The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/dev/vx/if_vxreg.h

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*-
    2  * Copyright (c) 1993 Herb Peyerl (hpeyerl@novatel.ca) All rights reserved.
    3  *
    4  * Redistribution and use in source and binary forms, with or without
    5  * modification, are permitted provided that the following conditions are
    6  * met: 1. Redistributions of source code must retain the above copyright
    7  * notice, this list of conditions and the following disclaimer. 2. The name
    8  * of the author may not be used to endorse or promote products derived from
    9  * this software without specific prior written permission
   10  *
   11  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
   12  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
   13  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
   14  * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
   15  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
   16  * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
   17  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
   18  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
   19  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
   20  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   21  *
   22  * $FreeBSD$
   23  */
   24 
   25 /*
   26  * Created from if_epreg.h by Fred Gray (fgray@rice.edu) to support the
   27  * 3c590 family.
   28  */
   29 
   30 /*
   31  * Some global constants
   32  */
   33 
   34 #define TX_INIT_RATE         16
   35 #define TX_INIT_MAX_RATE     64
   36 #define RX_INIT_LATENCY      64
   37 #define RX_INIT_EARLY_THRESH 64
   38 #define MIN_RX_EARLY_THRESHF   16 /* not less than ether_header */
   39 #define MIN_RX_EARLY_THRESHL   4
   40 
   41 #define EEPROMSIZE      0x40
   42 #define MAX_EEPROMBUSY  1000
   43 #define VX_LAST_TAG     0xd7
   44 #define VX_MAX_BOARDS   16
   45 
   46 /*
   47  * Commands to read/write EEPROM trough EEPROM command register (Window 0,
   48  * Offset 0xa)
   49  */
   50 #define EEPROM_CMD_RD    0x0080 /* Read:  Address required (5 bits) */
   51 #define EEPROM_CMD_WR    0x0040 /* Write: Address required (5 bits) */
   52 #define EEPROM_CMD_ERASE 0x00c0 /* Erase: Address required (5 bits) */
   53 #define EEPROM_CMD_EWEN  0x0030 /* Erase/Write Enable: No data required */
   54 
   55 #define EEPROM_BUSY             (1<<15)
   56 #define EEPROM_TST_MODE         (1<<14)
   57 
   58 /*
   59  * Some short functions, worth to let them be a macro
   60  */
   61 #define GO_WINDOW(x)    CSR_WRITE_2(sc, VX_COMMAND, WINDOW_SELECT|(x))
   62 
   63 /**************************************************************************
   64  *                                                                        *
   65  * These define the EEPROM data structure.  They are used in the probe
   66  * function to verify the existence of the adapter after having sent
   67  * the ID_Sequence.
   68  *
   69  **************************************************************************/
   70 
   71 #define EEPROM_NODE_ADDR_0      0x0     /* Word */
   72 #define EEPROM_NODE_ADDR_1      0x1     /* Word */
   73 #define EEPROM_NODE_ADDR_2      0x2     /* Word */
   74 #define EEPROM_PROD_ID          0x3     /* 0x9[0-f]50 */
   75 #define EEPROM_MFG_DATE         0x4     /* Manufacturing date */
   76 #define EEPROM_MFG_DIVSION      0x5     /* Manufacturing division */
   77 #define EEPROM_MFG_PRODUCT      0x6     /* Product code */
   78 #define EEPROM_MFG_ID           0x7     /* 0x6d50 */
   79 #define EEPROM_ADDR_CFG         0x8     /* Base addr */
   80 #define ADDR_CFG_EISA           0x1f
   81 #define ADDR_CFG_MASK           0x1f
   82 #define EEPROM_RESOURCE_CFG     0x9     /* IRQ. Bits 12-15 */
   83 #define EEPROM_OEM_ADDR0        0xa
   84 #define EEPROM_OEM_ADDR1        0xb
   85 #define EEPROM_OEM_ADDR2        0xc
   86 #define EEPROM_SOFTINFO         0xd
