Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/dev/pms/RefTisa/tisa/sassata/sata/host/satproto.h
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 /******************************************************************************* 2 *Copyright (c) 2014 PMC-Sierra, Inc. All rights reserved. 3 * 4 *Redistribution and use in source and binary forms, with or without modification, are permitted provided 5 *that the following conditions are met: 6 *1. Redistributions of source code must retain the above copyright notice, this list of conditions and the 7 *following disclaimer. 8 *2. Redistributions in binary form must reproduce the above copyright notice, 9 *this list of conditions and the following disclaimer in the documentation and/or other materials provided 10 *with the distribution. 11 * 12 *THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED 13 *WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 14 *FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 15 *FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 16 *NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 17 *BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 18 *LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 19 *SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 20 * 21 * $FreeBSD$ 22 * 23 ********************************************************************************/ 24 /*******************************************************************************/ 25 /** \file 26 * 27 * 28 * The file contaning function protoptype used by SAT layer. 29 * 30 */ 31 32 #ifndef __SATPROTO_H__ 33 #define __SATPROTO_H__ 34 35 36 /***************************************************************************** 37 *! \brief itdsatProcessAbnormalCompletion 38 * 39 * This routine is called to complete error case for SATA request previously 40 * issued to the LL Layer in saSATAStart() 41 * 42 * \param agRoot: Handles for this instance of SAS/SATA hardware 43 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 44 * \param agIOStatus: Status of completed I/O. 45 * \param agSATAParm1: Additional info based on status. 46 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 47 * length. 48 * \param satIOContext: Pointer to satIOContext_t. 49 * 50 * \return: none 51 * 52 *****************************************************************************/ 53 void itdsatProcessAbnormalCompletion( 54 agsaRoot_t *agRoot, 55 agsaIORequest_t *agIORequest, 56 bit32 agIOStatus, 57 agsaFisHeader_t *agFirstDword, 58 bit32 agIOInfoLen, 59 agsaFrameHandle_t agFrameHandle, 60 satIOContext_t *satIOContext 61 ); 62 void itdsatDelayedProcessAbnormalCompletion( 63 agsaRoot_t *agRoot, 64 agsaIORequest_t *agIORequest, 65 bit32 agIOStatus, 66 agsaFisHeader_t *agFirstDword, 67 bit32 agIOInfoLen, 68 agsaFrameHandle_t agFrameHandle, 69 satIOContext_t *satIOContext 70 ); 71 72 void itdsatErrorSATAEventHandle( 73 agsaRoot_t *agRoot, 74 agsaIORequest_t *agIORequest, 75 agsaPortContext_t *agPortContext, 76 agsaDevHandle_t *agDevHandle, 77 bit32 event, 78 satIOContext_t *ioContext 79 ); 80 81 void itdsatEncryptionHandler ( 82 agsaRoot_t *agRoot, 83 agsaIORequest_t *agIORequest, 84 bit32 agIOStatus, 85 bit32 agIOInfoLen, 86 void *agParam, 87 bit32 agOtherInfo 88 ); 89 90 osGLOBAL void 91 itdsatDifHandler( 92 agsaRoot_t *agRoot, 93 agsaIORequest_t *agIORequest, 94 bit32 agIOStatus, 95 bit32 agIOInfoLen, 96 void *agParam, 97 bit32 agOtherInfo 98 ); 99 100 void satProcessAbort( 101 tiRoot_t *tiRoot, 102 tiIORequest_t *tiIORequest, 103 satIOContext_t *satIOContext 104 ); 105 /*****************************************************************************/ 106 /*! \brief Setup up the SCSI Sense response. 107 * 108 * This function is used to setup up the Sense Data payload for 109 * CHECK CONDITION status. 110 * 111 * \param pSense: Pointer to the scsiRspSense_t sense data structure. 112 * \param SnsKey: SCSI Sense Key. 113 * \param SnsInfo: SCSI Sense Info. 114 * \param SnsCode: SCSI Sense Code. 115 * 116 * \return None 117 */ 118 /*****************************************************************************/ 119 120 void satSetSensePayload( scsiRspSense_t *pSense, 121 bit8 SnsKey, 122 bit32 SnsInfo, 123 bit16 SnsCode, 124 satIOContext_t *satIOContext); 125 126 127 /*****************************************************************************/ 128 /*! \brief Setup up the SCSI Sense response. 129 * 130 * This function is used to setup up the Sense Data payload for 131 * CHECK CONDITION status. 132 * 133 * \param pSense: Pointer to the scsiRspSense_t sense data structure. 134 * \param SnsKey: SCSI Sense Key. 135 * \param SnsInfo: SCSI Sense Info. 136 * \param SnsCode: SCSI Sense Code. 137 * 138 * \return None 139 */ 140 /*****************************************************************************/ 141 142 void satSetDeferredSensePayload( scsiRspSense_t *pSense, 143 bit8 SnsKey, 144 bit32 SnsInfo, 145 bit16 SnsCode, 146 satIOContext_t *satIOContext 147 ); 148 149 /*****************************************************************************/ 150 /*! \brief SAT implementation for ATAPI Packet Command. 151 * 152 * SAT implementation for ATAPI Packet and send FIS request to LL layer. 153 * 154 * \param tiRoot: Pointer to TISA initiator driver/port instance. 155 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 156 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 157 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 158 * \param satIOContext_t: Pointer to the SAT IO Context 159 * 160 * \return If command is started successfully 161 * - \e tiSuccess: I/O request successfully initiated. 162 * - \e tiBusy: No resources available, try again later. 163 * - \e tiIONoDevice: Invalid device handle. 164 * - \e tiError: Other errors. 165 */ 166 /*****************************************************************************/ 167 GLOBAL bit32 satPacket( 168 tiRoot_t *tiRoot, 169 tiIORequest_t *tiIORequest, 170 tiDeviceHandle_t *tiDeviceHandle, 171 tiScsiInitiatorRequest_t *tiScsiRequest, 172 satIOContext_t *satIOContext); 173 174 void satPacketCB( 175 agsaRoot_t *agRoot, 176 agsaIORequest_t *agIORequest, 177 bit32 agIOStatus, 178 agsaFisHeader_t *agFirstDword, 179 bit32 agIOInfoLen, 180 void *agParam, 181 void *ioContext 182 ); 183 /*****************************************************************************/ 184 /*! \brief SAT implementation for satDeviceReset. 185 * 186 * This function creates DEVICE RESET fis and sends the request to LL layer 187 * 188 * \param tiRoot: Pointer to TISA initiator driver/port instance. 189 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 190 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 191 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 192 * \param satIOContext_t: Pointer to the SAT IO Context 193 * 194 * \return If command is started successfully 195 * - \e tiSuccess: I/O request successfully initiated. 196 * - \e tiBusy: No resources available, try again later. 197 * - \e tiIONoDevice: Invalid device handle. 198 * - \e tiError: Other errors. 199 */ 200 /*****************************************************************************/ 201 GLOBAL bit32 satDeviceReset( 202 tiRoot_t *tiRoot, 203 tiIORequest_t *tiIORequest, 204 tiDeviceHandle_t *tiDeviceHandle, 205 tiScsiInitiatorRequest_t *tiScsiRequest, 206 satIOContext_t *satIOContext 207 ); 208 209 void satDeviceResetCB( 210 agsaRoot_t *agRoot, 211 agsaIORequest_t *agIORequest, 212 bit32 agIOStatus, 213 agsaFisHeader_t *agFirstDword, 214 bit32 agIOInfoLen, 215 void *agParam, 216 void *ioContext 217 ); 218 219 /*****************************************************************************/ 220 /*! \brief SAT implementation for satExecuteDeviceDiagnostic. 221 * 222 * This function creates Execute Device Diagnostic fis and sends the request to LL layer 223 * 224 * \param tiRoot: Pointer to TISA initiator driver/port instance. 225 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 226 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 227 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 228 * \param satIOContext_t: Pointer to the SAT IO Context 229 * 230 * \return If command is started successfully 231 * - \e tiSuccess: I/O request successfully initiated. 232 * - \e tiBusy: No resources available, try again later. 233 * - \e tiIONoDevice: Invalid device handle. 234 * - \e tiError: Other errors. 235 */ 236 /*****************************************************************************/ 237 GLOBAL bit32 satExecuteDeviceDiagnostic( 238 tiRoot_t *tiRoot, 239 tiIORequest_t *tiIORequest, 240 tiDeviceHandle_t *tiDeviceHandle, 241 tiScsiInitiatorRequest_t *tiScsiRequest, 242 satIOContext_t *satIOContext 243 ); 244 245 void satExecuteDeviceDiagnosticCB( 246 agsaRoot_t *agRoot, 247 agsaIORequest_t *agIORequest, 248 bit32 agIOStatus, 249 agsaFisHeader_t *agFirstDword, 250 bit32 agIOInfoLen, 251 void *agParam, 252 void *ioContext 253 ); 254 255 /*****************************************************************************/ 256 /*! \brief SAT implementation for satSetFeatures. 257 * 258 * This function creates SetFeatures fis and sends the request to LL layer 259 * 260 * \param tiRoot: Pointer to TISA initiator driver/port instance. 261 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 262 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 263 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 264 * \param satIOContext_t: Pointer to the SAT IO Context 265 * 266 * \return If command is started successfully 267 * - \e tiSuccess: I/O request successfully initiated. 268 * - \e tiBusy: No resources available, try again later. 269 * - \e tiIONoDevice: Invalid device handle. 270 * - \e tiError: Other errors. 271 */ 272 /*****************************************************************************/ 273 GLOBAL bit32 satSetFeatures( 274 tiRoot_t *tiRoot, 275 tiIORequest_t *tiIORequest, 276 tiDeviceHandle_t *tiDeviceHandle, 277 tiScsiInitiatorRequest_t *tiScsiRequest, 278 satIOContext_t *satIOContext, 279 bit8 bTransferMode 280 ); 281 void satSetFeaturesPIOCB( 282 agsaRoot_t *agRoot, 283 agsaIORequest_t *agIORequest, 284 bit32 agIOStatus, 285 agsaFisHeader_t *agFirstDword, 286 bit32 agIOInfoLen, 287 void *agParam, 288 void *ioContext 289 ); 290 291 void satSetFeaturesCB( 292 agsaRoot_t *agRoot, 293 agsaIORequest_t *agIORequest, 294 bit32 agIOStatus, 295 agsaFisHeader_t *agFirstDword, 296 bit32 agIOInfoLen, 297 void *agParam, 298 void *ioContext 299 ); 300 /*****************************************************************************/ 301 /*! \brief SAT implementation for SCSI REQUEST SENSE to ATAPI device. 302 * 303 * SAT implementation for SCSI REQUEST SENSE. 304 * 305 * \param tiRoot: Pointer to TISA initiator driver/port instance. 306 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 307 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 308 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 309 * \param satIOContext_t: Pointer to the SAT IO Context 310 * 311 * \return If command is started successfully 312 * - \e tiSuccess: I/O request successfully initiated. 313 * - \e tiBusy: No resources available, try again later. 314 * - \e tiIONoDevice: Invalid device handle. 315 * - \e tiError: Other errors. 316 */ 317 /*****************************************************************************/ 318 GLOBAL bit32 satRequestSenseForATAPI( 319 tiRoot_t *tiRoot, 320 tiIORequest_t *tiIORequest, 321 tiDeviceHandle_t *tiDeviceHandle, 322 tiScsiInitiatorRequest_t *tiScsiRequest, 323 satIOContext_t *satIOContext); 324 325 void satRequestSenseForATAPICB( 326 agsaRoot_t *agRoot, 327 agsaIORequest_t *agIORequest, 328 bit32 agIOStatus, 329 agsaFisHeader_t *agFirstDword, 330 bit32 agIOInfoLen, 331 void *agParam, 332 void *ioContext 333 ); 334 335 /*****************************************************************************/ 336 /*! \brief SAT implementation for SCSI READ12. 337 * 338 * SAT implementation for SCSI READ12 and send FIS request to LL layer. 339 * 340 * \param tiRoot: Pointer to TISA initiator driver/port instance. 341 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 342 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 343 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 344 * \param satIOContext_t: Pointer to the SAT IO Context 345 * 346 * \return If command is started successfully 347 * - \e tiSuccess: I/O request successfully initiated. 348 * - \e tiBusy: No resources available, try again later. 349 * - \e tiIONoDevice: Invalid device handle. 350 * - \e tiError: Other errors. 351 */ 352 /*****************************************************************************/ 353 GLOBAL bit32 satRead12( 354 tiRoot_t *tiRoot, 355 tiIORequest_t *tiIORequest, 356 tiDeviceHandle_t *tiDeviceHandle, 357 tiScsiInitiatorRequest_t *tiScsiRequest, 358 satIOContext_t *satIOContext); 359 360 /*****************************************************************************/ 361 /*! \brief SAT implementation for SCSI READ10. 362 * 363 * SAT implementation for SCSI READ10 and send FIS request to LL layer. 364 * 365 * \param tiRoot: Pointer to TISA initiator driver/port instance. 366 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 367 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 368 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 369 * \param satIOContext_t: Pointer to the SAT IO Context 370 * 371 * \return If command is started successfully 372 * - \e tiSuccess: I/O request successfully initiated. 