FreeBSD/Linux Kernel Cross Reference
sys/dev/mii/tdkphy.c
1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3 *
4 * Copyright (c) 2000,2001 Jonathan Chen.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification, immediately at the beginning of the file.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
16 * distribution.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
22 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 * SUCH DAMAGE.
29 */
30
31 #include <sys/cdefs.h>
32 __FBSDID("$FreeBSD$");
33
34 /*
35 * Driver for the TDK 78Q2120 MII
36 *
37 * References:
38 * Datasheet for the 78Q2120 - http://www.tsc.tdk.com/lan/78q2120.pdf
39 * Most of this code stolen from ukphy.c
40 */
41
42 /*
43 * The TDK 78Q2120 is found on some Xircom X3201 based CardBus cards,
44 * also spotted on some 3C575 cards. It's just like any other normal
45 * phy, except it does auto negotiation in a different way.
46 */
47
48 #include <sys/param.h>
49 #include <sys/systm.h>
50 #include <sys/kernel.h>
51 #include <sys/socket.h>
52 #include <sys/errno.h>
53 #include <sys/module.h>
54 #include <sys/bus.h>
55
56 #include <net/if.h>
57 #include <net/if_media.h>
58
59 #include <dev/mii/mii.h>
60 #include <dev/mii/miivar.h>
61 #include "miidevs.h"
62
63 #include <dev/mii/tdkphyreg.h>
64
65 #include "miibus_if.h"
66
67 static int tdkphy_probe(device_t);
68 static int tdkphy_attach(device_t);
69
70 static device_method_t tdkphy_methods[] = {
71 /* device interface */
72 DEVMETHOD(device_probe, tdkphy_probe),
73 DEVMETHOD(device_attach, tdkphy_attach),
74 DEVMETHOD(device_detach, mii_phy_detach),
75 DEVMETHOD(device_shutdown, bus_generic_shutdown),
76 DEVMETHOD_END
77 };
78
79 static driver_t tdkphy_driver = {
80 "tdkphy",
81 tdkphy_methods,
82 sizeof(struct mii_softc)
83 };
84
85 DRIVER_MODULE(tdkphy, miibus, tdkphy_driver, 0, 0);
86
87 static int tdkphy_service(struct mii_softc *, struct mii_data *, int);
88 static void tdkphy_status(struct mii_softc *);
89
90 static const struct mii_phydesc tdkphys[] = {
91 MII_PHY_DESC(xxTSC, 78Q2120),
92 MII_PHY_END
93 };
94
95 static const struct mii_phy_funcs tdkphy_funcs = {
96 tdkphy_service,
97 tdkphy_status,
98 mii_phy_reset
99 };
100
101 static int
102 tdkphy_probe(device_t dev)
103 {
104
105 return (mii_phy_dev_probe(dev, tdkphys, BUS_PROBE_DEFAULT));
106 }
107
108 static int
109 tdkphy_attach(device_t dev)
110 {
111
112 mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &tdkphy_funcs, 1);
113 return (0);
114 }
115
116 static int
117 tdkphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
118 {
119
120 switch (cmd) {
121 case MII_POLLSTAT:
122 break;
123
124 case MII_MEDIACHG:
125 mii_phy_setmedia(sc);
126 break;
127
128 case MII_TICK:
129 if (mii_phy_tick(sc) == EJUSTRETURN)
130 return (0);
131 break;
132 }
133
134 /* Update the media status. */
135 PHY_STATUS(sc);
136 if (sc->mii_pdata->mii_media_active & IFM_FDX)
137 PHY_WRITE(sc, MII_BMCR, PHY_READ(sc, MII_BMCR) | BMCR_FDX);
138 else
139 PHY_WRITE(sc, MII_BMCR, PHY_READ(sc, MII_BMCR) & ~BMCR_FDX);
140
141 /* Callback if something changed. */
142 mii_phy_update(sc, cmd);
143 return (0);
144 }
145
146 static void
147 tdkphy_status(struct mii_softc *phy)
148 {
149 struct mii_data *mii = phy->mii_pdata;
150 struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
151 int bmsr, bmcr, anlpar, diag;
152
153 mii->mii_media_status = IFM_AVALID;
154 mii->mii_media_active = IFM_ETHER;
155
156 bmsr = PHY_READ(phy, MII_BMSR) | PHY_READ(phy, MII_BMSR);
157 if (bmsr & BMSR_LINK)
158 mii->mii_media_status |= IFM_ACTIVE;
159
160 bmcr = PHY_READ(phy, MII_BMCR);
161 if (bmcr & BMCR_ISO) {
162 mii->mii_media_active |= IFM_NONE;
163 mii->mii_media_status = 0;
164 return;
165 }
166
167 if (bmcr & BMCR_LOOP)
168 mii->mii_media_active |= IFM_LOOP;
169
170 if (bmcr & BMCR_AUTOEN) {
171 /*
172 * NWay autonegotiation takes the highest-order common
173 * bit of the ANAR and ANLPAR (i.e. best media advertised
174 * both by us and our link partner).
175 */
176 if ((bmsr & BMSR_ACOMP) == 0) {
177 /* Erg, still trying, I guess... */
178 mii->mii_media_active |= IFM_NONE;
179 return;
180 }
181
182 anlpar = PHY_READ(phy, MII_ANAR) & PHY_READ(phy, MII_ANLPAR);
183 /*
184 * ANLPAR doesn't get set on my card, but we check it anyway,
185 * since it is mentioned in the 78Q2120 specs.
186 */
187 if (anlpar & ANLPAR_TX_FD)
188 mii->mii_media_active |= IFM_100_TX|IFM_FDX;
189 else if (anlpar & ANLPAR_T4)
190 mii->mii_media_active |= IFM_100_T4|IFM_HDX;
191 else if (anlpar & ANLPAR_TX)
192 mii->mii_media_active |= IFM_100_TX|IFM_HDX;
193 else if (anlpar & ANLPAR_10_FD)
194 mii->mii_media_active |= IFM_10_T|IFM_FDX;
195 else if (anlpar & ANLPAR_10)
196 mii->mii_media_active |= IFM_10_T|IFM_HDX;
197 else {
198 /*
199 * ANLPAR isn't set, which leaves two possibilities:
200 * 1) Auto negotiation failed
201 * 2) Auto negotiation completed, but the card forgot
202 * to set ANLPAR.
203 * So we check the MII_DIAG(18) register...
204 */
205 diag = PHY_READ(phy, MII_DIAG);
206 if (diag & DIAG_NEGFAIL) /* assume 10baseT if no neg */
207 mii->mii_media_active |= IFM_10_T|IFM_HDX;
208 else {
209 if (diag & DIAG_DUPLEX)
210 mii->mii_media_active |= IFM_FDX;
211 else
212 mii->mii_media_active |= IFM_HDX;
213 if (diag & DIAG_RATE_100)
214 mii->mii_media_active |= IFM_100_TX;
215 else
216 mii->mii_media_active |= IFM_10_T;
217 }
218 }
219 if ((mii->mii_media_active & IFM_FDX) != 0)
220 mii->mii_media_active |= mii_phy_flowstatus(phy);
221 } else
222 mii->mii_media_active = ife->ifm_media;
223 }
Cache object: 6c085fc57c27cbc18639a2a65cd93909
|