   87 #define EEPROM_COMPAT           0xe
   88 #define EEPROM_SOFTINFO2        0xf
   89 #define EEPROM_CAP              0x10
   90 #define CAP_ISA         0x2083
   91 #define CAP_PCMCIA              0x2082
   92 #define EEPROM_INT_CONFIG_0     0x12
   93 #define EEPROM_INT_CONFIG_1     0x13
   94 /* RAM Partition TX FIFO/RX FIFO */
   95 #define ICW1_RAM_PART_MASK      0x03
   96 #define ICW1_RAM_PART_35        0x00    /* 2:5 (only legal if RAM size == 000b
   97                                          * default power-up/reset */
   98 #define ICW1_RAM_PART_13        0x01    /* 1:3 (only legal if RAM size ==
   99                                          * 000b) */
  100 #define ICW1_RAM_PART_11        0x10    /* 1:1           */
  101 #define ICW1_RAM_PART_RESV      0x11    /* Reserved      */
  102 /* ISA Adapter Selection */
  103 #define ICW1_IAS_MASK           0x0c
  104 #define ICW1_IAS_DIS            0x00    /* Both mechanisms disabled (default) */
  105 #define ICW1_IAS_ISA            0x04    /* ISA contention only */
  106 #define ICW1_IAS_PNP            0x08    /* ISA Plug and Play only */
  107 #define ICW1_IAS_BOTH           0x0c    /* Both mechanisms enabled */
  108 
  109 #define EEPROM_CHECKSUM_EL3     0x17
  110 
  111 #define NO_RX_OVN_ANOMALY       (1<<5)
  112 
  113 /**************************************************************************
  114  *                                                                                *
  115  * These are the registers for the 3Com 3c509 and their bit patterns when *
  116  * applicable.  They have been taken out the the "EtherLink III Parallel  *
  117  * Tasking EISA and ISA Technical Reference" "Beta Draft 10/30/92" manual *
  118  * from 3com.                                                             *
  119  *                                                                                *
  120  **************************************************************************/
  121 
  122 #define VX_COMMAND              0x0e    /* Write. BASE+0x0e is always a
  123                                          * command reg. */
  124 #define VX_STATUS               0x0e    /* Read. BASE+0x0e is always status
  125                                          * reg. */
  126 #define VX_WINDOW               0x0f    /* Read. BASE+0x0f is always window
  127                                          * reg. */
  128 /*
  129  * Window 0 registers. Setup.
  130  */
  131 /* Write */
  132 #define VX_W0_EEPROM_DATA       0x0c
  133 #define VX_W0_EEPROM_COMMAND    0x0a
  134 #define VX_W0_RESOURCE_CFG      0x08
  135 #define VX_W0_ADDRESS_CFG       0x06
  136 #define VX_W0_CONFIG_CTRL       0x04
  137         /* Read */
  138 #define VX_W0_PRODUCT_ID        0x02
  139 #define VX_W0_MFG_ID            0x00
  140 
  141 /*
  142  * Window 1 registers. Operating Set.
  143  */
  144 /* Write */
  145 #define VX_W1_TX_PIO_WR_2       0x02
  146 #define VX_W1_TX_PIO_WR_1       0x00
  147 /* Read */
  148 #define VX_W1_FREE_TX           0x0c
  149 #define VX_W1_TX_STATUS         0x0b    /* byte */
  150 #define VX_W1_TIMER             0x0a    /* byte */
  151 #define VX_W1_RX_STATUS         0x08
  152 #define VX_W1_RX_PIO_RD_2       0x02
  153 #define VX_W1_RX_PIO_RD_1       0x00
  154 
  155 /*
  156  * Window 2 registers. Station Address Setup/Read
  157  */
  158 /* Read/Write */
  159 #define VX_W2_ADDR_5            0x05
  160 #define VX_W2_ADDR_4            0x04
  161 #define VX_W2_ADDR_3            0x03
  162 #define VX_W2_ADDR_2            0x02
  163 #define VX_W2_ADDR_1            0x01
  164 #define VX_W2_ADDR_0            0x00
  165 
  166 /*
  167  * Window 3 registers.  FIFO Management.
  168  */
  169 /* Read */
  170 #define VX_W3_INTERNAL_CFG      0x00
  171 #define VX_W3_RESET_OPT         0x08
  172 #define VX_W3_FREE_TX           0x0c
  173 #define VX_W3_FREE_RX           0x0a
  174 
  175 /*
  176  * Window 4 registers. Diagnostics.
