphyter_methods[] = {
94 /* device interface */
95 DEVMETHOD(device_probe, nsphyter_probe),
96 DEVMETHOD(device_attach, nsphyter_attach),
97 DEVMETHOD(device_detach, mii_phy_detach),
98 DEVMETHOD(device_shutdown, bus_generic_shutdown),
99 DEVMETHOD_END
100 };
101
102 static devclass_t nsphyter_devclass;
103
104 static driver_t nsphyter_driver = {
105 "nsphyter",
106 nsphyter_methods,
107 sizeof(struct mii_softc)
108 };
109
110 DRIVER_MODULE(nsphyter, miibus, nsphyter_driver, nsphyter_devclass, 0, 0);
111
112 static int nsphyter_service(struct mii_softc *, struct mii_data *, int);
113 static void nsphyter_status(struct mii_softc *);
114 static void nsphyter_reset(struct mii_softc *);
115
116 static const struct mii_phydesc nsphyters[] = {
117 MII_PHY_DESC(xxNATSEMI, DP83815),
118 MII_PHY_DESC(xxNATSEMI, DP83843),
119 MII_PHY_DESC(xxNATSEMI, DP83847),
120 MII_PHY_DESC(xxNATSEMI, DP83849),
121 MII_PHY_END
122 };
123
124 static const struct mii_phy_funcs nsphyter_funcs = {
125 nsphyter_service,
126 nsphyter_status,
127 nsphyter_reset
128 };
129
130 static int
131 nsphyter_probe(device_t dev)
132 {
133
134 return (mii_phy_dev_probe(dev, nsphyters, BUS_PROBE_DEFAULT));
135 }
136
137 static int
138 nsphyter_attach(device_t dev)
139 {
140
141 mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &nsphyter_funcs, 1);
142 return (0);
143 }
144
145 static int
146 nsphyter_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
147 {
148
149 switch (cmd) {
150 case MII_POLLSTAT:
151 break;
152
153 case MII_MEDIACHG:
154 mii_phy_setmedia(sc);
155 break;
156
157 case MII_TICK:
158 if (mii_phy_tick(sc) == EJUSTRETURN)
159 return (0);
160 break;
161 }
162
163 /* Update the media status. */
164 PHY_STATUS(sc);
165
166 /* Callback if something changed. */
167 mii_phy_update(sc, cmd);
168 return (0);
169 }
170
171 static void
172 nsphyter_status(struct mii_softc *sc)
173 {
174 struct mii_data *mii = sc->mii_pdata;
175 struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
176 int bmsr, bmcr, physts;
177
178 mii->mii_media_status = IFM_AVALID;
179 mii->mii_media_active = IFM_ETHER;
180
181 bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
182 physts = PHY_READ(sc, MII_NSPHYTER_PHYSTS);
183
184 if ((physts & PHYSTS_LINK) != 0)
185 mii->mii_media_status |= IFM_ACTIVE;
186
187 bmcr = PHY_READ(sc, MII_BMCR);
188 if ((bmcr & BMCR_ISO) != 0) {
189 mii->mii_media_active |= IFM_NONE;
190 mii->mii_media_status = 0;
191 return;
192 }
193
194 if ((bmcr & BMCR_LOOP) != 0)
195 mii->mii_media_active |= IFM_LOOP;
196
197 if ((bmcr & BMCR_AUTOEN) != 0) {
198 /*
199 * The media status bits are only valid if autonegotiation
200 * has completed (or it's disabled).
201 */
202 if ((bmsr & BMSR_ACOMP) == 0) {
203 /* Erg, still trying, I guess... */
204 mii->mii_media_active |= IFM_NONE;
205 return;
206 }
207
208 if ((physts & PHYSTS_SPEED10) != 0)
209 mii->mii_media_active |= IFM_10_T;
210 else
211 mii->mii_media_active |= IFM_100_TX;
212 if ((physts & PHYSTS_DUPLEX) != 0)
213 mii->mii_media_active |=
214 IFM_FDX | mii_phy_flowstatus(sc);
215 else
216 mii->mii_media_active |= IFM_HDX;
217 } else
218 mii->mii_media_active = ife->ifm_media;
219 }
220
221 static void
222 nsphyter_reset(struct mii_softc *sc)
223 {
224 struct ifmedia_entry *ife = sc->mii_pdata->mii_media.ifm_cur;
225 int reg, i;
226
227 if ((sc->mii_flags & MIIF_NOISOLATE) != 0)
228 reg = BMCR_RESET;
229 else
230 reg = BMCR_RESET | BMCR_ISO;
231 PHY_WRITE(sc, MII_BMCR, reg);
232
233 /*
234 * It is best to allow a little time for the reset to settle
235 * in before we start polling the BMCR again. Notably, the
236 * DP8384{3,7} manuals state that there should be a 500us delay
237 * between asserting software reset and attempting MII serial
238 * operations. Be conservative. Also, a DP83815 can get into
239 * a bad state on cable removal and reinsertion if we do not
240 * delay here.
241 */
242 DELAY(1000);
243
244 /*
245 * Wait another 2s for it to complete.
246 * This is only a little overkill as under normal circumstances
247 * the PHY can take up to 1s to complete reset.
248 * This is also a bit odd because after a reset, the BMCR will
249 * clear the reset bit and simply reports 0 even though the reset
250 * is not yet complete.
251 */
252 for (i = 0; i < 1000; i++) {
253 reg = PHY_READ(sc, MII_BMCR);
254 if (reg != 0 && (reg & BMCR_RESET) == 0)
255 break;
256 DELAY(2000);
257 }
258
259 if ((sc->mii_flags & MIIF_NOISOLATE) == 0) {
260 if ((ife == NULL && sc->mii_inst != 0) ||
261 (ife != NULL && IFM_INST(ife->ifm_media) != sc->mii_inst))
262 PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
263 }
264 }
Cache object: a9ef3d84324d1984ddb9eb03872976dc
|