1 /*-
2 ****************************************************************
3 * Copyright (c) 1996-2000 Distributed Processing Technology Corporation
4 * Copyright (c) 2000 Adaptec Corporation.
5 * All rights reserved.
6 *
7 * Copyright 1999 I2O Special Interest Group (I2O SIG). All rights reserved.
8 * All rights reserved
9 *
10 * TERMS AND CONDITIONS OF USE
11 *
12 * Redistribution and use in source form, with or without modification, are
13 * permitted provided that redistributions of source code must retain the
14 * above copyright notice, this list of conditions and the following disclaimer.
15 *
16 * This software is provided `as is' by Distributed Processing Technology and
17 * any express or implied warranties, including, but not limited to, the
18 * implied warranties of merchantability and fitness for a particular purpose,
19 * are disclaimed. In no event shall Distributed Processing Technology be
20 * liable for any direct, indirect, incidental, special, exemplary or
21 * consequential damages (including, but not limited to, procurement of
22 * substitute goods or services; loss of use, data, or profits; or business
23 * interruptions) however caused and on any theory of liability, whether in
24 * contract, strict liability, or tort (including negligence or otherwise)
25 * arising in any way out of the use of this driver software, even if advised
26 * of the possibility of such damage.
27 *
28 * This header file, and any modifications of this header file, are provided
29 * contingent upon your agreement and adherence to the here-listed terms and
30 * conditions. By accepting and/or using this header file, you agree to abide
31 * by these terms and conditions and that these terms and conditions will be
32 * construed and governed in accordance with the laws of the State of California,
33 * without reference to conflict-of-law provisions. If you do not agree
34 * to these terms and conditions, please delete this file, and any copies,
35 * permanently, without making any use thereof.
36 *
37 * THIS HEADER FILE IS PROVIDED FREE OF CHARGE ON AN AS-IS BASIS WITHOUT
38 * WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
39 * TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
40 * PURPOSE. I2O SIG DOES NOT WARRANT THAT THIS HEADER FILE WILL MEET THE
41 * USER'S REQUIREMENTS OR THAT ITS OPERATION WILL BE UNINTERRUPTED OR
42 * ERROR-FREE.
43 *
44 * I2O SIG DISCLAIMS ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF
45 * ANY PROPRIETARY RIGHTS, RELATING TO THE IMPLEMENTATION OF THE I2O
46 * SPECIFICATIONS. I2O SIG DOES NOT WARRANT OR REPRESENT THAT SUCH
47 * IMPLEMENTATIONS WILL NOT INFRINGE SUCH RIGHTS.
48 *
49 * THE USER OF THIS HEADER FILE SHALL HAVE NO RECOURSE TO I2O SIG FOR ANY
50 * ACTUAL OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOST DATA
51 * OR LOST PROFITS ARISING OUT OF THE USE OR INABILITY TO USE THIS PROGRAM.
52 *
53 * I2O SIG grants the user of this header file a license to copy, distribute,
54 * and modify it, for any purpose, under the following terms. Any copying,
55 * distribution, or modification of this header file must not delete or alter
56 * the copyright notice of I2O SIG or any of these Terms and Conditions.
57 *
58 * Any distribution of this header file must not include a charge for the
59 * header file (unless such charges are strictly for the physical acts of
60 * copying or transferring copies). However, distribution of a product in
61 * which this header file is embedded may include a charge so long as any
62 * such charge does not include any charge for the header file itself.
63 *
64 * Any modification of this header file constitutes a derivative work based
65 * on this header file. Any distribution of such derivative work: (1) must
66 * include prominent notices that the header file has been changed from the
67 * original, together with the dates of any changes; (2) automatically includes
68 * this same license to the original header file from I2O SIG, without any
69 * restriction thereon from the distributing user; and (3) must include a
70 * grant of license of the modified file under the same terms and conditions
71 * as these Terms and Conditions.
72 *
73 * The I2O SIG Web site can be found at: http://www.i2osig.org
74 *
75 * The I2O SIG encourages you to deposit derivative works based on this
76 * header file at the I2O SIG Web site. Furthermore, to become a Registered
77 * Developer of the I2O SIG, sign up at the Web site or call 415.750.8352
78 * (United States).
