Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/dev/vx/if_vx.c
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 /*- 2 * Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Herb Peyerl. 16 * 4. The name of Herb Peyerl may not be used to endorse or promote products 17 * derived from this software without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 20 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 21 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 22 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 23 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 24 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 25 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 26 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 27 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 28 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 29 * 30 * 31 */ 32 33 #include <sys/cdefs.h> 34 __FBSDID("$FreeBSD: releng/6.2/sys/dev/vx/if_vx.c 152038 2005-11-04 17:45:20Z jhb $"); 35 36 /* 37 * Created from if_ep.c driver by Fred Gray (fgray@rice.edu) to support 38 * the 3c590 family. 39 */ 40 41 /* 42 * Modified from the FreeBSD 1.1.5.1 version by: 43 * Andres Vega Garcia 44 * INRIA - Sophia Antipolis, France 45 * avega@sophia.inria.fr 46 */ 47 48 /* 49 * Promiscuous mode added and interrupt logic slightly changed 50 * to reduce the number of adapter failures. Transceiver select 51 * logic changed to use value from EEPROM. Autoconfiguration 52 * features added. 53 * Done by: 54 * Serge Babkin 55 * Chelindbank (Chelyabinsk, Russia) 56 * babkin@hq.icb.chel.su 57 */ 58 59 60 #include <sys/param.h> 61 #include <sys/systm.h> 62 #include <sys/sockio.h> 63 #include <sys/kernel.h> 64 #include <sys/malloc.h> 65 #include <sys/mbuf.h> 66 #include <sys/socket.h> 67 68 #include <net/if.h> 69 70 #include <net/ethernet.h> 71 #include <net/if_arp.h> 72 #include <net/if_types.h> 73 74 #include <machine/bus.h> 75 76 #include <sys/bus.h> 77 78 #include <net/bpf.h> 79 80 #include <dev/vx/if_vxreg.h> 81 #include <dev/vx/if_vxvar.h> 82 83 #define ETHER_MAX_LEN 1518 84 #define ETHER_ADDR_LEN 6 85 #define ETHER_ALIGN 2 86 87 static struct connector_entry { 88 int bit; 89 char *name; 90 } conn_tab[VX_CONNECTORS] = { 91 92 #define CONNECTOR_UTP 0 93 { 94 0x08, "utp" 95 }, 96 #define CONNECTOR_AUI 1 97 { 98 0x20, "aui" 99 }, 100 /* dummy */ 101 { 102 0, "???" 103 }, 104 #define CONNECTOR_BNC 3 105 { 106 0x10, "bnc" 107 }, 108 #define CONNECTOR_TX 4 109 { 110 0x02, "tx" 111 }, 112 #define CONNECTOR_FX 5 113 { 114 0x04, "fx" 115 }, 116 #define CONNECTOR_MII 6 117 { 118 0x40, "mii" 119 }, 120 { 121 0, "???" 122 } 123 }; 124 125 static void vx_txstat(struct vx_softc *); 126 static int vx_status(struct vx_softc *); 127 static void vx_init(void *); 128 static void vx_init_locked(struct vx_softc *); 129 static int vx_ioctl(struct ifnet *, u_long, caddr_t); 130 static void vx_start(struct ifnet *); 131 static void vx_start_locked(struct ifnet *); 132 static void vx_watchdog(struct ifnet *); 133 static void vx_reset(struct vx_softc *); 134 static void vx_read(struct vx_softc *); 135 static struct mbuf *vx_get(struct vx_softc *, u_int); 136 static void vx_mbuf_fill(void *); 137 static void vx_mbuf_empty(struct vx_softc *); 138 static void vx_setfilter(struct vx_softc *); 139 static void vx_getlink(struct vx_softc *); 140 static void