FreeBSD/Linux Kernel Cross Reference
sys/dev/usb/net/if_cue.c
1 /*-
2 * SPDX-License-Identifier: BSD-4-Clause
3 *
4 * Copyright (c) 1997, 1998, 1999, 2000
5 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. All advertising materials mentioning features or use of this software
16 * must display the following acknowledgement:
17 * This product includes software developed by Bill Paul.
18 * 4. Neither the name of the author nor the names of any co-contributors
19 * may be used to endorse or promote products derived from this software
20 * without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32 * THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35 #include <sys/cdefs.h>
36 __FBSDID("$FreeBSD$");
37
38 /*
39 * CATC USB-EL1210A USB to ethernet driver. Used in the CATC Netmate
40 * adapters and others.
41 *
42 * Written by Bill Paul <wpaul@ee.columbia.edu>
43 * Electrical Engineering Department
44 * Columbia University, New York City
45 */
46
47 /*
48 * The CATC USB-EL1210A provides USB ethernet support at 10Mbps. The
49 * RX filter uses a 512-bit multicast hash table, single perfect entry
50 * for the station address, and promiscuous mode. Unlike the ADMtek
51 * and KLSI chips, the CATC ASIC supports read and write combining
52 * mode where multiple packets can be transferred using a single bulk
53 * transaction, which helps performance a great deal.
54 */
55
56 #include <sys/stdint.h>
57 #include <sys/stddef.h>
58 #include <sys/param.h>
59 #include <sys/queue.h>
60 #include <sys/types.h>
61 #include <sys/systm.h>
62 #include <sys/socket.h>
63 #include <sys/kernel.h>
64 #include <sys/bus.h>
65 #include <sys/module.h>
66 #include <sys/lock.h>
67 #include <sys/mutex.h>
68 #include <sys/condvar.h>
69 #include <sys/sysctl.h>
70 #include <sys/sx.h>
71 #include <sys/unistd.h>
72 #include <sys/callout.h>
73 #include <sys/malloc.h>
74 #include <sys/priv.h>
75
76 #include <net/if.h>
77 #include <net/if_var.h>
78
79 #include <dev/usb/usb.h>
80 #include <dev/usb/usbdi.h>
81 #include <dev/usb/usbdi_util.h>
82 #include "usbdevs.h"
83
84 #define USB_DEBUG_VAR cue_debug
85 #include <dev/usb/usb_debug.h>
86 #include <dev/usb/usb_process.h>
87
88 #include <dev/usb/net/usb_ethernet.h>
89 #include <dev/usb/net/if_cuereg.h>
90
91 /*
92 * Various supported device vendors/products.
93 */
94
95 /* Belkin F5U111 adapter covered by NETMATE entry */
96
97 static const STRUCT_USB_HOST_ID cue_devs[] = {
98 #define CUE_DEV(v,p) { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) }
99 CUE_DEV(CATC, NETMATE),
100 CUE_DEV(CATC, NETMATE2),
101 CUE_DEV(SMARTBRIDGES, SMARTLINK),
102 #undef CUE_DEV
103 };
104
105 /* prototypes */
106
107 static device_probe_t cue_probe;
108 static device_attach_t cue_attach;
109 static device_detach_t cue_detach;
110
111 static usb_callback_t cue_bulk_read_callback;
112 static usb_callback_t cue_bulk_write_callback;
113
114 static uether_fn_t cue_attach_post;
115 static uether_fn_t cue_init;
116 static uether_fn_t cue_stop;
117 static uether_fn_t cue_start;
118 static uether_fn_t cue_tick;
119 static uether_fn_t cue_setmulti;
120 static uether_fn_t cue_setpromisc;
121
122 static uint8_t cue_csr_read_1(struct cue_softc *, uint16_t);
123 static uint16_t cue_csr_read_2(struct cue_softc *, uint8_t);
124 static int cue_csr_write_1(struct cue_softc *, uint16_t, uint16_t);
125 static int cue_mem(struct cue_softc *, uint8_t, uint16_t, void *, int);
126 static int cue_getmac(struct cue_softc *, void *);
127 static uint32_t cue_mchash(const uint8_t *);
