FreeBSD/Linux Kernel Cross Reference
sys/dev/usb/controller/xhcireg.h

     /* $FreeBSD$ */
     
     /*-
      * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
      *
      * Copyright (c) 2010 Hans Petter Selasky. All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     */
    
    #ifndef _XHCIREG_H_
    #define _XHCIREG_H_
    
    /* XHCI PCI config registers */
    #define PCI_XHCI_CBMEM          0x10    /* configuration base MEM */
    #define PCI_XHCI_USBREV         0x60    /* RO USB protocol revision */
    #define PCI_USB_REV_3_0         0x30    /* USB 3.0 */
    #define PCI_XHCI_FLADJ          0x61    /* RW frame length adjust */
    
    #define PCI_XHCI_INTEL_XUSB2PR  0xD0    /* Intel USB2 Port Routing */
    #define PCI_XHCI_INTEL_USB2PRM  0xD4    /* Intel USB2 Port Routing Mask */
    #define PCI_XHCI_INTEL_USB3_PSSEN 0xD8  /* Intel USB3 Port SuperSpeed Enable */
    #define PCI_XHCI_INTEL_USB3PRM  0xDC    /* Intel USB3 Port Routing Mask */
    
    /* XHCI capability registers */
    #define XHCI_CAPLENGTH          0x00    /* RO capability */
    #define XHCI_RESERVED           0x01    /* Reserved */
    #define XHCI_HCIVERSION         0x02    /* RO Interface version number */
    #define XHCI_HCIVERSION_0_9     0x0090  /* xHCI version 0.9 */
    #define XHCI_HCIVERSION_1_0     0x0100  /* xHCI version 1.0 */
    #define XHCI_HCSPARAMS1         0x04    /* RO structural parameters 1 */
    #define XHCI_HCS1_DEVSLOT_MAX(x)((x) & 0xFF)
    #define XHCI_HCS1_IRQ_MAX(x)    (((x) >> 8) & 0x3FF)
    #define XHCI_HCS1_N_PORTS(x)    (((x) >> 24) & 0xFF)
    #define XHCI_HCSPARAMS2         0x08    /* RO structural parameters 2 */
    #define XHCI_HCS2_IST(x)        ((x) & 0xF)
    #define XHCI_HCS2_ERST_MAX(x)   (((x) >> 4) & 0xF)
    #define XHCI_HCS2_SPR(x)        (((x) >> 26) & 0x1)
    #define XHCI_HCS2_SPB_MAX(x)    ((((x) >> 16) & 0x3E0) | (((x) >> 27) & 0x1F))
    #define XHCI_HCSPARAMS3         0x0C    /* RO structural parameters 3 */
    #define XHCI_HCS3_U1_DEL(x)     ((x) & 0xFF)
    #define XHCI_HCS3_U2_DEL(x)     (((x) >> 16) & 0xFFFF)
    #define XHCI_HCSPARAMS0         0x10    /* RO capability parameters */
    #define XHCI_HCS0_AC64(x)       ((x) & 0x1)             /* 64-bit capable */
    #define XHCI_HCS0_BNC(x)        (((x) >> 1) & 0x1)      /* BW negotiation */
    #define XHCI_HCS0_CSZ(x)        (((x) >> 2) & 0x1)      /* context size */
    #define XHCI_HCS0_PPC(x)        (((x) >> 3) & 0x1)      /* port power control */
    #define XHCI_HCS0_PIND(x)       (((x) >> 4) & 0x1)      /* port indicators */
    #define XHCI_HCS0_LHRC(x)       (((x) >> 5) & 0x1)      /* light HC reset */
    #define XHCI_HCS0_LTC(x)        (((x) >> 6) & 0x1)      /* latency tolerance msg */
    #define XHCI_HCS0_NSS(x)        (((x) >> 7) & 0x1)      /* no secondary sid */
    #define XHCI_HCS0_PSA_SZ_MAX(x) (((x) >> 12) & 0xF)     /* max pri. stream array size */
    #define XHCI_HCS0_XECP(x)       (((x) >> 16) & 0xFFFF)  /* extended capabilities pointer */
    #define XHCI_DBOFF              0x14    /* RO doorbell offset */
    #define XHCI_RTSOFF             0x18    /* RO runtime register space offset */
    