  177  */
  178 /* Read/Write */
  179 #define VX_W4_MEDIA_TYPE        0x0a
  180 #define VX_W4_CTRLR_STATUS      0x08
  181 #define VX_W4_NET_DIAG          0x06
  182 #define VX_W4_FIFO_DIAG         0x04
  183 #define VX_W4_HOST_DIAG         0x02
  184 #define VX_W4_TX_DIAG           0x00
  185 
  186 /*
  187  * Window 5 Registers.  Results and Internal status.
  188  */
  189 /* Read */
  190 #define VX_W5_READ_0_MASK       0x0c
  191 #define VX_W5_INTR_MASK         0x0a
  192 #define VX_W5_RX_FILTER         0x08
  193 #define VX_W5_RX_EARLY_THRESH   0x06
  194 #define VX_W5_TX_AVAIL_THRESH   0x02
  195 #define VX_W5_TX_START_THRESH   0x00
  196 
  197 /*
  198  * Window 6 registers. Statistics.
  199  */
  200 /* Read/Write */
  201 #define TX_TOTAL_OK             0x0c
  202 #define RX_TOTAL_OK             0x0a
  203 #define TX_DEFERRALS            0x08
  204 #define RX_FRAMES_OK            0x07
  205 #define TX_FRAMES_OK            0x06
  206 #define RX_OVERRUNS             0x05
  207 #define TX_COLLISIONS           0x04
  208 #define TX_AFTER_1_COLLISION    0x03
  209 #define TX_AFTER_X_COLLISIONS   0x02
  210 #define TX_NO_SQE               0x01
  211 #define TX_CD_LOST              0x00
  212 
  213 /****************************************
  214  *
  215  * Register definitions.
  216  *
  217  ****************************************/
  218 
  219 /*
  220  * Command register. All windows.
  221  *
  222  * 16 bit register.
  223  *     15-11:  5-bit code for command to be executed.
  224  *     10-0:   11-bit arg if any. For commands with no args;
  225  *            this can be set to anything.
  226  */
  227 #define GLOBAL_RESET            (u_short) 0x0000        /* Wait at least 1ms
  228                                                          * after issuing */
  229 #define WINDOW_SELECT           (u_short) (0x1<<11)
  230 #define START_TRANSCEIVER       (u_short) (0x2<<11)     /* Read ADDR_CFG reg to
  231                                                          * determine whether
  232                                                          * this is needed. If
  233                                                          * so; wait 800 uSec
  234                                                          * before using trans-
  235                                                          * ceiver. */
  236 #define RX_DISABLE              (u_short) (0x3<<11)     /* state disabled on
  237                                                          * power-up */
  238 #define RX_ENABLE               (u_short) (0x4<<11)
  239 #define RX_RESET                (u_short) (0x5<<11)
  240 #define RX_DISCARD_TOP_PACK     (u_short) (0x8<<11)
  241 #define TX_ENABLE               (u_short) (0x9<<11)
  242 #define TX_DISABLE              (u_short) (0xa<<11)
  243 #define TX_RESET                (u_short) (0xb<<11)
  244 #define REQ_INTR                (u_short) (0xc<<11)
  245 /*
  246  * The following C_* acknowledge the various interrupts. Some of them don't
  247  * do anything.  See the manual.