373 * - \e tiBusy: No resources available, try again later. 374 * - \e tiIONoDevice: Invalid device handle. 375 * - \e tiError: Other errors. 376 */ 377 /*****************************************************************************/ 378 GLOBAL bit32 satRead10( 379 tiRoot_t *tiRoot, 380 tiIORequest_t *tiIORequest, 381 tiDeviceHandle_t *tiDeviceHandle, 382 tiScsiInitiatorRequest_t *tiScsiRequest, 383 satIOContext_t *satIOContext); 384 385 386 /*****************************************************************************/ 387 /*! \brief SAT implementation for SCSI READ16. 388 * 389 * SAT implementation for SCSI READ16 and send FIS request to LL layer. 390 * 391 * \param tiRoot: Pointer to TISA initiator driver/port instance. 392 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 393 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 394 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 395 * \param satIOContext_t: Pointer to the SAT IO Context 396 * 397 * \return If command is started successfully 398 * - \e tiSuccess: I/O request successfully initiated. 399 * - \e tiBusy: No resources available, try again later. 400 * - \e tiIONoDevice: Invalid device handle. 401 * - \e tiError: Other errors. 402 */ 403 /*****************************************************************************/ 404 GLOBAL bit32 satRead16( 405 tiRoot_t *tiRoot, 406 tiIORequest_t *tiIORequest, 407 tiDeviceHandle_t *tiDeviceHandle, 408 tiScsiInitiatorRequest_t *tiScsiRequest, 409 satIOContext_t *satIOContext); 410 /*****************************************************************************/ 411 /*! \brief SAT implementation for SCSI READ6. 412 * 413 * SAT implementation for SCSI READ6 and send FIS request to LL layer. 414 * 415 * \param tiRoot: Pointer to TISA initiator driver/port instance. 416 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 417 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 418 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 419 * \param satIOContext_t: Pointer to the SAT IO Context 420 * 421 * \return If command is started successfully 422 * - \e tiSuccess: I/O request successfully initiated. 423 * - \e tiBusy: No resources available, try again later. 424 * - \e tiIONoDevice: Invalid device handle. 425 * - \e tiError: Other errors. 426 */ 427 /*****************************************************************************/ 428 GLOBAL bit32 satRead6( 429 tiRoot_t *tiRoot, 430 tiIORequest_t *tiIORequest, 431 tiDeviceHandle_t *tiDeviceHandle, 432 tiScsiInitiatorRequest_t *tiScsiRequest, 433 satIOContext_t *satIOContext); 434 435 /*****************************************************************************/ 436 /*! \brief SAT implementation for SCSI WRITE16. 437 * 438 * SAT implementation for SCSI WRITE16 and send FIS request to LL layer. 439 * 440 * \param tiRoot: Pointer to TISA initiator driver/port instance. 441 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 442 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 443 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 444 * \param satIOContext_t: Pointer to the SAT IO Context 445 * 446 * \return If command is started successfully 447 * - \e tiSuccess: I/O request successfully initiated. 448 * - \e tiBusy: No resources available, try again later. 449 * - \e tiIONoDevice: Invalid device handle. 450 * - \e tiError: Other errors. 451 */ 452 /*****************************************************************************/ 453 GLOBAL bit32 satWrite16( 454 tiRoot_t *tiRoot, 455 tiIORequest_t *tiIORequest, 456 tiDeviceHandle_t *tiDeviceHandle, 457 tiScsiInitiatorRequest_t *tiScsiRequest, 458 satIOContext_t *satIOContext); 459 460 /*****************************************************************************/ 461 /*! \brief SAT implementation for SCSI WRITE12. 462 * 463 * SAT implementation for SCSI WRITE12 and send FIS request to LL layer. 464 * 465 * \param tiRoot: Pointer to TISA initiator driver/port instance. 466 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 467 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 468 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 469 * \param satIOContext_t: Pointer to the SAT IO Context 470 * 471 * \return If command is started successfully 472 * - \e tiSuccess: I/O request successfully initiated. 473 * - \e tiBusy: No resources available, try again later. 474 * - \e tiIONoDevice: Invalid device handle. 475 * - \e tiError: Other errors. 476 */ 477 /*****************************************************************************/ 478 GLOBAL bit32 satWrite12( 479 tiRoot_t *tiRoot, 480 tiIORequest_t *tiIORequest, 481 tiDeviceHandle_t *tiDeviceHandle, 482 tiScsiInitiatorRequest_t *tiScsiRequest, 483 satIOContext_t *satIOContext); 484 485 /*****************************************************************************/ 486 /*! \brief SAT implementation for SCSI WRITE10. 487 * 488 * SAT implementation for SCSI WRITE10 and send FIS request to LL layer. 489 * 490 * \param tiRoot: Pointer to TISA initiator driver/port instance. 491 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 492 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 493 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 494 * \param satIOContext_t: Pointer to the SAT IO Context 495 * 496 * \return If command is started successfully 497 * - \e tiSuccess: I/O request successfully initiated. 498 * - \e tiBusy: No resources available, try again later. 499 * - \e tiIONoDevice: Invalid device handle. 500 * - \e tiError: Other errors. 501 */ 502 /*****************************************************************************/ 503 GLOBAL bit32 satWrite10( 504 tiRoot_t *tiRoot, 505 tiIORequest_t *tiIORequest, 506 tiDeviceHandle_t *tiDeviceHandle, 507 tiScsiInitiatorRequest_t *tiScsiRequest, 508 satIOContext_t *satIOContext); 509 GLOBAL bit32 satWrite_1( 510 tiRoot_t *tiRoot, 511 tiIORequest_t *tiIORequest, 512 tiDeviceHandle_t *tiDeviceHandle, 513 tiScsiInitiatorRequest_t *tiScsiRequest, 514 satIOContext_t *satIOContext); 515 516 517 /*****************************************************************************/ 518 /*! \brief SAT implementation for SCSI WRITE6. 519 * 520 * SAT implementation for SCSI WRITE6 and send FIS request to LL layer. 521 * 522 * \param tiRoot: Pointer to TISA initiator driver/port instance. 523 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 524 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 525 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 526 * \param satIOContext_t: Pointer to the SAT IO Context 527 * 528 * \return If command is started successfully 529 * - \e tiSuccess: I/O request successfully initiated. 530 * - \e tiBusy: No resources available, try again later. 531 * - \e tiIONoDevice: Invalid device handle. 532 * - \e tiError: Other errors. 533 */ 534 /*****************************************************************************/ 535 GLOBAL bit32 satWrite6( 536 tiRoot_t *tiRoot, 537 tiIORequest_t *tiIORequest, 538 tiDeviceHandle_t *tiDeviceHandle, 539 tiScsiInitiatorRequest_t *tiScsiRequest, 540 satIOContext_t *satIOContext); 541 542 543 /*****************************************************************************/ 544 /*! \brief SAT implementation for SCSI satReportLun. 545 * 546 * SAT implementation for SCSI satReportLun. Only LUN0 is reported. 547 * 548 * \param tiRoot: Pointer to TISA initiator driver/port instance. 549 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 550 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 551 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 552 * \param satIOContext_t: Pointer to the SAT IO Context 553 * 554 * \return If command is started successfully 555 * - \e tiSuccess: I/O request successfully initiated. 556 * - \e tiBusy: No resources available, try again later. 557 * - \e tiIONoDevice: Invalid device handle. 558 * - \e tiError: Other errors. 559 */ 560 /*****************************************************************************/ 561 GLOBAL bit32 satReportLun( 562 tiRoot_t *tiRoot, 563 tiIORequest_t *tiIORequest, 564 tiDeviceHandle_t *tiDeviceHandle, 565 tiScsiInitiatorRequest_t *tiScsiRequest, 566 satIOContext_t *satIOContext); 567 568 569 /*****************************************************************************/ 570 /*! \brief SAT implementation for SCSI satReadCapacity10. 571 * 572 * SAT implementation for SCSI satReadCapacity10. 573 * 574 * \param tiRoot: Pointer to TISA initiator driver/port instance. 575 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 576 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 577 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 578 * \param satIOContext_t: Pointer to the SAT IO Context 579 * 580 * \return If command is started successfully 581 * - \e tiSuccess: I/O request successfully initiated. 582 * - \e tiBusy: No resources available, try again later. 583 * - \e tiIONoDevice: Invalid device handle. 584 * - \e tiError: Other errors. 585 */ 586 /*****************************************************************************/ 587 GLOBAL bit32 satReadCapacity10( 588 tiRoot_t *tiRoot, 589 tiIORequest_t *tiIORequest, 590 tiDeviceHandle_t *tiDeviceHandle, 591 tiScsiInitiatorRequest_t *tiScsiRequest, 592 satIOContext_t *satIOContext); 593 594 /*****************************************************************************/ 595 /*! \brief SAT implementation for SCSI satReadCapacity16. 596 * 597 * SAT implementation for SCSI satReadCapacity16. 598 * 599 * \param tiRoot: Pointer to TISA initiator driver/port instance. 600 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 601 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 602 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 603 * \param satIOContext_t: Pointer to the SAT IO Context 604 * 605 * \return If command is started successfully 606 * - \e tiSuccess: I/O request successfully initiated. 607 * - \e tiBusy: No resources available, try again later. 608 * - \e tiIONoDevice: Invalid device handle. 609 * - \e tiError: Other errors. 610 */ 611 /*****************************************************************************/ 612 GLOBAL bit32 satReadCapacity16( 613 tiRoot_t *tiRoot, 614 tiIORequest_t *tiIORequest, 615 tiDeviceHandle_t *tiDeviceHandle, 616 tiScsiInitiatorRequest_t *tiScsiRequest, 617 satIOContext_t *satIOContext); 618 619 620 GLOBAL bit32 satInquiry( 621 tiRoot_t *tiRoot, 622 tiIORequest_t *tiIORequest, 623 tiDeviceHandle_t *tiDeviceHandle, 624 tiScsiInitiatorRequest_t *tiScsiRequest, 625 satIOContext_t *satIOContext); 626 627 /*****************************************************************************/ 628 /*! \brief SAT implementation for SCSI REQUEST SENSE. 629 * 630 * SAT implementation for SCSI REQUEST SENSE. 631 * 632 * \param tiRoot: Pointer to TISA initiator driver/port instance. 633 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 634 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 635 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 636 * \param satIOContext_t: Pointer to the SAT IO Context 637 * 638 * \return If command is started successfully 639 * - \e tiSuccess: I/O request successfully initiated. 640 * - \e tiBusy: No resources available, try again later. 641 * - \e tiIONoDevice: Invalid device handle. 642 * - \e tiError: Other errors. 643 */ 644 /*****************************************************************************/ 645 GLOBAL bit32 satRequestSense( 646 tiRoot_t *tiRoot, 647 tiIORequest_t *tiIORequest, 648 tiDeviceHandle_t *tiDeviceHandle, 649 tiScsiInitiatorRequest_t *tiScsiRequest, 650 satIOContext_t *satIOContext); 651 /*****************************************************************************/ 652 /*! \brief SAT implementation for SCSI REQUEST SENSE. 653 * 654 * SAT implementation for SCSI REQUEST SENSE. 655 * Sub function of satRequestSense 656 * 657 * \param tiRoot: Pointer to TISA initiator driver/port instance. 658 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 659 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 660 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 661 * \param satIOContext_t: Pointer to the SAT IO Context 662 * 663 * \return If command is started successfully 664 * - \e tiSuccess: I/O request successfully initiated. 665 * - \e tiBusy: No resources available, try again later. 666 * - \e tiIONoDevice: Invalid device handle. 667 * - \e tiError: Other errors. 668 */ 669 /*****************************************************************************/ 670 GLOBAL bit32 satRequestSense_1( 671 tiRoot_t *tiRoot, 672 tiIORequest_t *tiIORequest, 673 tiDeviceHandle_t *tiDeviceHandle, 674 tiScsiInitiatorRequest_t *tiScsiRequest, 675 satIOContext_t *satIOContext); 676 677 /*****************************************************************************/ 678 /*! \brief SAT implementation for SCSI satFormatUnit. 679 * 680 * SAT implementation for SCSI satFormatUnit. 681 * 682 * \param tiRoot: Pointer to TISA initiator driver/port instance. 683 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 684 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 685 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 686 * \param satIOContext_t: Pointer to the SAT IO Context 687 * 688 * \return If command is started successfully 689 * - \e tiSuccess: I/O request successfully initiated. 690 * - \e tiBusy: No resources available, try again later. 691 * - \e tiIONoDevice: Invalid device handle. 692 * - \e tiError: Other errors. 