FreeBSD/Linux Kernel Cross Reference
sys/dev/uart/uart_if.m

     #-
     # Copyright (c) 2003 Marcel Moolenaar
     # All rights reserved.
     #
     # Redistribution and use in source and binary forms, with or without
     # modification, are permitted provided that the following conditions
     # are met:
     #
     # 1. Redistributions of source code must retain the above copyright
    #    notice, this list of conditions and the following disclaimer.
    # 2. Redistributions in binary form must reproduce the above copyright
    #    notice, this list of conditions and the following disclaimer in the
    #    documentation and/or other materials provided with the distribution.
    #
    # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
    # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
    # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
    # IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
    # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
    # NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
    # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
    # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
    # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
    # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
    #
    # $FreeBSD: releng/8.4/sys/dev/uart/uart_if.m 139749 2005-01-06 01:43:34Z imp $
    
    #include <sys/param.h>
    #include <sys/lock.h>
    #include <sys/mutex.h>
    #include <sys/bus.h>
    #include <machine/bus.h>
    #include <dev/uart/uart.h>
    #include <dev/uart/uart_bus.h>
    
    # The UART hardware interface. The core UART code is hardware independent.
    # The details of the hardware are abstracted by the UART hardware interface.
    
    INTERFACE uart;
    
    # attach() - attach hardware.
    # This method is called when the device is being attached. All resources
    # have been allocated. The transmit and receive buffers exist, but no
    # high-level (ie tty) initialization has been done yet.
    # The intend of this method is to setup the hardware for normal operation.
    METHOD int attach {
            struct uart_softc *this;
    };
    
    # detach() - detach hardware.
    # This method is called when a device is being detached from its bus. It
    # is the first action performed, so even the high-level (ie tty) interface
    # is still operational.
    # The intend of this method is to disable the hardware.
    METHOD int detach {
            struct uart_softc *this;
    };
    
    # flush() - flush FIFOs.
    # This method is called to flush the transmitter and/or the receiver as
    # specified by the what argument. Characters are expected to be lost.
    METHOD int flush {
            struct uart_softc *this;
            int     what;
    };
    
    # getsig() - get line and modem signals.
    # This method retrieves the DTE and DCE signals and their corresponding
    # delta bits. The delta bits include those corresponding to DTE signals
    # when they were changed by a call to setsig. The delta bits maintained
    # by the hardware driver are cleared as a side-effect. A second call to
    # this function will not have any delta bits set, unless there was a
    # change in the signals in the mean time.
    METHOD int getsig {
            struct uart_softc *this;
    };
    
    # ioctl() - get or set miscellaneous parameters.
    # This method is the bitbucket method. It can (and will) be used when there's
    # something we need to set or get for which a new method is overkill. It's
    # used for example to set HW or SW flow-control.
    METHOD int ioctl {
            struct uart_softc *this;
            int request;
            intptr_t data;
    };
    
    # ipend() - query UART for pending interrupts.
    # When an interrupt is signalled, the handler will call this method to find
    # out which of the interrupt sources needs attention. The handler will use
    # this information to dispatch service routines that deal with each of the
    # interrupt sources. An advantage of this approach is that it allows multi-
    # port drivers (like puc(4)) to query multiple devices concurrently and
    # service them on an interrupt priority basis. If the hardware cannot provide
    # the information reliably, it is free to service the interrupt and return 0,
    # meaning that no attention is required.
    METHOD int ipend {
            struct uart_softc *this;
    }
   
   # param() - set communication parameters.
   # This method is called to change the communication parameters.
   METHOD int param {
           struct uart_softc *this;
           int     baudrate;
           int     databits;
           int     stopbits;
           int     parity;
   };
   
   # probe() - detect hardware.
   # This method is called as part of the bus probe to make sure the
   # hardware exists. This function should also set the device description
   # to something that represents the hardware.
   METHOD int probe {
           struct uart_softc *this;
   };
   
   # receive() - move data from the receive FIFO to the receive buffer.
   # This method is called to move received data to the receive buffer and
   # additionally should make sure the receive interrupt should be cleared.
   METHOD int receive {
           struct uart_softc *this;
   };
   
   # setsig() - set line and modem signals.
   # This method allows changing DTE signals. The DTE delta bits indicate which
   # signals are to be changed and the DTE bits themselves indicate whether to
   # set or clear the signals. A subsequent call to getsig will return with the
   # DTE delta bits set of those DTE signals that did change by this method.
   METHOD int setsig {
           struct uart_softc *this;
           int     sig;
   };
   
   # transmit() - move data from the transmit buffer to the transmit FIFO.
   # This method is responsible for writing the Tx buffer to the UART and
   # additionally should make sure that a transmit interrupt is generated
   # when transmission is complete.
   METHOD int transmit {
           struct uart_softc *this;
   };

Cache object: 3e556ba09d24508f1fa36dbcff2df57b