FreeBSD/Linux Kernel Cross Reference
sys/dev/mii/nsphyter.c

     /*      $NetBSD: nsphyter.c,v 1.28 2008/01/20 07:58:19 msaitoh Exp $    */
     
     /*-
      * Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
      * All rights reserved.
      *
      * This code is derived from software contributed to The NetBSD Foundation
      * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
      * NASA Ames Research Center.
     *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     * POSSIBILITY OF SUCH DAMAGE.
     */
    
    /*-
     * Copyright (c) 1997 Manuel Bouyer.  All rights reserved.
     *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     */
    
    #include <sys/cdefs.h>
    __FBSDID("$FreeBSD: releng/8.2/sys/dev/mii/nsphyter.c 215882 2010-11-26 20:45:49Z marius $");
    
    /*
     * driver for National Semiconductor's DP83843 `PHYTER' ethernet 10/100 PHY
     * Data Sheet available from www.national.com
     *
     * We also support the DP83815 `MacPHYTER' internal PHY since, for our
     * purposes, they are compatible.
     */
    
    #include <sys/param.h>
    #include <sys/systm.h>
    #include <sys/bus.h>
    #include <sys/errno.h>
    #include <sys/kernel.h>
    #include <sys/module.h>
    #include <sys/socket.h>
    
    #include <net/if.h>
    #include <net/if_media.h>
    
    #include <dev/mii/mii.h>
    #include <dev/mii/miivar.h>
    #include "miidevs.h"
    
    #include <dev/mii/nsphyterreg.h>
    
    #include "miibus_if.h"
    
    static device_probe_t   nsphyter_probe;
    static device_attach_t  nsphyter_attach;
    
    static device_method_t nsphyter_methods[] = {
            /* device interface */
            DEVMETHOD(device_probe,         nsphyter_probe),
            DEVMETHOD(device_attach,        nsphyter_attach),
            DEVMETHOD(device_detach,        mii_phy_detach),
            DEVMETHOD(device_shutdown,      bus_generic_shutdown),
            { 0, 0 }
    };
    
    static devclass_t nsphyter_devclass;
   
   static driver_t nsphyter_driver = {
           "nsphyter",
           nsphyter_methods,
           sizeof(struct mii_softc)
   };
   
   DRIVER_MODULE(nsphyter, miibus, nsphyter_driver, nsphyter_devclass, 0, 0);
   
   static int      nsphyter_service(struct mii_softc *, struct mii_data *, int);
   static void     nsphyter_status(struct mii_softc *);
   static void     nsphyter_reset(struct mii_softc *);
   
   static const struct mii_phydesc nsphys[] = {
           MII_PHY_DESC(NATSEMI, DP83815),
           MII_PHY_DESC(NATSEMI, DP83843),
           MII_PHY_DESC(NATSEMI, DP83847),
           MII_PHY_END
   };
   
   static int
   nsphyter_probe(device_t dev)
   {
   
           return (mii_phy_dev_probe(dev, nsphys, BUS_PROBE_DEFAULT));
   }
   
   static int
   nsphyter_attach(device_t dev)
   {
           struct mii_softc *sc;
           struct mii_attach_args *ma;
           struct mii_data *mii;
   
           sc = device_get_softc(dev);
           ma = device_get_ivars(dev);
           sc->mii_dev = device_get_parent(dev);
           mii = ma->mii_data;
           LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
   
           sc->mii_flags = miibus_get_flags(dev);
           sc->mii_inst = mii->mii_instance++;
           sc->mii_phy = ma->mii_phyno;
           sc->mii_service = nsphyter_service;
           sc->mii_pdata = mii;
   
           sc->mii_flags |= MIIF_NOMANPAUSE;
   
   #if 1
   
   #define ADD(m, c)       ifmedia_add(&mii->mii_media, (m), (c), NULL)
   
           /*
            * XXX IFM_LOOP should be handled by mii_phy_add_media() based
            * on MIIF_NOLOOP.
            */
           if ((sc->mii_flags & MIIF_NOLOOP) == 0)
                   ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP,
                       sc->mii_inst), MII_MEDIA_100_TX);
   
   #endif
   
           nsphyter_reset(sc);
   
           sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
           device_printf(dev, " ");
           mii_phy_add_media(sc);
           printf("\n");
   
