1 /*
2 * Copyright (c) 2017-2018 Cavium, Inc.
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
16 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
19 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
20 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
21 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
22 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
23 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
24 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
25 * POSSIBILITY OF SUCH DAMAGE.
26 *
27 * $FreeBSD$
28 *
29 */
30
31 #ifndef __STORAGE_COMMON__
32 #define __STORAGE_COMMON__
33 /*********************/
34 /* SCSI CONSTANTS */
35 /*********************/
36
37 #define SCSI_MAX_NUM_OF_CMDQS (NUM_OF_GLOBAL_QUEUES / 2)
38 // Each Resource ID is one-one-valued mapped by the driver to a BDQ Resource ID (for instance per port)
39 #define BDQ_NUM_RESOURCES (4)
40
41 // ID 0 : RQ, ID 1 : IMMEDIATE_DATA, ID 2 : TQ
42 #define BDQ_ID_RQ (0)
43 #define BDQ_ID_IMM_DATA (1)
44 #define BDQ_ID_TQ (2)
45 #define BDQ_NUM_IDS (3)
46
47 #define SCSI_NUM_SGES_SLOW_SGL_THR 8
48
49 #define BDQ_MAX_EXTERNAL_RING_SIZE (1<<15)
50
51 /* SCSI op codes */
52 #define SCSI_OPCODE_COMPARE_AND_WRITE (0x89)
53 #define SCSI_OPCODE_READ_10 (0x28)
54 #define SCSI_OPCODE_WRITE_6 (0x0A)
55 #define SCSI_OPCODE_WRITE_10 (0x2A)
56 #define SCSI_OPCODE_WRITE_12 (0xAA)
57 #define SCSI_OPCODE_WRITE_16 (0x8A)
58 #define SCSI_OPCODE_WRITE_AND_VERIFY_10 (0x2E)
59 #define SCSI_OPCODE_WRITE_AND_VERIFY_12 (0xAE)
60 #define SCSI_OPCODE_WRITE_AND_VERIFY_16 (0x8E)
61
62 /*
63 * iSCSI Drv opaque
64 */
65 struct iscsi_drv_opaque
66 {
67 __le16 reserved_zero[3];
68 __le16 opaque;
69 };
70
71 /*
72 * Scsi 2B/8B opaque union
73 */
74 union scsi_opaque
75 {
76 struct regpair fcoe_opaque /* 8 Bytes opaque */;
77 struct iscsi_drv_opaque iscsi_opaque /* 2 Bytes opaque */;
78 };
79
80 /*
81 * SCSI buffer descriptor
82 */
83 struct scsi_bd
84 {
85 struct regpair address /* Physical Address of buffer */;
86 union scsi_opaque opaque /* Driver Metadata (preferably Virtual Address of buffer) */;
87 };
88
89 /*
90 * Scsi Drv BDQ struct
91 */
92 struct scsi_bdq_ram_drv_data
93 {
94 __le16 external_producer /* BDQ External Producer; updated by driver when it loads BDs to External Ring */;
95 __le16 reserved0[3];
96 };
97
98 /*
99 * SCSI SGE entry
100 */
101 struct scsi_sge
102 {
103 struct regpair sge_addr /* SGE address */;
104 __le32 sge_len /* SGE length */;
105 __le32 reserved;
106 };
107
108 /*
109 * Cached SGEs section
110 */
111 struct scsi_cached_sges
112 {
113 struct scsi_sge sge[4] /* Cached SGEs section */;
114 };
115
116 /*
117 * Scsi Drv CMDQ struct
118 */
119 struct scsi_drv_cmdq
120 {
121 __le16 cmdq_cons /* CMDQ consumer - updated by driver when CMDQ is consumed */;
122 __le16 reserved0;
123 __le32 reserved1;
124 };
125
126 /*
127 * Common SCSI init params passed by driver to FW in function init ramrod
128 */
129 struct scsi_init_func_params
130 {
131 __le16 num_tasks /* Number of tasks in global task list */;
132 u8 log_page_size /* log of page size value */;
133 u8 debug_mode /* Use iscsi_debug_mode enum */;
134 u8 reserved2[12];
135 };
136
137 /*
138 * SCSI RQ/CQ/CMDQ firmware function init parameters
139 */
140 struct scsi_init_func_queues
141 {
142 struct regpair glbl_q_params_addr /* Global Qs (CQ/RQ/CMDQ) params host address */;
143 __le16 rq_buffer_size /* The buffer size of RQ BDQ */;
144 __le16 cq_num_entries /* CQ num entries */;
145 __le16 cmdq_num_entries /* CMDQ num entries */;
