FreeBSD/Linux Kernel Cross Reference
sys/dev/mse/mse_cbus.c
1 /*-
2 * Copyright (c) 2004 M. Warner Losh
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 *
26 * $FreeBSD: releng/11.2/sys/dev/mse/mse_cbus.c 272956 2014-10-11 19:36:59Z jhb $
27 */
28
29 /*-
30 * Copyright 1992 by the University of Guelph
31 *
32 * Permission to use, copy and modify this
33 * software and its documentation for any purpose and without
34 * fee is hereby granted, provided that the above copyright
35 * notice appear in all copies and that both that copyright
36 * notice and this permission notice appear in supporting
37 * documentation.
38 * University of Guelph makes no representations about the suitability of
39 * this software for any purpose. It is provided "as is"
40 * without express or implied warranty.
41 */
42 /*
43 * Driver for the Logitech and ATI Inport Bus mice for use with 386bsd and
44 * the X386 port, courtesy of
45 * Rick Macklem, rick@snowhite.cis.uoguelph.ca
46 * Caveats: The driver currently uses spltty(), but doesn't use any
47 * generic tty code. It could use splmse() (that only masks off the
48 * bus mouse interrupt, but that would require hacking in i386/isa/icu.s.
49 * (This may be worth the effort, since the Logitech generates 30/60
50 * interrupts/sec continuously while it is open.)
51 * NB: The ATI has NOT been tested yet!
52 */
53
54 /*
55 * Modification history:
56 * Sep 6, 1994 -- Lars Fredriksen(fredriks@mcs.com)
57 * improved probe based on input from Logitech.
58 *
59 * Oct 19, 1992 -- E. Stark (stark@cs.sunysb.edu)
60 * fixes to make it work with Microsoft InPort busmouse
61 *
62 * Jan, 1993 -- E. Stark (stark@cs.sunysb.edu)
63 * added patches for new "select" interface
64 *
65 * May 4, 1993 -- E. Stark (stark@cs.sunysb.edu)
66 * changed position of some spl()'s in mseread
67 *
68 * October 8, 1993 -- E. Stark (stark@cs.sunysb.edu)
69 * limit maximum negative x/y value to -127 to work around XFree problem
70 * that causes spurious button pushes.
71 */
72
73 #include <sys/param.h>
74 #include <sys/systm.h>
75 #include <sys/conf.h>
76 #include <sys/kernel.h>
77 #include <sys/module.h>
78 #include <sys/bus.h>
79 #include <sys/poll.h>
80 #include <sys/selinfo.h>
81 #include <sys/uio.h>
82 #include <sys/mouse.h>
83
84 #include <machine/bus.h>
85 #include <machine/resource.h>
86 #include <sys/rman.h>
87
88 #include <isa/isavar.h>
89
90 #include <dev/mse/msevar.h>
91
92 static int mse_cbus_probe(device_t dev);
93 static int mse_cbus_attach(device_t dev);
94
95 static device_method_t mse_methods[] = {
96 DEVMETHOD(device_probe, mse_cbus_probe),
97 DEVMETHOD(device_attach, mse_cbus_attach),
98 DEVMETHOD(device_detach, mse_detach),
99 { 0, 0 }
100 };
101
102 static driver_t mse_driver = {
103 "mse",
104 mse_methods,
105 sizeof(mse_softc_t),
106 };
107
108 DRIVER_MODULE(mse, isa, mse_driver, mse_devclass, 0, 0);
109
110 static struct isa_pnp_id mse_ids[] = {
111 #if 0
112 { 0x001fa3b8, "PC-98 bus mouse" }, /* NEC1F00 */
113 #endif
114 { 0 }
115 };
116
117 /*
118 * PC-9801 Bus mouse definitions
119 */
120
121 #define MODE MSE_PORTD
122 #define HC MSE_PORTD
123 #define INT MSE_PORTD
124
125 #define XL 0x00
126 #define XH 0x20
127 #define YL 0x40
128 #define YH 0x60
129
130 #define INT_ENABLE 0x8
131 #define INT_DISABLE 0x9
132 #define HC_NO_CLEAR 0xe
133 #define HC_CLEAR 0xf
134
135 static bus_addr_t mse_port[] = {0, 2, 4, 6};
136
137 static int mse_probe98m(device_t dev, mse_softc_t *sc);
138 static void mse_disable98m(struct resource *port);
139 static void mse_get98m(struct resource *port,
140 int *dx, int *dy, int *but);
141 static void mse_enable98m(struct resource *port);
142
143 static struct mse_types mse_types[] = {
144 { MSE_98BUSMOUSE,
145 mse_probe98m, mse_enable98m, mse_disable98m, mse_get98m,
146 { 2, MOUSE_IF_BUS, MOUSE_MOUSE, MOUSE_MODEL_GENERIC, 0, },
147 { MOUSE_PROTO_BUS, -1, -1, 0, 0, MOUSE_MSC_PACKETSIZE,
148 { MOUSE_MSC_SYNCMASK, MOUSE_MSC_SYNC, }, }, },
149 { 0, },
150 };
151
152 static int
153 mse_cbus_probe(device_t dev)
154 {
155 mse_softc_t *sc;
156 int error;
157 int rid;
158 int i;
159
160 /* check PnP IDs */
161 error = ISA_PNP_PROBE(device_get_parent(dev), dev, mse_ids);
162 if (error == ENXIO)
163 return error;
164
165 sc = device_get_softc(dev);
166 rid = 0;
167 sc->sc_port = isa_alloc_resourcev(dev, SYS_RES_IOPORT, &rid, mse_port,
168 MSE_IOSIZE, RF_ACTIVE);
169 if (sc->sc_port == NULL)
170 return ENXIO;
171 if (isa_load_resourcev(sc->sc_port, mse_port, MSE_IOSIZE)) {
172 bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
173 return ENXIO;
174 }
175
176 /*
177 * Check for each mouse type in the table.
