The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/dev/usb/usb_pf.h

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*-
    2  * SPDX-License-Identifier: BSD-3-Clause
    3  *
    4  * Copyright (c) 1990, 1991, 1993
    5  *      The Regents of the University of California.  All rights reserved.
    6  *
    7  * This code is derived from the Stanford/CMU enet packet filter,
    8  * (net/enet.c) distributed as part of 4.3BSD, and code contributed
    9  * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
   10  * Berkeley Laboratory.
   11  *
   12  * Redistribution and use in source and binary forms, with or without
   13  * modification, are permitted provided that the following conditions
   14  * are met:
   15  * 1. Redistributions of source code must retain the above copyright
   16  *    notice, this list of conditions and the following disclaimer.
   17  * 2. Redistributions in binary form must reproduce the above copyright
   18  *    notice, this list of conditions and the following disclaimer in the
   19  *    documentation and/or other materials provided with the distribution.
   20  * 3. Neither the name of the University nor the names of its contributors
   21  *    may be used to endorse or promote products derived from this software
   22  *    without specific prior written permission.
   23  *
   24  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
   25  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   26  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   27  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
   28  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   29  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
   30  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
   31  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   32  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
   33  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
   34  * SUCH DAMAGE.
   35  *
   36  * $FreeBSD$
   37  */
   38 
   39 #ifndef _DEV_USB_PF_H
   40 #define _DEV_USB_PF_H
   41 
   42 struct usbpf_pkthdr {
   43         uint32_t        up_totlen;      /* Total length including all headers */
   44         uint32_t        up_busunit;     /* Host controller unit number */
   45         uint8_t         up_address;     /* USB device index */
   46         uint8_t         up_mode;        /* Mode of transfer */
   47 #define USBPF_MODE_HOST         0
   48 #define USBPF_MODE_DEVICE       1
   49         uint8_t         up_type;        /* points SUBMIT / DONE */
   50         uint8_t         up_xfertype;    /* Transfer type, see USB2.0 spec. */
   51         uint32_t        up_flags;       /* Transfer flags */
   52 #define USBPF_FLAG_FORCE_SHORT_XFER     (1 << 0)
   53 #define USBPF_FLAG_SHORT_XFER_OK        (1 << 1)
   54 #define USBPF_FLAG_SHORT_FRAMES_OK      (1 << 2)
   55 #define USBPF_FLAG_PIPE_BOF             (1 << 3)
   56 #define USBPF_FLAG_PROXY_BUFFER         (1 << 4)
   57 #define USBPF_FLAG_EXT_BUFFER           (1 << 5)
   58 #define USBPF_FLAG_MANUAL_STATUS        (1 << 6)
   59 #define USBPF_FLAG_NO_PIPE_OK           (1 << 7)
   60 #define USBPF_FLAG_STALL_PIPE           (1 << 8)
   61         uint32_t        up_status;      /* Transfer status */
   62 #define USBPF_STATUS_OPEN               (1 << 0)
   63 #define USBPF_STATUS_TRANSFERRING       (1 << 1)
   64 #define USBPF_STATUS_DID_DMA_DELAY      (1 << 2)
   65 #define USBPF_STATUS_DID_CLOSE          (1 << 3)
   66 #define USBPF_STATUS_DRAINING           (1 << 4)
   67 #define USBPF_STATUS_STARTED            (1 << 5)
   68 #define USBPF_STATUS_BW_RECLAIMED       (1 << 6)
   69 #define USBPF_STATUS_CONTROL_XFR        (1 << 7)
   70 #define USBPF_STATUS_CONTROL_HDR        (1 << 8)
   71 #define USBPF_STATUS_CONTROL_ACT        (1 << 9)
   72 #define USBPF_STATUS_CONTROL_STALL      (1 << 10)
   73 #define USBPF_STATUS_SHORT_FRAMES_OK    (1 << 11)
   74 #define USBPF_STATUS_SHORT_XFER_OK      (1 << 12)
   75 #define USBPF_STATUS_BDMA_ENABLE        (1 << 13)
   76 #define USBPF_STATUS_BDMA_NO_POST_SYNC  (1 << 14)
   77 #define USBPF_STATUS_BDMA_SETUP         (1 << 15)
   78 #define USBPF_STATUS_ISOCHRONOUS_XFR    (1 << 16)
   79 #define USBPF_STATUS_CURR_DMA_SET       (1 << 17)
   80 #define USBPF_STATUS_CAN_CANCEL_IMMED   (1 << 18)
   81 #define USBPF_STATUS_DOING_CALLBACK     (1 << 19)
   82         uint32_t        up_error;       /* USB error, see USB_ERR_XXX */
   83         uint32_t        up_interval;    /* For interrupt and isoc (ms) */
   84         uint32_t        up_frames;      /* Number of following frames */
   85         uint32_t        up_packet_size; /* Packet size used */
   86         uint32_t        up_packet_count;        /* Packet count used */
   87         uint32_t        up_endpoint;    /* USB endpoint / stream ID */
   88         uint8_t         up_speed;       /* USB speed, see USB_SPEED_XXX */
   89         /* sizeof(struct usbpf_pkthdr) == 128 bytes */
   90         uint8_t         up_reserved[83];
   91 };
   92 
   93 struct usbpf_framehdr {
   94         /*
   95          * The frame length field excludes length of frame header and
   96          * any alignment.
   97          */
   98         uint32_t length;
   99 #define USBPF_FRAME_ALIGN(x)            (((x) + 3) & ~3)
  100         uint32_t flags;
  101 #define USBPF_FRAMEFLAG_READ            (1 << 0)
  102 #define USBPF_FRAMEFLAG_DATA_FOLLOWS    (1 << 1)
  103 };
  104 
  105 #define USBPF_HDR_LEN           128     /* bytes */
  106 #define USBPF_FRAME_HDR_LEN     8       /* bytes */
  107 
  108 extern uint8_t usbpf_pkthdr_size_ok[
  109     (sizeof(struct usbpf_pkthdr) == USBPF_HDR_LEN) ? 1 : -1];
  110 extern uint8_t usbpf_framehdr_size_ok[
  111     (sizeof(struct usbpf_framehdr) == USBPF_FRAME_HDR_LEN) ? 1 : -1];
  112 
  113 #define USBPF_XFERTAP_SUBMIT    0
  114 #define USBPF_XFERTAP_DONE      1
  115 
  116 #if defined(_KERNEL) || defined(_STANDALONE)
  117 void    usbpf_attach(struct usb_bus *);
  118 void    usbpf_detach(struct usb_bus *);
  119 void    usbpf_xfertap(struct usb_xfer *, int);
  120 #endif  /* _KERNEL || _STANDALONE */
  121 #endif  /* _DEV_USB_PF_H */
  122 

Cache object: 8b4f23ae6da9441194e40d2f2b5dbc9a


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.