    /* XHCI operational registers.  Offset given by XHCI_CAPLENGTH register */
    #define XHCI_USBCMD             0x00    /* XHCI command */
    #define XHCI_CMD_RS             0x00000001      /* RW Run/Stop */
    #define XHCI_CMD_HCRST          0x00000002      /* RW Host Controller Reset */
    #define XHCI_CMD_INTE           0x00000004      /* RW Interrupter Enable */
    #define XHCI_CMD_HSEE           0x00000008      /* RW Host System Error Enable */
    #define XHCI_CMD_LHCRST         0x00000080      /* RO/RW Light Host Controller Reset */
    #define XHCI_CMD_CSS            0x00000100      /* RW Controller Save State */
    #define XHCI_CMD_CRS            0x00000200      /* RW Controller Restore State */
    #define XHCI_CMD_EWE            0x00000400      /* RW Enable Wrap Event */
    #define XHCI_CMD_EU3S           0x00000800      /* RW Enable U3 MFINDEX Stop */
    #define XHCI_USBSTS             0x04    /* XHCI status */
    #define XHCI_STS_HCH            0x00000001      /* RO - Host Controller Halted */
    #define XHCI_STS_HSE            0x00000004      /* RW - Host System Error */
    #define XHCI_STS_EINT           0x00000008      /* RW - Event Interrupt */
    #define XHCI_STS_PCD            0x00000010      /* RW - Port Change Detect */
    #define XHCI_STS_SSS            0x00000100      /* RO - Save State Status */
    #define XHCI_STS_RSS            0x00000200      /* RO - Restore State Status */
    #define XHCI_STS_SRE            0x00000400      /* RW - Save/Restore Error */
    #define XHCI_STS_CNR            0x00000800      /* RO - Controller Not Ready */
    #define XHCI_STS_HCE            0x00001000      /* RO - Host Controller Error */
    #define XHCI_PAGESIZE           0x08    /* XHCI page size mask */
    #define XHCI_PAGESIZE_4K        0x00000001      /* 4K Page Size */
    #define XHCI_PAGESIZE_8K        0x00000002      /* 8K Page Size */
   #define XHCI_PAGESIZE_16K       0x00000004      /* 16K Page Size */
   #define XHCI_PAGESIZE_32K       0x00000008      /* 32K Page Size */
   #define XHCI_PAGESIZE_64K       0x00000010      /* 64K Page Size */
   #define XHCI_DNCTRL             0x14    /* XHCI device notification control */
   #define XHCI_DNCTRL_MASK(n)     (1U << (n))
   #define XHCI_CRCR_LO            0x18    /* XHCI command ring control */
   #define XHCI_CRCR_LO_RCS        0x00000001      /* RW - consumer cycle state */
   #define XHCI_CRCR_LO_CS         0x00000002      /* RW - command stop */
   #define XHCI_CRCR_LO_CA         0x00000004      /* RW - command abort */
   #define XHCI_CRCR_LO_CRR        0x00000008      /* RW - command ring running */
   #define XHCI_CRCR_LO_MASK       0x0000000F
   #define XHCI_CRCR_HI            0x1C    /* XHCI command ring control */
   #define XHCI_DCBAAP_LO          0x30    /* XHCI dev context BA pointer */
   #define XHCI_DCBAAP_HI          0x34    /* XHCI dev context BA pointer */
   #define XHCI_CONFIG             0x38
   #define XHCI_CONFIG_SLOTS_MASK  0x000000FF      /* RW - number of device slots enabled */
   