693 */ 694 /*****************************************************************************/ 695 GLOBAL bit32 satFormatUnit( 696 tiRoot_t *tiRoot, 697 tiIORequest_t *tiIORequest, 698 tiDeviceHandle_t *tiDeviceHandle, 699 tiScsiInitiatorRequest_t *tiScsiRequest, 700 satIOContext_t *satIOContext); 701 702 /*****************************************************************************/ 703 /*! \brief SAT implementation for SCSI satSendDiagnostic. 704 * 705 * SAT implementation for SCSI satSendDiagnostic. 706 * 707 * \param tiRoot: Pointer to TISA initiator driver/port instance. 708 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 709 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 710 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 711 * \param satIOContext_t: Pointer to the SAT IO Context 712 * 713 * \return If command is started successfully 714 * - \e tiSuccess: I/O request successfully initiated. 715 * - \e tiBusy: No resources available, try again later. 716 * - \e tiIONoDevice: Invalid device handle. 717 * - \e tiError: Other errors. 718 */ 719 /*****************************************************************************/ 720 GLOBAL bit32 satSendDiagnostic( 721 tiRoot_t *tiRoot, 722 tiIORequest_t *tiIORequest, 723 tiDeviceHandle_t *tiDeviceHandle, 724 tiScsiInitiatorRequest_t *tiScsiRequest, 725 satIOContext_t *satIOContext); 726 727 /*****************************************************************************/ 728 /*! \brief SAT implementation for SCSI satSendDiagnostic_1. 729 * 730 * SAT implementation for SCSI satSendDiagnostic_1. 731 * Sub function of satSendDiagnostic. 732 * 733 * \param tiRoot: Pointer to TISA initiator driver/port instance. 734 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 735 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 736 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 737 * \param satIOContext_t: Pointer to the SAT IO Context 738 * 739 * \return If command is started successfully 740 * - \e tiSuccess: I/O request successfully initiated. 741 * - \e tiBusy: No resources available, try again later. 742 * - \e tiIONoDevice: Invalid device handle. 743 * - \e tiError: Other errors. 744 */ 745 /*****************************************************************************/ 746 GLOBAL bit32 satSendDiagnostic_1( 747 tiRoot_t *tiRoot, 748 tiIORequest_t *tiIORequest, 749 tiDeviceHandle_t *tiDeviceHandle, 750 tiScsiInitiatorRequest_t *tiScsiRequest, 751 satIOContext_t *satIOContext); 752 /*****************************************************************************/ 753 /*! \brief SAT implementation for SCSI satSendDiagnostic_2. 754 * 755 * SAT implementation for SCSI satSendDiagnostic_2. 756 * Sub function of satSendDiagnostic. 757 * 758 * \param tiRoot: Pointer to TISA initiator driver/port instance. 759 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 760 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 761 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 762 * \param satIOContext_t: Pointer to the SAT IO Context 763 * 764 * \return If command is started successfully 765 * - \e tiSuccess: I/O request successfully initiated. 766 * - \e tiBusy: No resources available, try again later. 767 * - \e tiIONoDevice: Invalid device handle. 768 * - \e tiError: Other errors. 769 */ 770 /*****************************************************************************/ 771 GLOBAL bit32 satSendDiagnostic_2( 772 tiRoot_t *tiRoot, 773 tiIORequest_t *tiIORequest, 774 tiDeviceHandle_t *tiDeviceHandle, 775 tiScsiInitiatorRequest_t *tiScsiRequest, 776 satIOContext_t *satIOContext); 777 778 /*****************************************************************************/ 779 /*! \brief SAT implementation for SCSI satStartStopUnit. 780 * 781 * SAT implementation for SCSI satStartStopUnit. 782 * 783 * \param tiRoot: Pointer to TISA initiator driver/port instance. 784 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 785 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 786 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 787 * \param satIOContext_t: Pointer to the SAT IO Context 788 * 789 * \return If command is started successfully 790 * - \e tiSuccess: I/O request successfully initiated. 791 * - \e tiBusy: No resources available, try again later. 792 * - \e tiIONoDevice: Invalid device handle. 793 * - \e tiError: Other errors. 794 */ 795 /*****************************************************************************/ 796 GLOBAL bit32 satStartStopUnit( 797 tiRoot_t *tiRoot, 798 tiIORequest_t *tiIORequest, 799 tiDeviceHandle_t *tiDeviceHandle, 800 tiScsiInitiatorRequest_t *tiScsiRequest, 801 satIOContext_t *satIOContext); 802 /*****************************************************************************/ 803 /*! \brief SAT implementation for SCSI satStartStopUnit_1. 804 * 805 * SAT implementation for SCSI satStartStopUnit_1. 806 * Sub function of satStartStopUnit 807 * 808 * \param tiRoot: Pointer to TISA initiator driver/port instance. 809 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 810 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 811 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 812 * \param satIOContext_t: Pointer to the SAT IO Context 813 * 814 * \return If command is started successfully 815 * - \e tiSuccess: I/O request successfully initiated. 816 * - \e tiBusy: No resources available, try again later. 817 * - \e tiIONoDevice: Invalid device handle. 818 * - \e tiError: Other errors. 819 */ 820 /*****************************************************************************/ 821 GLOBAL bit32 satStartStopUnit_1( 822 tiRoot_t *tiRoot, 823 tiIORequest_t *tiIORequest, 824 tiDeviceHandle_t *tiDeviceHandle, 825 tiScsiInitiatorRequest_t *tiScsiRequest, 826 satIOContext_t *satIOContext); 827 828 /*****************************************************************************/ 829 /*! \brief SAT implementation for SCSI satRead10_1. 830 * 831 * SAT implementation for SCSI satRead10_1 832 * Sub function of satRead10 833 * 834 * \param tiRoot: Pointer to TISA initiator driver/port instance. 835 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 836 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 837 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 838 * \param satIOContext_t: Pointer to the SAT IO Context 839 * 840 * \return If command is started successfully 841 * - \e tiSuccess: I/O request successfully initiated. 842 * - \e tiBusy: No resources available, try again later. 843 * - \e tiIONoDevice: Invalid device handle. 844 * - \e tiError: Other errors. 845 */ 846 /*****************************************************************************/ 847 GLOBAL bit32 satRead_1( 848 tiRoot_t *tiRoot, 849 tiIORequest_t *tiIORequest, 850 tiDeviceHandle_t *tiDeviceHandle, 851 tiScsiInitiatorRequest_t *tiScsiRequest, 852 satIOContext_t *satIOContext); 853 GLOBAL bit32 satRead10_2( 854 tiRoot_t *tiRoot, 855 tiIORequest_t *tiIORequest, 856 tiDeviceHandle_t *tiDeviceHandle, 857 tiScsiInitiatorRequest_t *tiScsiRequest, 858 satIOContext_t *satIOContext); 859 860 /*****************************************************************************/ 861 /*! \brief SAT implementation for SCSI satWriteSame10. 862 * 863 * SAT implementation for SCSI satWriteSame10. 864 * 865 * \param tiRoot: Pointer to TISA initiator driver/port instance. 866 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 867 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 868 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 869 * \param satIOContext_t: Pointer to the SAT IO Context 870 * 871 * \return If command is started successfully 872 * - \e tiSuccess: I/O request successfully initiated. 873 * - \e tiBusy: No resources available, try again later. 874 * - \e tiIONoDevice: Invalid device handle. 875 * - \e tiError: Other errors. 876 */ 877 /*****************************************************************************/ 878 GLOBAL bit32 satWriteSame10( 879 tiRoot_t *tiRoot, 880 tiIORequest_t *tiIORequest, 881 tiDeviceHandle_t *tiDeviceHandle, 882 tiScsiInitiatorRequest_t *tiScsiRequest, 883 satIOContext_t *satIOContext); 884 885 GLOBAL bit32 satWriteSame10_1( 886 tiRoot_t *tiRoot, 887 tiIORequest_t *tiIORequest, 888 tiDeviceHandle_t *tiDeviceHandle, 889 tiScsiInitiatorRequest_t *tiScsiRequest, 890 satIOContext_t *satIOContext, 891 bit32 lba 892 ); 893 GLOBAL bit32 satWriteSame10_2( 894 tiRoot_t *tiRoot, 895 tiIORequest_t *tiIORequest, 896 tiDeviceHandle_t *tiDeviceHandle, 897 tiScsiInitiatorRequest_t *tiScsiRequest, 898 satIOContext_t *satIOContext, 899 bit32 lba 900 ); 901 GLOBAL bit32 satWriteSame10_3( 902 tiRoot_t *tiRoot, 903 tiIORequest_t *tiIORequest, 904 tiDeviceHandle_t *tiDeviceHandle, 905 tiScsiInitiatorRequest_t *tiScsiRequest, 906 satIOContext_t *satIOContext, 907 bit32 lba 908 ); 909 /*****************************************************************************/ 910 /*! \brief SAT implementation for SCSI satWriteSame16. 911 * 912 * SAT implementation for SCSI satWriteSame16. 913 * 914 * \param tiRoot: Pointer to TISA initiator driver/port instance. 915 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 916 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 917 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 918 * \param satIOContext_t: Pointer to the SAT IO Context 919 * 920 * \return If command is started successfully 921 * - \e tiSuccess: I/O request successfully initiated. 922 * - \e tiBusy: No resources available, try again later. 923 * - \e tiIONoDevice: Invalid device handle. 924 * - \e tiError: Other errors. 925 */ 926 /*****************************************************************************/ 927 GLOBAL bit32 satWriteSame16( 928 tiRoot_t *tiRoot, 929 tiIORequest_t *tiIORequest, 930 tiDeviceHandle_t *tiDeviceHandle, 931 tiScsiInitiatorRequest_t *tiScsiRequest, 932 satIOContext_t *satIOContext); 933 934 /*****************************************************************************/ 935 /*! \brief SAT implementation for SCSI satLogSenseAllocate. 936 * 937 * Part of SAT implementation for SCSI satLogSense. 938 * 939 * \param tiRoot: Pointer to TISA initiator driver/port instance. 940 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 941 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 942 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 943 * \param satIOContext_t: Pointer to the SAT IO Context 944 * \param payloadSize: size of payload to be allocated. 945 * \param flag: flag value 946 * 947 * \return If command is started successfully 948 * - \e tiSuccess: I/O request successfully initiated. 949 * - \e tiBusy: No resources available, try again later. 950 * - \e tiIONoDevice: Invalid device handle. 951 * - \e tiError: Other errors. 952 * \note 953 * - flag values: LOG_SENSE_0, LOG_SENSE_1, LOG_SENSE_2 954 */ 955 /*****************************************************************************/ 956 GLOBAL bit32 satLogSenseAllocate( 957 tiRoot_t *tiRoot, 958 tiIORequest_t *tiIORequest, 959 tiDeviceHandle_t *tiDeviceHandle, 960 tiScsiInitiatorRequest_t *tiScsiRequest, 961 satIOContext_t *satIOContext, 962 bit32 payloadSize, 963 bit32 flag 964 ); 965 966 /*****************************************************************************/ 967 /*! \brief SAT implementation for SCSI satSMARTEnable. 968 * 969 * Part of SAT implementation for SCSI satLogSense. 970 * 971 * \param tiRoot: Pointer to TISA initiator driver/port instance. 972 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 973 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 974 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 975 * \param satIOContext_t: Pointer to the SAT IO Context 976 * 977 * \return If command is started successfully 978 * - \e tiSuccess: I/O request successfully initiated. 979 * - \e tiBusy: No resources available, try again later. 980 * - \e tiIONoDevice: Invalid device handle. 981 * - \e tiError: Other errors. 982 */ 983 /*****************************************************************************/ 984 GLOBAL bit32 satSMARTEnable( 985 tiRoot_t *tiRoot, 986 tiIORequest_t *tiIORequest, 987 tiDeviceHandle_t *tiDeviceHandle, 988 tiScsiInitiatorRequest_t *tiScsiRequest, 989 satIOContext_t *satIOContext); 990 991 /*****************************************************************************/ 992 /*! \brief SAT implementation for SCSI satLogSense_1. 993 * 994 * Part of SAT implementation for SCSI satLogSense. 995 * 996 * \param tiRoot: Pointer to TISA initiator driver/port instance. 997 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 998 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 999 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1000 * \param satIOContext_t: Pointer to the SAT IO Context 1001 * 1002 * \return If command is started successfully 1003 * - \e tiSuccess: I/O request successfully initiated. 1004 * - \e tiBusy: No resources available, try again later. 1005 * - \e tiIONoDevice: Invalid device handle. 1006 * - \e tiError: Other errors. 1007 */ 1008 /*****************************************************************************/ 1009 GLOBAL bit32 satLogSense_1( 1010 tiRoot_t *tiRoot, 1011 tiIORequest_t *tiIORequest, 1012 tiDeviceHandle_t *tiDeviceHandle, 1013 tiScsiInitiatorRequest_t *tiScsiRequest, 1014 satIOContext_t *satIOContext); 1015 1016 /*****************************************************************************/ 1017 /*! \brief SAT implementation for SCSI satLogSense_2. 1018 * 1019 * Part of SAT implementation for SCSI satLogSense. 