FreeBSD/Linux Kernel Cross Reference
sys/dev/usb/uvisor.c
1 /* $NetBSD: uvisor.c,v 1.9 2001/01/23 14:04:14 augustss Exp $ */
2 /* $FreeBSD: releng/7.3/sys/dev/usb/uvisor.c 171233 2007-07-05 06:28:46Z imp $ */
3
4 /* Also already merged from NetBSD:
5 * $NetBSD: uvisor.c,v 1.12 2001/11/13 06:24:57 lukem Exp $
6 * $NetBSD: uvisor.c,v 1.13 2002/02/11 15:11:49 augustss Exp $
7 * $NetBSD: uvisor.c,v 1.14 2002/02/27 23:00:03 augustss Exp $
8 * $NetBSD: uvisor.c,v 1.15 2002/06/16 15:01:31 augustss Exp $
9 * $NetBSD: uvisor.c,v 1.16 2002/07/11 21:14:36 augustss Exp $
10 * $NetBSD: uvisor.c,v 1.17 2002/08/13 11:38:15 augustss Exp $
11 * $NetBSD: uvisor.c,v 1.18 2003/02/05 00:50:14 augustss Exp $
12 * $NetBSD: uvisor.c,v 1.19 2003/02/07 18:12:37 augustss Exp $
13 * $NetBSD: uvisor.c,v 1.20 2003/04/11 01:30:10 simonb Exp $
14 */
15
16
17 /*-
18 * Copyright (c) 2000 The NetBSD Foundation, Inc.
19 * All rights reserved.
20 *
21 * This code is derived from software contributed to The NetBSD Foundation
22 * by Lennart Augustsson (lennart@augustsson.net) at
23 * Carlstedt Research & Technology.
24 *
25 * Redistribution and use in source and binary forms, with or without
26 * modification, are permitted provided that the following conditions
27 * are met:
28 * 1. Redistributions of source code must retain the above copyright
29 * notice, this list of conditions and the following disclaimer.
30 * 2. Redistributions in binary form must reproduce the above copyright
31 * notice, this list of conditions and the following disclaimer in the
32 * documentation and/or other materials provided with the distribution.
33 * 3. All advertising materials mentioning features or use of this software
34 * must display the following acknowledgement:
35 * This product includes software developed by the NetBSD
36 * Foundation, Inc. and its contributors.
37 * 4. Neither the name of The NetBSD Foundation nor the names of its
38 * contributors may be used to endorse or promote products derived
39 * from this software without specific prior written permission.
40 *
41 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
42 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
43 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
44 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
45 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
46 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
47 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
48 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
49 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
50 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
51 * POSSIBILITY OF SUCH DAMAGE.
52 */
53
54 /*
55 * Handspring Visor (Palmpilot compatible PDA) driver
56 */
57
58 #include <sys/param.h>
59 #include <sys/systm.h>
60 #include <sys/kernel.h>
61 #include <sys/module.h>
62 #include <sys/bus.h>
63 #include <sys/conf.h>
64 #include <sys/tty.h>
65 #include <sys/sysctl.h>
66
67 #include <dev/usb/usb.h>
68 #include <dev/usb/usbhid.h>
69
70 #include <dev/usb/usbdi.h>
71 #include <dev/usb/usbdi_util.h>
72 #include "usbdevs.h"
73
74 #include <dev/usb/ucomvar.h>
75
76 #ifdef USB_DEBUG
77 #define DPRINTF(x) if (uvisordebug) printf x
78 #define DPRINTFN(n,x) if (uvisordebug>(n)) printf x
79 int uvisordebug = 0;
80 SYSCTL_NODE(_hw_usb, OID_AUTO, uvisor, CTLFLAG_RW, 0, "USB uvisor");
81 SYSCTL_INT(_hw_usb_uvisor, OID_AUTO, debug, CTLFLAG_RW,
82 &uvisordebug, 0, "uvisor debug level");
83 #else
84 #define DPRINTF(x)
85 #define DPRINTFN(n,x)
86 #endif
87
88 #define UVISOR_CONFIG_INDEX 0
89 #define UVISOR_IFACE_INDEX 0
90 #define UVISOR_MODVER 1
91
92 /* From the Linux driver */
93 /*
94 * UVISOR_REQUEST_BYTES_AVAILABLE asks the visor for the number of bytes that
95 * are available to be transfered to the host for the specified endpoint.