   /* XHCI port status registers */
   #define XHCI_PORTSC(n)          (0x3F0 + (0x10 * (n)))  /* XHCI port status */
   #define XHCI_PS_CCS             0x00000001      /* RO - current connect status */
   #define XHCI_PS_PED             0x00000002      /* RW - port enabled / disabled */
   #define XHCI_PS_OCA             0x00000008      /* RO - over current active */
   #define XHCI_PS_PR              0x00000010      /* RW - port reset */
   #define XHCI_PS_PLS_GET(x)      (((x) >> 5) & 0xF)      /* RW - port link state */
   #define XHCI_PS_PLS_SET(x)      (((x) & 0xF) << 5)      /* RW - port link state */
   #define XHCI_PS_PP              0x00000200      /* RW - port power */
   #define XHCI_PS_SPEED_GET(x)    (((x) >> 10) & 0xF)     /* RO - port speed */
   #define XHCI_PS_SPEED_FULL      0x1                     /* Full Speed USB */
   #define XHCI_PS_SPEED_LOW       0x2                     /* Low Speed USB */
   #define XHCI_PS_SPEED_HIGH      0x3                     /* High Speed USB */
   #define XHCI_PS_SPEED_SS        0x4                     /* Super Speed USB */
   #define XHCI_PS_PIC_GET(x)      (((x) >> 14) & 0x3)     /* RW - port indicator */
   #define XHCI_PS_PIC_SET(x)      (((x) & 0x3) << 14)     /* RW - port indicator */
   #define XHCI_PS_LWS             0x00010000      /* RW - port link state write strobe */
   #define XHCI_PS_CSC             0x00020000      /* RW - connect status change */
   #define XHCI_PS_PEC             0x00040000      /* RW - port enable/disable change */
   #define XHCI_PS_WRC             0x00080000      /* RW - warm port reset change */
   #define XHCI_PS_OCC             0x00100000      /* RW - over-current change */
   #define XHCI_PS_PRC             0x00200000      /* RW - port reset change */
   #define XHCI_PS_PLC             0x00400000      /* RW - port link state change */
   #define XHCI_PS_CEC             0x00800000      /* RW - config error change */
   #define XHCI_PS_CAS             0x01000000      /* RO - cold attach status */
   #define XHCI_PS_WCE             0x02000000      /* RW - wake on connect enable */
   #define XHCI_PS_WDE             0x04000000      /* RW - wake on disconnect enable */
   #define XHCI_PS_WOE             0x08000000      /* RW - wake on over-current enable */
   #define XHCI_PS_DR              0x40000000      /* RO - device removable */
   #define XHCI_PS_WPR             0x80000000U     /* RW - warm port reset */
   #define XHCI_PS_CLEAR           0x80FF01FFU     /* command bits */
   
   #define XHCI_PORTPMSC(n)        (0x3F4 + (0x10 * (n)))  /* XHCI status and control */
   #define XHCI_PM3_U1TO_GET(x)    (((x) >> 0) & 0xFF)     /* RW - U1 timeout */
   #define XHCI_PM3_U1TO_SET(x)    (((x) & 0xFF) << 0)     /* RW - U1 timeout */
   #define XHCI_PM3_U2TO_GET(x)    (((x) >> 8) & 0xFF)     /* RW - U2 timeout */
   #define XHCI_PM3_U2TO_SET(x)    (((x) & 0xFF) << 8)     /* RW - U2 timeout */
   #define XHCI_PM3_FLA            0x00010000      /* RW - Force Link PM Accept */
   #define XHCI_PM2_L1S_GET(x)     (((x) >> 0) & 0x7)      /* RO - L1 status */
   #define XHCI_PM2_RWE            0x00000008              /* RW - remote wakup enable */
   #define XHCI_PM2_HIRD_GET(x)    (((x) >> 4) & 0xF)      /* RW - host initiated resume duration */
   #define XHCI_PM2_HIRD_SET(x)    (((x) & 0xF) << 4)      /* RW - host initiated resume duration */
   #define XHCI_PM2_L1SLOT_GET(x)  (((x) >> 8) & 0xFF)     /* RW - L1 device slot */
   #define XHCI_PM2_L1SLOT_SET(x)  (((x) & 0xFF) << 8)     /* RW - L1 device slot */
   #define XHCI_PM2_HLE            0x00010000              /* RW - hardware LPM enable */
   #define XHCI_PORTLI(n)          (0x3F8 + (0x10 * (n)))  /* XHCI port link info */
   #define XHCI_PLI3_ERR_GET(x)    (((x) >> 0) & 0xFFFF)   /* RO - port link errors */
   #define XHCI_PORTRSV(n)         (0x3FC + (0x10 * (n)))  /* XHCI port reserved */
   