vx_setlink(struct vx_softc *); 141 142 int 143 vx_attach(device_t dev) 144 { 145 struct vx_softc *sc = device_get_softc(dev); 146 struct ifnet *ifp; 147 int i; 148 u_char eaddr[6]; 149 150 ifp = sc->vx_ifp = if_alloc(IFT_ETHER); 151 if (ifp == NULL) { 152 device_printf(dev, "can not if_alloc()\n"); 153 return 0; 154 } 155 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 156 157 mtx_init(&sc->vx_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 158 MTX_DEF); 159 callout_init_mtx(&sc->vx_callout, &sc->vx_mtx, 0); 160 GO_WINDOW(0); 161 CSR_WRITE_2(sc, VX_COMMAND, GLOBAL_RESET); 162 VX_BUSY_WAIT; 163 164 vx_getlink(sc); 165 166 /* 167 * Read the station address from the eeprom 168 */ 169 GO_WINDOW(0); 170 for (i = 0; i < 3; i++) { 171 int x; 172 173 if (vx_busy_eeprom(sc)) { 174 mtx_destroy(&sc->vx_mtx); 175 if_free(ifp); 176 return 0; 177 } 178 CSR_WRITE_2(sc, VX_W0_EEPROM_COMMAND, EEPROM_CMD_RD 179 | (EEPROM_OEM_ADDR0 + i)); 180 if (vx_busy_eeprom(sc)) { 181 mtx_destroy(&sc->vx_mtx); 182 if_free(ifp); 183 return 0; 184 } 185 x = CSR_READ_2(sc, VX_W0_EEPROM_DATA); 186 eaddr[(i << 1)] = x >> 8; 187 eaddr[(i << 1) + 1] = x; 188 } 189 190 ifp->if_mtu = ETHERMTU; 191 ifp->if_snd.ifq_maxlen = IFQ_MAXLEN; 192 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 193 ifp->if_start = vx_start; 194 ifp->if_ioctl = vx_ioctl; 195 ifp->if_init = vx_init; 196 ifp->if_watchdog = vx_watchdog; 197 ifp->if_softc = sc; 198 199 ether_ifattach(ifp, eaddr); 200 201 sc->vx_tx_start_thresh = 20; /* probably a good starting point. */ 202 203 vx_stop(sc); 204 205 return 1; 206 } 207 208 /* 209 * The order in here seems important. Otherwise we may not receive 210 * interrupts. ?! 211 */ 212 static void 213 vx_init(void *xsc) 214 { 215 struct vx_softc *sc = (struct vx_softc *)xsc; 216 217 VX_LOCK(sc); 218 vx_init_locked(sc); 219 VX_UNLOCK(sc); 220 } 221 222 static void 223 vx_init_locked(struct vx_softc *sc) 224 { 225 struct ifnet *ifp = sc->vx_ifp; 226 int i; 227 228 VX_LOCK_ASSERT(sc); 229 230 VX_BUSY_WAIT; 231 232 GO_WINDOW(2); 233 234 for (i = 0; i < 6; i++) /* Reload the ether_addr. */ 235 CSR_WRITE_1(sc, VX_W2_ADDR_0 + i, IFP2ENADDR(sc->vx_ifp)[i]); 236 237 CSR_WRITE_2(sc, VX_COMMAND, RX_RESET); 238 VX_BUSY_WAIT; 239 CSR_WRITE_2(sc, VX_COMMAND, TX_RESET); 240 VX_BUSY_WAIT; 241 242 GO_WINDOW(1); /* Window 1 is operating window */ 243 for (i = 0; i < 31; i++) 244 CSR_READ_1(sc, VX_W1_TX_STATUS); 245 246 CSR_WRITE_2(sc, VX_COMMAND, SET_RD_0_MASK | S_CARD_FAILURE | 247 S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL); 248 CSR_WRITE_2(sc, VX_COMMAND, SET_INTR_MASK | S_CARD_FAILURE | 249 S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL); 250 251 /* 252 * Attempt to get rid of any stray interrupts that occured during 253 * configuration. On the i386 this isn't possible because one may 254 * already be queued. However, a single stray interrupt is 255 * unimportant. 