FreeBSD/Linux Kernel Cross Reference
sys/dev/usb/usb_controller.h

     /* $FreeBSD$ */
     /*-
      * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
      *
      * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
      * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     */
    
    #ifndef _USB_CONTROLLER_H_
    #define _USB_CONTROLLER_H_
    
    /* defines */
    
    #define USB_BUS_DMA_TAG_MAX 8
    
    /* structure prototypes  */
    
    struct usb_bus;
    struct usb_page;
    struct usb_endpoint;
    struct usb_page_cache;
    struct usb_setup_params;
    struct usb_hw_ep_profile;
    struct usb_fs_isoc_schedule;
    struct usb_endpoint_descriptor;
    
    /* typedefs */
    
    typedef void (usb_bus_mem_sub_cb_t)(struct usb_bus *bus, struct usb_page_cache *pc, struct usb_page *pg, usb_size_t size, usb_size_t align);
    typedef void (usb_bus_mem_cb_t)(struct usb_bus *bus, usb_bus_mem_sub_cb_t *scb);
    
    /*
     * The following structure is used to define all the USB BUS
     * callbacks.
     */
    struct usb_bus_methods {
            /* USB Device and Host mode - Mandatory */
    
            usb_handle_req_t *roothub_exec;
    
            void    (*endpoint_init) (struct usb_device *,
                        struct usb_endpoint_descriptor *, struct usb_endpoint *);
            void    (*xfer_setup) (struct usb_setup_params *);
            void    (*xfer_unsetup) (struct usb_xfer *);
            void    (*get_dma_delay) (struct usb_device *, uint32_t *);
            void    (*device_suspend) (struct usb_device *);
            void    (*device_resume) (struct usb_device *);
            void    (*set_hw_power) (struct usb_bus *);
            void    (*set_hw_power_sleep) (struct usb_bus *, uint32_t);
            /*
             * The following flag is set if one or more control transfers are
             * active:
             */
    #define USB_HW_POWER_CONTROL    0x01
            /*
             * The following flag is set if one or more bulk transfers are
             * active:
             */
    #define USB_HW_POWER_BULK       0x02
            /*
             * The following flag is set if one or more interrupt transfers are
             * active:
             */
    #define USB_HW_POWER_INTERRUPT  0x04
            /*
             * The following flag is set if one or more isochronous transfers
             * are active:
             */
    #define USB_HW_POWER_ISOC       0x08
            /*
             * The following flag is set if one or more non-root-HUB devices 
             * are present on the given USB bus:
             */
    #define USB_HW_POWER_NON_ROOT_HUB 0x10
            /*
             * The following flag is set if we are suspending
             */
    #define USB_HW_POWER_SUSPEND 0x20
            /*
            * The following flag is set if we are resuming
            */
   #define USB_HW_POWER_RESUME 0x40
           /*
            * The following flag is set if we are shutting down
            */
   #define USB_HW_POWER_SHUTDOWN 0x60
   
           /* USB Device mode only - Mandatory */
   
           void    (*get_hw_ep_profile) (struct usb_device *udev, const struct usb_hw_ep_profile **ppf, uint8_t ep_addr);
           void    (*xfer_stall) (struct usb_xfer *xfer);
           void    (*set_stall) (struct usb_device *udev, struct usb_endpoint *ep, uint8_t *did_stall);
   
           /* USB Device mode mandatory. USB Host mode optional. */
   
           void    (*clear_stall) (struct usb_device *udev, struct usb_endpoint *ep);
   
           /* Optional transfer polling support */
   
           void    (*xfer_poll) (struct usb_bus *);
   
           /* Optional fixed power mode support */
   
           void    (*get_power_mode) (struct usb_device *udev, int8_t *pmode);
   
           /* Optional endpoint uninit */
   
           void    (*endpoint_uninit) (struct usb_device *, struct usb_endpoint *);
   
           /* Optional device init */
   
           usb_error_t     (*device_init) (struct usb_device *);
   
           /* Optional device uninit */
   
           void    (*device_uninit) (struct usb_device *);
   
           /* Optional for device and host mode */
   
           void    (*start_dma_delay) (struct usb_xfer *);
   
           void    (*device_state_change) (struct usb_device *);
   
           /* Optional for host mode */
   
           usb_error_t     (*set_address) (struct usb_device *, struct mtx *, uint16_t);
   
           /* Optional for device and host mode */
   
           usb_error_t     (*set_endpoint_mode) (struct usb_device *, struct usb_endpoint *, uint8_t);
   };
   
   /*
    * The following structure is used to define all the USB pipe
    * callbacks.
    */
   struct usb_pipe_methods {
           /* Mandatory USB Device and Host mode callbacks: */
   
           void    (*open)(struct usb_xfer *);
           void    (*close)(struct usb_xfer *);
   
           void    (*enter)(struct usb_xfer *);
           void    (*start)(struct usb_xfer *);
   
           /* Optional */
   
           void   *info;
   };
   
   /*
    * The following structure keeps information about what a hardware USB
    * endpoint supports.
    */
   struct usb_hw_ep_profile {
           uint16_t max_in_frame_size;     /* IN-token direction */
           uint16_t max_out_frame_size;    /* OUT-token direction */
           uint8_t is_simplex:1;
           uint8_t support_multi_buffer:1;
           uint8_t support_bulk:1;
           uint8_t support_control:1;
           uint8_t support_interrupt:1;
           uint8_t support_isochronous:1;
           uint8_t support_in:1;           /* IN-token is supported */
           uint8_t support_out:1;          /* OUT-token is supported */
   };
   
   /* prototypes */
   
   void    usb_bus_mem_flush_all(struct usb_bus *bus, usb_bus_mem_cb_t *cb);
   uint8_t usb_bus_mem_alloc_all(struct usb_bus *bus, bus_dma_tag_t dmat, usb_bus_mem_cb_t *cb);
   void    usb_bus_mem_free_all(struct usb_bus *bus, usb_bus_mem_cb_t *cb);
   uint16_t usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr);
   void    usb_bus_reset_async_locked(struct usb_bus *bus);
   #if USB_HAVE_TT_SUPPORT
   uint8_t usbd_fs_isoc_schedule_alloc_slot(struct usb_xfer *isoc_xfer, uint16_t isoc_time);
   #endif
   
   #endif                                  /* _USB_CONTROLLER_H_ */

Cache object: ad8fa6426c037f5178f800ef30d4c52f