178 */
179 i = 0;
180 while (mse_types[i].m_type) {
181 if ((*mse_types[i].m_probe)(dev, sc)) {
182 sc->sc_mousetype = mse_types[i].m_type;
183 sc->sc_enablemouse = mse_types[i].m_enable;
184 sc->sc_disablemouse = mse_types[i].m_disable;
185 sc->sc_getmouse = mse_types[i].m_get;
186 sc->hw = mse_types[i].m_hw;
187 sc->mode = mse_types[i].m_mode;
188 bus_release_resource(dev, SYS_RES_IOPORT, rid,
189 sc->sc_port);
190 device_set_desc(dev, "Bus/InPort Mouse");
191 return 0;
192 }
193 i++;
194 }
195 bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
196 return ENXIO;
197 }
198
199 static int
200 mse_cbus_attach(device_t dev)
201 {
202 mse_softc_t *sc;
203 int rid;
204
205 sc = device_get_softc(dev);
206
207 rid = 0;
208 sc->sc_port = isa_alloc_resourcev(dev, SYS_RES_IOPORT, &rid, mse_port,
209 MSE_IOSIZE, RF_ACTIVE);
210 if (sc->sc_port == NULL)
211 return ENXIO;
212 if (isa_load_resourcev(sc->sc_port, mse_port, MSE_IOSIZE)) {
213 bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
214 return ENXIO;
215 }
216
217 return (mse_common_attach(dev));
218 }
219
220 /*
221 * Routines for the PC98 bus mouse.
222 */
223
224 /*
225 * Test for a PC98 bus mouse and return 1 if it is.
226 * (do not enable interrupts)
227 */
228 static int
229 mse_probe98m(device_t dev, mse_softc_t *sc)
230 {
231 /* mode set */
232 bus_write_1(sc->sc_port, MODE, 0x93);
233
234 /* initialize */
235 /* INT disable */
236 bus_write_1(sc->sc_port, INT, INT_DISABLE);
237 /* HC = 0 */
238 bus_write_1(sc->sc_port, HC, HC_NO_CLEAR);
239 /* HC = 1 */
240 bus_write_1(sc->sc_port, HC, HC_CLEAR);
241
242 return (1);
243 }
244
245 /*
246 * Initialize PC98 bus mouse and enable interrupts.
247 */
248 static void
249 mse_enable98m(struct resource *port)
250 {
251 bus_write_1(port, INT, INT_ENABLE); /* INT enable */
252 bus_write_1(port, HC, HC_NO_CLEAR); /* HC = 0 */
253 bus_write_1(port, HC, HC_CLEAR); /* HC = 1 */
254 }
255
256 /*
257 * Disable interrupts for PC98 Bus mouse.
258 */
259 static void
260 mse_disable98m(struct resource *port)
261 {
262 bus_write_1(port, INT, INT_DISABLE); /* INT disable */
263 bus_write_1(port, HC, HC_NO_CLEAR); /* HC = 0 */
264 bus_write_1(port, HC, HC_CLEAR); /* HC = 1 */
265 }
266
267 /*
268 * Get current dx, dy and up/down button state.
269 */
270 static void
271 mse_get98m(struct resource *port, int *dx, int *dy, int *but)
272 {
273 register char x, y;
274
275 bus_write_1(port, INT, INT_DISABLE); /* INT disable */
276
277 bus_write_1(port, HC, HC_CLEAR); /* HC = 1 */
278
279 /* X low */
280 bus_write_1(port, MSE_PORTC, 0x90 | XL);
281 x = bus_read_1(port, MSE_PORTA) & 0x0f;
282 /* X high */
283 bus_write_1(port, MSE_PORTC, 0x90 | XH);
284 x |= ((bus_read_1(port, MSE_PORTA) & 0x0f) << 4);
285
286 /* Y low */
287 bus_write_1(port, MSE_PORTC, 0x90 | YL);
288 y = (bus_read_1(port, MSE_PORTA) & 0x0f);
289 /* Y high */
290 bus_write_1(port, MSE_PORTC, 0x90 | YH);
291 y |= ((bus_read_1(port, MSE_PORTA) & 0x0f) << 4);
292
293 *but = (bus_read_1(port, MSE_PORTA) >> 5) & 7;
294
295 *dx = x;
296 *dy = y;
297
298 bus_write_1(port, HC, HC_NO_CLEAR); /* HC = 0 */
299
300 bus_write_1(port, INT, INT_ENABLE); /* INT enable */
301 }
Cache object: 277aa504561cbc2f69bee0fe5053ac20
|