256 */ 257 CSR_WRITE_2(sc, VX_COMMAND, ACK_INTR | 0xff); 258 259 vx_setfilter(sc); 260 vx_setlink(sc); 261 262 CSR_WRITE_2(sc, VX_COMMAND, RX_ENABLE); 263 CSR_WRITE_2(sc, VX_COMMAND, TX_ENABLE); 264 265 vx_mbuf_fill(sc); 266 267 /* Interface is now `running', with no output active. */ 268 ifp->if_drv_flags |= IFF_DRV_RUNNING; 269 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 270 271 /* Attempt to start output, if any. */ 272 vx_start_locked(ifp); 273 } 274 275 static void 276 vx_setfilter(struct vx_softc *sc) 277 { 278 struct ifnet *ifp = sc->vx_ifp; 279 280 VX_LOCK_ASSERT(sc); 281 GO_WINDOW(1); /* Window 1 is operating window */ 282 CSR_WRITE_2(sc, VX_COMMAND, SET_RX_FILTER | 283 FIL_INDIVIDUAL | FIL_BRDCST | FIL_MULTICAST | 284 ((ifp->if_flags & IFF_PROMISC) ? FIL_PROMISC : 0)); 285 } 286 287 static void 288 vx_getlink(struct vx_softc *sc) 289 { 290 int n, k; 291 292 GO_WINDOW(3); 293 sc->vx_connectors = CSR_READ_2(sc, VX_W3_RESET_OPT) & 0x7f; 294 for (n = 0, k = 0; k < VX_CONNECTORS; k++) { 295 if (sc->vx_connectors & conn_tab[k].bit) { 296 if (n > 0) 297 printf("/"); 298 printf("%s", conn_tab[k].name); 299 n++; 300 } 301 } 302 if (sc->vx_connectors == 0) { 303 printf("no connectors!"); 304 return; 305 } 306 GO_WINDOW(3); 307 sc->vx_connector = 308 (CSR_READ_4(sc, VX_W3_INTERNAL_CFG) & INTERNAL_CONNECTOR_MASK) 309 >> INTERNAL_CONNECTOR_BITS; 310 if (sc->vx_connector & 0x10) { 311 sc->vx_connector &= 0x0f; 312 printf("[*%s*]", conn_tab[(int)sc->vx_connector].name); 313 printf(": disable 'auto select' with DOS util!"); 314 } else { 315 printf("[*%s*]", conn_tab[(int)sc->vx_connector].name); 316 } 317 } 318 319 static void 320 vx_setlink(struct vx_softc *sc) 321 { 322 struct ifnet *ifp = sc->vx_ifp; 323 int i, j, k; 324 char *reason, *warning; 325 static int prev_flags; 326 static signed char prev_conn = -1; 327 328 VX_LOCK_ASSERT(sc); 329 if (prev_conn == -1) 330 prev_conn = sc->vx_connector; 331 332 /* 333 * S.B. 334 * 335 * Now behavior was slightly changed: 336 * 337 * if any of flags link[0-2] is used and its connector is 338 * physically present the following connectors are used: 339 * 340 * link0 - AUI * highest precedence 341 * link1 - BNC 342 * link2 - UTP * lowest precedence 343 * 344 * If none of them is specified then 345 * connector specified in the EEPROM is used 346 * (if present on card or UTP if not). 347 */ 348 i = sc->vx_connector; /* default in EEPROM */ 349 reason = "default"; 350 warning = 0; 351 352 if (ifp->if_flags & IFF_LINK0) { 353 if (sc->vx_connectors & conn_tab[CONNECTOR_AUI].bit) { 354 i = CONNECTOR_AUI; 355 reason = "link0"; 356 } else { 357 warning = "aui not present! (link0)"; 358 } 359 } else if (ifp->if_flags & IFF_LINK1) { 360 if (sc->vx_connectors & conn_tab[CONNECTOR_BNC].bit) { 361 i = CONNECTOR_BNC; 362 reason = "link1"; 363 } else { 364 warning = "bnc not present! (link1)"; 365 } 366 } else if (ifp->if_flags & IFF_LINK2) { 367 if (sc->vx_connectors & conn_tab[CONNECTOR_UTP].bit) { 368 i = CONNECTOR_UTP; 369 reason = "link2"; 370 } else { 371 warning = "utp not present! (link2)"; 372 } 373 } else if ((sc->vx_connectors & conn_tab[(int)sc->vx_connector].bit) == 0) { 374 warning = "strange connector type in EEPROM."; 375 reason = "forced"; 376 i = CONNECTOR_UTP; 377 } 378 /* Avoid unnecessary message. */ 379 k = (prev_flags ^ ifp->if_flags) & (IFF_LINK0 | IFF_LINK1 | IFF_LINK2); 380 if ((k != 0) || (prev_conn != i)) { 381 if (warning != NULL) 382 if_printf(ifp, "warning: %s\n", warning); 383 if_printf(ifp, "selected %s. (%s)\n", conn_tab[i].name, reason); 384 } 385 /* Set the selected connector. */ 386 GO_WINDOW(3); 387 j = CSR_READ_4(sc, VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK; 388 CSR_WRITE_4(sc, VX_W3_INTERNAL_CFG, j | (i << INTERNAL_CONNECTOR_BITS)); 389 390 /* First, disable all. */ 391 CSR_WRITE_2(sc, VX_COMMAND, STOP_TRANSCEIVER); 