79 *
80 * $FreeBSD: src/sys/dev/asr/i2obscsi.h,v 1.6 2005/01/06 01:42:29 imp Exp $
81 *
82 ****************************************************************/
83
84 #if !defined(I2O_BASE_SCSI_HDR)
85 #define I2O_BASE_SCSI_HDR
86
87 #if ((defined(KERNEL) || defined(_KERNEL)) && defined(__FreeBSD__))
88 # if (KERN_VERSION < 3)
89 # include "i386/pci/i2omsg.h" /* Include the Base Message file */
90 # else
91 # include "dev/asr/i2omsg.h"
92 # endif
93 #else
94 # include "i2omsg.h" /* Include the Base Message file */
95 #endif
96
97
98 #define I2OBSCSI_REV 1_5_1 /* Header file revision string */
99
100
101
102 /*****************************************************************************
103 *
104 * I2OBSCSI.h -- I2O Base SCSI Device Class Message defintion file
105 *
106 * This file contains information presented in Chapter 6, Section 6 & 7 of
107 * the I2O Specification.
108 *
109 * Revision History: (Revision History tracks the revision number of the I2O
110 * specification)
111 *
112 * .92 - First marked revsion used for Proof of Concept.
113 * .93 - Change to match the rev .93 of the spec.
114 * .95 - Updated to Rev .95 of 2/5/96.
115 * 1.00 - Checked and Updated against spec version 1.00 4/9/96.
116 * 1.xx - Updated to the 1.x version of the I2O Specification on 11/11/96.
117 * 1.xx - 11/14/96
118 * 1) Removed duplicate device type definitions.
119 * 2) Added "DSC" to Detailed Status Code definitions.
120 * 3) Changed SCSI-3 LUN fields from U64 to U8 array.
121 * 1.xx 11/15/96 - Added #pragma statments for i960.
122 * 1.xx 11/20/96 - Changed duplicate Bus Scan structure to Bus Reset.
123 * 1.xx 12/05/96 - Added Auto Request Sense flag definition.
124 * 1.5d 03/06/97 - Update for spec. draft version 1.5d.
125 * 1) Converted SCSI bus adapter class to generic in i2oadptr.h.
126 * 2) Fixed DSC reference: changed from _BUS_SCAN to _BUS_RESET.
127 * 1.5d 03/031/97 - Made AutoSense flag definition consistent with spec.
128 * 1.5d 04/11/97 - Corrections from review cycle:
129 * 1) Corrected typo in I2O_SCSI_PERIPHERAL_TYPE_PARALLEL.
130 * 2) Corrected typo in I2O_SCSI_PORT_CONN_UNSHIELDED_P_HD.
131 * 1.5.1 05/02/97 - Corrections from review cycle:
132 * 1) Remove #include for i2omstor.h.
133 * 2) Add revision string.
134 * 3) Convert tabs to spaces.
135 * 4) New disclaimer.
136 *
137 *****************************************************************************/
138
139 /*
140 NOTES:
141
142 Gets, reads, receives, etc. are all even numbered functions.
143 Sets, writes, sends, etc. are all odd numbered functions.
144 Functions that both send and receive data can be either but an attempt is made
145 to use the function number that indicates the greater transfer amount.
146 Functions that do not send or receive data use odd function numbers.
147
148 Some functions are synonyms like read, receive and send, write.
149
150 All common functions will have a code of less than 0x80.
151 Unique functions to a class will start at 0x80.
152 Executive Functions start at 0xA0.
153
154 Utility Message function codes range from 0 - 0x1f
155 Base Message function codes range from 0x20 - 0xfe
156 Private Message function code is 0xff.
157 */
158
159 PRAGMA_ALIGN_PUSH
160
161 PRAGMA_PACK_PUSH
162
163 /*
164 SCSI Peripheral Class specific functions
165
166 Although the names are SCSI Peripheral class specific, the values
167 assigned are common with other classes when applicable.
168 */
169
170 #define I2O_SCSI_DEVICE_RESET 0x27
171 #define I2O_SCSI_SCB_ABORT 0x83
172 #define I2O_SCSI_SCB_EXEC 0x81
173
174 /*
175 Detailed Status Codes for SCSI operations
176
177 The 16-bit Detailed Status Code field for SCSI operations is divided
178 into two separate 8-bit fields. The lower 8 bits are used to report
179 Device Status information. The upper 8 bits are used to report
180 Adapter Status information. The definitions for these two fields,
181 however, will be consistent with the standard reply message frame
182 structure declaration, which treats this as a single 16-bit field.