   /* XHCI runtime registers.  Offset given by XHCI_CAPLENGTH + XHCI_RTSOFF registers */
   #define XHCI_MFINDEX            0x0000          /* RO - microframe index */
   #define XHCI_MFINDEX_GET(x)     ((x) & 0x3FFF)
   #define XHCI_IMAN(n)            (0x0020 + (0x20 * (n))) /* XHCI interrupt management */
   #define XHCI_IMAN_INTR_PEND     0x00000001      /* RW - interrupt pending */
   #define XHCI_IMAN_INTR_ENA      0x00000002      /* RW - interrupt enable */
   #define XHCI_IMOD(n)            (0x0024 + (0x20 * (n))) /* XHCI interrupt moderation */
   #define XHCI_IMOD_IVAL_GET(x)   (((x) >> 0) & 0xFFFF)   /* 250ns unit */
   #define XHCI_IMOD_IVAL_SET(x)   (((x) & 0xFFFF) << 0)   /* 250ns unit */
   #define XHCI_IMOD_ICNT_GET(x)   (((x) >> 16) & 0xFFFF)  /* 250ns unit */
   #define XHCI_IMOD_ICNT_SET(x)   (((x) & 0xFFFF) << 16)  /* 250ns unit */
   #define XHCI_IMOD_DEFAULT       0x000001F4U     /* 8000 IRQs/second */
   #define XHCI_IMOD_DEFAULT_LP    0x000003F8U     /* 4000 IRQs/second - LynxPoint */
   #define XHCI_ERSTSZ(n)          (0x0028 + (0x20 * (n))) /* XHCI event ring segment table size */
   #define XHCI_ERSTS_GET(x)       ((x) & 0xFFFF)
   #define XHCI_ERSTS_SET(x)       ((x) & 0xFFFF)
   #define XHCI_ERSTBA_LO(n)       (0x0030 + (0x20 * (n))) /* XHCI event ring segment table BA */
   #define XHCI_ERSTBA_HI(n)       (0x0034 + (0x20 * (n))) /* XHCI event ring segment table BA */
   #define XHCI_ERDP_LO(n) (0x0038 + (0x20 * (n))) /* XHCI event ring dequeue pointer */
   #define XHCI_ERDP_LO_SINDEX(x)  ((x) & 0x7)     /* RO - dequeue segment index */
   #define XHCI_ERDP_LO_BUSY       0x00000008      /* RW - event handler busy */
   #define XHCI_ERDP_HI(n) (0x003C + (0x20 * (n))) /* XHCI event ring dequeue pointer */
   
   /* XHCI doorbell registers. Offset given by XHCI_CAPLENGTH + XHCI_DBOFF registers */
   #define XHCI_DOORBELL(n)        (0x0000 + (4 * (n)))
   #define XHCI_DB_TARGET_GET(x)   ((x) & 0xFF)            /* RW - doorbell target */
   #define XHCI_DB_TARGET_SET(x)   ((x) & 0xFF)            /* RW - doorbell target */
   #define XHCI_DB_SID_GET(x)      (((x) >> 16) & 0xFFFF)  /* RW - doorbell stream ID */
   #define XHCI_DB_SID_SET(x)      (((x) & 0xFFFF) << 16)  /* RW - doorbell stream ID */
   
   /* XHCI legacy support */
   #define XHCI_XECP_ID(x)         ((x) & 0xFF)
   #define XHCI_XECP_NEXT(x)       (((x) >> 8) & 0xFF)
   #define XHCI_XECP_BIOS_SEM      0x0002
   #define XHCI_XECP_OS_SEM        0x0003
   
   /* XHCI capability ID's */
   #define XHCI_ID_USB_LEGACY      0x0001
   #define XHCI_ID_PROTOCOLS       0x0002
   #define XHCI_ID_POWER_MGMT      0x0003
   #define XHCI_ID_VIRTUALIZATION  0x0004
   #define XHCI_ID_MSG_IRQ         0x0005
   #define XHCI_ID_USB_LOCAL_MEM   0x0006
   
   /* XHCI register R/W wrappers */
   #define XREAD1(sc, what, a) \
           bus_space_read_1((sc)->sc_io_tag, (sc)->sc_io_hdl, \
                   (a) + (sc)->sc_##what##_off)
   #define XREAD2(sc, what, a) \
           bus_space_read_2((sc)->sc_io_tag, (sc)->sc_io_hdl, \
                   (a) + (sc)->sc_##what##_off)
   #define XREAD4(sc, what, a) \
           bus_space_read_4((sc)->sc_io_tag, (sc)->sc_io_hdl, \
                   (a) + (sc)->sc_##what##_off)
   #define XWRITE1(sc, what, a, x) \
           bus_space_write_1((sc)->sc_io_tag, (sc)->sc_io_hdl, \
                   (a) + (sc)->sc_##what##_off, (x))
   #define XWRITE2(sc, what, a, x) \
           bus_space_write_2((sc)->sc_io_tag, (sc)->sc_io_hdl, \
                   (a) + (sc)->sc_##what##_off, (x))
   #define XWRITE4(sc, what, a, x) \
           bus_space_write_4((sc)->sc_io_tag, (sc)->sc_io_hdl, \
                   (a) + (sc)->sc_##what##_off, (x))
   
   #endif  /* _XHCIREG_H_ */

Cache object: afbe9d2ff0b8166ac401e17c70906ae2