128 static void cue_reset(struct cue_softc *);
129
130 #ifdef USB_DEBUG
131 static int cue_debug = 0;
132
133 static SYSCTL_NODE(_hw_usb, OID_AUTO, cue, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
134 "USB cue");
135 SYSCTL_INT(_hw_usb_cue, OID_AUTO, debug, CTLFLAG_RWTUN, &cue_debug, 0,
136 "Debug level");
137 #endif
138
139 static const struct usb_config cue_config[CUE_N_TRANSFER] = {
140 [CUE_BULK_DT_WR] = {
141 .type = UE_BULK,
142 .endpoint = UE_ADDR_ANY,
143 .direction = UE_DIR_OUT,
144 .bufsize = (MCLBYTES + 2),
145 .flags = {.pipe_bof = 1,},
146 .callback = cue_bulk_write_callback,
147 .timeout = 10000, /* 10 seconds */
148 },
149
150 [CUE_BULK_DT_RD] = {
151 .type = UE_BULK,
152 .endpoint = UE_ADDR_ANY,
153 .direction = UE_DIR_IN,
154 .bufsize = (MCLBYTES + 2),
155 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
156 .callback = cue_bulk_read_callback,
157 },
158 };
159
160 static device_method_t cue_methods[] = {
161 /* Device interface */
162 DEVMETHOD(device_probe, cue_probe),
163 DEVMETHOD(device_attach, cue_attach),
164 DEVMETHOD(device_detach, cue_detach),
165
166 DEVMETHOD_END
167 };
168
169 static driver_t cue_driver = {
170 .name = "cue",
171 .methods = cue_methods,
172 .size = sizeof(struct cue_softc),
173 };
174
175 DRIVER_MODULE(cue, uhub, cue_driver, NULL, NULL);
176 MODULE_DEPEND(cue, uether, 1, 1, 1);
177 MODULE_DEPEND(cue, usb, 1, 1, 1);
178 MODULE_DEPEND(cue, ether, 1, 1, 1);
179 MODULE_VERSION(cue, 1);
180 USB_PNP_HOST_INFO(cue_devs);
181
182 static const struct usb_ether_methods cue_ue_methods = {
183 .ue_attach_post = cue_attach_post,
184 .ue_start = cue_start,
185 .ue_init = cue_init,
186 .ue_stop = cue_stop,
187 .ue_tick = cue_tick,
188 .ue_setmulti = cue_setmulti,
189 .ue_setpromisc = cue_setpromisc,
190 };
191
192 #define CUE_SETBIT(sc, reg, x) \
193 cue_csr_write_1(sc, reg, cue_csr_read_1(sc, reg) | (x))
194
195 #define CUE_CLRBIT(sc, reg, x) \
196 cue_csr_write_1(sc, reg, cue_csr_read_1(sc, reg) & ~(x))
197
198 static uint8_t
199 cue_csr_read_1(struct cue_softc *sc, uint16_t reg)
200 {
201 struct usb_device_request req;
202 uint8_t val;
203
204 req.bmRequestType = UT_READ_VENDOR_DEVICE;
205 req.bRequest = CUE_CMD_READREG;
206 USETW(req.wValue, 0);
207 USETW(req.wIndex, reg);
208 USETW(req.wLength, 1);
209
210 if (uether_do_request(&sc->sc_ue, &req, &val, 1000)) {
211 /* ignore any errors */
212 }
213 return (val);
214 }
215
216 static uint16_t
217 cue_csr_read_2(struct cue_softc *sc, uint8_t reg)
218 {
219 struct usb_device_request req;
220 uint16_t val;
221
222 req.bmRequestType = UT_READ_VENDOR_DEVICE;
223 req.bRequest = CUE_CMD_READREG;
224 USETW(req.wValue, 0);
225 USETW(req.wIndex, reg);
226 USETW(req.wLength, 2);
227
228 (void)uether_do_request(&sc->sc_ue, &req, &val, 1000);
229 return (le16toh(val));
230 }
231
232 static int
233 cue_csr_write_1(struct cue_softc *sc, uint16_t reg, uint16_t val)
234 {
235 struct usb_device_request req;
236
237 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
238 req.bRequest = CUE_CMD_WRITEREG;
239 USETW(req.wValue, val);
240 USETW(req.wIndex, reg);
241 USETW(req.wLength, 0);
242
243 return (uether_do_request(&sc->sc_ue, &req, NULL, 1000));
244 }
245
246 static int
247 cue_mem(struct cue_softc *sc, uint8_t cmd, uint16_t addr, void *buf, int len)
248 {
249 struct usb_device_request req;
250
251 if (cmd == CUE_CMD_READSRAM)
252 req.bmRequestType = UT_READ_VENDOR_DEVICE;
253 else
254 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
255 req.bRequest = cmd;
256 USETW(req.wValue, 0);