1020 * 1021 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1022 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1023 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1024 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1025 * \param satIOContext_t: Pointer to the SAT IO Context 1026 * 1027 * \return If command is started successfully 1028 * - \e tiSuccess: I/O request successfully initiated. 1029 * - \e tiBusy: No resources available, try again later. 1030 * - \e tiIONoDevice: Invalid device handle. 1031 * - \e tiError: Other errors. 1032 */ 1033 /*****************************************************************************/ 1034 GLOBAL bit32 satLogSense_2( 1035 tiRoot_t *tiRoot, 1036 tiIORequest_t *tiIORequest, 1037 tiDeviceHandle_t *tiDeviceHandle, 1038 tiScsiInitiatorRequest_t *tiScsiRequest, 1039 satIOContext_t *satIOContext); 1040 1041 /*****************************************************************************/ 1042 /*! \brief SAT implementation for SCSI satLogSense_3. 1043 * 1044 * Part of SAT implementation for SCSI satLogSense. 1045 * 1046 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1047 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1048 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1049 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1050 * \param satIOContext_t: Pointer to the SAT IO Context 1051 * 1052 * \return If command is started successfully 1053 * - \e tiSuccess: I/O request successfully initiated. 1054 * - \e tiBusy: No resources available, try again later. 1055 * - \e tiIONoDevice: Invalid device handle. 1056 * - \e tiError: Other errors. 1057 */ 1058 /*****************************************************************************/ 1059 GLOBAL bit32 satLogSense_3( 1060 tiRoot_t *tiRoot, 1061 tiIORequest_t *tiIORequest, 1062 tiDeviceHandle_t *tiDeviceHandle, 1063 tiScsiInitiatorRequest_t *tiScsiRequest, 1064 satIOContext_t *satIOContext); 1065 1066 1067 /*****************************************************************************/ 1068 /*! \brief SAT implementation for SCSI satLogSense. 1069 * 1070 * SAT implementation for SCSI satLogSense. 1071 * 1072 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1073 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1074 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1075 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1076 * \param satIOContext_t: Pointer to the SAT IO Context 1077 * 1078 * \return If command is started successfully 1079 * - \e tiSuccess: I/O request successfully initiated. 1080 * - \e tiBusy: No resources available, try again later. 1081 * - \e tiIONoDevice: Invalid device handle. 1082 * - \e tiError: Other errors. 1083 */ 1084 /*****************************************************************************/ 1085 GLOBAL bit32 satLogSense( 1086 tiRoot_t *tiRoot, 1087 tiIORequest_t *tiIORequest, 1088 tiDeviceHandle_t *tiDeviceHandle, 1089 tiScsiInitiatorRequest_t *tiScsiRequest, 1090 satIOContext_t *satIOContext); 1091 1092 /*****************************************************************************/ 1093 /*! \brief SAT implementation for SCSI satModeSelect6. 1094 * 1095 * SAT implementation for SCSI satModeSelect6. 1096 * 1097 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1098 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1099 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1100 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1101 * \param satIOContext_t: Pointer to the SAT IO Context 1102 * 1103 * \return If command is started successfully 1104 * - \e tiSuccess: I/O request successfully initiated. 1105 * - \e tiBusy: No resources available, try again later. 1106 * - \e tiIONoDevice: Invalid device handle. 1107 * - \e tiError: Other errors. 1108 */ 1109 /*****************************************************************************/ 1110 GLOBAL bit32 satModeSelect6( 1111 tiRoot_t *tiRoot, 1112 tiIORequest_t *tiIORequest, 1113 tiDeviceHandle_t *tiDeviceHandle, 1114 tiScsiInitiatorRequest_t *tiScsiRequest, 1115 satIOContext_t *satIOContext); 1116 GLOBAL bit32 satModeSelect6n10_1( 1117 tiRoot_t *tiRoot, 1118 tiIORequest_t *tiIORequest, 1119 tiDeviceHandle_t *tiDeviceHandle, 1120 tiScsiInitiatorRequest_t *tiScsiRequest, 1121 satIOContext_t *satIOContext); 1122 1123 /*****************************************************************************/ 1124 /*! \brief SAT implementation for SCSI satModeSelect10. 1125 * 1126 * SAT implementation for SCSI satModeSelect10. 1127 * 1128 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1129 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1130 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1131 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1132 * \param satIOContext_t: Pointer to the SAT IO Context 1133 * 1134 * \return If command is started successfully 1135 * - \e tiSuccess: I/O request successfully initiated. 1136 * - \e tiBusy: No resources available, try again later. 1137 * - \e tiIONoDevice: Invalid device handle. 1138 * - \e tiError: Other errors. 1139 */ 1140 /*****************************************************************************/ 1141 GLOBAL bit32 satModeSelect10( 1142 tiRoot_t *tiRoot, 1143 tiIORequest_t *tiIORequest, 1144 tiDeviceHandle_t *tiDeviceHandle, 1145 tiScsiInitiatorRequest_t *tiScsiRequest, 1146 satIOContext_t *satIOContext); 1147 1148 /*****************************************************************************/ 1149 /*! \brief SAT implementation for SCSI satSynchronizeCache10. 1150 * 1151 * SAT implementation for SCSI satSynchronizeCache10. 1152 * 1153 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1154 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1155 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1156 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1157 * \param satIOContext_t: Pointer to the SAT IO Context 1158 * 1159 * \return If command is started successfully 1160 * - \e tiSuccess: I/O request successfully initiated. 1161 * - \e tiBusy: No resources available, try again later. 1162 * - \e tiIONoDevice: Invalid device handle. 1163 * - \e tiError: Other errors. 1164 */ 1165 /*****************************************************************************/ 1166 GLOBAL bit32 satSynchronizeCache10( 1167 tiRoot_t *tiRoot, 1168 tiIORequest_t *tiIORequest, 1169 tiDeviceHandle_t *tiDeviceHandle, 1170 tiScsiInitiatorRequest_t *tiScsiRequest, 1171 satIOContext_t *satIOContext); 1172 1173 /*****************************************************************************/ 1174 /*! \brief SAT implementation for SCSI satSynchronizeCache16. 1175 * 1176 * SAT implementation for SCSI satSynchronizeCache16. 1177 * 1178 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1179 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1180 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1181 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1182 * \param satIOContext_t: Pointer to the SAT IO Context 1183 * 1184 * \return If command is started successfully 1185 * - \e tiSuccess: I/O request successfully initiated. 1186 * - \e tiBusy: No resources available, try again later. 1187 * - \e tiIONoDevice: Invalid device handle. 1188 * - \e tiError: Other errors. 1189 */ 1190 /*****************************************************************************/ 1191 GLOBAL bit32 satSynchronizeCache16( 1192 tiRoot_t *tiRoot, 1193 tiIORequest_t *tiIORequest, 1194 tiDeviceHandle_t *tiDeviceHandle, 1195 tiScsiInitiatorRequest_t *tiScsiRequest, 1196 satIOContext_t *satIOContext); 1197 1198 /*****************************************************************************/ 1199 /*! \brief SAT implementation for SCSI satWriteAndVerify10. 1200 * 1201 * SAT implementation for SCSI satWriteAndVerify10. 1202 * 1203 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1204 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1205 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1206 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1207 * \param satIOContext_t: Pointer to the SAT IO Context 1208 * 1209 * \return If command is started successfully 1210 * - \e tiSuccess: I/O request successfully initiated. 1211 * - \e tiBusy: No resources available, try again later. 1212 * - \e tiIONoDevice: Invalid device handle. 1213 * - \e tiError: Other errors. 1214 */ 1215 /*****************************************************************************/ 1216 GLOBAL bit32 satWriteAndVerify10( 1217 tiRoot_t *tiRoot, 1218 tiIORequest_t *tiIORequest, 1219 tiDeviceHandle_t *tiDeviceHandle, 1220 tiScsiInitiatorRequest_t *tiScsiRequest, 1221 satIOContext_t *satIOContext); 1222 1223 #ifdef REMOVED 1224 /*****************************************************************************/ 1225 /*! \brief SAT implementation for SCSI satWriteAndVerify10_1. 1226 * 1227 * SAT implementation for SCSI satWriteAndVerify10_1. 1228 * Sub function of satWriteAndVerify10 1229 * 1230 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1231 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1232 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1233 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1234 * \param satIOContext_t: Pointer to the SAT IO Context 1235 * 1236 * \return If command is started successfully 1237 * - \e tiSuccess: I/O request successfully initiated. 1238 * - \e tiBusy: No resources available, try again later. 1239 * - \e tiIONoDevice: Invalid device handle. 1240 * - \e tiError: Other errors. 1241 */ 1242 /*****************************************************************************/ 1243 GLOBAL bit32 satWriteAndVerify10_1( 1244 tiRoot_t *tiRoot, 1245 tiIORequest_t *tiIORequest, 1246 tiDeviceHandle_t *tiDeviceHandle, 1247 tiScsiInitiatorRequest_t *tiScsiRequest, 1248 satIOContext_t *satIOContext); 1249 #endif 1250 1251 /*****************************************************************************/ 1252 /*! \brief SAT implementation for SCSI satWriteAndVerify12. 1253 * 1254 * SAT implementation for SCSI satWriteAndVerify12. 1255 * 1256 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1257 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1258 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1259 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1260 * \param satIOContext_t: Pointer to the SAT IO Context 1261 * 1262 * \return If command is started successfully 1263 * - \e tiSuccess: I/O request successfully initiated. 1264 * - \e tiBusy: No resources available, try again later. 1265 * - \e tiIONoDevice: Invalid device handle. 1266 * - \e tiError: Other errors. 1267 */ 1268 /*****************************************************************************/ 1269 GLOBAL bit32 satWriteAndVerify12( 1270 tiRoot_t *tiRoot, 1271 tiIORequest_t *tiIORequest, 1272 tiDeviceHandle_t *tiDeviceHandle, 1273 tiScsiInitiatorRequest_t *tiScsiRequest, 1274 satIOContext_t *satIOContext); 1275 1276 GLOBAL bit32 satNonChainedWriteNVerify_Verify( 1277 tiRoot_t *tiRoot, 1278 tiIORequest_t *tiIORequest, 1279 tiDeviceHandle_t *tiDeviceHandle, 1280 tiScsiInitiatorRequest_t *tiScsiRequest, 1281 satIOContext_t *satIOContext); 1282 1283 GLOBAL bit32 satChainedWriteNVerify_Write( 1284 tiRoot_t *tiRoot, 1285 tiIORequest_t *tiIORequest, 1286 tiDeviceHandle_t *tiDeviceHandle, 1287 tiScsiInitiatorRequest_t *tiScsiRequest, 1288 satIOContext_t *satIOContext); 1289 1290 GLOBAL bit32 satChainedWriteNVerify_Verify( 1291 tiRoot_t *tiRoot, 1292 tiIORequest_t *tiIORequest, 1293 tiDeviceHandle_t *tiDeviceHandle, 1294 tiScsiInitiatorRequest_t *tiScsiRequest, 1295 satIOContext_t *satIOContext); 1296 1297 GLOBAL bit32 satChainedWriteNVerify_Start_Verify( 1298 tiRoot_t *tiRoot, 1299 tiIORequest_t *tiIORequest, 1300 tiDeviceHandle_t *tiDeviceHandle, 1301 tiScsiInitiatorRequest_t *tiScsiRequest, 1302 satIOContext_t *satIOContext); 1303 1304 1305 /*****************************************************************************/ 1306 /*! \brief SAT implementation for SCSI satWriteAndVerify16. 1307 * 1308 * SAT implementation for SCSI satWriteAndVerify16. 1309 * 1310 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1311 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1312 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1313 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1314 * \param satIOContext_t: Pointer to the SAT IO Context 1315 * 1316 * \return If command is started successfully 1317 * - \e tiSuccess: I/O request successfully initiated. 1318 * - \e tiBusy: No resources available, try again later. 1319 * - \e tiIONoDevice: Invalid device handle. 1320 * - \e tiError: Other errors. 1321 */ 1322 /*****************************************************************************/ 1323 GLOBAL bit32 satWriteAndVerify16( 1324 tiRoot_t *tiRoot, 1325 tiIORequest_t *tiIORequest, 1326 tiDeviceHandle_t *tiDeviceHandle, 1327 tiScsiInitiatorRequest_t *tiScsiRequest, 1328 satIOContext_t *satIOContext); 1329 1330 GLOBAL bit32 satChainedVerify16( 1331 tiRoot_t *tiRoot, 1332 tiIORequest_t *tiIORequest, 1333 tiDeviceHandle_t *tiDeviceHandle, 1334 tiScsiInitiatorRequest_t *tiScsiRequest, 1335 satIOContext_t *satIOContext); 1336 1337 /*****************************************************************************/ 1338 /*! \brief SAT implementation for SCSI TEST UNIT READY. 1339 * 1340 * SAT implementation for SCSI TUR and send FIS request to LL layer. 