392 DELAY(800); 393 GO_WINDOW(4); 394 CSR_WRITE_2(sc, VX_W4_MEDIA_TYPE, 0); 395 396 /* Second, enable the selected one. */ 397 switch (i) { 398 case CONNECTOR_UTP: 399 GO_WINDOW(4); 400 CSR_WRITE_2(sc, VX_W4_MEDIA_TYPE, ENABLE_UTP); 401 break; 402 case CONNECTOR_BNC: 403 CSR_WRITE_2(sc, VX_COMMAND, START_TRANSCEIVER); 404 DELAY(800); 405 break; 406 case CONNECTOR_TX: 407 case CONNECTOR_FX: 408 GO_WINDOW(4); 409 CSR_WRITE_2(sc, VX_W4_MEDIA_TYPE, LINKBEAT_ENABLE); 410 break; 411 default: /* AUI and MII fall here */ 412 break; 413 } 414 GO_WINDOW(1); 415 416 prev_flags = ifp->if_flags; 417 prev_conn = i; 418 } 419 420 static void 421 vx_start(struct ifnet *ifp) 422 { 423 struct vx_softc *sc = ifp->if_softc; 424 425 VX_LOCK(sc); 426 vx_start_locked(ifp); 427 VX_UNLOCK(sc); 428 } 429 430 static void 431 vx_start_locked(struct ifnet *ifp) 432 { 433 struct vx_softc *sc = ifp->if_softc; 434 struct mbuf *m; 435 int len, pad; 436 437 VX_LOCK_ASSERT(sc); 438 439 /* Don't transmit if interface is busy or not running */ 440 if ((sc->vx_ifp->if_drv_flags & 441 (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != IFF_DRV_RUNNING) 442 return; 443 444 startagain: 445 /* Sneak a peek at the next packet */ 446 m = ifp->if_snd.ifq_head; 447 if (m == NULL) { 448 return; 449 } 450 /* We need to use m->m_pkthdr.len, so require the header */ 451 M_ASSERTPKTHDR(m); 452 len = m->m_pkthdr.len; 453 454 pad = (4 - len) & 3; 455 456 /* 457 * The 3c509 automatically pads short packets to minimum ethernet 458 * length, but we drop packets that are too large. Perhaps we should 459 * truncate them instead? 460 */ 461 if (len + pad > ETHER_MAX_LEN) { 462 /* packet is obviously too large: toss it */ 463 ++ifp->if_oerrors; 464 IF_DEQUEUE(&ifp->if_snd, m); 465 m_freem(m); 466 goto readcheck; 467 } 468 VX_BUSY_WAIT; 469 if (CSR_READ_2(sc, VX_W1_FREE_TX) < len + pad + 4) { 470 CSR_WRITE_2(sc, VX_COMMAND, 471 SET_TX_AVAIL_THRESH | ((len + pad + 4) >> 2)); 472 /* not enough room in FIFO - make sure */ 473 if (CSR_READ_2(sc, VX_W1_FREE_TX) < len + pad + 4) { 474 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 475 ifp->if_timer = 1; 476 return; 477 } 478 } 479 CSR_WRITE_2(sc, VX_COMMAND, SET_TX_AVAIL_THRESH | (8188 >> 2)); 480 IF_DEQUEUE(&ifp->if_snd, m); 481 if (m == NULL) /* not really needed */ 482 return; 483 484 VX_BUSY_WAIT; 485 CSR_WRITE_2(sc, VX_COMMAND, SET_TX_START_THRESH | 486 ((len / 4 + sc->vx_tx_start_thresh) >> 2)); 487 488 BPF_MTAP(sc->vx_ifp, m); 489 490 /* 491 * Do the output at splhigh() so that an interrupt from another device 492 * won't cause a FIFO underrun. 493 * 494 * XXX: Can't enforce that anymore. 495 */ 496 497 CSR_WRITE_4(sc, VX_W1_TX_PIO_WR_1, len | TX_INDICATE); 498 499 while (m) { 500 if (m->m_len > 3) 501 bus_space_write_multi_4(sc->vx_bst, sc->vx_bsh, 502 VX_W1_TX_PIO_WR_1, (u_int32_t *)mtod(m, caddr_t), 503 m->m_len / 4); 504 if (m->m_len & 3) 505 bus_space_write_multi_1(sc->vx_bst, sc->vx_bsh, 506 VX_W1_TX_PIO_WR_1, 507 mtod(m, caddr_t) + (m->m_len & ~3), m->m_len & 3); 508 m = m_free(m); 509 } 510 while (pad--) 511 CSR_WRITE_1(sc, VX_W1_TX_PIO_WR_1, 0); /* Padding */ 512 513 ++ifp->if_opackets; 514 ifp->if_timer = 1; 515 516 readcheck: 517 if ((CSR_READ_2(sc, VX_W1_RX_STATUS) & ERR_INCOMPLETE) == 0) { 518 /* We received a complete packet. */ 519 520 if ((CSR_READ_2(sc, VX_STATUS) & S_INTR_LATCH) == 0) { 521 /* 522 * No interrupt, read the packet and continue 523 * Is this supposed to happen? Is my motherboard 524 * completely busted? 