FreeBSD/Linux Kernel Cross Reference
sys/dev/ppbus/ppbconf.h

     /*-
      * Copyright (c) 1997, 1998, 1999 Nicolas Souchu
      * All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
      * are met:
      * 1. Redistributions of source code must retain the above copyright
      *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     *
     * $FreeBSD$
     *
     */
    #ifndef __PPBCONF_H
    #define __PPBCONF_H
    
    #define n(flags) (~(flags) & (flags))
    
    /*
     * Parallel Port Chipset control bits.
     */
    #define STROBE          0x01
    #define AUTOFEED        0x02
    #define nINIT           0x04
    #define SELECTIN        0x08
    #define IRQENABLE       0x10
    #define PCD             0x20
    
    #define nSTROBE         n(STROBE)
    #define nAUTOFEED       n(AUTOFEED)
    #define INIT            n(nINIT)
    #define nSELECTIN       n(SELECTIN)
    #define nPCD            n(PCD)
    
    /*
     * Parallel Port Chipset status bits.
     */
    #define TIMEOUT         0x01
    #define nFAULT          0x08
    #define SELECT          0x10
    #define PERROR          0x20
    #define nACK            0x40
    #define nBUSY           0x80
    
    #ifdef _KERNEL
    #include <sys/queue.h>
    
    /*
     * Parallel Port Bus sleep/wakeup queue.
     */
    #define PPBPRI  (PZERO+8)
    
    /*
     * Parallel Port Chipset mode masks.
     * NIBBLE mode is supposed to be available under each other modes.
     */
    #define PPB_COMPATIBLE  0x0     /* Centronics compatible mode */
    
    #define PPB_NIBBLE      0x1     /* reverse 4 bit mode */
    #define PPB_PS2         0x2     /* PS/2 byte mode */
    #define PPB_EPP         0x4     /* EPP mode, 32 bit */
    #define PPB_ECP         0x8     /* ECP mode */
    
    /* mode aliases */
    #define PPB_SPP         PPB_NIBBLE|PPB_PS2
    #define PPB_BYTE        PPB_PS2
    
    #define PPB_MASK                0x0f
    #define PPB_OPTIONS_MASK        0xf0
    
    #define PPB_IS_EPP(mode) (mode & PPB_EPP)
    #define PPB_IN_EPP_MODE(bus) (PPB_IS_EPP (ppb_get_mode (bus)))
    #define PPB_IN_NIBBLE_MODE(bus) (ppb_get_mode (bus) & PPB_NIBBLE)
    #define PPB_IN_PS2_MODE(bus) (ppb_get_mode (bus) & PPB_PS2)
    
    /*
     * Structure to store status information.
     */
    struct ppb_status {
            unsigned char status;
    
            unsigned int timeout:1;
            unsigned int error:1;
            unsigned int select:1;
           unsigned int paper_end:1;
           unsigned int ack:1;
           unsigned int busy:1;
   };
   
   /* Parallel port bus I/O opcodes */
   #define PPB_OUTSB_EPP   1
   #define PPB_OUTSW_EPP   2
   #define PPB_OUTSL_EPP   3
   #define PPB_INSB_EPP    4
   #define PPB_INSW_EPP    5
   #define PPB_INSL_EPP    6
   #define PPB_RDTR        7
   #define PPB_RSTR        8
   #define PPB_RCTR        9
   #define PPB_REPP_A      10
   #define PPB_REPP_D      11
   #define PPB_RECR        12
   #define PPB_RFIFO       13
   #define PPB_WDTR        14
   #define PPB_WSTR        15
   #define PPB_WCTR        16
   #define PPB_WEPP_A      17
   #define PPB_WEPP_D      18
   #define PPB_WECR        19
   #define PPB_WFIFO       20
   
   /*
    * How tsleep() is called in ppb_request_bus().
    */
   #define PPB_DONTWAIT    0
   #define PPB_NOINTR      0
   #define PPB_WAIT        0x1
   #define PPB_INTR        0x2
   #define PPB_POLL        0x4
   #define PPB_FOREVER     -1
   
   /*
    * Microsequence stuff.
    */
   #define PPB_MS_MAXLEN   64              /* XXX according to MS_INS_MASK */
   #define PPB_MS_MAXARGS  3               /* according to MS_ARG_MASK */
   
   /* maximum number of mode dependent
    * submicrosequences for in/out operations
    */
   #define PPB_MAX_XFER    6
   
   union ppb_insarg {
           int     i;
           void    *p;
           char    *c;
           int     (* f)(void *, char *);
   };
   
   struct ppb_microseq {
           int                     opcode;                 /* microins. opcode */
           union ppb_insarg        arg[PPB_MS_MAXARGS];    /* arguments */
   };
   
