1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD AND BSD-3-Clause
3 *
4 * Copyright 2008 by Marco Trillo. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
20 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
21 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
22 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
23 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 *
27 * $FreeBSD$
28 */
29 /*-
30 * Copyright (c) 2002, 2003 Tsubai Masanari. All rights reserved.
31 *
32 * Redistribution and use in source and binary forms, with or without
33 * modification, are permitted provided that the following conditions
34 * are met:
35 * 1. Redistributions of source code must retain the above copyright
36 * notice, this list of conditions and the following disclaimer.
37 * 2. Redistributions in binary form must reproduce the above copyright
38 * notice, this list of conditions and the following disclaimer in the
39 * documentation and/or other materials provided with the distribution.
40 * 3. The name of the author may not be used to endorse or promote products
41 * derived from this software without specific prior written permission.
42 *
43 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
44 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
45 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
46 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
47 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
48 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
49 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
50 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
51 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
52 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
53 *
54 * NetBSD: snapper.c,v 1.28 2008/05/16 03:49:54 macallan Exp
55 * Id: snapper.c,v 1.11 2002/10/31 17:42:13 tsubai Exp
56 */
57
58 /*
59 * Apple I2S audio controller.
60 */
61
62 #include <sys/param.h>
63 #include <sys/systm.h>
64 #include <sys/kernel.h>
65 #include <sys/module.h>
66 #include <sys/bus.h>
67 #include <sys/malloc.h>
68 #include <sys/lock.h>
69 #include <sys/mutex.h>
70 #include <machine/dbdma.h>
71 #include <machine/intr_machdep.h>
72 #include <machine/resource.h>
73 #include <machine/bus.h>
74 #include <machine/pio.h>
75 #include <sys/rman.h>
76 #include <dev/ofw/ofw_bus.h>
77
78 #ifdef HAVE_KERNEL_OPTION_HEADERS
79 #include "opt_snd.h"
80 #endif
81
82 #include <dev/sound/pcm/sound.h>
83 #include <dev/sound/macio/aoa.h>
84
85 #include <powerpc/powermac/macgpiovar.h>
86
87 struct i2s_softc {
88 struct aoa_softc aoa;
89 phandle_t node;
90 phandle_t soundnode;
91 struct resource *reg;
92 u_int output_mask;
93 struct mtx port_mtx;
94 };
95
96 static int i2s_probe(device_t);
97 static int i2s_attach(device_t);
98 static void i2s_postattach(void *);
99 static int i2s_setup(struct i2s_softc *, u_int, u_int, u_int);
100 static void i2s_mute_headphone (struct i2s_softc *, int);
101 static void i2s_mute_lineout (struct i2s_softc *, int);
102 static void i2s_mute_speaker (struct i2s_softc *, int);
103 static void i2s_set_outputs(void *, u_int);
104
105 static struct intr_config_hook *i2s_delayed_attach = NULL;
106
107 kobj_class_t i2s_mixer_class = NULL;
108 device_t i2s_mixer = NULL;
109
110 static device_method_t pcm_i2s_methods[] = {
111 /* Device interface. */
112 DEVMETHOD(device_probe, i2s_probe),
113 DEVMETHOD(device_attach, i2s_attach),
114 { 0, 0 }
115 };
116
117 static driver_t pcm_i2s_driver = {
118 "pcm",
119 pcm_i2s_methods,
120 PCM_SOFTC_SIZE
121 };
122
123 DRIVER_MODULE(pcm_i2s, macio, pcm_i2s_driver, 0, 0);
124 MODULE_DEPEND(pcm_i2s, sound, SOUND_MINVER, SOUND_PREFVER, SOUND_MAXVER);
125
126 static int aoagpio_probe(device_t);
127 static int aoagpio_attach(device_t);
128
129 static device_method_t aoagpio_methods[] = {
130 /* Device interface. */
131 DEVMETHOD(device_probe, aoagpio_probe),
132 DEVMETHOD(device_attach, aoagpio_attach),
133 { 0, 0 }
134 };
135
136 struct aoagpio_softc {
137 device_t dev;
138 int ctrl;
139 int detect_active; /* for extint-gpio */
140 int level; /* for extint-gpio */
141 struct i2s_softc *i2s; /* for extint-gpio */
142 };
143
144 static driver_t aoagpio_driver = {
145 "aoagpio",
146 aoagpio_methods,
147 sizeof(struct aoagpio_softc)
148 };
149
150 DRIVER_MODULE(aoagpio, macgpio, aoagpio_driver, 0, 0);
151
152 /*****************************************************************************
