The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/dev/vx/if_vxreg.h

Version: -  FREEBSD  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-2  -  FREEBSD-11-1  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-4  -  FREEBSD-10-3  -  FREEBSD-10-2  -  FREEBSD-10-1  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-3  -  FREEBSD-9-2  -  FREEBSD-9-1  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-4  -  FREEBSD-8-3  -  FREEBSD-8-2  -  FREEBSD-8-1  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-4  -  FREEBSD-7-3  -  FREEBSD-7-2  -  FREEBSD-7-1  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-4  -  FREEBSD-6-3  -  FREEBSD-6-2  -  FREEBSD-6-1  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-5  -  FREEBSD-5-4  -  FREEBSD-5-3  -  FREEBSD-5-2  -  FREEBSD-5-1  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  linux-2.6  -  linux-2.4.22  -  MK83  -  MK84  -  PLAN9  -  DFBSD  -  NETBSD  -  NETBSD5  -  NETBSD4  -  NETBSD3  -  NETBSD20  -  OPENBSD  -  xnu-517  -  xnu-792  -  xnu-792.6.70  -  xnu-1228  -  xnu-1456.1.26  -  xnu-1699.24.8  -  xnu-2050.18.24  -  OPENSOLARIS  -  minix-3-1-1 
SearchContext: -  none  -  3  -  10 

    1 /*-
    2  * Copyright (c) 1993 Herb Peyerl (hpeyerl@novatel.ca) All rights reserved.
    3  *
    4  * Redistribution and use in source and binary forms, with or without
    5  * modification, are permitted provided that the following conditions are
    6  * met: 1. Redistributions of source code must retain the above copyright
    7  * notice, this list of conditions and the following disclaimer. 2. The name
    8  * of the author may not be used to endorse or promote products derived from
    9  * this software without specific prior written permission
   10  *
   11  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
   12  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
   13  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
   14  * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
   15  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
   16  * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
   17  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
   18  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
   19  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
   20  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   21  *
   22  * $FreeBSD: releng/9.0/sys/dev/vx/if_vxreg.h 218909 2011-02-21 09:01:34Z brucec $
   23  */
   24 
   25 /*
   26  * Created from if_epreg.h by Fred Gray (fgray@rice.edu) to support the
   27  * 3c590 family.
   28  */
   29 
   30 /*
   31  * Some global constants
   32  */
   33 
   34 #define TX_INIT_RATE            16
   35 #define TX_INIT_MAX_RATE        64
   36 #define RX_INIT_LATENCY         64
   37 #define RX_INIT_EARLY_THRESH    64
   38 #define MIN_RX_EARLY_THRESHF    16      /* not less than ether_header */
   39 #define MIN_RX_EARLY_THRESHL    4
   40 
   41 #define EEPROMSIZE      0x40
   42 #define MAX_EEPROMBUSY  1000
   43 #define VX_LAST_TAG     0xd7
   44 #define VX_MAX_BOARDS   16
   45 
   46 /*
   47  * Commands to read/write EEPROM trough EEPROM command register (Window 0,
   48  * Offset 0xa)
   49  */
   50 #define EEPROM_CMD_RD    0x0080 /* Read:  Address required (5 bits) */
   51 #define EEPROM_CMD_WR    0x0040 /* Write: Address required (5 bits) */
   52 #define EEPROM_CMD_ERASE 0x00c0 /* Erase: Address required (5 bits) */
   53 #define EEPROM_CMD_EWEN  0x0030 /* Erase/Write Enable: No data required */
   54 
   55 #define EEPROM_BUSY             (1<<15)
   56 #define EEPROM_TST_MODE         (1<<14)
   57 
   58 /*
   59  * Some short functions, worth to let them be a macro
   60  */
   61 #define GO_WINDOW(x)    CSR_WRITE_2(sc, VX_COMMAND, WINDOW_SELECT|(x))
   62 
   63 /**************************************************************************
   64  *                                                                        *
   65  * These define the EEPROM data structure.  They are used in the probe
   66  * function to verify the existence of the adapter after having sent
   67  * the ID_Sequence.
