FreeBSD/Linux Kernel Cross Reference
sys/dev/mii/rgephyreg.h

     /*-
      * Copyright (c) 2003
      *      Bill Paul <wpaul@windriver.com>.  All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
      * are met:
      * 1. Redistributions of source code must retain the above copyright
      *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. All advertising materials mentioning features or use of this software
     *    must display the following acknowledgement:
     *      This product includes software developed by Bill Paul.
     * 4. Neither the name of the author nor the names of any co-contributors
     *    may be used to endorse or promote products derived from this software
     *    without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
     * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
     * THE POSSIBILITY OF SUCH DAMAGE.
     *
     * $FreeBSD: releng/8.2/sys/dev/mii/rgephyreg.h 180178 2008-07-02 08:10:18Z yongari $
     */
    
    #ifndef _DEV_MII_RGEPHYREG_H_
    #define _DEV_MII_RGEPHYREG_H_
    
    /*
     * RealTek 8169S/8110S gigE PHY registers
     */
    
    #define RGEPHY_MII_BMCR         0x00
    #define RGEPHY_BMCR_RESET       0x8000
    #define RGEPHY_BMCR_LOOP        0x4000
    #define RGEPHY_BMCR_SPD0        0x2000  /* speed select, lower bit */
    #define RGEPHY_BMCR_AUTOEN      0x1000  /* Autoneg enabled */
    #define RGEPHY_BMCR_PDOWN       0x0800  /* Power down */
    #define RGEPHY_BMCR_ISO         0x0400  /* Isolate */
    #define RGEPHY_BMCR_STARTNEG    0x0200  /* Restart autoneg */
    #define RGEPHY_BMCR_FDX         0x0100  /* Duplex mode */
    #define RGEPHY_BMCR_CTEST       0x0080  /* Collision test enable */
    #define RGEPHY_BMCR_SPD1        0x0040  /* Speed select, upper bit */
    
    #define RGEPHY_S1000            RGEPHY_BMCR_SPD1        /* 1000mbps */
    #define RGEPHY_S100             RGEPHY_BMCR_SPD0        /* 100mpbs */
    #define RGEPHY_S10              0                       /* 10mbps */
    
    #define RGEPHY_MII_BMSR         0x01
    #define RGEPHY_BMSR_100T4       0x8000  /* 100 base T4 capable */
    #define RGEPHY_BMSR_100TXFDX    0x4000  /* 100 base Tx full duplex capable */
    #define RGEPHY_BMSR_100TXHDX    0x2000  /* 100 base Tx half duplex capable */
    #define RGEPHY_BMSR_10TFDX      0x1000  /* 10 base T full duplex capable */
    #define RGEPHY_BMSR_10THDX      0x0800  /* 10 base T half duplex capable */
    #define RGEPHY_BMSR_100T2FDX    0x0400  /* 100 base T2 full duplex capable */
    #define RGEPHY_BMSR_100T2HDX    0x0200  /* 100 base T2 half duplex capable */
    #define RGEPHY_BMSR_EXTSTS      0x0100  /* Extended status present */
    #define RGEPHY_BMSR_PRESUB      0x0040  /* Preamble surpression */
    #define RGEPHY_BMSR_ACOMP       0x0020  /* Autoneg complete */
    #define RGEPHY_BMSR_RFAULT      0x0010  /* Remote fault condition occured */
    #define RGEPHY_BMSR_ANEG        0x0008  /* Autoneg capable */
    #define RGEPHY_BMSR_LINK        0x0004  /* Link status */
    #define RGEPHY_BMSR_JABBER      0x0002  /* Jabber detected */
    #define RGEPHY_BMSR_EXT         0x0001  /* Extended capability */
    
    #define RGEPHY_MII_ANAR         0x04
    #define RGEPHY_ANAR_NP          0x8000  /* Next page */
    #define RGEPHY_ANAR_RF          0x2000  /* Remote fault */
    #define RGEPHY_ANAR_ASP         0x0800  /* Asymmetric Pause */
    #define RGEPHY_ANAR_PC          0x0400  /* Pause capable */
    #define RGEPHY_ANAR_T4          0x0200  /* local device supports 100bT4 */
    #define RGEPHY_ANAR_TX_FD       0x0100  /* local device supports 100bTx FD */
    #define RGEPHY_ANAR_TX          0x0080  /* local device supports 100bTx */
    #define RGEPHY_ANAR_10_FD       0x0040  /* local device supports 10bT FD */
    #define RGEPHY_ANAR_10          0x0020  /* local device supports 10bT */
    #define RGEPHY_ANAR_SEL         0x001F  /* selector field, 00001=Ethernet */
    