525 */ 526 vx_read(sc); 527 } else 528 /* 529 * Got an interrupt, return so that it gets 530 * serviced. 531 */ 532 return; 533 } else { 534 /* Check if we are stuck and reset [see XXX comment] */ 535 if (vx_status(sc)) { 536 if (ifp->if_flags & IFF_DEBUG) 537 if_printf(ifp, "adapter reset\n"); 538 vx_reset(sc); 539 } 540 } 541 542 goto startagain; 543 } 544 545 /* 546 * XXX: The 3c509 card can get in a mode where both the fifo status bit 547 * FIFOS_RX_OVERRUN and the status bit ERR_INCOMPLETE are set 548 * We detect this situation and we reset the adapter. 549 * It happens at times when there is a lot of broadcast traffic 550 * on the cable (once in a blue moon). 551 */ 552 static int 553 vx_status(struct vx_softc *sc) 554 { 555 struct ifnet *ifp; 556 int fifost; 557 558 VX_LOCK_ASSERT(sc); 559 560 /* 561 * Check the FIFO status and act accordingly 562 */ 563 GO_WINDOW(4); 564 fifost = CSR_READ_2(sc, VX_W4_FIFO_DIAG); 565 GO_WINDOW(1); 566 567 ifp = sc->vx_ifp; 568 if (fifost & FIFOS_RX_UNDERRUN) { 569 if (ifp->if_flags & IFF_DEBUG) 570 if_printf(ifp, "RX underrun\n"); 571 vx_reset(sc); 572 return 0; 573 } 574 if (fifost & FIFOS_RX_STATUS_OVERRUN) { 575 if (ifp->if_flags & IFF_DEBUG) 576 if_printf(ifp, "RX Status overrun\n"); 577 return 1; 578 } 579 if (fifost & FIFOS_RX_OVERRUN) { 580 if (ifp->if_flags & IFF_DEBUG) 581 if_printf(ifp, "RX overrun\n"); 582 return 1; 583 } 584 if (fifost & FIFOS_TX_OVERRUN) { 585 if (ifp->if_flags & IFF_DEBUG) 586 if_printf(ifp, "TX overrun\n"); 587 vx_reset(sc); 588 return 0; 589 } 590 return 0; 591 } 592 593 static void 594 vx_txstat(struct vx_softc *sc) 595 { 596 struct ifnet *ifp; 597 int i; 598 599 VX_LOCK_ASSERT(sc); 600 601 /* 602 * We need to read+write TX_STATUS until we get a 0 status 603 * in order to turn off the interrupt flag. 604 */ 605 ifp = sc->vx_ifp; 606 while ((i = CSR_READ_1(sc, VX_W1_TX_STATUS)) & TXS_COMPLETE) { 607 CSR_WRITE_1(sc, VX_W1_TX_STATUS, 0x0); 608 609 if (i & TXS_JABBER) { 610 ++ifp->if_oerrors; 611 if (ifp->if_flags & IFF_DEBUG) 612 if_printf(ifp, "jabber (%x)\n", i); 613 vx_reset(sc); 614 } else if (i & TXS_UNDERRUN) { 615 ++ifp->if_oerrors; 616 if (ifp->if_flags & IFF_DEBUG) 617 if_printf(ifp, "fifo underrun (%x) @%d\n", i, 618 sc->vx_tx_start_thresh); 619 if (sc->vx_tx_succ_ok < 100) 620 sc->vx_tx_start_thresh = 621 min(ETHER_MAX_LEN, 622 sc->vx_tx_start_thresh + 20); 623 sc->vx_tx_succ_ok = 0; 624 vx_reset(sc); 625 } else if (i & TXS_MAX_COLLISION) { 626 ++ifp->if_collisions; 627 CSR_WRITE_2(sc, VX_COMMAND, TX_ENABLE); 628 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 629 } else 630 sc->vx_tx_succ_ok = (sc->vx_tx_succ_ok + 1) & 127; 631 } 632 } 633 634 void 635 vx_intr(void *voidsc) 636 { 637 short status; 638 struct vx_softc *sc = voidsc; 639 struct ifnet *ifp = sc->vx_ifp; 640 641 VX_LOCK(sc); 642 for (;;) { 643 CSR_WRITE_2(sc, VX_COMMAND, C_INTR_LATCH); 644 645 status = CSR_READ_2(sc, VX_STATUS); 646 647 if ((status & (S_TX_COMPLETE | S_TX_AVAIL | 648 S_RX_COMPLETE | S_CARD_FAILURE)) == 0) 649 break; 650 651 /* 652 * Acknowledge any interrupts. It's important that we do this 653 * first, since there would otherwise be a race condition. 654 * Due to the i386 interrupt queueing, we may get spurious 655 * interrupts occasionally. 