257 USETW(req.wIndex, addr);
258 USETW(req.wLength, len);
259
260 return (uether_do_request(&sc->sc_ue, &req, buf, 1000));
261 }
262
263 static int
264 cue_getmac(struct cue_softc *sc, void *buf)
265 {
266 struct usb_device_request req;
267
268 req.bmRequestType = UT_READ_VENDOR_DEVICE;
269 req.bRequest = CUE_CMD_GET_MACADDR;
270 USETW(req.wValue, 0);
271 USETW(req.wIndex, 0);
272 USETW(req.wLength, ETHER_ADDR_LEN);
273
274 return (uether_do_request(&sc->sc_ue, &req, buf, 1000));
275 }
276
277 #define CUE_BITS 9
278
279 static uint32_t
280 cue_mchash(const uint8_t *addr)
281 {
282 uint32_t crc;
283
284 /* Compute CRC for the address value. */
285 crc = ether_crc32_le(addr, ETHER_ADDR_LEN);
286
287 return (crc & ((1 << CUE_BITS) - 1));
288 }
289
290 static void
291 cue_setpromisc(struct usb_ether *ue)
292 {
293 struct cue_softc *sc = uether_getsc(ue);
294 struct ifnet *ifp = uether_getifp(ue);
295
296 CUE_LOCK_ASSERT(sc, MA_OWNED);
297
298 /* if we want promiscuous mode, set the allframes bit */
299 if (ifp->if_flags & IFF_PROMISC)
300 CUE_SETBIT(sc, CUE_ETHCTL, CUE_ETHCTL_PROMISC);
301 else
302 CUE_CLRBIT(sc, CUE_ETHCTL, CUE_ETHCTL_PROMISC);
303
304 /* write multicast hash-bits */
305 cue_setmulti(ue);
306 }
307
308 static u_int
309 cue_hash_maddr(void *arg, struct sockaddr_dl *sdl, u_int cnt)
310 {
311 uint8_t *hashtbl = arg;
312 uint32_t h;
313
314 h = cue_mchash(LLADDR(sdl));
315 hashtbl[h >> 3] |= 1 << (h & 0x7);
316
317 return (1);
318 }
319
320 static void
321 cue_setmulti(struct usb_ether *ue)
322 {
323 struct cue_softc *sc = uether_getsc(ue);
324 struct ifnet *ifp = uether_getifp(ue);
325 uint32_t h, i;
326 uint8_t hashtbl[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
327
328 CUE_LOCK_ASSERT(sc, MA_OWNED);
329
330 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
331 for (i = 0; i < 8; i++)
332 hashtbl[i] = 0xff;
333 cue_mem(sc, CUE_CMD_WRITESRAM, CUE_MCAST_TABLE_ADDR,
334 &hashtbl, 8);
335 return;
336 }
337
338 /* now program new ones */
339 if_foreach_llmaddr(ifp, cue_hash_maddr, hashtbl);
340
341 /*
342 * Also include the broadcast address in the filter
343 * so we can receive broadcast frames.
344 */
345 if (ifp->if_flags & IFF_BROADCAST) {
346 h = cue_mchash(ifp->if_broadcastaddr);
347 hashtbl[h >> 3] |= 1 << (h & 0x7);
348 }
349
350 cue_mem(sc, CUE_CMD_WRITESRAM, CUE_MCAST_TABLE_ADDR, &hashtbl, 8);
351 }
352
353 static void
354 cue_reset(struct cue_softc *sc)
355 {
356 struct usb_device_request req;
357
358 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
359 req.bRequest = CUE_CMD_RESET;
360 USETW(req.wValue, 0);
361 USETW(req.wIndex, 0);
362 USETW(req.wLength, 0);
363
364 if (uether_do_request(&sc->sc_ue, &req, NULL, 1000)) {
365 /* ignore any errors */
366 }
367
368 /*
369 * wait a little while for the chip to get its brains in order:
370 */
371 uether_pause(&sc->sc_ue, hz / 100);
372 }
373
374 static void
375 cue_attach_post(struct usb_ether *ue)
376 {
377 struct cue_softc *sc = uether_getsc(ue);
378
379 cue_getmac(sc, ue->ue_eaddr);
380 }
381
382 static int
383 cue_probe(device_t dev)
384 {
385 struct usb_attach_arg *uaa = device_get_ivars(dev);
386
387 if (uaa->usb_mode != USB_MODE_HOST)
388 return (ENXIO);
389 if (uaa->info.bConfigIndex != CUE_CONFIG_IDX)
390 return (ENXIO);
391 if (uaa->info.bIfaceIndex != CUE_IFACE_IDX)
392 return (ENXIO);
393
394 return (usbd_lookup_id_by_uaa(cue_devs, sizeof(cue_devs), uaa));
395 }
396
397 /*
398 * Attach the interface. Allocate softc structures, do ifmedia
399 * setup and ethernet/BPF attach.