1341 * 1342 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1343 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1344 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1345 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1346 * \param satIOContext_t: Pointer to the SAT IO Context 1347 * 1348 * \return If command is started successfully 1349 * - \e tiSuccess: I/O request successfully initiated. 1350 * - \e tiBusy: No resources available, try again later. 1351 * - \e tiIONoDevice: Invalid device handle. 1352 * - \e tiError: Other errors. 1353 */ 1354 /*****************************************************************************/ 1355 GLOBAL bit32 satTestUnitReady( 1356 tiRoot_t *tiRoot, 1357 tiIORequest_t *tiIORequest, 1358 tiDeviceHandle_t *tiDeviceHandle, 1359 tiScsiInitiatorRequest_t *tiScsiRequest, 1360 satIOContext_t *satIOContext); 1361 1362 /*****************************************************************************/ 1363 /*! \brief SAT implementation for SCSI MODE SENSE (6). 1364 * 1365 * SAT implementation for SCSI MODE SENSE (6). 1366 * 1367 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1368 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1369 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1370 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1371 * \param satIOContext_t: Pointer to the SAT IO Context 1372 * 1373 * \return If command is started successfully 1374 * - \e tiSuccess: I/O request successfully initiated. 1375 * - \e tiBusy: No resources available, try again later. 1376 * - \e tiIONoDevice: Invalid device handle. 1377 * - \e tiError: Other errors. 1378 */ 1379 /*****************************************************************************/ 1380 GLOBAL bit32 satModeSense6( 1381 tiRoot_t *tiRoot, 1382 tiIORequest_t *tiIORequest, 1383 tiDeviceHandle_t *tiDeviceHandle, 1384 tiScsiInitiatorRequest_t *tiScsiRequest, 1385 satIOContext_t *satIOContext); 1386 1387 1388 /*****************************************************************************/ 1389 /*! \brief SAT implementation for SCSI MODE SENSE (10). 1390 * 1391 * SAT implementation for SCSI MODE SENSE (10). 1392 * 1393 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1394 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1395 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1396 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1397 * \param satIOContext_t: Pointer to the SAT IO Context 1398 * 1399 * \return If command is started successfully 1400 * - \e tiSuccess: I/O request successfully initiated. 1401 * - \e tiBusy: No resources available, try again later. 1402 * - \e tiIONoDevice: Invalid device handle. 1403 * - \e tiError: Other errors. 1404 */ 1405 /*****************************************************************************/ 1406 GLOBAL bit32 satModeSense10( 1407 tiRoot_t *tiRoot, 1408 tiIORequest_t *tiIORequest, 1409 tiDeviceHandle_t *tiDeviceHandle, 1410 tiScsiInitiatorRequest_t *tiScsiRequest, 1411 satIOContext_t *satIOContext); 1412 1413 1414 /*****************************************************************************/ 1415 /*! \brief SAT implementation for SCSI VERIFY (10). 1416 * 1417 * SAT implementation for SCSI VERIFY (10). 1418 * 1419 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1420 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1421 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1422 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1423 * \param satIOContext_t: Pointer to the SAT IO Context 1424 * 1425 * \return If command is started successfully 1426 * - \e tiSuccess: I/O request successfully initiated. 1427 * - \e tiBusy: No resources available, try again later. 1428 * - \e tiIONoDevice: Invalid device handle. 1429 * - \e tiError: Other errors. 1430 */ 1431 /*****************************************************************************/ 1432 GLOBAL bit32 satVerify10( 1433 tiRoot_t *tiRoot, 1434 tiIORequest_t *tiIORequest, 1435 tiDeviceHandle_t *tiDeviceHandle, 1436 tiScsiInitiatorRequest_t *tiScsiRequest, 1437 satIOContext_t *satIOContext); 1438 1439 GLOBAL bit32 satChainedVerify( 1440 tiRoot_t *tiRoot, 1441 tiIORequest_t *tiIORequest, 1442 tiDeviceHandle_t *tiDeviceHandle, 1443 tiScsiInitiatorRequest_t *tiScsiRequest, 1444 satIOContext_t *satIOContext); 1445 1446 /*****************************************************************************/ 1447 /*! \brief SAT implementation for SCSI VERIFY (12). 1448 * 1449 * SAT implementation for SCSI VERIFY (12). 1450 * 1451 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1452 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1453 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1454 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1455 * \param satIOContext_t: Pointer to the SAT IO Context 1456 * 1457 * \return If command is started successfully 1458 * - \e tiSuccess: I/O request successfully initiated. 1459 * - \e tiBusy: No resources available, try again later. 1460 * - \e tiIONoDevice: Invalid device handle. 1461 * - \e tiError: Other errors. 1462 */ 1463 /*****************************************************************************/ 1464 GLOBAL bit32 satVerify12( 1465 tiRoot_t *tiRoot, 1466 tiIORequest_t *tiIORequest, 1467 tiDeviceHandle_t *tiDeviceHandle, 1468 tiScsiInitiatorRequest_t *tiScsiRequest, 1469 satIOContext_t *satIOContext); 1470 /*****************************************************************************/ 1471 /*! \brief SAT implementation for SCSI VERIFY (16). 1472 * 1473 * SAT implementation for SCSI VERIFY (16). 1474 * 1475 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1476 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1477 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1478 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1479 * \param satIOContext_t: Pointer to the SAT IO Context 1480 * 1481 * \return If command is started successfully 1482 * - \e tiSuccess: I/O request successfully initiated. 1483 * - \e tiBusy: No resources available, try again later. 1484 * - \e tiIONoDevice: Invalid device handle. 1485 * - \e tiError: Other errors. 1486 */ 1487 /*****************************************************************************/ 1488 GLOBAL bit32 satVerify16( 1489 tiRoot_t *tiRoot, 1490 tiIORequest_t *tiIORequest, 1491 tiDeviceHandle_t *tiDeviceHandle, 1492 tiScsiInitiatorRequest_t *tiScsiRequest, 1493 satIOContext_t *satIOContext); 1494 /*****************************************************************************/ 1495 /*! \brief SAT implementation for SCSI satTestUnitReady_1. 1496 * 1497 * SAT implementation for SCSI satTestUnitReady_1 1498 * Sub function of satTestUnitReady 1499 * 1500 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1501 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1502 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1503 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1504 * \param satIOContext_t: Pointer to the SAT IO Context 1505 * 1506 * \return If command is started successfully 1507 * - \e tiSuccess: I/O request successfully initiated. 1508 * - \e tiBusy: No resources available, try again later. 1509 * - \e tiIONoDevice: Invalid device handle. 1510 * - \e tiError: Other errors. 1511 */ 1512 /*****************************************************************************/ 1513 GLOBAL bit32 satTestUnitReady_1( 1514 tiRoot_t *tiRoot, 1515 tiIORequest_t *tiIORequest, 1516 tiDeviceHandle_t *tiDeviceHandle, 1517 tiScsiInitiatorRequest_t *tiScsiRequest, 1518 satIOContext_t *satIOContext); 1519 1520 /*****************************************************************************/ 1521 /*! \brief SAT implementation for SCSI STANDARD INQUIRY. 1522 * 1523 * SAT implementation for SCSI STANDARD INQUIRY. 1524 * 1525 * \param pInquiry: Pointer to Inquiry Data buffer. 1526 * \param pSATAIdData: Pointer to ATA IDENTIFY DEVICE data. 1527 * 1528 * \return None. 1529 */ 1530 /*****************************************************************************/ 1531 GLOBAL void satInquiryStandard( 1532 bit8 *pInquiry, 1533 agsaSATAIdentifyData_t *pSATAIdData, 1534 tiIniScsiCmnd_t *scsiCmnd 1535 ); 1536 1537 1538 /*****************************************************************************/ 1539 /*! \brief SAT implementation for SCSI INQUIRY page 0. 1540 * 1541 * SAT implementation for SCSI INQUIRY page 0. 1542 * 1543 * \param pInquiry: Pointer to Inquiry Data buffer. 1544 * \param pSATAIdData: Pointer to ATA IDENTIFY DEVICE data. 1545 * 1546 * \return None. 1547 */ 1548 /*****************************************************************************/ 1549 GLOBAL void satInquiryPage0( 1550 bit8 *pInquiry, 1551 agsaSATAIdentifyData_t *pSATAIdData); 1552 1553 1554 /*****************************************************************************/ 1555 /*! \brief SAT implementation for SCSI INQUIRY page 83. 1556 * 1557 * SAT implementation for SCSI INQUIRY page 83. 1558 * 1559 * \param pInquiry: Pointer to Inquiry Data buffer. 1560 * \param pSATAIdData: Pointer to ATA IDENTIFY DEVICE data. 1561 * \param pSatDevData Pointer to internal device data structure 1562 * 1563 * \return None. 1564 */ 1565 /*****************************************************************************/ 1566 GLOBAL void satInquiryPage83( 1567 bit8 *pInquiry, 1568 agsaSATAIdentifyData_t *pSATAIdData, 1569 satDeviceData_t *pSatDevData); 1570 1571 /*****************************************************************************/ 1572 /*! \brief SAT implementation for SCSI INQUIRY page 89. 1573 * 1574 * SAT implementation for SCSI INQUIRY page 89. 1575 * 1576 * \param pInquiry: Pointer to Inquiry Data buffer. 1577 * \param pSATAIdData: Pointer to ATA IDENTIFY DEVICE data. 1578 * \param pSatDevData Pointer to internal device data structure 1579 * 1580 * \return None. 1581 */ 1582 /*****************************************************************************/ 1583 GLOBAL void satInquiryPage89( 1584 bit8 *pInquiry, 1585 agsaSATAIdentifyData_t *pSATAIdData, 1586 satDeviceData_t *pSatDevData); 1587 1588 /*****************************************************************************/ 1589 /*! \brief SAT implementation for SCSI INQUIRY page 80. 1590 * 1591 * SAT implementation for SCSI INQUIRY page 80. 1592 * 1593 * \param pInquiry: Pointer to Inquiry Data buffer. 1594 * \param pSATAIdData: Pointer to ATA IDENTIFY DEVICE data. 1595 * 1596 * \return None. 1597 */ 1598 /*****************************************************************************/ 1599 GLOBAL void satInquiryPage80( 1600 bit8 *pInquiry, 1601 agsaSATAIdentifyData_t *pSATAIdData); 1602 1603 1604 /***************************************************************************** 1605 *! \brief sataLLIOStart 1606 * 1607 * This routine is called to initiate a new SATA request to LL layer. 1608 * This function implements/encapsulates HW and LL API dependency. 1609 * 1610 * \param tiRoot: Pointer to TISA initiator driver/port instance. 1611 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 1612 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 1613 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 1614 * \param satIOContext_t: Pointer to the SAT IO Context 1615 * 1616 * \return: 1617 * 1618 * tiSuccess: I/O request successfully initiated. 1619 * tiBusy: No resources available, try again later. 1620 * tiIONoDevice: Invalid device handle. 1621 * tiError: Other errors that prevent the I/O request to be started. 1622 * 1623 * 1624 *****************************************************************************/ 1625 1626 GLOBAL bit32 sataLLIOStart ( 1627 tiRoot_t *tiRoot, 1628 tiIORequest_t *tiIORequest, 1629 tiDeviceHandle_t *tiDeviceHandle, 1630 tiScsiInitiatorRequest_t *tiScsiRequest, 1631 satIOContext_t *satIOContext 1632 ); 1633 1634 /***************************************************************************** 1635 *! \brief itdsataIOPrepareSGL 1636 * 1637 * This function is called to prepare and translate the TISA SGL information 1638 * to the SAS/SATA LL layer specific SGL. 1639 * 1640 * \param tiRoot: Pointer to initiator driver/port instance. 1641 * \param IORequestBody: TD layer request body for the I/O. 1642 * \param tiSgl1: First TISA SGL info. 1643 * \param sglVirtualAddr: The virtual address of the first element in 1644 * tiSgl1 when tiSgl1 is used with the type tiSglList. 1645 * 1646 * \return: 1647 * 1648 * tiSuccess: SGL initialized successfully. 1649 * tiError: Failed to initialize SGL. 1650 * 1651 * 1652 *****************************************************************************/ 1653 osGLOBAL bit32 itdsataIOPrepareSGL( 1654 tiRoot_t *tiRoot, 1655 tdIORequestBody_t *tdIORequestBody, 1656 tiSgl_t *tiSgl1, 1657 void *sglVirtualAddr 1658 ); 1659 1660 /***************************************************************************** 1661 *! \brief satNonChainedDataIOCB 1662 * 1663 * This routine is a callback function called from ossaSATACompleted(). 1664 * This CB routine deals with normal non-chained data I/O SATA request. 1665 * 1666 * \param agRoot: Handles for this instance of SAS/SATA hardware 1667 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 1668 * \param agIOStatus: Status of completed I/O. 1669 * \param agSATAParm1: Additional info based on status. 1670 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 1671 * length. 