656 */ 657 CSR_WRITE_2(sc, VX_COMMAND, ACK_INTR | status); 658 659 if (status & S_RX_COMPLETE) 660 vx_read(sc); 661 if (status & S_TX_AVAIL) { 662 ifp->if_timer = 0; 663 sc->vx_ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 664 vx_start_locked(sc->vx_ifp); 665 } 666 if (status & S_CARD_FAILURE) { 667 if_printf(ifp, "adapter failure (%x)\n", status); 668 ifp->if_timer = 0; 669 vx_reset(sc); 670 break; 671 } 672 if (status & S_TX_COMPLETE) { 673 ifp->if_timer = 0; 674 vx_txstat(sc); 675 vx_start_locked(ifp); 676 } 677 } 678 VX_UNLOCK(sc); 679 680 /* no more interrupts */ 681 return; 682 } 683 684 static void 685 vx_read(struct vx_softc *sc) 686 { 687 struct ifnet *ifp = sc->vx_ifp; 688 struct mbuf *m; 689 struct ether_header *eh; 690 u_int len; 691 692 VX_LOCK_ASSERT(sc); 693 len = CSR_READ_2(sc, VX_W1_RX_STATUS); 694 again: 695 696 if (ifp->if_flags & IFF_DEBUG) { 697 int err = len & ERR_MASK; 698 char *s = NULL; 699 700 if (len & ERR_INCOMPLETE) 701 s = "incomplete packet"; 702 else if (err == ERR_OVERRUN) 703 s = "packet overrun"; 704 else if (err == ERR_RUNT) 705 s = "runt packet"; 706 else if (err == ERR_ALIGNMENT) 707 s = "bad alignment"; 708 else if (err == ERR_CRC) 709 s = "bad crc"; 710 else if (err == ERR_OVERSIZE) 711 s = "oversized packet"; 712 else if (err == ERR_DRIBBLE) 713 s = "dribble bits"; 714 715 if (s) 716 if_printf(ifp, "%s\n", s); 717 } 718 if (len & ERR_INCOMPLETE) 719 return; 720 721 if (len & ERR_RX) { 722 ++ifp->if_ierrors; 723 goto abort; 724 } 725 len &= RX_BYTES_MASK; /* Lower 11 bits = RX bytes. */ 726 727 /* Pull packet off interface. */ 728 m = vx_get(sc, len); 729 if (m == 0) { 730 ifp->if_ierrors++; 731 goto abort; 732 } 733 ++ifp->if_ipackets; 734 735 { 736 struct mbuf *m0; 737 738 m0 = m_devget(mtod(m, char *), m->m_pkthdr.len, ETHER_ALIGN, 739 ifp, NULL); 740 if (m0 == NULL) { 741 ifp->if_ierrors++; 742 goto abort; 743 } 744 m_freem(m); 745 m = m0; 746 } 747 748 /* We assume the header fit entirely in one mbuf. */ 749 eh = mtod(m, struct ether_header *); 750 751 /* 752 * XXX: Some cards seem to be in promiscous mode all the time. 753 * we need to make sure we only get our own stuff always. 754 * bleah! 755 */ 756 757 if (!(ifp->if_flags & IFF_PROMISC) 758 && (eh->ether_dhost[0] & 1) == 0 /* !mcast and !bcast */ 759 && bcmp(eh->ether_dhost, IFP2ENADDR(sc->vx_ifp), 760 ETHER_ADDR_LEN) != 0) { 761 m_freem(m); 762 return; 763 } 764 VX_UNLOCK(sc); 765 (*ifp->if_input)(ifp, m); 766 VX_LOCK(sc); 767 768 /* 769 * In periods of high traffic we can actually receive enough 770 * packets so that the fifo overrun bit will be set at this point, 771 * even though we just read a packet. In this case we 772 * are not going to receive any more interrupts. We check for 773 * this condition and read again until the fifo is not full. 774 * We could simplify this test by not using vx_status(), but 775 * rechecking the RX_STATUS register directly. This test could 776 * result in unnecessary looping in cases where there is a new 777 * packet but the fifo is not full, but it will not fix the 778 * stuck behavior. 779 * 780 * Even with this improvement, we still get packet overrun errors 781 * which are hurting performance. Maybe when I get some more time 782 * I'll modify vx_read() so that it can handle RX_EARLY interrupts. 