96 * Currently this is not used, and always returns 0x0001
97 */
98 #define UVISOR_REQUEST_BYTES_AVAILABLE 0x01
99
100 /*
101 * UVISOR_CLOSE_NOTIFICATION is set to the device to notify it that the host
102 * is now closing the pipe. An empty packet is sent in response.
103 */
104 #define UVISOR_CLOSE_NOTIFICATION 0x02
105
106 /*
107 * UVISOR_GET_CONNECTION_INFORMATION is sent by the host during enumeration to
108 * get the endpoints used by the connection.
109 */
110 #define UVISOR_GET_CONNECTION_INFORMATION 0x03
111
112
113 /*
114 * UVISOR_GET_CONNECTION_INFORMATION returns data in the following format
115 */
116 #define UVISOR_MAX_CONN 8
117 struct uvisor_connection_info {
118 uWord num_ports;
119 struct {
120 uByte port_function_id;
121 uByte port;
122 } connections[UVISOR_MAX_CONN];
123 };
124 #define UVISOR_CONNECTION_INFO_SIZE 18
125
126 /* struct uvisor_connection_info.connection[x].port defines: */
127 #define UVISOR_ENDPOINT_1 0x01
128 #define UVISOR_ENDPOINT_2 0x02
129
130 /* struct uvisor_connection_info.connection[x].port_function_id defines: */
131 #define UVISOR_FUNCTION_GENERIC 0x00
132 #define UVISOR_FUNCTION_DEBUGGER 0x01
133 #define UVISOR_FUNCTION_HOTSYNC 0x02
134 #define UVISOR_FUNCTION_CONSOLE 0x03
135 #define UVISOR_FUNCTION_REMOTE_FILE_SYS 0x04
136
137 /*
138 * Unknown PalmOS stuff.
139 */
140 #define UVISOR_GET_PALM_INFORMATION 0x04
141 #define UVISOR_GET_PALM_INFORMATION_LEN 0x44
142
143 struct uvisor_palm_connection_info {
144 uByte num_ports;
145 uByte endpoint_numbers_different;
146 uWord reserved1;
147 struct {
148 uDWord port_function_id;
149 uByte port;
150 uByte end_point_info;
151 uWord reserved;
152 } connections[UVISOR_MAX_CONN];
153 };
154
155
156 /*
157 * Crank down UVISORBUFSIZE from 1024 to 64 to avoid a problem where
158 * the Palm device and the USB host controller deadlock. The USB host
159 * controller is expecting an early-end-of-transmission packet with 0
160 * data, and the Palm doesn't send one because it's already
161 * communicated the amount of data it's going to send in a header
162 * (which ucom/uvisor are oblivious to). This is the problem that has
163 * been known on the pilot-link lists as the "[Free]BSD USB problem",
164 * but not understood.
165 */
166 #define UVISORIBUFSIZE 64
167 #define UVISOROBUFSIZE 1024
168
169 struct uvisor_softc {
170 struct ucom_softc sc_ucom;
171 u_int16_t sc_flags;
172 };
173
174 static usbd_status uvisor_init(struct uvisor_softc *);
175
176 /*static usbd_status clie_3_5_init(struct uvisor_softc *);*/
177
178 static void uvisor_close(void *, int);
179
180 struct ucom_callback uvisor_callback = {
181 NULL,
182 NULL,
183 NULL,
184 NULL,
185 NULL,
186 uvisor_close,
187 NULL,
188 NULL,
189 };
190
191 static device_probe_t uvisor_match;
192 static device_attach_t uvisor_attach;
193 static device_detach_t uvisor_detach;
194 static device_method_t uvisor_methods[] = {
195 /* Device interface */