  248  */
  249 #define ACK_INTR                (u_short) (0x6800)
  250 #       define C_INTR_LATCH     (u_short) (ACK_INTR|0x1)
  251 #       define C_CARD_FAILURE   (u_short) (ACK_INTR|0x2)
  252 #       define C_TX_COMPLETE    (u_short) (ACK_INTR|0x4)
  253 #       define C_TX_AVAIL       (u_short) (ACK_INTR|0x8)
  254 #       define C_RX_COMPLETE    (u_short) (ACK_INTR|0x10)
  255 #       define C_RX_EARLY       (u_short) (ACK_INTR|0x20)
  256 #       define C_INT_RQD                (u_short) (ACK_INTR|0x40)
  257 #       define C_UPD_STATS      (u_short) (ACK_INTR|0x80)
  258 #define SET_INTR_MASK           (u_short) (0xe<<11)
  259 #define SET_RD_0_MASK           (u_short) (0xf<<11)
  260 #define SET_RX_FILTER           (u_short) (0x10<<11)
  261 #       define FIL_INDIVIDUAL   (u_short) (0x1)
  262 #       define FIL_MULTICAST     (u_short) (0x02)
  263 #       define FIL_BRDCST        (u_short) (0x04)
  264 #       define FIL_PROMISC       (u_short) (0x08)
  265 #define SET_RX_EARLY_THRESH     (u_short) (0x11<<11)
  266 #define SET_TX_AVAIL_THRESH     (u_short) (0x12<<11)
  267 #define SET_TX_START_THRESH     (u_short) (0x13<<11)
  268 #define STATS_ENABLE            (u_short) (0x15<<11)
  269 #define STATS_DISABLE           (u_short) (0x16<<11)
  270 #define STOP_TRANSCEIVER        (u_short) (0x17<<11)
  271 
  272 /*
  273  * Status register. All windows.
  274  *
  275  *     15-13:  Window number(0-7).
  276  *     12:     Command_in_progress.
  277  *     11:     reserved.
  278  *     10:     reserved.
  279  *     9:      reserved.
  280  *     8:      reserved.
  281  *     7:      Update Statistics.
  282  *     6:      Interrupt Requested.
  283  *     5:      RX Early.
  284  *     4:      RX Complete.
  285  *     3:      TX Available.
  286  *     2:      TX Complete.
  287  *     1:      Adapter Failure.
  288  *     0:      Interrupt Latch.
  289  */
  290 #define S_INTR_LATCH            (u_short) (0x1)
  291 #define S_CARD_FAILURE          (u_short) (0x2)
  292 #define S_TX_COMPLETE           (u_short) (0x4)
  293 #define S_TX_AVAIL              (u_short) (0x8)
  294 #define S_RX_COMPLETE           (u_short) (0x10)
  295 #define S_RX_EARLY              (u_short) (0x20)
  296 #define S_INT_RQD               (u_short) (0x40)
  297 #define S_UPD_STATS             (u_short) (0x80)
  298 #define S_COMMAND_IN_PROGRESS   (u_short) (0x1000)
  299 
  300 #define VX_BUSY_WAIT while (CSR_READ_2(sc, VX_STATUS) & S_COMMAND_IN_PROGRESS)
  301 
  302 /* Address Config. Register.    
  303  * Window 0/Port 06
  304  */
  305 
  306 #define ACF_CONNECTOR_BITS      14
  307 #define ACF_CONNECTOR_UTP       0
  308 #define ACF_CONNECTOR_AUI       1
  309 #define ACF_CONNECTOR_BNC       3
  310    
  311 #define INTERNAL_CONNECTOR_BITS 20
  312 #define INTERNAL_CONNECTOR_MASK 0x01700000
  313 
  314 /*
  315  * FIFO Registers. RX Status.
  316  *
  317  *     15:     Incomplete or FIFO empty.
  318  *     14:     1: Error in RX Packet   0: Incomplete or no error.
  319  *     13-11:  Type of error.
  320  *            1000 = Overrun.
  321  *            1011 = Run Packet Error.
  322  *            1100 = Alignment Error.
  323  *            1101 = CRC Error.
  324  *            1001 = Oversize Packet Error (>1514 bytes)
  325  *            0010 = Dribble Bits.
  326  *            (all other error codes, no errors.)
  327  *
  328  *     10-0:   RX Bytes (0-1514)
  329  */
  330 #define ERR_INCOMPLETE  (u_short) (0x8000)
  331 #define ERR_RX          (u_short) (0x4000)
  332 #define ERR_MASK        (u_short) (0x7800)
  333 #define ERR_OVERRUN     (u_short) (0x4000)
  334 #define ERR_RUNT        (u_short) (0x5800)
  335 #define ERR_ALIGNMENT   (u_short) (0x6000)
  336 #define ERR_CRC         (u_short) (0x6800)
  337 #define ERR_OVERSIZE    (u_short) (0x4800)
  338 #define ERR_DRIBBLE     (u_short) (0x1000)
  339 
  340 /*
  341  * TX Status. 
  342  *
  343  *   Reports the transmit status of a completed transmission. Writing this
  344  *   register pops the transmit completion stack.