783 */ 784 if (vx_status(sc)) { 785 len = CSR_READ_2(sc, VX_W1_RX_STATUS); 786 /* Check if we are stuck and reset [see XXX comment] */ 787 if (len & ERR_INCOMPLETE) { 788 if (ifp->if_flags & IFF_DEBUG) 789 if_printf(ifp, "adapter reset\n"); 790 vx_reset(sc); 791 return; 792 } 793 goto again; 794 } 795 return; 796 797 abort: 798 CSR_WRITE_2(sc, VX_COMMAND, RX_DISCARD_TOP_PACK); 799 } 800 801 static struct mbuf * 802 vx_get(struct vx_softc *sc, u_int totlen) 803 { 804 struct ifnet *ifp = sc->vx_ifp; 805 struct mbuf *top, **mp, *m; 806 int len; 807 808 VX_LOCK_ASSERT(sc); 809 m = sc->vx_mb[sc->vx_next_mb]; 810 sc->vx_mb[sc->vx_next_mb] = NULL; 811 if (m == NULL) { 812 MGETHDR(m, M_DONTWAIT, MT_DATA); 813 if (m == NULL) 814 return NULL; 815 } else { 816 /* If the queue is no longer full, refill. */ 817 if (sc->vx_last_mb == sc->vx_next_mb && 818 sc->vx_buffill_pending == 0) { 819 callout_reset(&sc->vx_callout, hz / 100, vx_mbuf_fill, 820 sc); 821 sc->vx_buffill_pending = 1; 822 } 823 /* Convert one of our saved mbuf's. */ 824 sc->vx_next_mb = (sc->vx_next_mb + 1) % MAX_MBS; 825 m->m_data = m->m_pktdat; 826 m->m_flags = M_PKTHDR; 827 bzero(&m->m_pkthdr, sizeof(m->m_pkthdr)); 828 } 829 m->m_pkthdr.rcvif = ifp; 830 m->m_pkthdr.len = totlen; 831 len = MHLEN; 832 top = NULL; 833 mp = ⊤ 834 835 /* 836 * We read the packet at splhigh() so that an interrupt from another 837 * device doesn't cause the card's buffer to overflow while we're 838 * reading it. We may still lose packets at other times. 839 * 840 * XXX: Can't enforce this anymore. 841 */ 842 843 /* 844 * Since we don't set allowLargePackets bit in MacControl register, 845 * we can assume that totlen <= 1500bytes. 846 * The while loop will be performed iff we have a packet with 847 * MLEN < m_len < MINCLSIZE. 848 */ 849 while (totlen > 0) { 850 if (top) { 851 m = sc->vx_mb[sc->vx_next_mb]; 852 sc->vx_mb[sc->vx_next_mb] = NULL; 853 if (m == NULL) { 854 MGET(m, M_DONTWAIT, MT_DATA); 855 if (m == NULL) { 856 m_freem(top); 857 return NULL; 858 } 859 } else { 860 sc->vx_next_mb = (sc->vx_next_mb + 1) % MAX_MBS; 861 } 862 len = MLEN; 863 } 864 if (totlen >= MINCLSIZE) { 865 MCLGET(m, M_DONTWAIT); 866 if (m->m_flags & M_EXT) 867 len = MCLBYTES; 868 } 869 len = min(totlen, len); 870 if (len > 3) 871 bus_space_read_multi_4(sc->vx_bst, sc->vx_bsh, 872 VX_W1_RX_PIO_RD_1, mtod(m, u_int32_t *), len / 4); 873 if (len & 3) { 874 bus_space_read_multi_1(sc->vx_bst, sc->vx_bsh, 875 VX_W1_RX_PIO_RD_1, mtod(m, u_int8_t *) + (len & ~3), 876 len & 3); 877 } 878 m->m_len = len; 879 totlen -= len; 880 *mp = m; 881 mp = &m->m_next; 882 } 883 884 CSR_WRITE_2(sc, VX_COMMAND, RX_DISCARD_TOP_PACK); 885 886 return top; 887 } 888 889 890 static int 891 vx_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) 892 { 893 struct vx_softc *sc = ifp->if_softc; 894 struct ifreq *ifr = (struct ifreq *) data; 895 int error = 0; 896 897 switch (cmd) { 898 case SIOCSIFFLAGS: 899 VX_LOCK(sc); 900 if ((ifp->if_flags & IFF_UP) == 0 && 901 (ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) { 902 /* 903 * If interface is marked up and it is stopped, then 904 * start it. 905 */ 906 vx_stop(sc); 907 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 908 } else if ((ifp->if_flags & IFF_UP) != 0 && 909 (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { 910 /* 911 * If interface is marked up and it is stopped, then 912 * start it. 913 */ 914 vx_init_locked(sc); 915 } else { 