196 DEVMETHOD(device_probe, uvisor_match),
197 DEVMETHOD(device_attach, uvisor_attach),
198 DEVMETHOD(device_detach, uvisor_detach),
199 { 0, 0 }
200 };
201
202
203 static driver_t uvisor_driver = {
204 "ucom",
205 uvisor_methods,
206 sizeof (struct uvisor_softc)
207 };
208
209 DRIVER_MODULE(uvisor, uhub, uvisor_driver, ucom_devclass, usbd_driver_load, 0);
210 MODULE_DEPEND(uvisor, usb, 1, 1, 1);
211 MODULE_DEPEND(uvisor, ucom, UCOM_MINVER, UCOM_PREFVER, UCOM_MAXVER);
212 MODULE_VERSION(uvisor, UVISOR_MODVER);
213
214 struct uvisor_type {
215 struct usb_devno uv_dev;
216 u_int16_t uv_flags;
217 #define PALM4 0x0001
218 #define VISOR 0x0002
219 #define PALM35 0x0004
220 };
221 static const struct uvisor_type uvisor_devs[] = {
222 {{ USB_VENDOR_ACEECA, USB_PRODUCT_ACEECA_MEZ1000 }, PALM4 },
223 {{ USB_VENDOR_GARMIN, USB_PRODUCT_GARMIN_IQUE_3600 }, PALM4 },
224 {{ USB_VENDOR_FOSSIL, USB_PRODUCT_FOSSIL_WRISTPDA }, PALM4 },
225 {{ USB_VENDOR_HANDSPRING, USB_PRODUCT_HANDSPRING_VISOR }, VISOR },
226 {{ USB_VENDOR_HANDSPRING, USB_PRODUCT_HANDSPRING_TREO }, PALM4 },
227 {{ USB_VENDOR_HANDSPRING, USB_PRODUCT_HANDSPRING_TREO600 }, PALM4 },
228 {{ USB_VENDOR_PALM, USB_PRODUCT_PALM_M500 }, PALM4 },
229 {{ USB_VENDOR_PALM, USB_PRODUCT_PALM_M505 }, PALM4 },
230 {{ USB_VENDOR_PALM, USB_PRODUCT_PALM_M515 }, PALM4 },
231 {{ USB_VENDOR_PALM, USB_PRODUCT_PALM_I705 }, PALM4 },
232 {{ USB_VENDOR_PALM, USB_PRODUCT_PALM_M125 }, PALM4 },
233 {{ USB_VENDOR_PALM, USB_PRODUCT_PALM_M130 }, PALM4 },
234 {{ USB_VENDOR_PALM, USB_PRODUCT_PALM_TUNGSTEN_Z }, PALM4 },
235 {{ USB_VENDOR_PALM, USB_PRODUCT_PALM_TUNGSTEN_T }, PALM4 },
236 {{ USB_VENDOR_PALM, USB_PRODUCT_PALM_ZIRE }, PALM4 },
237 {{ USB_VENDOR_PALM, USB_PRODUCT_PALM_ZIRE31 }, PALM4 },
238 {{ USB_VENDOR_SAMSUNG, USB_PRODUCT_SAMSUNG_I500 }, PALM4 },
239 {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_40 }, 0 },
240 {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_41 }, PALM4 },
241 {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_S360 }, PALM4 },
242 {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_NX60 }, PALM4 },
243 {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_35 }, PALM35 },
244 /* {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_25 }, PALM4 },*/
245 /* {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_TH55 }, PALM4 }, */ /* See PR 80935 */
246 {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_TJ37 }, PALM4 },
247 {{ USB_VENDOR_TAPWAVE, USB_PRODUCT_TAPWAVE_ZODIAC }, PALM4 },
248 };
249 #define uvisor_lookup(v, p) ((const struct uvisor_type *)usb_lookup(uvisor_devs, v, p))
250
251
252 static int
253 uvisor_match(device_t self)
254 {
255 struct usb_attach_arg *uaa = device_get_ivars(self);
256
257 if (uaa->iface != NULL)
258 return (UMATCH_NONE);
259
260 DPRINTFN(20,("uvisor: vendor=0x%x, product=0x%x\n",
261 uaa->vendor, uaa->product));
262
263 return (uvisor_lookup(uaa->vendor, uaa->product) != NULL ?