           MIIBUS_MEDIAINIT(sc->mii_dev);
           return (0);
   }
   
   static int
   nsphyter_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
   {
   
           switch (cmd) {
           case MII_POLLSTAT:
                   break;
   
           case MII_MEDIACHG:
                   /*
                    * If the interface is not up, don't do anything.
                    */
                   if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
                           break;
   
                   mii_phy_setmedia(sc);
                   break;
   
           case MII_TICK:
                   if (mii_phy_tick(sc) == EJUSTRETURN)
                           return (0);
                   break;
           }
   
           /* Update the media status. */
           nsphyter_status(sc);
   
           /* Callback if something changed. */
           mii_phy_update(sc, cmd);
           return (0);
   }
   
   static void
   nsphyter_status(struct mii_softc *sc)
   {
           struct mii_data *mii = sc->mii_pdata;
           struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
           int bmsr, bmcr, physts;
   
           mii->mii_media_status = IFM_AVALID;
           mii->mii_media_active = IFM_ETHER;
   
           bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
           physts = PHY_READ(sc, MII_NSPHYTER_PHYSTS);
   
           if ((physts & PHYSTS_LINK) != 0)
                   mii->mii_media_status |= IFM_ACTIVE;
   
           bmcr = PHY_READ(sc, MII_BMCR);
           if ((bmcr & BMCR_ISO) != 0) {
                   mii->mii_media_active |= IFM_NONE;
                   mii->mii_media_status = 0;
                   return;
           }
   
           if ((bmcr & BMCR_LOOP) != 0)
                   mii->mii_media_active |= IFM_LOOP;
   
           if ((bmcr & BMCR_AUTOEN) != 0) {
                   /*
                    * The media status bits are only valid if autonegotiation
                    * has completed (or it's disabled).
                    */
                   if ((bmsr & BMSR_ACOMP) == 0) {
                           /* Erg, still trying, I guess... */
                           mii->mii_media_active |= IFM_NONE;
                           return;
                   }
   
                   if ((physts & PHYSTS_SPEED10) != 0)
                           mii->mii_media_active |= IFM_10_T;
                   else
                           mii->mii_media_active |= IFM_100_TX;
                   if ((physts & PHYSTS_DUPLEX) != 0)
                           mii->mii_media_active |=
                               IFM_FDX | mii_phy_flowstatus(sc);
                   else
                           mii->mii_media_active |= IFM_HDX;
           } else
                   mii->mii_media_active = ife->ifm_media;
   }
   
   static void
   nsphyter_reset(struct mii_softc *sc)
   {
           struct ifmedia_entry *ife = sc->mii_pdata->mii_media.ifm_cur;
           int reg, i;
   
           if ((sc->mii_flags & MIIF_NOISOLATE) != 0)
                   reg = BMCR_RESET;
           else
                   reg = BMCR_RESET | BMCR_ISO;
           PHY_WRITE(sc, MII_BMCR, reg);
   
           /*
            * It is best to allow a little time for the reset to settle
            * in before we start polling the BMCR again.  Notably, the
            * DP8384{3,7} manuals state that there should be a 500us delay
            * between asserting software reset and attempting MII serial
            * operations.  Be conservative.  Also, a DP83815 can get into
            * a bad state on cable removal and reinsertion if we do not
            * delay here.
            */
           DELAY(1000);
   
           /*
            * Wait another 2s for it to complete.
            * This is only a little overkill as under normal circumstances
            * the PHY can take up to 1s to complete reset.
            * This is also a bit odd because after a reset, the BMCR will
            * clear the reset bit and simply reports 0 even though the reset
            * is not yet complete.
            */
           for (i = 0; i < 1000; i++) {
                   reg = PHY_READ(sc, MII_BMCR);
                   if (reg != 0 && (reg & BMCR_RESET) == 0)
                           break;
                   DELAY(2000);
           }
   
           if ((sc->mii_flags & MIIF_NOISOLATE) == 0) {
                   if ((ife == NULL && sc->mii_inst != 0) ||
                       (ife != NULL && IFM_INST(ife->ifm_media) != sc->mii_inst))
                           PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
           }
   }

Cache object: 1119b2f496b00aa8eb0d79a354f0aa60