153 Probe and attachment routines.
154 *****************************************************************************/
155 static int
156 i2s_probe(device_t self)
157 {
158 const char *name;
159 phandle_t subchild;
160 char subchildname[255];
161
162 name = ofw_bus_get_name(self);
163 if (!name)
164 return (ENXIO);
165
166 if (strcmp(name, "i2s") != 0)
167 return (ENXIO);
168
169 /*
170 * Do not attach to "lightshow" I2S devices on Xserves. This controller
171 * is used there to control the LEDs on the front panel, and this
172 * driver can't handle it.
173 */
174 subchild = OF_child(OF_child(ofw_bus_get_node(self)));
175 if (subchild != 0 && OF_getprop(subchild, "name", subchildname,
176 sizeof(subchildname)) > 0 && strcmp(subchildname, "lightshow") == 0)
177 return (ENXIO);
178
179 device_set_desc(self, "Apple I2S Audio Controller");
180
181 return (0);
182 }
183
184 static phandle_t of_find_firstchild_byname(phandle_t, const char *);
185
186 static int
187 i2s_attach(device_t self)
188 {
189 struct i2s_softc *sc;
190 struct resource *dbdma_irq;
191 void *dbdma_ih;
192 int rid, oirq, err;
193 phandle_t port;
194
195 sc = malloc(sizeof(*sc), M_DEVBUF, M_WAITOK | M_ZERO);
196
197 sc->aoa.sc_dev = self;
198 sc->node = ofw_bus_get_node(self);
199
200 port = of_find_firstchild_byname(sc->node, "i2s-a");
201 if (port == -1)
202 return (ENXIO);
203 sc->soundnode = of_find_firstchild_byname(port, "sound");
204 if (sc->soundnode == -1)
205 return (ENXIO);
206
207 mtx_init(&sc->port_mtx, "port_mtx", NULL, MTX_DEF);
208
209 /* Map the controller register space. */
210 rid = 0;
211 sc->reg = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, RF_ACTIVE);
212 if (sc->reg == NULL)
213 return ENXIO;
214
215 /* Map the DBDMA channel register space. */
216 rid = 1;
217 sc->aoa.sc_odma = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid,
218 RF_ACTIVE);
219 if (sc->aoa.sc_odma == NULL)
220 return ENXIO;
221
222 /* Establish the DBDMA channel edge-triggered interrupt. */
223 rid = 1;
224 dbdma_irq = bus_alloc_resource_any(self, SYS_RES_IRQ,
225 &rid, RF_SHAREABLE | RF_ACTIVE);
226 if (dbdma_irq == NULL)
227 return (ENXIO);
228
229 /* Now initialize the controller. */
230 err = i2s_setup(sc, 44100, 16, 64);
231 if (err != 0)
232 return (err);
233
234 snd_setup_intr(self, dbdma_irq, INTR_MPSAFE, aoa_interrupt,
235 sc, &dbdma_ih);
236
237 oirq = rman_get_start(dbdma_irq);
238 err = powerpc_config_intr(oirq, INTR_TRIGGER_EDGE, INTR_POLARITY_LOW);
239 if (err != 0)
240 return (err);
241
242 /*
243 * Register a hook for delayed attach in order to allow
244 * the I2C controller to attach.
245 */
246 if ((i2s_delayed_attach = malloc(sizeof(struct intr_config_hook),
247 M_TEMP, M_WAITOK | M_ZERO)) == NULL)
248 return (ENOMEM);
249
250 i2s_delayed_attach->ich_func = i2s_postattach;
251 i2s_delayed_attach->ich_arg = sc;
252
253 if (config_intrhook_establish(i2s_delayed_attach) != 0)
254 return (ENOMEM);
255
256 return (aoa_attach(sc));
257 }
258
259 /*****************************************************************************