264 UMATCH_VENDOR_PRODUCT : UMATCH_NONE);
265 }
266
267 static int
268 uvisor_attach(device_t self)
269 {
270 struct uvisor_softc *sc = device_get_softc(self);
271 struct usb_attach_arg *uaa = device_get_ivars(self);
272 usbd_device_handle dev = uaa->device;
273 usbd_interface_handle iface;
274 usb_interface_descriptor_t *id;
275 usb_endpoint_descriptor_t *ed;
276 int i;
277 usbd_status err;
278 struct ucom_softc *ucom;
279
280 ucom = &sc->sc_ucom;
281 ucom->sc_dev = self;
282 ucom->sc_udev = dev;
283 ucom->sc_iface = uaa->iface;
284
285 DPRINTFN(10,("\nuvisor_attach: sc=%p\n", sc));
286
287 /* Move the device into the configured state. */
288 err = usbd_set_config_index(dev, UVISOR_CONFIG_INDEX, 1);
289 if (err) {
290 device_printf(self, "failed to set configuration, err=%s\n",
291 usbd_errstr(err));
292 goto bad;
293 }
294
295 err = usbd_device2interface_handle(dev, UVISOR_IFACE_INDEX, &iface);
296 if (err) {
297 device_printf(self, "failed to get interface, err=%s\n",
298 usbd_errstr(err));
299 goto bad;
300 }
301
302 sc->sc_flags = uvisor_lookup(uaa->vendor, uaa->product)->uv_flags;
303
304 id = usbd_get_interface_descriptor(iface);
305
306 ucom->sc_udev = dev;
307 ucom->sc_iface = iface;
308
309 ucom->sc_bulkin_no = ucom->sc_bulkout_no = -1;
310 for (i = 0; i < id->bNumEndpoints; i++) {
311 int addr, dir, attr;
312 ed = usbd_interface2endpoint_descriptor(iface, i);
313 if (ed == NULL) {
314 device_printf(self,
315 "could not read endpoint descriptor: %s\n",
316 usbd_errstr(err));
317 goto bad;
318 }
319
320 addr = ed->bEndpointAddress;
321 dir = UE_GET_DIR(ed->bEndpointAddress);
322 attr = ed->bmAttributes & UE_XFERTYPE;
323 if (dir == UE_DIR_IN && attr == UE_BULK)
324 ucom->sc_bulkin_no = addr;
325 else if (dir == UE_DIR_OUT && attr == UE_BULK)
326 ucom->sc_bulkout_no = addr;
327 else {
328 device_printf(self, "unexpected endpoint\n");
329 goto bad;
330 }
331 }
332 if (ucom->sc_bulkin_no == -1) {
333 device_printf(self, "Could not find data bulk in\n");
334 goto bad;
335 }
336 if (ucom->sc_bulkout_no == -1) {
337 device_printf(self, "Could not find data bulk out\n");
338 goto bad;
339 }
340
341 ucom->sc_parent = sc;
342 ucom->sc_portno = UCOM_UNK_PORTNO;
343 /* bulkin, bulkout set above */
344 ucom->sc_ibufsize = UVISORIBUFSIZE;
345 ucom->sc_obufsize = UVISOROBUFSIZE;
346 ucom->sc_ibufsizepad = UVISORIBUFSIZE;
347 ucom->sc_opkthdrlen = 0;
348 ucom->sc_callback = &uvisor_callback;
349
350 #if 0
351 if (uaa->vendor == USB_VENDOR_SONY &&
352 uaa->product == USB_PRODUCT_SONY_CLIE_35)
353 err = clie_3_5_init(sc);
354 else
355 #endif
356 err = uvisor_init(sc);
357
358 if (err) {
359 device_printf(ucom->sc_dev, "init failed, %s\n",
360 usbd_errstr(err));
361 goto bad;
362 }
363
364 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, ucom->sc_udev,
365 ucom->sc_dev);
366
367 DPRINTF(("uvisor: in=0x%x out=0x%x\n", ucom->sc_bulkin_no, ucom->sc_bulkout_no));
368 ucom_attach(&sc->sc_ucom);
369
370 return 0;
371
372 bad:
373 DPRINTF(("uvisor_attach: ATTACH ERROR\n"));
374 ucom->sc_dying = 1;
375 return ENXIO;
376 }
377
378 #if 0
379
380 int
381 uvisor_activate(device_t self, enum devact act)
382 {
383 struct uvisor_softc *sc = (struct uvisor_softc *)self;
384 int rv = 0;
385
386 switch (act) {
387 case DVACT_ACTIVATE:
388 return (EOPNOTSUPP);
389 break;
390
391 case DVACT_DEACTIVATE:
392 if (sc->sc_subdev != NULL)
393 rv = config_deactivate(sc->sc_subdev);
394 sc->sc_dying = 1;
395 break;
396 }
397 return (rv);
398 }
399
400 #endif
401
402 static int
403 uvisor_detach(device_t self)
404 {
405 struct uvisor_softc *sc = device_get_softc(self);
406 int rv = 0;
407
408 DPRINTF(("uvisor_detach: sc=%p\n", sc));
409 sc->sc_ucom.sc_dying = 1;
410 rv = ucom_detach(&sc->sc_ucom);
411
412 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_ucom.sc_udev,
413 sc->sc_ucom.sc_dev);
414
415 return (rv);
416 }
417
418 usbd_status
419 uvisor_init(struct uvisor_softc *sc)
420 {
421 usbd_status err;