1672 * \param ioContext: Pointer to satIOContext_t. 1673 * 1674 * \return: none 1675 * 1676 *****************************************************************************/ 1677 1678 void satNonChainedDataIOCB( 1679 agsaRoot_t *agRoot, 1680 agsaIORequest_t *agIORequest, 1681 bit32 agIOStatus, 1682 agsaFisHeader_t *agFirstDword, 1683 bit32 agIOInfoLen, 1684 agsaFrameHandle_t agFrameHandle, 1685 void *ioContext 1686 ); 1687 void satChainedDataIOCB( 1688 agsaRoot_t *agRoot, 1689 agsaIORequest_t *agIORequest, 1690 bit32 agIOStatus, 1691 agsaFisHeader_t *agFirstDword, 1692 bit32 agIOInfoLen, 1693 agsaFrameHandle_t agFrameHandle, 1694 void *ioContext 1695 ); 1696 1697 void satNonChainedWriteNVerifyCB( 1698 agsaRoot_t *agRoot, 1699 agsaIORequest_t *agIORequest, 1700 bit32 agIOStatus, 1701 agsaFisHeader_t *agFirstDword, 1702 bit32 agIOInfoLen, 1703 agsaFrameHandle_t agFrameHandle, 1704 void *ioContext 1705 ); 1706 1707 void satChainedWriteNVerifyCB( 1708 agsaRoot_t *agRoot, 1709 agsaIORequest_t *agIORequest, 1710 bit32 agIOStatus, 1711 agsaFisHeader_t *agFirstDword, 1712 bit32 agIOInfoLen, 1713 agsaFrameHandle_t agFrameHandle, 1714 void *ioContext 1715 ); 1716 1717 /***************************************************************************** 1718 *! \brief satNonDataIOCB 1719 * 1720 * This routine is a callback function called from ossaSATACompleted(). 1721 * This CB routine deals with non-data I/O SATA request. 1722 * 1723 * \param agRoot: Handles for this instance of SAS/SATA hardware 1724 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 1725 * \param agIOStatus: Status of completed I/O. 1726 * \param agSATAParm1: Additional info based on status. 1727 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 1728 * length. 1729 * \param ioContext: Pointer to satIOContext_t. 1730 * 1731 * \return: none 1732 * 1733 *****************************************************************************/ 1734 void satNonDataIOCB( 1735 agsaRoot_t *agRoot, 1736 agsaIORequest_t *agIORequest, 1737 bit32 agIOStatus, 1738 agsaFisHeader_t *agFirstDword, 1739 bit32 agIOInfoLen, 1740 agsaFrameHandle_t agFrameHandle, 1741 void *ioContext 1742 ); 1743 1744 /***************************************************************************** 1745 *! \brief satSMARTEnableCB 1746 * 1747 * This routine is a callback function for satSMARTEnable() 1748 * 1749 * \param agRoot: Handles for this instance of SAS/SATA hardware 1750 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 1751 * \param agIOStatus: Status of completed I/O. 1752 * \param agSATAParm1: Additional info based on status. 1753 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 1754 * length. 1755 * \param ioContext: Pointer to satIOContext_t. 1756 * 1757 * \return: none 1758 * 1759 *****************************************************************************/ 1760 void satSMARTEnableCB( 1761 agsaRoot_t *agRoot, 1762 agsaIORequest_t *agIORequest, 1763 bit32 agIOStatus, 1764 agsaFisHeader_t *agFirstDword, 1765 bit32 agIOInfoLen, 1766 agsaFrameHandle_t agFrameHandle, 1767 void *ioContext 1768 ) ; 1769 1770 /***************************************************************************** 1771 *! \brief satLogSenseCB 1772 * 1773 * This routine is a callback function for satLogSense() 1774 * 1775 * \param agRoot: Handles for this instance of SAS/SATA hardware 1776 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 1777 * \param agIOStatus: Status of completed I/O. 1778 * \param agSATAParm1: Additional info based on status. 1779 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 1780 * length. 1781 * \param ioContext: Pointer to satIOContext_t. 1782 * 1783 * \return: none 1784 * 1785 *****************************************************************************/ 1786 void satLogSenseCB( 1787 agsaRoot_t *agRoot, 1788 agsaIORequest_t *agIORequest, 1789 bit32 agIOStatus, 1790 agsaFisHeader_t *agFirstDword, 1791 bit32 agIOInfoLen, 1792 agsaFrameHandle_t agFrameHandle, 1793 void *ioCotext 1794 ); 1795 void satModeSelect6n10CB( 1796 agsaRoot_t *agRoot, 1797 agsaIORequest_t *agIORequest, 1798 bit32 agIOStatus, 1799 agsaFisHeader_t *agFirstDword, 1800 bit32 agIOInfoLen, 1801 agsaFrameHandle_t agFrameHandle, 1802 void *ioContext 1803 ); 1804 void satSynchronizeCache10n16CB( 1805 agsaRoot_t *agRoot, 1806 agsaIORequest_t *agIORequest, 1807 bit32 agIOStatus, 1808 agsaFisHeader_t *agFirstDword, 1809 bit32 agIOInfoLen, 1810 agsaFrameHandle_t agFrameHandle, 1811 void *ioContext 1812 ); 1813 #ifdef REMOVED 1814 void satWriteAndVerify10CB( 1815 agsaRoot_t *agRoot, 1816 agsaIORequest_t *agIORequest, 1817 bit32 agIOStatus, 1818 agsaFisHeader_t *agFirstDword, 1819 bit32 agIOInfoLen, 1820 agsaFrameHandle_t agFrameHandle, 1821 void *ioContext 1822 ); 1823 #endif 1824 1825 /***************************************************************************** 1826 *! \brief satReadLogExtCB 1827 * 1828 * This routine is a callback function called from ossaSATACompleted(). 1829 * This CB routine deals READ LOG EXT completion. 1830 * 1831 * \param agRoot: Handles for this instance of SAS/SATA hardware 1832 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 1833 * \param agIOStatus: Status of completed I/O. 1834 * \param agSATAParm1: Additional info based on status. 1835 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 1836 * length. 1837 * \param ioContext: Pointer to satIOContext_t. 1838 * 1839 * \return: none 1840 * 1841 *****************************************************************************/ 1842 void satReadLogExtCB( 1843 agsaRoot_t *agRoot, 1844 agsaIORequest_t *agIORequest, 1845 bit32 agIOStatus, 1846 agsaFisHeader_t *agFirstDword, 1847 bit32 agIOInfoLen, 1848 agsaFrameHandle_t agFrameHandle, 1849 void *ioContext 1850 ); 1851 void satTestUnitReadyCB( 1852 agsaRoot_t *agRoot, 1853 agsaIORequest_t *agIORequest, 1854 bit32 agIOStatus, 1855 agsaFisHeader_t *agFirstDword, 1856 bit32 agIOInfoLen, 1857 agsaFrameHandle_t agFrameHandle, 1858 void *ioContext 1859 ); 1860 void satWriteSame10CB( 1861 agsaRoot_t *agRoot, 1862 agsaIORequest_t *agIORequest, 1863 bit32 agIOStatus, 1864 agsaFisHeader_t *agFirstDword, 1865 bit32 agIOInfoLen, 1866 agsaFrameHandle_t agFrameHandle, 1867 void *ioContext 1868 ); 1869 /***************************************************************************** 1870 *! \brief satSendDiagnosticCB 1871 * 1872 * This routine is a callback function called from ossaSATACompleted(). 1873 * This CB routine deals with Send Diagnostic completion. 1874 * 1875 * \param agRoot: Handles for this instance of SAS/SATA hardware 1876 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 1877 * \param agIOStatus: Status of completed I/O. 1878 * \param agSATAParm1: Additional info based on status. 1879 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 1880 * length. 1881 * \param ioContext: Pointer to satIOContext_t. 1882 * 1883 * \return: none 1884 * 1885 *****************************************************************************/ 1886 void satSendDiagnosticCB( 1887 agsaRoot_t *agRoot, 1888 agsaIORequest_t *agIORequest, 1889 bit32 agIOStatus, 1890 agsaFisHeader_t *agFirstDword, 1891 bit32 agIOInfoLen, 1892 agsaFrameHandle_t agFrameHandle, 1893 void *ioContext 1894 ); 1895 /***************************************************************************** 1896 *! \brief satRequestSenseCB 1897 * 1898 * This routine is a callback function called from ossaSATACompleted(). 1899 * This CB routine deals with Request Sense completion. 1900 * 1901 * \param agRoot: Handles for this instance of SAS/SATA hardware 1902 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 1903 * \param agIOStatus: Status of completed I/O. 1904 * \param agSATAParm1: Additional info based on status. 1905 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 1906 * length. 1907 * \param ioContext: Pointer to satIOContext_t. 1908 * 1909 * \return: none 1910 * 1911 *****************************************************************************/ 1912 void satRequestSenseCB( 1913 agsaRoot_t *agRoot, 1914 agsaIORequest_t *agIORequest, 1915 bit32 agIOStatus, 1916 agsaFisHeader_t *agFirstDword, 1917 bit32 agIOInfoLen, 1918 agsaFrameHandle_t agFrameHandle, 1919 void *ioContext 1920 ); 1921 /***************************************************************************** 1922 *! \brief satStartStopUnitCB 1923 * 1924 * This routine is a callback function called from ossaSATACompleted(). 1925 * This CB routine deals with Send Diagnostic completion. 1926 * 1927 * \param agRoot: Handles for this instance of SAS/SATA hardware 1928 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 1929 * \param agIOStatus: Status of completed I/O. 1930 * \param agSATAParm1: Additional info based on status. 1931 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 1932 * length. 1933 * \param ioContext: Pointer to satIOContext_t. 1934 * 1935 * \return: none 1936 * 1937 *****************************************************************************/ 1938 void satStartStopUnitCB( 1939 agsaRoot_t *agRoot, 1940 agsaIORequest_t *agIORequest, 1941 bit32 agIOStatus, 1942 agsaFisHeader_t *agFirstDword, 1943 bit32 agIOInfoLen, 1944 agsaFrameHandle_t agFrameHandle, 1945 void *ioContext 1946 ); 1947 /***************************************************************************** 1948 *! \brief satVerify10CB 1949 * 1950 * This routine is a callback function called from ossaSATACompleted(). 1951 * This CB routine deals with Verify(10) completion. 1952 * 1953 * \param agRoot: Handles for this instance of SAS/SATA hardware 1954 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 1955 * \param agIOStatus: Status of completed I/O. 1956 * \param agSATAParm1: Additional info based on status. 1957 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 1958 * length. 1959 * \param ioContext: Pointer to satIOContext_t. 1960 * 1961 * \return: none 1962 * 1963 *****************************************************************************/ 1964 void satVerify10CB( 1965 agsaRoot_t *agRoot, 1966 agsaIORequest_t *agIORequest, 1967 bit32 agIOStatus, 1968 agsaFisHeader_t *agFirstDword, 1969 bit32 agIOInfoLen, 1970 agsaFrameHandle_t agFrameHandle, 1971 void *ioContex 1972 ); 1973 1974 void satNonChainedVerifyCB( 1975 agsaRoot_t *agRoot, 1976 agsaIORequest_t *agIORequest, 1977 bit32 agIOStatus, 1978 agsaFisHeader_t *agFirstDword, 1979 bit32 agIOInfoLen, 1980 agsaFrameHandle_t agFrameHandle, 1981 void *ioContext 1982 ); 1983 1984 void satChainedVerifyCB( 1985 agsaRoot_t *agRoot, 1986 agsaIORequest_t *agIORequest, 1987 bit32 agIOStatus, 1988 agsaFisHeader_t *agFirstDword, 1989 bit32 agIOInfoLen, 1990 agsaFrameHandle_t agFrameHandle, 1991 void *ioContext 1992 ); 1993 1994 /***************************************************************************** 1995 *! \brief satTmResetLUN 1996 * 1997 * This routine is called to initiate a TM RESET LUN request to SATL. 1998 * This routine is independent of HW/LL API. 1999 * 2000 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2001 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 2002 * \param lun: Pointer to LUN. 2003 * \param currentTaskTag: Pointer to tag/context for this TM request. 2004 * 2005 * \return: 2006 * 2007 * \e tiSuccess: I/O request successfully initiated. 2008 * \e tiBusy: No resources available, try again later. 2009 * \e tiIONoDevice: Invalid device handle. 2010 * \e tiError: Other errors that prevent the I/O request to be started. 2011 * 2012 * 2013 *****************************************************************************/ 2014 osGLOBAL bit32 satTmResetLUN( 2015 tiRoot_t *tiRoot, 2016 tiIORequest_t *tiIORequest, 2017 tiDeviceHandle_t *tiDeviceHandle, 2018 tiScsiInitiatorRequest_t *tiScsiRequest, 2019 satIOContext_t *satIOContext, 2020 tiLUN_t *lun); 2021 2022 osGLOBAL bit32 satTmWarmReset( 2023 tiRoot_t *tiRoot, 2024 tiIORequest_t *tiIORequest, 2025 tiDeviceHandle_t *tiDeviceHandle, 2026 tiScsiInitiatorRequest_t *tiScsiRequest, 2027 satIOContext_t *satIOContext); 2028 2029 osGLOBAL bit32 satTDInternalTmReset( 2030 tiRoot_t *tiRoot, 2031 tiIORequest_t *tiIORequest, 2032 tiDeviceHandle_t *tiDeviceHandle, 2033 tiScsiInitiatorRequest_t *tiScsiRequest, 2034 satIOContext_t *satIOContext); 2035 2036 /***************************************************************************** 2037 *! \brief satTmAbortTask 2038 * 2039 * This routine is called to initiate a TM ABORT TASK request to SATL. 2040 * This routine is independent of HW/LL API. 2041 * 2042 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2043 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 2044 * \param taskTag: Pointer to the associated task where the TM 2045 * command is to be applied. 2046 * \param currentTaskTag: Pointer to tag/context for this TM request. 2047 * 2048 * \return: 2049 * 2050 * \e tiSuccess: I/O request successfully initiated. 2051 * \e tiBusy: No resources available, try again later. 2052 * \e tiIONoDevice: Invalid device handle. 2053 * \e tiError: Other errors that prevent the I/O request to be started. 2054 * 2055 * 2056 *****************************************************************************/ 2057 osGLOBAL bit32 satTmAbortTask( 2058 tiRoot_t *tiRoot, 2059 tiIORequest_t *tiIORequest, 2060 tiDeviceHandle_t *tiDeviceHandle, 2061 tiScsiInitiatorRequest_t *tiScsiRequest, 2062 satIOContext_t *satIOContext, 2063 tiIORequest_t *taskTag); 2064 2065 /***************************************************************************** 2066 *! \brief osSatResetCB 2067 * 2068 * This routine is called to notify the completion of SATA device reset 2069 * which was initiated previously through the call to sataLLReset(). 2070 * This routine is independent of HW/LL API. 2071 * 2072 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2073 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 2074 * \param resetStatus: Reset status either tiSuccess or tiError. 