FreeBSD/Linux Kernel Cross Reference
sys/dev/usb/sl811hsreg.h

     /*      $NetBSD$        */
     /*      $FreeBSD: releng/7.3/sys/dev/usb/sl811hsreg.h 147993 2005-07-14 15:57:01Z takawata $    */
     
     
     /*
      * Copyright (c) 2001 The NetBSD Foundation, Inc.
      * All rights reserved.
      *
      * This code is derived from software contributed to The NetBSD Foundation
     * by Tetsuya Isaki.
     *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. All advertising materials mentioning features or use of this software
     *    must display the following acknowledgement:
     *      This product includes software developed by the NetBSD
     *      Foundation, Inc. and its contributors.
     * 4. Neither the name of The NetBSD Foundation nor the names of its
     *    contributors may be used to endorse or promote products derived
     *    from this software without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     * POSSIBILITY OF SUCH DAMAGE.
     */
    
    /*
     * ScanLogic SL811HS/T USB Host Controller
     */
    
    #define SL11_IDX_ADDR   (0x00)
    #define SL11_IDX_DATA   (0x01)
    #define SL11_PORTSIZE   (0x02)
    
    #define SL11_E0BASE     (0x00)          /* Base of Control0 */
    #define SL11_E0CTRL     (0x00)          /* Host Control Register */
    #define SL11_E0ADDR     (0x01)          /* Host Base Address */
    #define SL11_E0LEN      (0x02)          /* Host Base Length */
    #define SL11_E0STAT     (0x03)          /* USB Status (Read) */
    #define SL11_E0PID      SL11_E0STAT     /* Host PID, Device Endpoint (Write) */
    #define SL11_E0CONT     (0x04)          /* Transfer Count (Read) */
    #define SL11_E0DEV      SL11_E0CONT     /* Host Device Address (Write) */
    
    #define SL11_E1BASE     (0x08)          /* Base of Control1 */
    #define SL11_E1CTRL     (SL11_E1BASE + SL11_E0CTRL)
    #define SL11_E1ADDR     (SL11_E1BASE + SL11_E0ADDR)
    #define SL11_E1LEN      (SL11_E1BASE + SL11_E0LEN)
    #define SL11_E1STAT     (SL11_E1BASE + SL11_E0STAT)
    #define SL11_E1PID      (SL11_E1BASE + SL11_E0PID)
    #define SL11_E1CONT     (SL11_E1BASE + SL11_E0CONT)
    #define SL11_E1DEV      (SL11_E1BASE + SL11_E0DEV)
    
    #define SL11_CTRL       (0x05)          /* Control Register1 */
    #define SL11_IER        (0x06)          /* Interrupt Enable Register */
    #define SL11_ISR        (0x0d)          /* Interrupt Status Register */
    #define SL11_DATA       (0x0e)          /* SOF Counter Low (Write) */
    #define SL11_REV        SL11_DATA       /* HW Revision Register (Read) */
    #define SL811_CSOF      (0x0f)          /* SOF Counter High(R), Control2(W) */
    #define SL11_MEM        (0x10)          /* Memory Buffer (0x10 - 0xff) */
    
    #define SL11_EPCTRL_ARM         (0x01)
    #define SL11_EPCTRL_ENABLE      (0x02)
    #define SL11_EPCTRL_DIRECTION   (0x04)
    #define SL11_EPCTRL_ISO         (0x10)
    #define SL11_EPCTRL_SOF         (0x20)
    #define SL11_EPCTRL_DATATOGGLE  (0x40)
    #define SL11_EPCTRL_PREAMBLE    (0x80)
    
    #define SL11_EPPID_PIDMASK      (0xf0)
    #define SL11_EPPID_EPMASK       (0x0f)
    
    #define SL11_EPSTAT_ACK         (0x01)
    #define SL11_EPSTAT_ERROR       (0x02)
    #define SL11_EPSTAT_TIMEOUT     (0x04)
    #define SL11_EPSTAT_SEQUENCE    (0x08)
    #define SL11_EPSTAT_SETUP       (0x10)
    #define SL11_EPSTAT_OVERFLOW    (0x20)
    #define SL11_EPSTAT_NAK         (0x40)
    #define SL11_EPSTAT_STALL       (0x80)
    
    #define SL11_CTRL_ENABLESOF     (0x01)
    #define SL11_CTRL_EOF2          (0x04)
    #define SL11_CTRL_RESETENGINE   (0x08)
    #define SL11_CTRL_JKSTATE       (0x10)
    #define SL11_CTRL_LOWSPEED      (0x20)
   #define SL11_CTRL_SUSPEND       (0x40)
   
   #define SL11_IER_USBA           (0x01)  /* USB-A done */
   #define SL11_IER_USBB           (0x02)  /* USB-B done */
   #define SL11_IER_BABBLE         (0x04)  /* Babble detection */
   #define SL11_IER_SOFTIMER       (0x10)  /* 1ms SOF timer */
   #define SL11_IER_INSERT         (0x20)  /* Slave Insert/Remove detection */
   #define SL11_IER_RESET          (0x40)  /* USB Reset/Resume */
   
   #define SL11_ISR_USBA           (0x01)  /* USB-A done */
   #define SL11_ISR_USBB           (0x02)  /* USB-B done */
   #define SL11_ISR_BABBLE         (0x04)  /* Babble detection */
   #define SL11_ISR_SOFTIMER       (0x10)  /* 1ms SOF timer */
   #define SL11_ISR_INSERT         (0x20)  /* Slave Insert/Remove detection */
   #define SL11_ISR_RESET          (0x40)  /* USB Reset/Resume */
   #define SL11_ISR_DATA           (0x80)  /* Value of the Data+ pin */
   
   #define SL11_REV_USBA           (0x01)  /* USB-A */
   #define SL11_REV_USBB           (0x02)  /* USB-B */
   #define SL11_REV_REVMASK        (0xf0)  /* HW Revision */
   #define SL11_REV_REVSL11H       (0x00)  /* HW is SL11H */
   #define SL11_REV_REVSL811HS     (0x10)  /* HW is SL811HS */
   
   #define SL811_CSOF_SOFMASK      (0x3f)  /* SOF High Counter */
   #define SL811_CSOF_POLARITY     (0x40)  /* Change polarity */
   #define SL811_CSOF_MASTER       (0x80)  /* Master/Slave selection */
   

Cache object: c8f52634f7c180a99c192dc300c08c61