422 usb_device_request_t req;
423 struct uvisor_connection_info coninfo;
424 struct uvisor_palm_connection_info pconinfo;
425 int actlen;
426 uWord avail;
427 char buffer[256];
428
429 if (sc->sc_flags & VISOR) {
430 DPRINTF(("uvisor_init: getting connection info\n"));
431 req.bmRequestType = UT_READ_VENDOR_ENDPOINT;
432 req.bRequest = UVISOR_GET_CONNECTION_INFORMATION;
433 USETW(req.wValue, 0);
434 USETW(req.wIndex, 0);
435 USETW(req.wLength, UVISOR_CONNECTION_INFO_SIZE);
436 err = usbd_do_request_flags(sc->sc_ucom.sc_udev, &req, &coninfo,
437 USBD_SHORT_XFER_OK, &actlen,
438 USBD_DEFAULT_TIMEOUT);
439 if (err)
440 return (err);
441 }
442 #ifdef USB_DEBUG
443 {
444 int i, np;
445 char *string;
446
447 np = UGETW(coninfo.num_ports);
448 device_printf(sc->sc_ucom.sc_dev, "Number of ports: %d\n", np);
449 for (i = 0; i < np; ++i) {
450 switch (coninfo.connections[i].port_function_id) {
451 case UVISOR_FUNCTION_GENERIC:
452 string = "Generic";
453 break;
454 case UVISOR_FUNCTION_DEBUGGER:
455 string = "Debugger";
456 break;
457 case UVISOR_FUNCTION_HOTSYNC:
458 string = "HotSync";
459 break;
460 case UVISOR_FUNCTION_REMOTE_FILE_SYS:
461 string = "Remote File System";
462 break;
463 default:
464 string = "unknown";
465 break;
466 }
467 device_printf(sc->sc_ucom.sc_dev,
468 "port %d, is for %s\n",
469 coninfo.connections[i].port, string);
470 }
471 }
472 #endif
473
474 if (sc->sc_flags & PALM4) {
475 int port;
476 /* Palm OS 4.0 Hack */
477 req.bmRequestType = UT_READ_VENDOR_ENDPOINT;
478 req.bRequest = UVISOR_GET_PALM_INFORMATION;
479 USETW(req.wValue, 0);
480 USETW(req.wIndex, 0);
481 USETW(req.wLength, UVISOR_GET_PALM_INFORMATION_LEN);
482 err = usbd_do_request_flags(sc->sc_ucom.sc_udev, &req, &pconinfo,
483 USBD_SHORT_XFER_OK, &actlen,
484 USBD_DEFAULT_TIMEOUT);
485 if (err)
486 return (err);
487
488 if (pconinfo.endpoint_numbers_different) {
489 port = pconinfo.connections[0].end_point_info;
490 sc->sc_ucom.sc_bulkin_no = (port >> 4) | UE_DIR_IN;
491 sc->sc_ucom.sc_bulkout_no = (port & 0xf) | UE_DIR_OUT;
492 } else {
493 port = pconinfo.connections[0].port;
494 sc->sc_ucom.sc_bulkin_no = port | UE_DIR_IN;
495 sc->sc_ucom.sc_bulkout_no = port | UE_DIR_OUT;
496 }
497 #if 0
498 req.bmRequestType = UT_READ_VENDOR_ENDPOINT;
499 req.bRequest = UVISOR_GET_PALM_INFORMATION;
500 USETW(req.wValue, 0);
501 USETW(req.wIndex, 0);
502 USETW(req.wLength, UVISOR_GET_PALM_INFORMATION_LEN);
503 err = usbd_do_request(sc->sc_ucom.sc_udev, &req, buffer);
504 if (err)
505 return (err);
506 #endif
507 }
508
509 if (sc->sc_flags & PALM35) {
510 /* get the config number */
511 DPRINTF(("clie_3_5_init: getting config info\n"));
512 req.bmRequestType = UT_READ;
513 req.bRequest = UR_GET_CONFIG;
514 USETW(req.wValue, 0);
515 USETW(req.wIndex, 0);
516 USETW(req.wLength, 1);
517 err = usbd_do_request(sc->sc_ucom.sc_udev, &req, buffer);
518 if (err)
519 return (err);
520
521 /* get the interface number */
522 DPRINTF(("clie_3_5_init: get the interface number\n"));
523 req.bmRequestType = UT_READ_DEVICE;
524 req.bRequest = UR_GET_INTERFACE;
525 USETW(req.wValue, 0);
526 USETW(req.wIndex, 0);
527 USETW(req.wLength, 1);
528 err = usbd_do_request(sc->sc_ucom.sc_udev, &req, buffer);
529 if (err)
530 return (err);
531 }
532
533 DPRINTF(("uvisor_init: getting available bytes\n"));
534 req.bmRequestType = UT_READ_VENDOR_ENDPOINT;
535 req.bRequest = UVISOR_REQUEST_BYTES_AVAILABLE;
536 USETW(req.wValue, 0);
537 USETW(req.wIndex, 5);
538 USETW(req.wLength, sizeof avail);
539 err = usbd_do_request(sc->sc_ucom.sc_udev, &req, &avail);
540 if (err)
541 return (err);
542 DPRINTF(("uvisor_init: avail=%d\n", UGETW(avail)));
543
544 DPRINTF(("uvisor_init: done\n"));
545 return (err);
546 }
547
548 #if 0
549 usbd_status
550 clie_3_5_init(struct uvisor_softc *sc)
551 {
552 usbd_status err;
553 usb_device_request_t req;
554 char buffer[256];
555
556 /*
557 * Note that PEG-300 series devices expect the following two calls.