183 */
184
185
186 /* SCSI Device Completion Status Codes (defined by SCSI-2/3)*/
187
188 #define I2O_SCSI_DEVICE_DSC_MASK 0x00FF
189
190 #define I2O_SCSI_DSC_SUCCESS 0x0000
191 #define I2O_SCSI_DSC_CHECK_CONDITION 0x0002
192 #define I2O_SCSI_DSC_BUSY 0x0008
193 #define I2O_SCSI_DSC_RESERVATION_CONFLICT 0x0018
194 #define I2O_SCSI_DSC_COMMAND_TERMINATED 0x0022
195 #define I2O_SCSI_DSC_TASK_SET_FULL 0x0028
196 #define I2O_SCSI_DSC_ACA_ACTIVE 0x0030
197
198 /* SCSI Adapter Status Codes (based on CAM-1) */
199
200 #define I2O_SCSI_HBA_DSC_MASK 0xFF00
201
202 #define I2O_SCSI_HBA_DSC_SUCCESS 0x0000
203
204 #define I2O_SCSI_HBA_DSC_REQUEST_ABORTED 0x0200
205 #define I2O_SCSI_HBA_DSC_UNABLE_TO_ABORT 0x0300
206 #define I2O_SCSI_HBA_DSC_COMPLETE_WITH_ERROR 0x0400
207 #define I2O_SCSI_HBA_DSC_ADAPTER_BUSY 0x0500
208 #define I2O_SCSI_HBA_DSC_REQUEST_INVALID 0x0600
209 #define I2O_SCSI_HBA_DSC_PATH_INVALID 0x0700
210 #define I2O_SCSI_HBA_DSC_DEVICE_NOT_PRESENT 0x0800
211 #define I2O_SCSI_HBA_DSC_UNABLE_TO_TERMINATE 0x0900
212 #define I2O_SCSI_HBA_DSC_SELECTION_TIMEOUT 0x0A00
213 #define I2O_SCSI_HBA_DSC_COMMAND_TIMEOUT 0x0B00
214
215 #define I2O_SCSI_HBA_DSC_MR_MESSAGE_RECEIVED 0x0D00
216 #define I2O_SCSI_HBA_DSC_SCSI_BUS_RESET 0x0E00
217 #define I2O_SCSI_HBA_DSC_PARITY_ERROR_FAILURE 0x0F00
218 #define I2O_SCSI_HBA_DSC_AUTOSENSE_FAILED 0x1000
219 #define I2O_SCSI_HBA_DSC_NO_ADAPTER 0x1100
220 #define I2O_SCSI_HBA_DSC_DATA_OVERRUN 0x1200
221 #define I2O_SCSI_HBA_DSC_UNEXPECTED_BUS_FREE 0x1300
222 #define I2O_SCSI_HBA_DSC_SEQUENCE_FAILURE 0x1400
223 #define I2O_SCSI_HBA_DSC_REQUEST_LENGTH_ERROR 0x1500
224 #define I2O_SCSI_HBA_DSC_PROVIDE_FAILURE 0x1600
225 #define I2O_SCSI_HBA_DSC_BDR_MESSAGE_SENT 0x1700
226 #define I2O_SCSI_HBA_DSC_REQUEST_TERMINATED 0x1800
227
228 #define I2O_SCSI_HBA_DSC_IDE_MESSAGE_SENT 0x3300
229 #define I2O_SCSI_HBA_DSC_RESOURCE_UNAVAILABLE 0x3400
230 #define I2O_SCSI_HBA_DSC_UNACKNOWLEDGED_EVENT 0x3500
231 #define I2O_SCSI_HBA_DSC_MESSAGE_RECEIVED 0x3600
232 #define I2O_SCSI_HBA_DSC_INVALID_CDB 0x3700
233 #define I2O_SCSI_HBA_DSC_LUN_INVALID 0x3800
234 #define I2O_SCSI_HBA_DSC_SCSI_TID_INVALID 0x3900
235 #define I2O_SCSI_HBA_DSC_FUNCTION_UNAVAILABLE 0x3A00
236 #define I2O_SCSI_HBA_DSC_NO_NEXUS 0x3B00
237 #define I2O_SCSI_HBA_DSC_SCSI_IID_INVALID 0x3C00
238 #define I2O_SCSI_HBA_DSC_CDB_RECEIVED 0x3D00
239 #define I2O_SCSI_HBA_DSC_LUN_ALREADY_ENABLED 0x3E00
240 #define I2O_SCSI_HBA_DSC_BUS_BUSY 0x3F00
241
242 #define I2O_SCSI_HBA_DSC_QUEUE_FROZEN 0x4000
243
244
245 /****************************************************************************/
246
247 /* SCSI Peripheral Device Parameter Groups */
248
249 /****************************************************************************/
250