260 GPIO routines.
261 *****************************************************************************/
262
263 enum gpio_ctrl {
264 AMP_MUTE,
265 HEADPHONE_MUTE,
266 LINEOUT_MUTE,
267 AUDIO_HW_RESET,
268 HEADPHONE_DETECT,
269 LINEOUT_DETECT,
270 GPIO_CTRL_NUM
271 };
272
273 #define GPIO_CTRL_EXTINT_SET \
274 ((1 << HEADPHONE_DETECT) | \
275 (1 << LINEOUT_DETECT))
276
277 static struct aoagpio_softc *gpio_ctrls[GPIO_CTRL_NUM] =
278 {NULL, NULL, NULL, NULL, NULL, NULL};
279
280 static struct gpio_match {
281 const char *name;
282 enum gpio_ctrl ctrl;
283 } gpio_controls[] = {
284 {"headphone-mute", HEADPHONE_MUTE},
285 {"lineout-mute", LINEOUT_MUTE},
286 {"amp-mute", AMP_MUTE},
287 {"headphone-detect", HEADPHONE_DETECT},
288 {"lineout-detect", LINEOUT_DETECT},
289 {"line-output-detect", LINEOUT_DETECT},
290 {"audio-hw-reset", AUDIO_HW_RESET},
291 {"hw-reset", AUDIO_HW_RESET},
292 {NULL, GPIO_CTRL_NUM}
293 };
294
295 static void i2s_cint(struct i2s_softc *);
296
297 static void
298 aoagpio_int(void *cookie)
299 {
300 device_t self = cookie;
301 struct aoagpio_softc *sc;
302
303 sc = device_get_softc(self);
304
305 if (macgpio_read(self) & GPIO_LEVEL_RO)
306 sc->level = sc->detect_active;
307 else
308 sc->level = !(sc->detect_active);
309
310 if (sc->i2s)
311 i2s_cint(sc->i2s);
312 }
313
314 static int
315 aoagpio_probe(device_t gpio)
316 {
317 phandle_t node;
318 char bname[32];
319 const char *name;
320 struct gpio_match *m;
321 struct aoagpio_softc *sc;
322
323 node = ofw_bus_get_node(gpio);
324 if (node == 0 || node == -1)
325 return (EINVAL);
326
327 bzero(bname, sizeof(bname));
328 if (OF_getprop(node, "audio-gpio", bname, sizeof(bname)) > 2)
329 name = bname;
330 else
331 name = ofw_bus_get_name(gpio);
332
333 /* Try to find a match. */
334 for (m = gpio_controls; m->name != NULL; m++) {
335 if (strcmp(name, m->name) == 0) {
336 sc = device_get_softc(gpio);
337 gpio_ctrls[m->ctrl] = sc;
338 sc->dev = gpio;
339 sc->ctrl = m->ctrl;
340 sc->level = 0;
341 sc->detect_active = 0;
342 sc->i2s = NULL;
343
344 OF_getprop(node, "audio-gpio-active-state",
345 &sc->detect_active, sizeof(sc->detect_active));
346
347 if ((1 << m->ctrl) & GPIO_CTRL_EXTINT_SET)
348 aoagpio_int(gpio);
349
350 device_set_desc(gpio, m->name);
351 device_quiet(gpio);
352 return (0);
353 }
354 }
355
356 return (ENXIO);
357 }
358
359 static int
360 aoagpio_attach(device_t gpio)
361 {
362 struct aoagpio_softc *sc;
363 struct resource *r;
364 void *cookie;
365 int irq, rid = 0;
366
367 sc = device_get_softc(gpio);
368
369 if ((1 << sc->ctrl) & GPIO_CTRL_EXTINT_SET) {
370 r = bus_alloc_resource_any(gpio, SYS_RES_IRQ, &rid, RF_ACTIVE);
371 if (r == NULL)
372 return (ENXIO);
373
374 irq = rman_get_start(r);
375 DPRINTF(("interrupting at irq %d\n", irq));
376
377 if (powerpc_config_intr(irq, INTR_TRIGGER_EDGE,
378 INTR_POLARITY_LOW) != 0)
379 return (ENXIO);
380
381 bus_setup_intr(gpio, r, INTR_TYPE_MISC | INTR_MPSAFE |
382 INTR_ENTROPY, NULL, aoagpio_int, gpio, &cookie);
383 }
384
385 return (0);
386 }
387
388 /*
389 * I2S module registers
390 */
391 #define I2S_INT 0x00
392 #define I2S_FORMAT 0x10
393 #define I2S_FRAMECOUNT 0x40
394 #define I2S_FRAMEMATCH 0x50