400 */
401 static int
402 cue_attach(device_t dev)
403 {
404 struct usb_attach_arg *uaa = device_get_ivars(dev);
405 struct cue_softc *sc = device_get_softc(dev);
406 struct usb_ether *ue = &sc->sc_ue;
407 uint8_t iface_index;
408 int error;
409
410 device_set_usb_desc(dev);
411 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
412
413 iface_index = CUE_IFACE_IDX;
414 error = usbd_transfer_setup(uaa->device, &iface_index,
415 sc->sc_xfer, cue_config, CUE_N_TRANSFER, sc, &sc->sc_mtx);
416 if (error) {
417 device_printf(dev, "allocating USB transfers failed\n");
418 goto detach;
419 }
420
421 ue->ue_sc = sc;
422 ue->ue_dev = dev;
423 ue->ue_udev = uaa->device;
424 ue->ue_mtx = &sc->sc_mtx;
425 ue->ue_methods = &cue_ue_methods;
426
427 error = uether_ifattach(ue);
428 if (error) {
429 device_printf(dev, "could not attach interface\n");
430 goto detach;
431 }
432 return (0); /* success */
433
434 detach:
435 cue_detach(dev);
436 return (ENXIO); /* failure */
437 }
438
439 static int
440 cue_detach(device_t dev)
441 {
442 struct cue_softc *sc = device_get_softc(dev);
443 struct usb_ether *ue = &sc->sc_ue;
444
445 usbd_transfer_unsetup(sc->sc_xfer, CUE_N_TRANSFER);
446 uether_ifdetach(ue);
447 mtx_destroy(&sc->sc_mtx);
448
449 return (0);
450 }
451
452 static void
453 cue_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
454 {
455 struct cue_softc *sc = usbd_xfer_softc(xfer);
456 struct usb_ether *ue = &sc->sc_ue;
457 struct ifnet *ifp = uether_getifp(ue);
458 struct usb_page_cache *pc;
459 uint8_t buf[2];
460 int len;
461 int actlen;
462
463 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
464
465 switch (USB_GET_STATE(xfer)) {
466 case USB_ST_TRANSFERRED:
467
468 if (actlen <= (int)(2 + sizeof(struct ether_header))) {
469 if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
470 goto tr_setup;
471 }
472 pc = usbd_xfer_get_frame(xfer, 0);
473 usbd_copy_out(pc, 0, buf, 2);
474 actlen -= 2;
475 len = buf[0] | (buf[1] << 8);
476 len = min(actlen, len);
477
478 uether_rxbuf(ue, pc, 2, len);
479 /* FALLTHROUGH */
480 case USB_ST_SETUP:
481 tr_setup:
482 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
483 usbd_transfer_submit(xfer);
484 uether_rxflush(ue);
485 return;
486
487 default: /* Error */
488 DPRINTF("bulk read error, %s\n",
489 usbd_errstr(error));
490
491 if (error != USB_ERR_CANCELLED) {
492 /* try to clear stall first */
493 usbd_xfer_set_stall(xfer);
494 goto tr_setup;
495 }
496 return;
497 }
498 }
499
500 static void
501 cue_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
502 {
503 struct cue_softc *sc = usbd_xfer_softc(xfer);
504 struct ifnet *ifp = uether_getifp(&sc->sc_ue);
505 struct usb_page_cache *pc;
506 struct mbuf *m;
507 uint8_t buf[2];
508
509 switch (USB_GET_STATE(xfer)) {
510 case USB_ST_TRANSFERRED:
511 DPRINTFN(11, "transfer complete\n");
512 if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
513
514 /* FALLTHROUGH */
515 case USB_ST_SETUP:
516 tr_setup:
517 IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
518
519 if (m == NULL)
520 return;
521 if (m->m_pkthdr.len > MCLBYTES)
522 m->m_pkthdr.len = MCLBYTES;
523 usbd_xfer_set_frame_len(xfer, 0, (m->m_pkthdr.len + 2));
524
525 /* the first two bytes are the frame length */
526
527 buf[0] = (uint8_t)(m->m_pkthdr.len);
528 buf[1] = (uint8_t)(m->m_pkthdr.len >> 8);
529
530 pc = usbd_xfer_get_frame(xfer, 0);
531 usbd_copy_in(pc, 0, buf, 2);
532 usbd_m_copy_in(pc, 2, m, 0, m->m_pkthdr.len);
533
534 /*
535 * If there's a BPF listener, bounce a copy of this frame
536 * to him.