251
252 /* SCSI Configuration and Operating Structures and Defines */
253
254
255 #define I2O_SCSI_DEVICE_INFO_GROUP_NO 0x0000
256 #define I2O_SCSI_DEVICE_BUS_PORT_INFO_GROUP_NO 0x0001
257
258
259 /* - 0000h - SCSI Device Information Parameters Group defines */
260
261 /* Device Type */
262
263 #define I2O_SCSI_DEVICE_TYPE_DIRECT 0x00
264 #define I2O_SCSI_DEVICE_TYPE_SEQUENTIAL 0x01
265 #define I2O_SCSI_DEVICE_TYPE_PRINTER 0x02
266 #define I2O_SCSI_DEVICE_TYPE_PROCESSOR 0x03
267 #define I2O_SCSI_DEVICE_TYPE_WORM 0x04
268 #define I2O_SCSI_DEVICE_TYPE_CDROM 0x05
269 #define I2O_SCSI_DEVICE_TYPE_SCANNER 0x06
270 #define I2O_SCSI_DEVICE_TYPE_OPTICAL 0x07
271 #define I2O_SCSI_DEVICE_TYPE_MEDIA_CHANGER 0x08
272 #define I2O_SCSI_DEVICE_TYPE_COMM 0x09
273 #define I2O_SCSI_DEVICE_GRAPHICS_1 0x0A
274 #define I2O_SCSI_DEVICE_GRAPHICS_2 0x0B
275 #define I2O_SCSI_DEVICE_TYPE_ARRAY_CONT 0x0C
276 #define I2O_SCSI_DEVICE_TYPE_SES 0x0D
277 #define I2O_SCSI_DEVICE_TYPE_UNKNOWN 0x1F
278
279 /* Flags */
280
281 #define I2O_SCSI_PERIPHERAL_TYPE_FLAG 0x01
282 #define I2O_SCSI_PERIPHERAL_TYPE_PARALLEL 0x00
283 #define I2O_SCSI_PERIPHERAL_TYPE_SERIAL 0x01
284
285 #define I2O_SCSI_RESERVED_FLAG 0x02
286
287 #define I2O_SCSI_DISCONNECT_FLAG 0x04
288 #define I2O_SCSI_DISABLE_DISCONNECT 0x00
289 #define I2O_SCSI_ENABLE_DISCONNECT 0x04
290
291 #define I2O_SCSI_MODE_MASK 0x18
292 #define I2O_SCSI_MODE_SET_DATA 0x00
293 #define I2O_SCSI_MODE_SET_DEFAULT 0x08
294 #define I2O_SCSI_MODE_SET_SAFEST 0x10
295
296 #define I2O_SCSI_DATA_WIDTH_MASK 0x60
297 #define I2O_SCSI_DATA_WIDTH_8 0x00
298 #define I2O_SCSI_DATA_WIDTH_16 0x20
299 #define I2O_SCSI_DATA_WIDTH_32 0x40
300
301 #define I2O_SCSI_SYNC_NEGOTIATION_FLAG 0x80
302 #define I2O_SCSI_DISABLE_SYNC_NEGOTIATION 0x00
303 #define I2O_SCSI_ENABLE_SYNC_NEGOTIATION 0x80
304
305
306 /* - 0001h - SCSI Device Bus Port Info Parameters Group defines */
307
308 /* Physical */
309
310 #define I2O_SCSI_PORT_PHYS_OTHER 0x01
311 #define I2O_SCSI_PORT_PHYS_UNKNOWN 0x02
312 #define I2O_SCSI_PORT_PHYS_PARALLEL 0x03
313 #define I2O_SCSI_PORT_PHYS_FIBRE_CHANNEL 0x04
314 #define I2O_SCSI_PORT_PHYS_SERIAL_P1394 0x05
315 #define I2O_SCSI_PORT_PHYS_SERIAL_SSA 0x06
316
317 /* Electrical */
318
319 #define I2O_SCSI_PORT_ELEC_OTHER 0x01
320 #define I2O_SCSI_PORT_ELEC_UNKNOWN 0x02
321 #define I2O_SCSI_PORT_ELEC_SINGLE_ENDED 0x03
322 #define I2O_SCSI_PORT_ELEC_DIFFERENTIAL 0x04
323 #define I2O_SCSI_PORT_ELEC_LOW_VOLT_DIFF 0x05
324 #define I2O_SCSI_PORT_ELEC_OPTICAL 0x06
325
326 /* Isochronous */
327
328 #define I2O_SCSI_PORT_ISOC_NO 0x00
329 #define I2O_SCSI_PORT_ISOC_YES 0x01
330 #define I2O_SCSI_PORT_ISOC_UNKNOWN 0x02
331
332 /* Connector Type */
333
334 #define I2O_SCSI_PORT_CONN_OTHER 0x01