146 u8 bdq_resource_id /* Each function-init Ramrod maps its funciton ID to a BDQ function ID, each BDQ function ID contains per-BDQ-ID BDQs */;
147 u8 q_validity;
148 #define SCSI_INIT_FUNC_QUEUES_RQ_VALID_MASK 0x1
149 #define SCSI_INIT_FUNC_QUEUES_RQ_VALID_SHIFT 0
150 #define SCSI_INIT_FUNC_QUEUES_IMM_DATA_VALID_MASK 0x1
151 #define SCSI_INIT_FUNC_QUEUES_IMM_DATA_VALID_SHIFT 1
152 #define SCSI_INIT_FUNC_QUEUES_CMD_VALID_MASK 0x1
153 #define SCSI_INIT_FUNC_QUEUES_CMD_VALID_SHIFT 2
154 #define SCSI_INIT_FUNC_QUEUES_TQ_VALID_MASK 0x1
155 #define SCSI_INIT_FUNC_QUEUES_TQ_VALID_SHIFT 3
156 #define SCSI_INIT_FUNC_QUEUES_SOC_EN_MASK 0x1 /* This bit is valid if TQ is enabled for this function, SOC option enabled/disabled */
157 #define SCSI_INIT_FUNC_QUEUES_SOC_EN_SHIFT 4
158 #define SCSI_INIT_FUNC_QUEUES_SOC_NUM_OF_BLOCKS_LOG_MASK 0x7 /* Relevant for TQe SOC option - num of blocks in SGE - log */
159 #define SCSI_INIT_FUNC_QUEUES_SOC_NUM_OF_BLOCKS_LOG_SHIFT 5
160 __le16 cq_cmdq_sb_num_arr[SCSI_MAX_NUM_OF_CMDQS] /* CQ/CMDQ status block number array */;
161 u8 num_queues /* Number of continuous global queues used */;
162 u8 queue_relative_offset /* offset of continuous global queues used */;
163 u8 cq_sb_pi /* Protocol Index of CQ in status block (CQ consumer) */;
164 u8 cmdq_sb_pi /* Protocol Index of CMDQ in status block (CMDQ consumer) */;
165 u8 bdq_pbl_num_entries[BDQ_NUM_IDS] /* Per BDQ ID, the PBL page size (number of entries in PBL) */;
166 u8 reserved1 /* reserved */;
167 struct regpair bdq_pbl_base_address[BDQ_NUM_IDS] /* Per BDQ ID, the PBL page Base Address */;
168 __le16 bdq_xoff_threshold[BDQ_NUM_IDS] /* BDQ XOFF threshold - when number of entries will be below that TH, it will send XOFF */;
169 __le16 cmdq_xoff_threshold /* CMDQ XOFF threshold - when number of entries will be below that TH, it will send XOFF */;
170 __le16 bdq_xon_threshold[BDQ_NUM_IDS] /* BDQ XON threshold - when number of entries will be above that TH, it will send XON */;
171 __le16 cmdq_xon_threshold /* CMDQ XON threshold - when number of entries will be above that TH, it will send XON */;
172 };
173
174 /*
175 * Scsi Drv BDQ Data struct (2 BDQ IDs: 0 - RQ, 1 - Immediate Data)
176 */
177 struct scsi_ram_per_bdq_resource_drv_data
178 {
179 struct scsi_bdq_ram_drv_data drv_data_per_bdq_id[BDQ_NUM_IDS] /* External ring data */;
180 };
181
182 /*
183 * SCSI SGL types
184 */
185 enum scsi_sgl_mode
186 {
187 SCSI_TX_SLOW_SGL /* Slow-SGL: More than SCSI_NUM_SGES_SLOW_SGL_THR SGEs and there is at least 1 middle SGE than is smaller than a page size. May be only at TX */,
188 SCSI_FAST_SGL /* Fast SGL: Less than SCSI_NUM_SGES_SLOW_SGL_THR SGEs or all middle SGEs are at least a page size */,
189 MAX_SCSI_SGL_MODE
190 };
191
192 /*
193 * SCSI SGL parameters
194 */
195 struct scsi_sgl_params
196 {
197 struct regpair sgl_addr /* SGL base address */;
198 __le32 sgl_total_length /* SGL total legnth (bytes) */;
199 __le32 sge_offset /* Offset in SGE (bytes) */;
200 __le16 sgl_num_sges /* Number of SGLs sges */;
201 u8 sgl_index /* SGL index */;
202 u8 reserved;
203 };
204
205 /*
206 * SCSI terminate connection params
207 */
208 struct scsi_terminate_extra_params
209 {
210 __le16 unsolicited_cq_count /* Counts number of CQ placements done due to arrival of unsolicited packets on this connection */;
211 __le16 cmdq_count /* Counts number of CMDQ placements on this connection */;
212 u8 reserved[4];
213 };
214
215 /*
216 * SCSI Task Queue Element
217 */
218 struct scsi_tqe
219 {
220 __le16 itid /* Physical Address of buffer */;
221 };
222
223 #endif /* __STORAGE_COMMON__ */
Cache object: f6e6814aee46ce5470629d5c6a5df3ad
|