   /* microseqences used for GET/PUT operations */
   struct ppb_xfer {
           struct ppb_microseq *loop;              /* the loop microsequence */
   };
   
   /*
    * Parallel Port Bus Device structure.
    */
   struct ppb_data;                        /* see below */
   
   struct ppb_context {
           int valid;                      /* 1 if the struct is valid */
           int mode;                       /* XXX chipset operating mode */
   
           struct microseq *curpc;         /* pc in curmsq */
           struct microseq *curmsq;        /* currently executed microseqence */
   };
   
   /*
    * List of IVARS available to ppb device drivers
    */
   #define PPBUS_IVAR_MODE 0
   
   /* other fields are reserved to the ppbus internals */
   
   struct ppb_device {
   
           const char *name;               /* name of the device */
   
           u_int flags;                    /* flags */
   
           struct ppb_context ctx;         /* context of the device */
   
                                           /* mode dependent get msq. If NULL,
                                            * IEEE1284 code is used */
           struct ppb_xfer
                   get_xfer[PPB_MAX_XFER];
   
                                           /* mode dependent put msq. If NULL,
                                            * IEEE1284 code is used */
           struct ppb_xfer
                   put_xfer[PPB_MAX_XFER];
   
           driver_intr_t *intr_hook;
           void *intr_arg;
   };
   
   /* EPP standards */
   #define EPP_1_9         0x0                     /* default */
   #define EPP_1_7         0x1
   
   /* Parallel Port Chipset IVARS */               /* elsewhere XXX */
   #define PPC_IVAR_EPP_PROTO      0
   #define PPC_IVAR_LOCK           1
   #define PPC_IVAR_INTR_HANDLER   2
   
   /*
    * Maximum size of the PnP info string
    */
   #define PPB_PnP_STRING_SIZE     256                     /* XXX */
   
   /*
    * Parallel Port Bus structure.
    */
   struct ppb_data {
   
   #define PPB_PnP_PRINTER 0
   #define PPB_PnP_MODEM   1
   #define PPB_PnP_NET     2
   #define PPB_PnP_HDC     3
   #define PPB_PnP_PCMCIA  4
   #define PPB_PnP_MEDIA   5
   #define PPB_PnP_FDC     6
   #define PPB_PnP_PORTS   7
   #define PPB_PnP_SCANNER 8
   #define PPB_PnP_DIGICAM 9
   #define PPB_PnP_UNKNOWN 10
           int class_id;           /* not a PnP device if class_id < 0 */
   
           int state;              /* current IEEE1284 state */
           int error;              /* last IEEE1284 error */
   
           int mode;               /* IEEE 1284-1994 mode
                                    * NIBBLE, PS2, EPP or ECP */
   
           device_t ppb_owner;     /* device which owns the bus */
   
           struct mtx *ppc_lock;   /* lock of parent device */
           struct resource *ppc_irq_res;
   };
   
   struct callout;
   
   typedef int (*ppc_intr_handler)(void *);
   
   extern int ppb_attach_device(device_t);
   extern int ppb_request_bus(device_t, device_t, int);
   extern int ppb_release_bus(device_t, device_t);
   
   /* bus related functions */
   extern void ppb_lock(device_t);
   extern void ppb_unlock(device_t);
   extern void _ppb_assert_locked(device_t, const char *, int);
   extern void ppb_init_callout(device_t, struct callout *, int);
   extern int ppb_sleep(device_t, void *, int, const char *, int);
   extern int ppb_get_status(device_t, struct ppb_status *);
   extern int ppb_poll_bus(device_t, int, char, char, int);
   extern int ppb_reset_epp_timeout(device_t);
   extern int ppb_ecp_sync(device_t);
   extern int ppb_get_epp_protocol(device_t);
   extern int ppb_set_mode(device_t, int);         /* returns old mode */
   extern int ppb_get_mode(device_t);              /* returns current mode */
   extern int ppb_write(device_t, char *, int, int);
   
   #ifdef INVARIANTS
   #define ppb_assert_locked(dev)  _ppb_assert_locked(dev, __FILE__, __LINE__)
   #else
   #define ppb_assert_locked(dev)
   #endif
   #endif /* _KERNEL */
   
   #endif /* !__PPBCONF_H */

Cache object: 7e9366d41188ef3efb23212bebf5931e