   68  *
   69  **************************************************************************/
   70 
   71 #define EEPROM_NODE_ADDR_0      0x0     /* Word */
   72 #define EEPROM_NODE_ADDR_1      0x1     /* Word */
   73 #define EEPROM_NODE_ADDR_2      0x2     /* Word */
   74 #define EEPROM_PROD_ID          0x3     /* 0x9[0-f]50 */
   75 #define EEPROM_MFG_DATE         0x4     /* Manufacturing date */
   76 #define EEPROM_MFG_DIVSION      0x5     /* Manufacturing division */
   77 #define EEPROM_MFG_PRODUCT      0x6     /* Product code */
   78 #define EEPROM_MFG_ID           0x7     /* 0x6d50 */
   79 #define EEPROM_ADDR_CFG         0x8     /* Base addr */
   80 #define ADDR_CFG_EISA           0x1f
   81 #define ADDR_CFG_MASK           0x1f
   82 #define EEPROM_RESOURCE_CFG     0x9     /* IRQ. Bits 12-15 */
   83 #define EEPROM_OEM_ADDR0        0xa
   84 #define EEPROM_OEM_ADDR1        0xb
   85 #define EEPROM_OEM_ADDR2        0xc
   86 #define EEPROM_SOFTINFO         0xd
   87 #define EEPROM_COMPAT           0xe
   88 #define EEPROM_SOFTINFO2        0xf
   89 #define EEPROM_CAP              0x10
   90 #define CAP_ISA         0x2083
   91 #define CAP_PCMCIA              0x2082
   92 #define EEPROM_INT_CONFIG_0     0x12
   93 #define EEPROM_INT_CONFIG_1     0x13
   94 /* RAM Partition TX FIFO/RX FIFO */
   95 #define ICW1_RAM_PART_MASK      0x03
   96 #define ICW1_RAM_PART_35        0x00    /* 2:5 (only legal if RAM size == 000b
   97                                          * default power-up/reset */
   98 #define ICW1_RAM_PART_13        0x01    /* 1:3 (only legal if RAM size ==
   99                                          * 000b) */
  100 #define ICW1_RAM_PART_11        0x10    /* 1:1           */
  101 #define ICW1_RAM_PART_RESV      0x11    /* Reserved      */
  102 /* ISA Adapter Selection */
  103 #define ICW1_IAS_MASK           0x0c
  104 #define ICW1_IAS_DIS            0x00    /* Both mechanisms disabled (default) */
  105 #define ICW1_IAS_ISA            0x04    /* ISA contention only */
  106 #define ICW1_IAS_PNP            0x08    /* ISA Plug and Play only */
  107 #define ICW1_IAS_BOTH           0x0c    /* Both mechanisms enabled */
  108 
  109 #define EEPROM_CHECKSUM_EL3     0x17
  110 
  111 #define NO_RX_OVN_ANOMALY       (1<<5)
  112 
  113 /**************************************************************************
  114  * These are the registers for the 3Com 3c509 and their bit patterns when *
  115  * applicable.  They have been taken out the "EtherLink III Parallel  *
  116  * Tasking EISA and ISA Technical Reference" "Beta Draft 10/30/92" manual *
  117  * from 3com.                                                             *
  118  **************************************************************************/
  119 #define VX_COMMAND              0x0e    /* Write. BASE+0x0e is always a
  120                                          * command reg. */
  121 #define VX_STATUS               0x0e    /* Read. BASE+0x0e is always status
  122                                          * reg. */
  123 #define VX_WINDOW               0x0f    /* Read. BASE+0x0f is always window
  124                                          * reg. */
  125 /*
  126  * Window 0 registers. Setup.
  127  */
  128 /* Write */
  129 #define VX_W0_EEPROM_DATA       0x0c
  130 #define VX_W0_EEPROM_COMMAND    0x0a
  131 #define VX_W0_RESOURCE_CFG      0x08
  132 #define VX_W0_ADDRESS_CFG       0x06
  133 #define VX_W0_CONFIG_CTRL       0x04
  134  /* Read */
  135 #define VX_W0_PRODUCT_ID        0x02
  136 #define VX_W0_MFG_ID            0x00
  137 
  138 /*
  139  * Window 1 registers. Operating Set.