395 #define I2S_WORDSIZE 0x60
396
397 /* I2S_INT register definitions */
398 #define I2S_INT_CLKSTOPPEND 0x01000000 /* clock-stop interrupt pending */
399
400 /* I2S_FORMAT register definitions */
401 #define CLKSRC_49MHz 0x80000000 /* Use 49152000Hz Osc. */
402 #define CLKSRC_45MHz 0x40000000 /* Use 45158400Hz Osc. */
403 #define CLKSRC_18MHz 0x00000000 /* Use 18432000Hz Osc. */
404 #define MCLK_DIV_MASK 0x1f000000 /* MCLK = SRC / DIV */
405 #define SCLK_DIV_MASK 0x00f00000 /* SCLK = MCLK / DIV */
406 #define SCLK_MASTER 0x00080000 /* Master mode */
407 #define SCLK_SLAVE 0x00000000 /* Slave mode */
408 #define SERIAL_FORMAT 0x00070000
409 #define SERIAL_SONY 0x00000000
410 #define SERIAL_64x 0x00010000
411 #define SERIAL_32x 0x00020000
412 #define SERIAL_DAV 0x00040000
413 #define SERIAL_SILICON 0x00050000
414
415 /* I2S_WORDSIZE register definitions */
416 #define INPUT_STEREO (2 << 24)
417 #define INPUT_MONO (1 << 24)
418 #define INPUT_16BIT (0 << 16)
419 #define INPUT_24BIT (3 << 16)
420 #define OUTPUT_STEREO (2 << 8)
421 #define OUTPUT_MONO (1 << 8)
422 #define OUTPUT_16BIT (0 << 0)
423 #define OUTPUT_24BIT (3 << 0)
424
425 /* Master clock, needed by some codecs. We hardcode this
426 to 256 * fs as this is valid for most codecs. */
427 #define MCLK_FS 256
428
429 /* Number of clock sources we can use. */
430 #define NCLKS 3
431 static const struct i2s_clksrc {
432 u_int cs_clock;
433 u_int cs_reg;
434 } clksrc[NCLKS] = {
435 {49152000, CLKSRC_49MHz},
436 {45158400, CLKSRC_45MHz},
437 {18432000, CLKSRC_18MHz}
438 };
439
440 /* Configure the I2S controller for the required settings.
441 'rate' is the frame rate.
442 'wordsize' is the sample size (usually 16 bits).
443 'sclk_fs' is the SCLK/framerate ratio, which needs to be equal
444 or greater to the number of bits per frame. */
445
446 static int
447 i2s_setup(struct i2s_softc *sc, u_int rate, u_int wordsize, u_int sclk_fs)
448 {
449 u_int mclk, mdiv, sdiv;
450 u_int reg = 0, x, wordformat;
451 u_int i;
452
453 /* Make sure the settings are consistent... */
454 if ((wordsize * 2) > sclk_fs)
455 return (EINVAL);
456
457 if (sclk_fs != 32 && sclk_fs != 64)
458 return (EINVAL);
459
460 /*
461 * Find a clock source to derive the master clock (MCLK)
462 * and the I2S bit block (SCLK) and set the divisors as
463 * appropriate.
464 */
465 mclk = rate * MCLK_FS;
466 sdiv = MCLK_FS / sclk_fs;
467
468 for (i = 0; i < NCLKS; ++i) {
469 if ((clksrc[i].cs_clock % mclk) == 0) {
470 reg = clksrc[i].cs_reg;
471 mdiv = clksrc[i].cs_clock / mclk;
472 break;
473 }
474 }
475 if (reg == 0)
476 return (EINVAL);
477
478 switch (mdiv) {
479 /* exception cases */
480 case 1:
481 x = 14;
482 break;
483 case 3:
484 x = 13;
485 break;
486 case 5:
487 x = 12;
488 break;
489 default:
490 x = (mdiv / 2) - 1;
491 break;
492 }
493 reg |= (x << 24) & MCLK_DIV_MASK;
494
495 switch (sdiv) {
496 case 1:
497 x = 8;
498 break;
499 case 3:
500 x = 9;
501 break;
502 default:
503 x = (sdiv / 2) - 1;
504 break;
505 }
506 reg |= (x << 20) & SCLK_DIV_MASK;
507
508 /*
509 * XXX use master mode for now. This needs to be
510 * revisited if we want to add recording from SPDIF some day.