335 #define I2O_SCSI_PORT_CONN_UNKNOWN 0x02
336 #define I2O_SCSI_PORT_CONN_NONE 0x03
337 #define I2O_SCSI_PORT_CONN_SHIELDED_A_HD 0x04
338 #define I2O_SCSI_PORT_CONN_UNSHIELDED_A_HD 0x05
339 #define I2O_SCSI_PORT_CONN_SHIELDED_A_LD 0x06
340 #define I2O_SCSI_PORT_CONN_UNSHIELDED_A_LD 0x07
341 #define I2O_SCSI_PORT_CONN_SHIELDED_P_HD 0x08
342 #define I2O_SCSI_PORT_CONN_UNSHIELDED_P_HD 0x09
343 #define I2O_SCSI_PORT_CONN_SCA_I 0x0A
344 #define I2O_SCSI_PORT_CONN_SCA_II 0x0B
345 #define I2O_SCSI_PORT_CONN_FC_DB9 0x0C
346 #define I2O_SCSI_PORT_CONN_FC_FIBRE 0x0D
347 #define I2O_SCSI_PORT_CONN_FC_SCA_II_40 0x0E
348 #define I2O_SCSI_PORT_CONN_FC_SCA_II_20 0x0F
349 #define I2O_SCSI_PORT_CONN_FC_BNC 0x10
350
351 /* Connector Gender */
352
353 #define I2O_SCSI_PORT_CONN_GENDER_OTHER 0x01
354 #define I2O_SCSI_PORT_CONN_GENDER_UNKOWN 0x02
355 #define I2O_SCSI_PORT_CONN_GENDER_FEMALE 0x03
356 #define I2O_SCSI_PORT_CONN_GENDER_MALE 0x04
357
358
359 /* SCSI Device Group 0000h - Device Information Parameter Group */
360
361 typedef struct _I2O_SCSI_DEVICE_INFO_SCALAR {
362 U8 DeviceType;
363 U8 Flags;
364 U16 Reserved2;
365 U32 Identifier;
366 U8 LunInfo[8]; /* SCSI-2 8-bit scalar LUN goes into offset 1 */
367 U32 QueueDepth;
368 U8 Reserved1a;
369 U8 NegOffset;
370 U8 NegDataWidth;
371 U8 Reserved1b;
372 U64 NegSyncRate;
373
374 } I2O_SCSI_DEVICE_INFO_SCALAR, *PI2O_SCSI_DEVICE_INFO_SCALAR;
375
376
377 /* SCSI Device Group 0001h - Bus Port Information Parameter Group */
378
379 typedef struct _I2O_SCSI_BUS_PORT_INFO_SCALAR {
380 U8 PhysicalInterface;
381 U8 ElectricalInterface;
382 U8 Isochronous;
383 U8 ConnectorType;
384 U8 ConnectorGender;
385 U8 Reserved1;
386 U16 Reserved2;
387 U32 MaxNumberDevices;
388 } I2O_SCSI_BUS_PORT_INFO_SCALAR, *PI2O_SCSI_BUS_PORT_INFO_SCALAR;
389
390
391
392 /****************************************************************************/
393
394 /* I2O SCSI Peripheral Event Indicator Assignment */
395
396 #define I2O_SCSI_EVENT_SCSI_SMART 0x00000010
397
398
399 /****************************************************************************/
400
401 /* SCSI Peripheral Class Specific Message Definitions */
402
403 /****************************************************************************/
404
405
406 /****************************************************************************/
407
408 /* I2O SCSI Peripheral Successful Completion Reply Message Frame */
409
410 typedef struct _I2O_SCSI_SUCCESS_REPLY_MESSAGE_FRAME {
411 I2O_SINGLE_REPLY_MESSAGE_FRAME StdReplyFrame;
412 U32 TransferCount;
413 } I2O_SCSI_SUCCESS_REPLY_MESSAGE_FRAME, *PI2O_SCSI_SUCCESS_REPLY_MESSAGE_FRAME;
414
415
416 /****************************************************************************/
417
418 /* I2O SCSI Peripheral Error Report Reply Message Frame */