  345  *
  346  *   Window 1/Port 0x0b.
  347  *
  348  *     7:      Complete
  349  *     6:      Interrupt on successful transmission requested.
  350  *     5:      Jabber Error (TP Only, TX Reset required. )
  351  *     4:      Underrun (TX Reset required. )
  352  *     3:      Maximum Collisions.
  353  *     2:      TX Status Overflow.
  354  *     1-0:    Undefined.
  355  *
  356  */
  357 #define TXS_COMPLETE            0x80
  358 #define TXS_INTR_REQ            0x40
  359 #define TXS_JABBER              0x20
  360 #define TXS_UNDERRUN            0x10
  361 #define TXS_MAX_COLLISION       0x8
  362 #define TXS_STATUS_OVERFLOW     0x4
  363 
  364 #define RS_AUI                  (1<<5)
  365 #define RS_BNC                  (1<<4)
  366 #define RS_UTP                  (1<<3)
  367 #define RS_T4                   (1<<0)
  368 #define RS_TX                   (1<<1)
  369 #define RS_FX                   (1<<2)
  370 #define RS_MII                  (1<<6)
  371 
  372 
  373 /*
  374  * FIFO Status (Window 4)
  375  *
  376  *   Supports FIFO diagnostics
  377  *
  378  *   Window 4/Port 0x04.1
  379  *
  380  *     15:      1=RX receiving (RO). Set when a packet is being received
  381  *              into the RX FIFO.
  382  *     14:      Reserved
  383  *     13:      1=RX underrun (RO). Generates Adapter Failure interrupt.
  384  *              Requires RX Reset or Global Reset command to recover.
  385  *              It is generated when you read past the end of a packet -
  386  *              reading past what has been received so far will give bad
  387  *              data.
  388  *     12:      1=RX status overrun (RO). Set when there are already 8
  389  *              packets in the RX FIFO. While this bit is set, no additional
  390  *              packets are received. Requires no action on the part of
  391  *              the host. The condition is cleared once a packet has been
  392  *              read out of the RX FIFO.
  393  *     11:      1=RX overrun (RO). Set when the RX FIFO is full (there
  394  *              may not be an overrun packet yet). While this bit is set,
  395  *              no additional packets will be received (some additional
  396  *              bytes can still be pending between the wire and the RX
  397  *              FIFO). Requires no action on the part of the host. The
  398  *              condition is cleared once a few bytes have been read out
  399  *              from the RX FIFO.
  400  *     10:      1=TX overrun (RO). Generates adapter failure interrupt.
  401  *              Requires TX Reset or Global Reset command to recover.
  402  *              Disables Transmitter.
  403  *     9-8:     Unassigned.
  404  *     7-0:     Built in self test bits for the RX and TX FIFO's.
  405  */
  406 #define FIFOS_RX_RECEIVING      (u_short) 0x8000
  407 #define FIFOS_RX_UNDERRUN       (u_short) 0x2000
  408 #define FIFOS_RX_STATUS_OVERRUN (u_short) 0x1000
  409 #define FIFOS_RX_OVERRUN        (u_short) 0x0800
  410 #define FIFOS_TX_OVERRUN        (u_short) 0x0400
  411 
  412 /*
  413  * Misc defines for various things.
  414  */
  415 #define TAG_ADAPTER                     0xd0
  416 #define ACTIVATE_ADAPTER_TO_CONFIG      0xff
  417 #define ENABLE_DRQ_IRQ                  0x0001
  418 #define MFG_ID                          0x506d  /* `TCM' */
  419 #define PROD_ID                         0x5090
  420 #define JABBER_GUARD_ENABLE     0x40
  421 #define LINKBEAT_ENABLE         0x80
  422 #define ENABLE_UTP              (JABBER_GUARD_ENABLE | LINKBEAT_ENABLE)
  423 #define DISABLE_UTP             0x0
  424 #define RX_BYTES_MASK           (u_short) (0x07ff)
  425 #define TX_INDICATE             1<<15
  426 
  427 #define VX_IOSIZE       0x20
  428 
  429 #define VX_CONNECTORS 8

Cache object: 656f9fefc941e268178b7daeb981d4be


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.