511 */
512 reg |= SCLK_MASTER;
513
514 switch (sclk_fs) {
515 case 64:
516 reg |= SERIAL_64x;
517 break;
518 case 32:
519 reg |= SERIAL_32x;
520 break;
521 }
522
523 /* stereo input and output */
524 wordformat = INPUT_STEREO | OUTPUT_STEREO;
525
526 switch (wordsize) {
527 case 16:
528 wordformat |= INPUT_16BIT | OUTPUT_16BIT;
529 break;
530 case 24:
531 wordformat |= INPUT_24BIT | OUTPUT_24BIT;
532 break;
533 default:
534 return (EINVAL);
535 }
536
537 x = bus_read_4(sc->reg, I2S_WORDSIZE);
538 if (x != wordformat)
539 bus_write_4(sc->reg, I2S_WORDSIZE, wordformat);
540
541 x = bus_read_4(sc->reg, I2S_FORMAT);
542 if (x != reg) {
543 /*
544 * XXX to change the format we need to stop the clock
545 * via the FCR registers. For now, rely on the firmware
546 * to set sane defaults (44100).
547 */
548 printf("i2s_setup: changing format not supported yet.\n");
549 return (ENOTSUP);
550
551 #ifdef notyet
552 if (obio_fcr_isset(OBIO_FCR1, I2S0CLKEN)) {
553
554 bus_space_write_4(sc->sc_tag, sc->sc_bsh, I2S_INT,
555 I2S_INT_CLKSTOPPEND);
556
557 obio_fcr_clear(OBIO_FCR1, I2S0CLKEN);
558
559 for (timo = 1000; timo > 0; timo--) {
560 if (bus_space_read_4(sc->sc_tag, sc->sc_bsh,
561 I2S_INT) & I2S_INT_CLKSTOPPEND)
562 break;
563
564 DELAY(10);
565 }
566
567 if (timo == 0)
568 printf("%s: timeout waiting for clock to stop\n",
569 sc->sc_dev.dv_xname);
570 }
571
572 bus_space_write_4(sc->sc_tag, sc->sc_bsh, I2S_FORMAT, reg);
573
574 obio_fcr_set(OBIO_FCR1, I2S0CLKEN);
575 #endif
576 }
577
578 return (0);
579 }
580
581 /* XXX this does not belong here. */
582 static phandle_t
583 of_find_firstchild_byname(phandle_t node, const char *req_name)
584 {
585 char name[32]; /* max name len per OF spec. */
586 phandle_t n;
587
588 for (n = OF_child(node); n != -1; n = OF_peer(n)) {
589 bzero(name, sizeof(name));
590 OF_getprop(n, "name", name, sizeof(name));
591
592 if (strcmp(name, req_name) == 0)
593 return (n);
594 }
595
596 return (-1);
597 }
598
599 static u_int
600 gpio_read(enum gpio_ctrl ctrl)
601 {
602 struct aoagpio_softc *sc;
603
604 if ((sc = gpio_ctrls[ctrl]) == NULL)
605 return (0);
606
607 return (macgpio_read(sc->dev) & GPIO_DATA);
608 }
609
610 static void
611 gpio_write(enum gpio_ctrl ctrl, u_int x)
612 {
613 struct aoagpio_softc *sc;
614 u_int reg;
615
616 if ((sc = gpio_ctrls[ctrl]) == NULL)
617 return;
618
619 reg = GPIO_DDR_OUTPUT;
620 if (x)
621 reg |= GPIO_DATA;
622
623 macgpio_write(sc->dev, reg);
624 }
625
626 static void
627 i2s_cint(struct i2s_softc *sc)
628 {
629 u_int mask = 0;
630
631 if (gpio_ctrls[HEADPHONE_DETECT] &&
632 gpio_ctrls[HEADPHONE_DETECT]->level)
633 mask |= 1 << 1;
634
635 if (gpio_ctrls[LINEOUT_DETECT] &&
636 gpio_ctrls[LINEOUT_DETECT]->level)
637 mask |= 1 << 2;
638