916 /* 917 * deal with flags changes: 918 * IFF_MULTICAST, IFF_PROMISC, 919 * IFF_LINK0, IFF_LINK1, 920 */ 921 vx_setfilter(sc); 922 vx_setlink(sc); 923 } 924 VX_UNLOCK(sc); 925 break; 926 927 case SIOCSIFMTU: 928 /* 929 * Set the interface MTU. 930 */ 931 VX_LOCK(sc); 932 if (ifr->ifr_mtu > ETHERMTU) { 933 error = EINVAL; 934 } else { 935 ifp->if_mtu = ifr->ifr_mtu; 936 } 937 VX_UNLOCK(sc); 938 break; 939 940 case SIOCADDMULTI: 941 case SIOCDELMULTI: 942 /* 943 * Multicast list has changed; set the hardware filter 944 * accordingly. 945 */ 946 VX_LOCK(sc); 947 vx_reset(sc); 948 VX_UNLOCK(sc); 949 error = 0; 950 break; 951 952 953 default: 954 error = ether_ioctl(ifp, cmd, data); 955 break; 956 } 957 958 return (error); 959 } 960 961 static void 962 vx_reset(struct vx_softc *sc) 963 { 964 965 VX_LOCK_ASSERT(sc); 966 vx_stop(sc); 967 vx_init_locked(sc); 968 } 969 970 static void 971 vx_watchdog(struct ifnet *ifp) 972 { 973 struct vx_softc *sc = ifp->if_softc; 974 975 VX_LOCK(sc); 976 if (ifp->if_flags & IFF_DEBUG) 977 if_printf(ifp, "device timeout\n"); 978 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 979 vx_start_locked(ifp); 980 vx_intr(sc); 981 VX_UNLOCK(sc); 982 } 983 984 void 985 vx_stop(struct vx_softc *sc) 986 { 987 struct ifnet *ifp = sc->vx_ifp; 988 989 VX_LOCK_ASSERT(sc); 990 ifp->if_timer = 0; 991 992 CSR_WRITE_2(sc, VX_COMMAND, RX_DISABLE); 993 CSR_WRITE_2(sc, VX_COMMAND, RX_DISCARD_TOP_PACK); 994 VX_BUSY_WAIT; 995 CSR_WRITE_2(sc, VX_COMMAND, TX_DISABLE); 996 CSR_WRITE_2(sc, VX_COMMAND, STOP_TRANSCEIVER); 997 DELAY(800); 998 CSR_WRITE_2(sc, VX_COMMAND, RX_RESET); 999 VX_BUSY_WAIT; 1000 CSR_WRITE_2(sc, VX_COMMAND, TX_RESET); 1001 VX_BUSY_WAIT; 1002 CSR_WRITE_2(sc, VX_COMMAND, C_INTR_LATCH); 1003 CSR_WRITE_2(sc, VX_COMMAND, SET_RD_0_MASK); 1004 CSR_WRITE_2(sc, VX_COMMAND, SET_INTR_MASK); 1005 CSR_WRITE_2(sc, VX_COMMAND, SET_RX_FILTER); 1006 1007 vx_mbuf_empty(sc); 1008 } 1009 1010 int 1011 vx_busy_eeprom(struct vx_softc *sc) 1012 { 1013 int j, i = 100; 1014 1015 while (i--) { 1016 j = CSR_READ_2(sc, VX_W0_EEPROM_COMMAND); 1017 if (j & EEPROM_BUSY) 1018 DELAY(100); 1019 else 1020 break; 1021 } 1022 if (!i) { 1023 if_printf(sc->vx_ifp, "eeprom failed to come ready\n"); 1024 return (1); 1025 } 1026 return (0); 1027 } 1028 1029 static void 1030 vx_mbuf_fill(void *sp) 1031 { 1032 struct vx_softc *sc = (struct vx_softc *)sp; 1033 int i; 1034 1035 VX_LOCK_ASSERT(sc); 1036 i = sc->vx_last_mb; 1037 do { 1038 if (sc->vx_mb[i] == NULL) 1039 MGET(sc->vx_mb[i], M_DONTWAIT, MT_DATA); 1040 if (sc->vx_mb[i] == NULL) 1041 break; 1042 i = (i + 1) % MAX_MBS; 1043 } while (i != sc->vx_next_mb); 1044 sc->vx_last_mb = i; 1045 /* If the queue was not filled, try again. */ 1046 if (sc->vx_last_mb != sc->vx_next_mb) { 1047 callout_reset(&sc->vx_callout, hz / 100, vx_mbuf_fill, sc); 1048 sc->vx_buffill_pending = 1; 1049 } else { 1050 sc->vx_buffill_pending = 0; 1051 } 1052 } 1053 1054 static void 1055 vx_mbuf_empty(struct vx_softc *sc) 1056 { 1057 int i; 1058 1059 VX_LOCK_ASSERT(sc); 1060 for (i = 0; i < MAX_MBS; i++) { 1061 if (sc->vx_mb[i]) { 1062 m_freem(sc->vx_mb[i]); 1063 sc->vx_mb[i] = NULL; 1064 } 1065 } 1066 sc->vx_last_mb = sc->vx_next_mb = 0; 1067 if (sc->vx_buffill_pending != 0) 1068 callout_stop(&sc->vx_callout); 1069 }
Cache object: e40a775b8347849b243b474c30c2fb85
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]