FreeBSD/Linux Kernel Cross Reference
sys/dev/usb/quirk/usb_quirk.h

     /* $FreeBSD$ */
     /*-
      * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
      *
      * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
      * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     */
    
    #ifndef _USB_QUIRK_H_
    #define _USB_QUIRK_H_
    
    enum {
            /*
             * Keep in sync with usb_quirk_str in usb_quirk.c, and with
             * share/man/man4/usb_quirk.4
             */
            UQ_NONE,                /* not a valid quirk */
    
            UQ_MATCH_VENDOR_ONLY,   /* match quirk on vendor only */
    
            /* Various quirks */
    
            UQ_AUDIO_SWAP_LR,       /* left and right sound channels are swapped */
            UQ_AU_INP_ASYNC,        /* input is async despite claim of adaptive */
            UQ_AU_NO_FRAC,          /* don't adjust for fractional samples */
            UQ_AU_NO_XU,            /* audio device has broken extension unit */
            UQ_BAD_ADC,             /* bad audio spec version number */
            UQ_BAD_AUDIO,           /* device claims audio class, but isn't */
            UQ_BROKEN_BIDIR,        /* printer has broken bidir mode */
            UQ_BUS_POWERED,         /* device is bus powered, despite claim */
            UQ_HID_IGNORE,          /* device should be ignored by hid class */
            UQ_KBD_IGNORE,          /* device should be ignored by kbd class */
            UQ_KBD_BOOTPROTO,       /* device should set the boot protocol */
            UQ_UMS_IGNORE,          /* device should be ignored by ums class */
            UQ_MS_BAD_CLASS,        /* doesn't identify properly */
            UQ_MS_LEADING_BYTE,     /* mouse sends an unknown leading byte */
            UQ_MS_REVZ,             /* mouse has Z-axis reversed */
            UQ_MS_VENDOR_BTN,       /* mouse has buttons in vendor usage page */
            UQ_NO_STRINGS,          /* string descriptors are broken */
            UQ_POWER_CLAIM,         /* hub lies about power status */
            UQ_SPUR_BUT_UP,         /* spurious mouse button up events */
            UQ_SWAP_UNICODE,        /* has some Unicode strings swapped */
            UQ_CFG_INDEX_1,         /* select configuration index 1 by default */
            UQ_CFG_INDEX_2,         /* select configuration index 2 by default */
            UQ_CFG_INDEX_3,         /* select configuration index 3 by default */
            UQ_CFG_INDEX_4,         /* select configuration index 4 by default */
            UQ_CFG_INDEX_0,         /* select configuration index 0 by default */
            UQ_ASSUME_CM_OVER_DATA, /* assume cm over data feature */
            UQ_IGNORE_CDC_CM,       /* ignore cm descriptor */
    
            /*
             * USB Mass Storage Quirks. See "storage/umass.c" for a
             * detailed description.
             */
            UQ_MSC_NO_TEST_UNIT_READY,      /* send start/stop instead of TUR */
            UQ_MSC_NO_RS_CLEAR_UA,          /* does not reset Unit Att. */
            UQ_MSC_NO_START_STOP,           /* does not support start/stop */
            UQ_MSC_NO_GETMAXLUN,            /* does not support get max LUN */
            UQ_MSC_NO_INQUIRY,              /* fake generic inq response */
            UQ_MSC_NO_INQUIRY_EVPD,         /* does not support inq EVPD */
            UQ_MSC_NO_PREVENT_ALLOW,        /* does not support medium removal */ 
            UQ_MSC_NO_SYNC_CACHE,           /* does not support sync cache */ 
            UQ_MSC_SHUTTLE_INIT,            /* requires Shuttle init sequence */
            UQ_MSC_ALT_IFACE_1,             /* switch to alternate interface 1 */
            UQ_MSC_FLOPPY_SPEED,            /* does floppy speeds (20kb/s) */
            UQ_MSC_IGNORE_RESIDUE,          /* gets residue wrong */
            UQ_MSC_WRONG_CSWSIG,            /* uses wrong CSW signature */
            UQ_MSC_RBC_PAD_TO_12,           /* pad RBC requests to 12 bytes */
            UQ_MSC_READ_CAP_OFFBY1,         /* reports sector count, not max sec. */
            UQ_MSC_FORCE_SHORT_INQ,         /* does not support full inq. */
            UQ_MSC_FORCE_WIRE_BBB,          /* force BBB wire protocol */
            UQ_MSC_FORCE_WIRE_CBI,          /* force CBI wire protocol */
            UQ_MSC_FORCE_WIRE_CBI_I,        /* force CBI with int. wire protocol */
            UQ_MSC_FORCE_PROTO_SCSI,        /* force SCSI command protocol */
            UQ_MSC_FORCE_PROTO_ATAPI,       /* force ATAPI command protocol */
            UQ_MSC_FORCE_PROTO_UFI,         /* force UFI command protocol */
            UQ_MSC_FORCE_PROTO_RBC,         /* force RBC command protocol */
            UQ_MSC_IGNORE,                  /* device should be ignored by umass */
    
           /* Ejection of mass storage (driver disk) */
           UQ_MSC_EJECT_HUAWEI,            /* ejects after Huawei USB command */
           UQ_MSC_EJECT_SIERRA,            /* ejects after Sierra USB command */
           UQ_MSC_EJECT_SCSIEJECT,         /* ejects after SCSI eject command */
           UQ_MSC_EJECT_REZERO,            /* ejects after SCSI rezero command */
           UQ_MSC_EJECT_ZTESTOR,           /* ejects after ZTE SCSI command */
           UQ_MSC_EJECT_CMOTECH,           /* ejects after C-motech SCSI cmd */
           UQ_MSC_EJECT_WAIT,              /* wait for the device to eject */
           UQ_MSC_EJECT_SAEL_M460,         /* ejects after Sael USB commands */ 
           UQ_MSC_EJECT_HUAWEISCSI,        /* ejects after Huawei SCSI command */
           UQ_MSC_EJECT_HUAWEISCSI2,       /* ejects after Huawei SCSI 2 command */
           UQ_MSC_EJECT_TCT,               /* ejects after TCT SCSI command */
   
           UQ_BAD_MIDI,            /* device claims MIDI class, but isn't */
           UQ_AU_VENDOR_CLASS,     /* audio device uses vendor and not audio class */
           UQ_SINGLE_CMD_MIDI,     /* at most one command per USB packet */
           UQ_MSC_DYMO_EJECT,      /* ejects Dymo MSC device */
           UQ_AU_SET_SPDIF_CM6206, /* enable S/PDIF audio output */
           UQ_WMT_IGNORE,          /* device should be ignored by wmt driver */
   
           USB_QUIRK_MAX
   };
   
   uint8_t usb_test_quirk(const struct usb_attach_arg *uaa, uint16_t quirk);
   
   #endif                                  /* _USB_QUIRK_H_ */

Cache object: a1bc6770ce4ee89c0f940817b79478a9