639 if (mask == 0)
640 mask = 1 << 0; /* fall back to speakers. */
641
642 i2s_set_outputs(sc, mask);
643 }
644
645 #define reset_active 0
646
647 /* these values are in microseconds */
648 #define RESET_SETUP_TIME 5000
649 #define RESET_HOLD_TIME 20000
650 #define RESET_RELEASE_TIME 10000
651
652 static void
653 i2s_audio_hw_reset(struct i2s_softc *sc)
654 {
655 if (gpio_ctrls[AUDIO_HW_RESET]) {
656 DPRINTF(("resetting codec\n"));
657
658 gpio_write(AUDIO_HW_RESET, !reset_active); /* Negate RESET */
659 DELAY(RESET_SETUP_TIME);
660
661 gpio_write(AUDIO_HW_RESET, reset_active); /* Assert RESET */
662 DELAY(RESET_HOLD_TIME);
663
664 gpio_write(AUDIO_HW_RESET, !reset_active); /* Negate RESET */
665 DELAY(RESET_RELEASE_TIME);
666
667 } else {
668 DPRINTF(("no audio_hw_reset\n"));
669 }
670 }
671
672 #define AMP_ACTIVE 0 /* XXX OF */
673 #define HEADPHONE_ACTIVE 0 /* XXX OF */
674 #define LINEOUT_ACTIVE 0 /* XXX OF */
675
676 #define MUTE_CONTROL(xxx, yyy) \
677 static void \
678 i2s_mute_##xxx(struct i2s_softc *sc, int mute) \
679 { \
680 int x; \
681 \
682 if (gpio_ctrls[yyy##_MUTE] == NULL) \
683 return; \
684 if (mute) \
685 x = yyy##_ACTIVE; \
686 else \
687 x = ! yyy##_ACTIVE; \
688 \
689 if (x != gpio_read(yyy##_MUTE)) \
690 gpio_write(yyy##_MUTE, x); \
691 }
692
693 MUTE_CONTROL(speaker, AMP)
694 MUTE_CONTROL(headphone, HEADPHONE)
695 MUTE_CONTROL(lineout, LINEOUT)
696
697 static void
698 i2s_set_outputs(void *ptr, u_int mask)
699 {
700 struct i2s_softc *sc = ptr;
701
702 if (mask == sc->output_mask)
703 return;
704
705 mtx_lock(&sc->port_mtx);
706
707 i2s_mute_speaker(sc, 1);
708 i2s_mute_headphone(sc, 1);
709 i2s_mute_lineout(sc, 1);
710
711 DPRINTF(("enabled outputs: "));
712
713 if (mask & (1 << 0)) {
714 DPRINTF(("SPEAKER "));
715 i2s_mute_speaker(sc, 0);
716 }
717 if (mask & (1 << 1)) {
718 DPRINTF(("HEADPHONE "));
719 i2s_mute_headphone(sc, 0);
720 }
721 if (mask & (1 << 2)) {
722 DPRINTF(("LINEOUT "));
723 i2s_mute_lineout(sc, 0);
724 }
725
726 DPRINTF(("\n"));
727 sc->output_mask = mask;
728
729 mtx_unlock(&sc->port_mtx);
730 }
731
732 static void
733 i2s_postattach(void *xsc)
734 {
735 struct i2s_softc *sc = xsc;
736 device_t self;
737 int i;
738
739 self = sc->aoa.sc_dev;
740
741 /* Reset the codec. */
742 i2s_audio_hw_reset(sc);
743
744 /* If we have a codec, initialize it. */
745 if (i2s_mixer)
746 mixer_init(self, i2s_mixer_class, i2s_mixer);
747
748 /* Read initial port status. */
749 i2s_cint(sc);
750
751 /* Enable GPIO interrupt callback. */
752 for (i = 0; i < GPIO_CTRL_NUM; i++)
753 if (gpio_ctrls[i])
754 gpio_ctrls[i]->i2s = sc;
755
756 config_intrhook_disestablish(i2s_delayed_attach);
757 free(i2s_delayed_attach, M_TEMP);
758 }
Cache object: 70b780a8608099c32148eeb0dc20740d
|