    #define RGEPHY_MII_ANLPAR       0x05
    #define RGEPHY_ANLPAR_NP        0x8000  /* Next page */
    #define RGEPHY_ANLPAR_RF        0x2000  /* Remote fault */
    #define RGEPHY_ANLPAR_ASP       0x0800  /* Asymmetric Pause */
    #define RGEPHY_ANLPAR_PC        0x0400  /* Pause capable */
    #define RGEPHY_ANLPAR_T4        0x0200  /* link partner supports 100bT4 */
    #define RGEPHY_ANLPAR_TX_FD     0x0100  /* link partner supports 100bTx FD */
    #define RGEPHY_ANLPAR_TX        0x0080  /* link partner supports 100bTx */
    #define RGEPHY_ANLPAR_10_FD     0x0040  /* link partner supports 10bT FD */
    #define RGEPHY_ANLPAR_10        0x0020  /* link partner supports 10bT */
    #define RGEPHY_ANLPAR_SEL       0x001F  /* selector field, 00001=Ethernet */
    
    #define RGEPHY_SEL_TYPE         0x0001  /* ethernet */
   
   #define RGEPHY_MII_ANER         0x06
   #define RGEPHY_ANER_PDF         0x0010  /* Parallel detection fault */
   #define RGEPHY_ANER_LPNP        0x0008  /* Link partner can next page */
   #define RGEPHY_ANER_NP          0x0004  /* Local PHY can next page */
   #define RGEPHY_ANER_RX          0x0002  /* Next page received */
   #define RGEPHY_ANER_LPAN        0x0001  /* Link partner autoneg capable */
   
   #define RGEPHY_MII_NEXTP        0x07    /* Next page */
   
   #define RGEPHY_MII_NEXTP_LP     0x08    /* Next page of link partner */
   
   #define RGEPHY_MII_1000CTL      0x09    /* 1000baseT control */
   #define RGEPHY_1000CTL_TST      0xE000  /* test modes */
   #define RGEPHY_1000CTL_MSE      0x1000  /* Master/Slave manual enable */
   #define RGEPHY_1000CTL_MSC      0x0800  /* Master/Slave select */
   #define RGEPHY_1000CTL_RD       0x0400  /* Repeater/DTE */
   #define RGEPHY_1000CTL_AFD      0x0200  /* Advertise full duplex */
   #define RGEPHY_1000CTL_AHD      0x0100  /* Advertise half duplex */
   
   #define RGEPHY_TEST_TX_JITTER                   0x2000
   #define RGEPHY_TEST_TX_JITTER_MASTER_MODE       0x4000
   #define RGEPHY_TEST_TX_JITTER_SLAVE_MODE        0x6000
   #define RGEPHY_TEST_TX_DISTORTION               0x8000
   
   #define RGEPHY_MII_1000STS      0x0A    /* 1000baseT status */
   #define RGEPHY_1000STS_MSF      0x8000  /* Master/slave fault */
   #define RGEPHY_1000STS_MSR      0x4000  /* Master/slave result */
   #define RGEPHY_1000STS_LRS      0x2000  /* Local receiver status */
   #define RGEPHY_1000STS_RRS      0x1000  /* Remote receiver status */
   #define RGEPHY_1000STS_LPFD     0x0800  /* Link partner can FD */
   #define RGEPHY_1000STS_LPHD     0x0400  /* Link partner can HD */
   #define RGEPHY_1000STS_IEC      0x00FF  /* Idle error count */
   
   #define RGEPHY_MII_EXTSTS       0x0F    /* Extended status */
   #define RGEPHY_EXTSTS_X_FD_CAP  0x8000  /* 1000base-X FD capable */
   #define RGEPHY_EXTSTS_X_HD_CAP  0x4000  /* 1000base-X HD capable */
   #define RGEPHY_EXTSTS_T_FD_CAP  0x2000  /* 1000base-T FD capable */
   #define RGEPHY_EXTSTS_T_HD_CAP  0x1000  /* 1000base-T HD capable */
   
   /* RTL8211B(L)/RTL8211C(L) */
   #define RGEPHY_MII_SSR          0x11    /* PHY Specific status register */
   #define RGEPHY_SSR_S1000        0x8000  /* 1000Mbps */
   #define RGEPHY_SSR_S100         0x4000  /* 100Mbps */
   #define RGEPHY_SSR_S10          0x0000  /* 10Mbps */
   #define RGEPHY_SSR_SPD_MASK     0xc000
   #define RGEPHY_SSR_FDX          0x2000  /* full duplex */
   #define RGEPHY_SSR_PAGE_RECEIVED        0x1000  /* new page received */
   #define RGEPHY_SSR_SPD_DPLX_RESOLVED    0x0800  /* speed/duplex resolved */
   #define RGEPHY_SSR_LINK         0x0400  /* link up */
   #define RGEPHY_SSR_MDI_XOVER    0x0040  /* MDI crossover */
   #define RGEPHY_SSR_ALDPS        0x0008  /* RTL8211C(L) only */
   #define RGEPHY_SSR_JABBER       0x0001  /* Jabber */
   
   #endif /* _DEV_RGEPHY_MIIREG_H_ */

Cache object: 6648365c4199f63e2141b2acae22868f