FreeBSD/Linux Kernel Cross Reference
sys/dev/mii/xmphyreg.h
1 /*-
2 * Copyright (c) 2000
3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
31 *
32 * $FreeBSD$
33 */
34
35 #ifndef _DEV_MII_XMPHYREG_H_
36 #define _DEV_MII_XMPHYREG_H_
37
38 /*
39 * XaQti XMAC II PHY registers
40 */
41
42 #define XMPHY_MII_BMCR 0x00
43 #define XMPHY_BMCR_RESET 0x8000
44 #define XMPHY_BMCR_LOOP 0x4000
45 #define XMPHY_BMCR_AUTOEN 0x1000 /* Autoneg enabled */
46 #define XMPHY_BMCR_PDOWN 0x0800 /* Power down */
47 #define XMPHY_BMCR_ISO 0x0400 /* Isolate */
48 #define XMPHY_BMCR_STARTNEG 0x0200 /* Restart autoneg */
49 #define XMPHY_BMCR_FDX 0x0100 /* Duplex mode */
50
51 #define XMPHY_MII_BMSR 0x01
52 #define XMPHY_BMSR_EXTSTS 0x0100 /* Extended status present */
53 #define XMPHY_BMSR_ACOMP 0x0020 /* Autoneg complete */
54 #define XMPHY_BMSR_RFAULT 0x0010 /* Remote fault condition occurred */
55 #define XMPHY_BMSR_ANEG 0x0008 /* Autoneg capable */
56 #define XMPHY_BMSR_LINK 0x0004 /* Link status */
57 #define XMPHY_BMSR_EXT 0x0001 /* Extended capability */
58
59 #define XMPHY_MII_ANAR 0x04
60 #define XMPHY_ANAR_NP 0x8000 /* Next page */
61 #define XMPHY_ANAR_ACK 0x4000 /* Next page or base received */
62 #define XMPHY_ANAR_RFBITS 0x3000 /* Remote fault bits */
63 #define XMPHY_ANAR_PAUSEBITS 0x0180 /* Pause bits */
64 #define XMPHY_ANAR_HDX 0x0040 /* Select half duplex */
65 #define XMPHY_ANAR_FDX 0x0020 /* Select full duplex */
66
67 #define XMPHY_MII_ANLPAR 0x05
68 #define XMPHY_ANLPAR_NP 0x8000 /* Next page */
69 #define XMPHY_ANLPAR_ACK 0x4000 /* Next page or base received */
70 #define XMPHY_ANLPAR_RFBITS 0x3000 /* Remote fault bits */
71 #define XMPHY_ANLPAR_PAUSEBITS 0x0180 /* Pause bits */
72 #define XMPHY_ANLPAR_HDX 0x0040 /* Select half duplex */
73 #define XMPHY_ANLPAR_FDX 0x0020 /* Select full duplex */
74
75 #define XMPHY_RF_OK 0x0000 /* No error -- link is good */
76 #define XMPHY_RF_LINKFAIL 0x1000 /* Link failure */
77 #define XMPHY_RF_OFFLINE 0x2000 /* Offline */
78 #define XMPHY_RF_ANEGFAIL 0x3000 /* Autonegotiation error */
79
80 #define XMPHY_PAUSE_NOPAUSE 0x0000 /* No pause possible */
81 #define XMPHY_PAUSE_ASYMETRIC 0x0080 /* Asymetric pause toward LP */
82 #define XMPHY_PAUSE_SYMETRIC 0x0100 /* Symetric pause */
83 #define XMPHY_PAUSE_BOTH 0x0180 /* Both sym and asym pause */
84
85 #define XMPHY_MII_ANER 0x06
86 #define XMPHY_ANER_LPNP 0x0008 /* Link partner can next page */
87 #define XMPHY_ANER_NP 0x0004 /* Local PHY can next page */
88 #define XMPHY_ANER_RX 0x0002 /* Next page received */
89
90 #define XMPHY_MII_NEXTP 0x07 /* Next page */
91 #define XMPHY_NEXTP_MORE 0x8000 /* More next pages to follow */
92 #define XMPHY_NEXTP_ACK1 0x4000 /* Ack bit received OK */
93 #define XMPHY_NEXTP_MP 0x2000 /* Page is message page */
94 #define XMPHY_NEXTP_ACK2 0x1000 /* can comply with message (r/o) */
95 #define XMPHY_NEXTP_TOGGLE 0x0800 /* sync with LP */
96 #define XMPHY_NEXTP_MESSAGE 0x07FF /* message */
97
98 #define XMPHY_MII_NEXTPLP 0x08 /* Next page of link partner */
99 #define XMPHY_NEXTPLP_MORE 0x8000 /* More next pages to follow */
100 #define XMPHY_NEXTPLP_ACK1 0x4000 /* Ack bit received OK */
101 #define XMPHY_NEXTPLP_MP 0x2000 /* Page is message page */
102 #define XMPHY_NEXTPLP_ACK2 0x1000 /* can comply with message (r/o) */
103 #define XMPHY_NEXTPLP_TOGGLE 0x0800 /* sync with LP */
104 #define XMPHY_NEXTPLP_MESSAGE 0x07FF /* message */
105
106 #define XMPHY_MII_EXTSTS 0x0F /* Extended status */
107 #define XMPHY_EXTSTS_FDX 0x8000 /* 1000base-X FD capable */
108 #define XMPHY_EXTSTS_HDX 0x4000 /* 1000base-X HD capable */
109
110 #define XMPHY_MII_RESAB 0x10 /* Resolved ability */
111 #define XMPHY_RESAB_PAUSEBITS 0x0180 /* Pause bits */
112 #define XMPHY_RESAB_HDX 0x0040 /* Half duplex selected */
113 #define XMPHY_RESAB_FDX 0x0020 /* Full duplex selected */
114 #define XMPHY_RESAB_ABLMIS 0x0010 /* Ability mismatch */
115 #define XMPHY_RESAB_PAUSEMIS 0x0008 /* Pause mismatch */
116
117 #endif /* _DEV_MII_XMPHYREG_H_ */
Cache object: be7c1ab968df8738d893a527e0f681b0
|