558 */
559
560 /* get the config number */
561 DPRINTF(("clie_3_5_init: getting config info\n"));
562 req.bmRequestType = UT_READ;
563 req.bRequest = UR_GET_CONFIG;
564 USETW(req.wValue, 0);
565 USETW(req.wIndex, 0);
566 USETW(req.wLength, 1);
567 err = usbd_do_request(sc->sc_ucom.sc_udev, &req, buffer);
568 if (err)
569 return (err);
570
571 /* get the interface number */
572 DPRINTF(("clie_3_5_init: get the interface number\n"));
573 req.bmRequestType = UT_READ_DEVICE;
574 req.bRequest = UR_GET_INTERFACE;
575 USETW(req.wValue, 0);
576 USETW(req.wIndex, 0);
577 USETW(req.wLength, 1);
578 err = usbd_do_request(sc->sc_ucom.sc_udev, &req, buffer);
579 if (err)
580 return (err);
581
582 #ifdef USB_DEBUG
583 {
584 struct uvisor_connection_info coninfo;
585 int i, np;
586 char *string;
587
588 np = UGETW(coninfo.num_ports);
589 DPRINTF(("%s: Number of ports: %d\n", device_get_nameunit(sc->sc_ucom.sc_dev), np));
590 for (i = 0; i < np; ++i) {
591 switch (coninfo.connections[i].port_function_id) {
592 case UVISOR_FUNCTION_GENERIC:
593 string = "Generic";
594 break;
595 case UVISOR_FUNCTION_DEBUGGER:
596 string = "Debugger";
597 break;
598 case UVISOR_FUNCTION_HOTSYNC:
599 string = "HotSync";
600 break;
601 case UVISOR_FUNCTION_REMOTE_FILE_SYS:
602 string = "Remote File System";
603 break;
604 default:
605 string = "unknown";
606 break;
607 }
608 DPRINTF(("%s: port %d, is for %s\n",
609 device_get_nameunit(sc->sc_ucom.sc_dev), coninfo.connections[i].port,
610 string));
611 }
612 }
613 #endif
614
615 DPRINTF(("clie_3_5_init: done\n"));
616 return (err);
617 }
618 #endif
619
620 void
621 uvisor_close(void *addr, int portno)
622 {
623 struct uvisor_softc *sc = addr;
624 usb_device_request_t req;
625 struct uvisor_connection_info coninfo; /* XXX ? */
626 int actlen;
627
628 if (sc->sc_ucom.sc_dying)
629 return;
630
631 req.bmRequestType = UT_READ_VENDOR_ENDPOINT; /* XXX read? */
632 req.bRequest = UVISOR_CLOSE_NOTIFICATION;
633 USETW(req.wValue, 0);
634 USETW(req.wIndex, 0);
635 USETW(req.wLength, UVISOR_CONNECTION_INFO_SIZE);
636 (void)usbd_do_request_flags(sc->sc_ucom.sc_udev, &req, &coninfo,
637 USBD_SHORT_XFER_OK, &actlen,
638 USBD_DEFAULT_TIMEOUT);
639 }
Cache object: 7f224ba663e785fc0591c0a74b637e65
|