2075 * \param respFis: Pointer to the Register Device-To-Host FIS 2076 * received from the device. 2077 * 2078 * \return: None 2079 * 2080 *****************************************************************************/ 2081 2082 osGLOBAL void osSatResetCB( 2083 tiRoot_t *tiRoot, 2084 tiDeviceHandle_t *tiDeviceHandle, 2085 bit32 resetStatus, 2086 void *respFis); 2087 2088 osGLOBAL void 2089 ossaSATADeviceResetCB( 2090 agsaRoot_t *agRoot, 2091 agsaDevHandle_t *agDevHandle, 2092 bit32 resetStatus, 2093 void *resetparm); 2094 2095 /***************************************************************************** 2096 *! \brief osSatIOCompleted 2097 * 2098 * This routine is a callback for SATA completion that required FIS status 2099 * translation to SCSI status. 2100 * 2101 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2102 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 2103 * \param respFis: Pointer to status FIS to read. 2104 * \param respFisLen: Length of response FIS to read. 2105 * \param satIOContext: Pointer to SAT context. 2106 * \param interruptContext: Interrupt context 2107 * 2108 * \return: None 2109 * 2110 *****************************************************************************/ 2111 osGLOBAL void osSatIOCompleted( 2112 tiRoot_t *tiRoot, 2113 tiIORequest_t *tiIORequest, 2114 agsaFisHeader_t *agFirstDword, 2115 bit32 respFisLen, 2116 agsaFrameHandle_t agFrameHandle, 2117 satIOContext_t *satIOContext, 2118 bit32 interruptContext); 2119 2120 2121 /***************************************************************************** 2122 *! \brief tdssAddSataToSharedcontext 2123 * 2124 * Purpose: This function adds a discovered SATA device to a device list of 2125 * a port context 2126 * 2127 * \param tdsaPortContext Pointer to a port context 2128 * \param tdsaDeviceData Pointer to a device data 2129 * \param tsddPortContext_Instance Pointer to the target port context 2130 * \param agRoot Pointer to the root data structure of 2131 * TD and Lower layer 2132 * \param agDevHandle Pointer to a device handle 2133 * \param agSATADeviceInfo Pointer to SATA device info structure 2134 * 2135 * \Return: none 2136 * 2137 *****************************************************************************/ 2138 osGLOBAL void 2139 tdssRemoveSATAFromSharedcontext( 2140 tdsaPortContext_t *tdsaPortContext_Ins, 2141 tdsaDeviceData_t *tdsaDeviceData_ins, 2142 agsaRoot_t *agRoot 2143 ); 2144 2145 /*****************************************************************************/ 2146 /*! \brief SAT default ATA status and ATA error translation to SCSI. 2147 * 2148 * SSAT default ATA status and ATA error translation to SCSI. 2149 * 2150 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2151 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 2152 * \param satIOContext: Pointer to the SAT IO Context 2153 * \param pSense: Pointer to scsiRspSense_t 2154 * \param ataStatus: ATA status register 2155 * \param ataError: ATA error register 2156 * \param interruptContext: Interrupt context 2157 * 2158 * \return None 2159 */ 2160 /*****************************************************************************/ 2161 2162 GLOBAL void osSatDefaultTranslation( 2163 tiRoot_t *tiRoot, 2164 tiIORequest_t *tiIORequest, 2165 satIOContext_t *satIOContext, 2166 scsiRspSense_t *pSense, 2167 bit8 ataStatus, 2168 bit8 ataError, 2169 bit32 interruptContext ); 2170 2171 /*****************************************************************************/ 2172 /*! \brief Allocate resource for SAT intervally generated I/O. 2173 * 2174 * Allocate resource for SAT intervally generated I/O. 2175 * 2176 * \param tiRoot: Pointer to TISA driver/port instance. 2177 * \param satDevData: Pointer to SAT specific device data. 2178 * \param allocLength: Length in byte of the DMA mem to allocate, upto 2179 * one page size. 2180 * \param satIntIo: Pointer (output) to context for SAT internally 2181 * generated I/O that is allocated by this routine. 2182 * 2183 * \return If command is started successfully 2184 * - \e tiSuccess: Success. 2185 * - \e tiError: Failed allocating resource. 2186 */ 2187 /*****************************************************************************/ 2188 GLOBAL satInternalIo_t * satAllocIntIoResource( 2189 tiRoot_t *tiRoot, 2190 tiIORequest_t *tiIORequest, 2191 satDeviceData_t *satDevData, 2192 bit32 dmaAllocLength, 2193 satInternalIo_t *satIntIo); 2194 2195 /*****************************************************************************/ 2196 /*! \brief Send READ LOG EXT ATA PAGE 10h command to sata drive. 2197 * 2198 * Send READ LOG EXT ATA command PAGE 10h request to LL layer. 2199 * 2200 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2201 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 2202 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 2203 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 2204 * \param satIOContext_t: Pointer to the SAT IO Context 2205 * 2206 * \return If command is started successfully 2207 * - \e tiSuccess: I/O request successfully initiated. 2208 * - \e tiBusy: No resources available, try again later. 2209 * - \e tiIONoDevice: Invalid device handle. 2210 * - \e tiError: Other errors. 2211 */ 2212 /*****************************************************************************/ 2213 GLOBAL bit32 satSendReadLogExt( 2214 tiRoot_t *tiRoot, 2215 tiIORequest_t *tiIORequest, 2216 tiDeviceHandle_t *tiDeviceHandle, 2217 tiScsiInitiatorRequest_t *tiScsiRequest, 2218 satIOContext_t *satIOContext); 2219 2220 2221 /*****************************************************************************/ 2222 /*! \brief SAT implementation for SCSI satReadMediaSerialNumber. 2223 * 2224 * SAT implementation for SCSI Read Media Serial Number. 2225 * 2226 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2227 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 2228 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 2229 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 2230 * \param satIOContext_t: Pointer to the SAT IO Context 2231 * 2232 * \return If command is started successfully 2233 * - \e tiSuccess: I/O request successfully initiated. 2234 * - \e tiBusy: No resources available, try again later. 2235 * - \e tiIONoDevice: Invalid device handle. 2236 * - \e tiError: Other errors. 2237 */ 2238 /*****************************************************************************/ 2239 GLOBAL bit32 satReadMediaSerialNumber( 2240 tiRoot_t *tiRoot, 2241 tiIORequest_t *tiIORequest, 2242 tiDeviceHandle_t *tiDeviceHandle, 2243 tiScsiInitiatorRequest_t *tiScsiRequest, 2244 satIOContext_t *satIOContext); 2245 2246 /***************************************************************************** 2247 *! \brief satReadMediaSerialNumberCB 2248 * 2249 * This routine is a callback function called from ossaSATACompleted(). 2250 * This CB routine deals with Read Media Serial Number completion. 2251 * 2252 * \param agRoot: Handles for this instance of SAS/SATA hardware 2253 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 2254 * \param agIOStatus: Status of completed I/O. 2255 * \param agSATAParm1: Additional info based on status. 2256 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 2257 * length. 2258 * \param ioContext: Pointer to satIOContext_t. 2259 * 2260 * \return: none 2261 * 2262 *****************************************************************************/ 2263 void satReadMediaSerialNumberCB( 2264 agsaRoot_t *agRoot, 2265 agsaIORequest_t *agIORequest, 2266 bit32 agIOStatus, 2267 agsaFisHeader_t *agFirstDword, 2268 bit32 agIOInfoLen, 2269 agsaFrameHandle_t agFrameHandle, 2270 void *ioContext 2271 ); 2272 2273 /*****************************************************************************/ 2274 /*! \brief SAT implementation for SCSI satReadBuffer. 2275 * 2276 * SAT implementation for SCSI Read Buffer. 2277 * 2278 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2279 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 2280 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 2281 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 2282 * \param satIOContext_t: Pointer to the SAT IO Context 2283 * 2284 * \return If command is started successfully 2285 * - \e tiSuccess: I/O request successfully initiated. 2286 * - \e tiBusy: No resources available, try again later. 2287 * - \e tiIONoDevice: Invalid device handle. 2288 * - \e tiError: Other errors. 2289 */ 2290 /*****************************************************************************/ 2291 GLOBAL bit32 satReadBuffer( 2292 tiRoot_t *tiRoot, 2293 tiIORequest_t *tiIORequest, 2294 tiDeviceHandle_t *tiDeviceHandle, 2295 tiScsiInitiatorRequest_t *tiScsiRequest, 2296 satIOContext_t *satIOContext); 2297 2298 /***************************************************************************** 2299 *! \brief satReadBufferCB 2300 * 2301 * This routine is a callback function called from ossaSATACompleted(). 2302 * This CB routine deals with Read Buffer. 2303 * 2304 * \param agRoot: Handles for this instance of SAS/SATA hardware 2305 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 2306 * \param agIOStatus: Status of completed I/O. 2307 * \param agSATAParm1: Additional info based on status. 2308 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 2309 * length. 2310 * \param ioContext: Pointer to satIOContext_t. 2311 * 2312 * \return: none 2313 * 2314 *****************************************************************************/ 2315 void satReadBufferCB( 2316 agsaRoot_t *agRoot, 2317 agsaIORequest_t *agIORequest, 2318 bit32 agIOStatus, 2319 agsaFisHeader_t *agFirstDword, 2320 bit32 agIOInfoLen, 2321 agsaFrameHandle_t agFrameHandle, 2322 void *ioContext 2323 ); 2324 2325 /*****************************************************************************/ 2326 /*! \brief SAT implementation for SCSI satWriteBuffer. 2327 * 2328 * SAT implementation for SCSI Write Buffer. 2329 * 2330 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2331 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 2332 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 2333 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 2334 * \param satIOContext_t: Pointer to the SAT IO Context 2335 * 2336 * \return If command is started successfully 2337 * - \e tiSuccess: I/O request successfully initiated. 2338 * - \e tiBusy: No resources available, try again later. 2339 * - \e tiIONoDevice: Invalid device handle. 2340 * - \e tiError: Other errors. 2341 */ 2342 /*****************************************************************************/ 2343 GLOBAL bit32 satWriteBuffer( 2344 tiRoot_t *tiRoot, 2345 tiIORequest_t *tiIORequest, 2346 tiDeviceHandle_t *tiDeviceHandle, 2347 tiScsiInitiatorRequest_t *tiScsiRequest, 2348 satIOContext_t *satIOContext); 2349 2350 /***************************************************************************** 2351 *! \brief satWriteBufferCB 2352 * 2353 * This routine is a callback function called from ossaSATACompleted(). 2354 * This CB routine deals with Write Buffer. 2355 * 2356 * \param agRoot: Handles for this instance of SAS/SATA hardware 2357 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 2358 * \param agIOStatus: Status of completed I/O. 2359 * \param agSATAParm1: Additional info based on status. 2360 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 2361 * length. 2362 * \param ioContext: Pointer to satIOContext_t. 2363 * 2364 * \return: none 2365 * 2366 *****************************************************************************/ 2367 void satWriteBufferCB( 2368 agsaRoot_t *agRoot, 2369 agsaIORequest_t *agIORequest, 2370 bit32 agIOStatus, 2371 agsaFisHeader_t *agFirstDword, 2372 bit32 agIOInfoLen, 2373 agsaFrameHandle_t agFrameHandle, 2374 void *ioContext 2375 ); 2376 2377 /*****************************************************************************/ 2378 /*! \brief SAT implementation for SCSI satReassignBlocks. 2379 * 2380 * SAT implementation for SCSI Reassign Blocks. 2381 * 2382 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2383 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 2384 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 2385 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 2386 * \param satIOContext_t: Pointer to the SAT IO Context 2387 * 2388 * \return If command is started successfully 2389 * - \e tiSuccess: I/O request successfully initiated. 2390 * - \e tiBusy: No resources available, try again later. 2391 * - \e tiIONoDevice: Invalid device handle. 2392 * - \e tiError: Other errors. 2393 */ 2394 /*****************************************************************************/ 2395 GLOBAL bit32 satReassignBlocks( 2396 tiRoot_t *tiRoot, 2397 tiIORequest_t *tiIORequest, 2398 tiDeviceHandle_t *tiDeviceHandle, 2399 tiScsiInitiatorRequest_t *tiScsiRequest, 2400 satIOContext_t *satIOContext); 2401 2402 /***************************************************************************** 2403 *! \brief satReassignBlocksCB 2404 * 2405 * This routine is a callback function called from ossaSATACompleted(). 2406 * This CB routine deals with Reassign Blocks. 2407 * 2408 * \param agRoot: Handles for this instance of SAS/SATA hardware 2409 * \param agIORequest: Pointer to the LL I/O request context for this I/O. 2410 * \param agIOStatus: Status of completed I/O. 2411 * \param agSATAParm1: Additional info based on status. 2412 * \param agIOInfoLen: Length in bytes of overrun/underrun residual or FIS 2413 * length. 