537 */
538 BPF_MTAP(ifp, m);
539
540 m_freem(m);
541
542 usbd_transfer_submit(xfer);
543
544 return;
545
546 default: /* Error */
547 DPRINTFN(11, "transfer error, %s\n",
548 usbd_errstr(error));
549
550 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
551
552 if (error != USB_ERR_CANCELLED) {
553 /* try to clear stall first */
554 usbd_xfer_set_stall(xfer);
555 goto tr_setup;
556 }
557 return;
558 }
559 }
560
561 static void
562 cue_tick(struct usb_ether *ue)
563 {
564 struct cue_softc *sc = uether_getsc(ue);
565 struct ifnet *ifp = uether_getifp(ue);
566
567 CUE_LOCK_ASSERT(sc, MA_OWNED);
568
569 if_inc_counter(ifp, IFCOUNTER_COLLISIONS, cue_csr_read_2(sc, CUE_TX_SINGLECOLL));
570 if_inc_counter(ifp, IFCOUNTER_COLLISIONS, cue_csr_read_2(sc, CUE_TX_MULTICOLL));
571 if_inc_counter(ifp, IFCOUNTER_COLLISIONS, cue_csr_read_2(sc, CUE_TX_EXCESSCOLL));
572
573 if (cue_csr_read_2(sc, CUE_RX_FRAMEERR))
574 if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
575 }
576
577 static void
578 cue_start(struct usb_ether *ue)
579 {
580 struct cue_softc *sc = uether_getsc(ue);
581
582 /*
583 * start the USB transfers, if not already started:
584 */
585 usbd_transfer_start(sc->sc_xfer[CUE_BULK_DT_RD]);
586 usbd_transfer_start(sc->sc_xfer[CUE_BULK_DT_WR]);
587 }
588
589 static void
590 cue_init(struct usb_ether *ue)
591 {
592 struct cue_softc *sc = uether_getsc(ue);
593 struct ifnet *ifp = uether_getifp(ue);
594 int i;
595
596 CUE_LOCK_ASSERT(sc, MA_OWNED);
597
598 /*
599 * Cancel pending I/O and free all RX/TX buffers.
600 */
601 cue_stop(ue);
602 #if 0
603 cue_reset(sc);
604 #endif
605 /* Set MAC address */
606 for (i = 0; i < ETHER_ADDR_LEN; i++)
607 cue_csr_write_1(sc, CUE_PAR0 - i, IF_LLADDR(ifp)[i]);
608
609 /* Enable RX logic. */
610 cue_csr_write_1(sc, CUE_ETHCTL, CUE_ETHCTL_RX_ON | CUE_ETHCTL_MCAST_ON);
611
612 /* Load the multicast filter */
613 cue_setpromisc(ue);
614
615 /*
616 * Set the number of RX and TX buffers that we want
617 * to reserve inside the ASIC.
618 */
619 cue_csr_write_1(sc, CUE_RX_BUFPKTS, CUE_RX_FRAMES);
620 cue_csr_write_1(sc, CUE_TX_BUFPKTS, CUE_TX_FRAMES);
621
622 /* Set advanced operation modes. */
623 cue_csr_write_1(sc, CUE_ADVANCED_OPMODES,
624 CUE_AOP_EMBED_RXLEN | 0x01);/* 1 wait state */
625
626 /* Program the LED operation. */
627 cue_csr_write_1(sc, CUE_LEDCTL, CUE_LEDCTL_FOLLOW_LINK);
628
629 usbd_xfer_set_stall(sc->sc_xfer[CUE_BULK_DT_WR]);
630
631 ifp->if_drv_flags |= IFF_DRV_RUNNING;
632 cue_start(ue);
633 }
634
635 /*
636 * Stop the adapter and free any mbufs allocated to the
637 * RX and TX lists.
638 */
639 static void
640 cue_stop(struct usb_ether *ue)
641 {
642 struct cue_softc *sc = uether_getsc(ue);
643 struct ifnet *ifp = uether_getifp(ue);
644
645 CUE_LOCK_ASSERT(sc, MA_OWNED);
646
647 ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
648
649 /*
650 * stop all the transfers, if not already stopped:
651 */
652 usbd_transfer_stop(sc->sc_xfer[CUE_BULK_DT_WR]);
653 usbd_transfer_stop(sc->sc_xfer[CUE_BULK_DT_RD]);
654
655 cue_csr_write_1(sc, CUE_ETHCTL, 0);
656 cue_reset(sc);
657 }
Cache object: 932468999a9c7582ecbca18fc8e3f223
|