419
420 #ifdef _WIN64
421 #define I2O_SCSI_SENSE_DATA_SZ 44
422 #else
423 #define I2O_SCSI_SENSE_DATA_SZ 40
424 #endif
425
426 typedef struct _I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME {
427 I2O_SINGLE_REPLY_MESSAGE_FRAME StdReplyFrame;
428 U32 TransferCount;
429 U32 AutoSenseTransferCount;
430 U8 SenseData[I2O_SCSI_SENSE_DATA_SZ];
431 } I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME, *PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME;
432
433
434 /****************************************************************************/
435
436 /* I2O SCSI Device Reset Message Frame */
437
438 typedef struct _I2O_SCSI_DEVICE_RESET_MESSAGE {
439 I2O_MESSAGE_FRAME StdMessageFrame;
440 I2O_TRANSACTION_CONTEXT TransactionContext;
441 } I2O_SCSI_DEVICE_RESET_MESSAGE, *PI2O_SCSI_DEVICE_RESET_MESSAGE;
442
443
444 /****************************************************************************/
445
446 /* I2O SCSI Control Block Abort Message Frame */
447
448 typedef struct _I2O_SCSI_SCB_ABORT_MESSAGE {
449 I2O_MESSAGE_FRAME StdMessageFrame;
450 I2O_TRANSACTION_CONTEXT TransactionContext;
451 I2O_TRANSACTION_CONTEXT TransactionContextToAbort;
452 } I2O_SCSI_SCB_ABORT_MESSAGE, *PI2O_SCSI_SCB_ABORT_MESSAGE;
453
454
455 /****************************************************************************/
456
457 /* I2O SCSI Control Block Execute Message Frame */
458
459 #define I2O_SCSI_CDB_LENGTH 16
460
461 typedef U16 I2O_SCB_FLAGS;
462
463 #define I2O_SCB_FLAG_XFER_DIR_MASK 0xC000
464 #define I2O_SCB_FLAG_NO_DATA_XFER 0x0000
465 #define I2O_SCB_FLAG_XFER_FROM_DEVICE 0x4000
466 #define I2O_SCB_FLAG_XFER_TO_DEVICE 0x8000
467
468 #define I2O_SCB_FLAG_ENABLE_DISCONNECT 0x2000
469
470 #define I2O_SCB_FLAG_TAG_TYPE_MASK 0x0380
471 #define I2O_SCB_FLAG_NO_TAG_QUEUEING 0x0000
472 #define I2O_SCB_FLAG_SIMPLE_QUEUE_TAG 0x0080
473 #define I2O_SCB_FLAG_HEAD_QUEUE_TAG 0x0100
474 #define I2O_SCB_FLAG_ORDERED_QUEUE_TAG 0x0180
475 #define I2O_SCB_FLAG_ACA_QUEUE_TAG 0x0200
476
477 #define I2O_SCB_FLAG_AUTOSENSE_MASK 0x0060
478 #define I2O_SCB_FLAG_DISABLE_AUTOSENSE 0x0000
479 #define I2O_SCB_FLAG_SENSE_DATA_IN_MESSAGE 0x0020
480 #define I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER 0x0060
481
482 typedef struct _I2O_SCSI_SCB_EXECUTE_MESSAGE {
483 I2O_MESSAGE_FRAME StdMessageFrame;
484 I2O_TRANSACTION_CONTEXT TransactionContext;
485 U8 CDBLength;
486 U8 Reserved;
487 I2O_SCB_FLAGS SCBFlags;
488 U8 CDB[I2O_SCSI_CDB_LENGTH];
489 U32 ByteCount;
490 I2O_SG_ELEMENT SGL;
491 } I2O_SCSI_SCB_EXECUTE_MESSAGE, *PI2O_SCSI_SCB_EXECUTE_MESSAGE;
492
493
494 PRAGMA_PACK_POP
495
496 PRAGMA_ALIGN_POP
497
498 #endif /* I2O_BASE_SCSI_HDR */
Cache object: f6f5ea0bd3d84bb3760940489f46aa2a
|