2414 * \param ioContext: Pointer to satIOContext_t. 2415 * 2416 * \return: none 2417 * 2418 *****************************************************************************/ 2419 void satReassignBlocksCB( 2420 agsaRoot_t *agRoot, 2421 agsaIORequest_t *agIORequest, 2422 bit32 agIOStatus, 2423 agsaFisHeader_t *agFirstDword, 2424 bit32 agIOInfoLen, 2425 agsaFrameHandle_t agFrameHandle, 2426 void *ioContext 2427 ); 2428 2429 /*****************************************************************************/ 2430 /*! \brief SAT implementation for SCSI satReassignBlocks_1. 2431 * 2432 * SAT implementation for SCSI Reassign Blocks. This is helper function for 2433 * satReassignBlocks and satReassignBlocksCB. This sends ATA verify command. 2434 * 2435 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2436 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 2437 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 2438 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 2439 * \param satIOContext_t: Pointer to the SAT IO Context 2440 * 2441 * \return If command is started successfully 2442 * - \e tiSuccess: I/O request successfully initiated. 2443 * - \e tiBusy: No resources available, try again later. 2444 * - \e tiIONoDevice: Invalid device handle. 2445 * - \e tiError: Other errors. 2446 */ 2447 /*****************************************************************************/ 2448 GLOBAL bit32 satReassignBlocks_1( 2449 tiRoot_t *tiRoot, 2450 tiIORequest_t *tiIORequest, 2451 tiDeviceHandle_t *tiDeviceHandle, 2452 tiScsiInitiatorRequest_t *tiScsiRequest, 2453 satIOContext_t *satIOContext, 2454 satIOContext_t *satOrgIOContext); 2455 2456 /*****************************************************************************/ 2457 /*! \brief SAT implementation for SCSI satReassignBlocks_2. 2458 * 2459 * SAT implementation for SCSI Reassign Blocks. This is helper function for 2460 * satReassignBlocks and satReassignBlocksCB. This sends ATA write command. 2461 * 2462 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2463 * \param tiIORequest: Pointer to TISA I/O request context for this I/O. 2464 * \param tiDeviceHandle: Pointer to TISA device handle for this I/O. 2465 * \param tiScsiRequest: Pointer to TISA SCSI I/O request and SGL list. 2466 * \param satIOContext_t: Pointer to the SAT IO Context 2467 * \param LBA: Pointer to the LBA to be processed 2468 * 2469 * \return If command is started successfully 2470 * - \e tiSuccess: I/O request successfully initiated. 2471 * - \e tiBusy: No resources available, try again later. 2472 * - \e tiIONoDevice: Invalid device handle. 2473 * - \e tiError: Other errors. 2474 */ 2475 /*****************************************************************************/ 2476 GLOBAL bit32 satReassignBlocks_2( 2477 tiRoot_t *tiRoot, 2478 tiIORequest_t *tiIORequest, 2479 tiDeviceHandle_t *tiDeviceHandle, 2480 tiScsiInitiatorRequest_t *tiScsiRequest, 2481 satIOContext_t *satIOContext, 2482 bit8 *LBA 2483 ); 2484 2485 /*****************************************************************************/ 2486 /*! \brief SAT implementation for SCSI satPrepareNewIO. 2487 * 2488 * This function fills in the fields of internal IO generated by TD layer. 2489 * This is mostly used in the callback functions. 2490 * 2491 * \param satNewIntIo: Pointer to the internal IO structure. 2492 * \param tiOrgIORequest: Pointer to the original tiIOrequest sent by OS layer 2493 * \param satDevData: Pointer to the device data. 2494 * \param scsiCmnd: Pointer to SCSI command. 2495 * \param satOrgIOContext: Pointer to the original SAT IO Context 2496 * 2497 * \return 2498 * - \e Pointer to the new SAT IO Context 2499 */ 2500 /*****************************************************************************/ 2501 GLOBAL satIOContext_t *satPrepareNewIO( 2502 satInternalIo_t *satNewIntIo, 2503 tiIORequest_t *tiOrgIORequest, 2504 satDeviceData_t *satDevData, 2505 tiIniScsiCmnd_t *scsiCmnd, 2506 satIOContext_t *satOrgIOContext 2507 ); 2508 2509 /***************************************************************************** 2510 *! \brief sataLLIOAbort 2511 * 2512 * This routine is called to initiate an I/O abort to LL layer. 2513 * This function implements/encapsulates HW and LL API dependency. 2514 * 2515 * \param tiRoot: Pointer to TISA initiator driver/port instance. 2516 * \param taskTag: Pointer to TISA I/O context to be aborted. 2517 * 2518 * \return: 2519 * 2520 * \e tiSuccess: Abort request was successfully initiated. 2521 * \e tiBusy: No resources available, try again later. 2522 * \e tiError: Other errors that prevent the abort request from being 2523 * started.. 2524 * 2525 * 2526 *****************************************************************************/ 2527 2528 GLOBAL bit32 sataLLIOAbort ( 2529 tiRoot_t *tiRoot, 2530 tiIORequest_t *taskTag ); 2531 2532 2533 2534 void satInquiryCB( 2535 agsaRoot_t *agRoot, 2536 agsaIORequest_t *agIORequest, 2537 bit32 agIOStatus, 2538 agsaFisHeader_t *agFirstDword, 2539 bit32 agIOInfoLen, 2540 agsaFrameHandle_t agFrameHandle, 2541 void *ioContext 2542 ); 2543 2544 void satInquiryIntCB( 2545 tiRoot_t *tiRoot, 2546 tiIORequest_t *tiIORequest, 2547 tiDeviceHandle_t *tiDeviceHandle, 2548 tiScsiInitiatorRequest_t *tiScsiRequest, 2549 satIOContext_t *satIOContext 2550 ); 2551 2552 GLOBAL bit32 satSendIDDev( 2553 tiRoot_t *tiRoot, 2554 tiIORequest_t *tiIORequest, 2555 tiDeviceHandle_t *tiDeviceHandle, 2556 tiScsiInitiatorRequest_t *tiScsiRequest, 2557 satIOContext_t *satIOContext); 2558 2559 2560 GLOBAL bit32 satStartIDDev( 2561 tiRoot_t *tiRoot, 2562 tiIORequest_t *tiIORequest, 2563 tiDeviceHandle_t *tiDeviceHandle, 2564 tiScsiInitiatorRequest_t *tiScsiRequest, 2565 satIOContext_t *satIOContext 2566 ); 2567 2568 void satSetDevInfo( 2569 satDeviceData_t *satDevData, 2570 agsaSATAIdentifyData_t *SATAIdData 2571 ); 2572 2573 GLOBAL bit32 satAddSATAStartIDDev( 2574 tiRoot_t *tiRoot, 2575 tiIORequest_t *tiIORequest, 2576 tiDeviceHandle_t *tiDeviceHandle, 2577 tiScsiInitiatorRequest_t *tiScsiRequest, 2578 satIOContext_t *satIOContext 2579 ); 2580 2581 GLOBAL bit32 satAddSATASendIDDev( 2582 tiRoot_t *tiRoot, 2583 tiIORequest_t *tiIORequest, 2584 tiDeviceHandle_t *tiDeviceHandle, 2585 tiScsiInitiatorRequest_t *tiScsiRequest, 2586 satIOContext_t *satIOContext 2587 ); 2588 2589 void satAddSATAIDDevCB( 2590 agsaRoot_t *agRoot, 2591 agsaIORequest_t *agIORequest, 2592 bit32 agIOStatus, 2593 agsaFisHeader_t *agFirstDword, 2594 bit32 agIOInfoLen, 2595 agsaFrameHandle_t agFrameHandle, 2596 void *ioContext 2597 ); 2598 2599 void satAddSATAIDDevCBReset( 2600 agsaRoot_t *agRoot, 2601 tdsaDeviceData_t *oneDeviceData, 2602 satIOContext_t *satIOContext, 2603 tdIORequestBody_t *tdIORequestBody 2604 ); 2605 2606 void satAddSATAIDDevCBCleanup( 2607 agsaRoot_t *agRoot, 2608 tdsaDeviceData_t *oneDeviceData, 2609 satIOContext_t *satIOContext, 2610 tdIORequestBody_t *tdIORequestBody 2611 ); 2612 2613 GLOBAL bit32 tdsaDiscoveryIntStartIDDev( 2614 tiRoot_t *tiRoot, 2615 tiIORequest_t *tiIORequest, 2616 tiDeviceHandle_t *tiDeviceHandle, 2617 tiScsiInitiatorRequest_t *tiScsiRequest, 2618 satIOContext_t *satIOContext 2619 ); 2620 2621 GLOBAL bit32 tdsaDiscoverySendIDDev( 2622 tiRoot_t *tiRoot, 2623 tiIORequest_t *tiIORequest, 2624 tiDeviceHandle_t *tiDeviceHandle, 2625 tiScsiInitiatorRequest_t *tiScsiRequest, 2626 satIOContext_t *satIOContext 2627 ); 2628 2629 void tdsaDiscoveryStartIDDevCB( 2630 agsaRoot_t *agRoot, 2631 agsaIORequest_t *agIORequest, 2632 bit32 agIOStatus, 2633 agsaFisHeader_t *agFirstDword, 2634 bit32 agIOInfoLen, 2635 agsaFrameHandle_t agFrameHandle, 2636 void *ioContext 2637 ); 2638 2639 2640 /* 2641 utility functions 2642 */ 2643 2644 bit32 satComputeCDB10LBA(satIOContext_t *satIOContext); 2645 bit32 satComputeCDB10TL(satIOContext_t *satIOContext); 2646 bit32 satComputeCDB12LBA(satIOContext_t *satIOContext); 2647 bit32 satComputeCDB12TL(satIOContext_t *satIOContext); 2648 bit32 satComputeCDB16LBA(satIOContext_t *satIOContext); 2649 bit32 satComputeCDB16TL(satIOContext_t *satIOContext); 2650 bit32 satComputeLoopNum(bit32 a, 2651 bit32 b); 2652 bit32 satAddNComparebit64(bit8 *a, bit8 *b); 2653 bit32 satAddNComparebit32(bit8 *a, bit8 *b); 2654 bit32 satCompareLBALimitbit(bit8 *lba); 2655 2656 /***************************************************************************** 2657 *! \brief 2658 * Purpose: bitwise set 2659 * 2660 * Parameters: 2661 * data - input output buffer 2662 * index - bit to set 2663 * 2664 * Return: 2665 * none 2666 * 2667 *****************************************************************************/ 2668 GLOBAL void 2669 satBitSet(bit8 *data, bit32 index); 2670 2671 /***************************************************************************** 2672 *! \brief 2673 * Purpose: bitwise clear 2674 * 2675 * Parameters: 2676 * data - input output buffer 2677 * index - bit to clear 2678 * 2679 * Return: 2680 * none 2681 * 2682 *****************************************************************************/ 2683 GLOBAL void 2684 satBitClear(bit8 *data, bit32 index); 2685 2686 /***************************************************************************** 2687 *! \brief 2688 * Purpose: bitwise test 2689 * 2690 * Parameters: 2691 * data - input output buffer 2692 * index - bit to test 2693 * 2694 * Return: 2695 * 0 - not set 2696 * 1 - set 2697 * 2698 *****************************************************************************/ 2699 GLOBAL agBOOLEAN 2700 satBitTest(bit8 *data, bit32 index); 2701 2702 /******************************************************************************/ 2703 /*! \brief allocate an available SATA tag 2704 * 2705 * allocate an available SATA tag 2706 * 2707 * \param pSatDevData 2708 * \param pTag 2709 * 2710 * \return -Success or fail- 2711 */ 2712 /*******************************************************************************/ 2713 GLOBAL bit32 satTagAlloc( 2714 tiRoot_t *tiRoot, 2715 satDeviceData_t *pSatDevData, 2716 bit8 *pTag 2717 ); 2718 2719 /******************************************************************************/ 2720 /*! \brief release an SATA tag 2721 * 2722 * release an available SATA tag 2723 * 2724 * \param pSatDevData 2725 * 2726 * \return -the tag- 2727 */ 2728 /*******************************************************************************/ 2729 GLOBAL bit32 satTagRelease( 2730 tiRoot_t *tiRoot, 2731 satDeviceData_t *pSatDevData, 2732 bit8 tag 2733 ); 2734 2735 GLOBAL void 2736 satDecrementPendingIO( 2737 tiRoot_t *tiRoot, 2738 tdsaContext_t *tdsaAllShared, 2739 satIOContext_t *satIOContext 2740 ); 2741 2742 GLOBAL bit32 satStartResetDevice( 2743 tiRoot_t *tiRoot, 2744 tiIORequest_t *tiIORequest, 2745 tiDeviceHandle_t *tiDeviceHandle, 2746 tiScsiInitiatorRequest_t *tiScsiRequest, 2747 satIOContext_t *satIOContext 2748 ); 2749 2750 GLOBAL bit32 satResetDevice( 2751 tiRoot_t *tiRoot, 2752 tiIORequest_t *tiIORequest, 2753 tiDeviceHandle_t *tiDeviceHandle, 2754 tiScsiInitiatorRequest_t *tiScsiRequest, 2755 satIOContext_t *satIOContext 2756 ); 2757 2758 GLOBAL void satResetDeviceCB( 2759 agsaRoot_t *agRoot, 2760 agsaIORequest_t *agIORequest, 2761 bit32 agIOStatus, 2762 agsaFisHeader_t *agFirstDword, 2763 bit32 agIOInfoLen, 2764 agsaFrameHandle_t agFrameHandle, 2765 void *ioContext 2766 ); 2767 2768 osGLOBAL bit32 satSubTM( 2769 tiRoot_t *tiRoot, 2770 tiDeviceHandle_t *tiDeviceHandle, 2771 bit32 task, 2772 tiLUN_t *lun, 2773 tiIORequest_t *taskTag, 2774 tiIORequest_t *currentTaskTag, 2775 bit32 NotifyOS 2776 ); 2777 2778 GLOBAL bit32 satStartDeResetDevice( 2779 tiRoot_t *tiRoot, 2780 tiIORequest_t *tiIORequest, 2781 tiDeviceHandle_t *tiDeviceHandle, 2782 tiScsiInitiatorRequest_t *tiScsiRequest, 2783 satIOContext_t *satIOContext 2784 ); 2785 2786 GLOBAL bit32 satDeResetDevice( 2787 tiRoot_t *tiRoot, 2788 tiIORequest_t *tiIORequest, 2789 tiDeviceHandle_t *tiDeviceHandle, 2790 tiScsiInitiatorRequest_t *tiScsiRequest, 2791 satIOContext_t *satIOContext 2792 ); 2793 2794 2795 GLOBAL void satDeResetDeviceCB( 2796 agsaRoot_t *agRoot, 2797 agsaIORequest_t *agIORequest, 2798 bit32 agIOStatus, 2799 agsaFisHeader_t *agFirstDword, 2800 bit32 agIOInfoLen, 2801 agsaFrameHandle_t agFrameHandle, 2802 void *ioContext 2803 ); 2804 2805 2806 GLOBAL bit32 satStartCheckPowerMode( 2807 tiRoot_t *tiRoot, 2808 tiIORequest_t *tiIORequest, 2809 tiDeviceHandle_t *tiDeviceHandle, 2810 tiScsiInitiatorRequest_t *tiScsiRequest, 2811 satIOContext_t *satIOContext 2812 ); 2813 2814 GLOBAL bit32 satCheckPowerMode( 2815 tiRoot_t *tiRoot, 2816 tiIORequest_t *tiIORequest, 2817 tiDeviceHandle_t *tiDeviceHandle, 2818 tiScsiInitiatorRequest_t *tiScsiRequest, 2819 satIOContext_t *satIOContext 2820 ); 2821 2822 GLOBAL void satCheckPowerModeCB( 2823 agsaRoot_t *agRoot, 2824 agsaIORequest_t *agIORequest, 2825 bit32 agIOStatus, 2826 agsaFisHeader_t *agFirstDword, 2827 bit32 agIOInfoLen, 2828 agsaFrameHandle_t agFrameHandle, 2829 void *ioContext 2830 ); 2831 2832 GLOBAL void satAbort(agsaRoot_t *agRoot, 2833 satIOContext_t *satIOContext 2834 ); 2835 2836 GLOBAL void satTranslateATAPIErrorsToSCSIErrors( 2837 bit8 bCommand, 2838 bit8 bATAStatus, 2839 bit8 bATAError, 2840 bit8 *pSenseKey, 2841 bit16 *pSenseCodeInfo 2842 ); 2843 2844 osGLOBAL void 2845 satSATADeviceReset(tiRoot_t *tiRoot, 2846 tdsaDeviceData_t *oneDeviceData, 2847 bit32 flag); 2848 2849 #ifdef REMOVED 2850 osGLOBAL void 2851 satSATADeviceReset( tiRoot_t *tiRoot, 2852 tdsaDeviceData_t *oneDeviceData, 2853 bit32 flag 2854 ); 2855 #endif 2856 #endif /*__SATPROTO_H__ */
Cache object: 5eb46e5567828adfb741c9d129a83016
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]