  140  */
  141 /* Write */
  142 #define VX_W1_TX_PIO_WR_2       0x02
  143 #define VX_W1_TX_PIO_WR_1       0x00
  144 /* Read */
  145 #define VX_W1_FREE_TX           0x0c
  146 #define VX_W1_TX_STATUS         0x0b    /* byte */
  147 #define VX_W1_TIMER             0x0a    /* byte */
  148 #define VX_W1_RX_STATUS         0x08
  149 #define VX_W1_RX_PIO_RD_2       0x02
  150 #define VX_W1_RX_PIO_RD_1       0x00
  151 
  152 /*
  153  * Window 2 registers. Station Address Setup/Read
  154  */
  155 /* Read/Write */
  156 #define VX_W2_ADDR_5            0x05
  157 #define VX_W2_ADDR_4            0x04
  158 #define VX_W2_ADDR_3            0x03
  159 #define VX_W2_ADDR_2            0x02
  160 #define VX_W2_ADDR_1            0x01
  161 #define VX_W2_ADDR_0            0x00
  162 
  163 /*
  164  * Window 3 registers.  FIFO Management.
  165  */
  166 /* Read */
  167 #define VX_W3_INTERNAL_CFG      0x00
  168 #define VX_W3_RESET_OPT         0x08
  169 #define VX_W3_FREE_TX           0x0c
  170 #define VX_W3_FREE_RX           0x0a
  171 
  172 /*
  173  * Window 4 registers. Diagnostics.
  174  */
  175 /* Read/Write */
  176 #define VX_W4_MEDIA_TYPE        0x0a
  177 #define VX_W4_CTRLR_STATUS      0x08
  178 #define VX_W4_NET_DIAG          0x06
  179 #define VX_W4_FIFO_DIAG         0x04
  180 #define VX_W4_HOST_DIAG         0x02
  181 #define VX_W4_TX_DIAG           0x00
  182 
  183 /*
  184  * Window 5 Registers.  Results and Internal status.
  185  */
  186 /* Read */
  187 #define VX_W5_READ_0_MASK       0x0c
  188 #define VX_W5_INTR_MASK         0x0a
  189 #define VX_W5_RX_FILTER         0x08
  190 #define VX_W5_RX_EARLY_THRESH   0x06
  191 #define VX_W5_TX_AVAIL_THRESH   0x02
  192 #define VX_W5_TX_START_THRESH   0x00
  193 
  194 /*
  195  * Window 6 registers. Statistics.
  196  */
  197 /* Read/Write */
  198 #define TX_TOTAL_OK             0x0c
  199 #define RX_TOTAL_OK             0x0a
  200 #define TX_DEFERRALS            0x08
  201 #define RX_FRAMES_OK            0x07
  202 #define TX_FRAMES_OK            0x06
  203 #define RX_OVERRUNS             0x05
  204 #define TX_COLLISIONS           0x04
  205 #define TX_AFTER_1_COLLISION    0x03
  206 #define TX_AFTER_X_COLLISIONS   0x02
  207 #define TX_NO_SQE               0x01
  208 #define TX_CD_LOST              0x00
  209 
  210 /****************************************
  211  *
  212  * Register definitions.
  213  *
  214  ****************************************/
  215 
  216 /*
  217  * Command register. All windows.
  218  *
  219  * 16 bit register.
  220  *     15-11:  5-bit code for command to be executed.
  221  *     10-0:   11-bit arg if any. For commands with no args;
  222  *            this can be set to anything.
  223  */
  224 #define GLOBAL_RESET            (u_short) 0x0000        /* Wait at least 1ms
  225                                                          * after issuing */
  226 #define WINDOW_SELECT           (u_short) (0x1<<11)
  227 #define START_TRANSCEIVER       (u_short) (0x2<<11)     /* Read ADDR_CFG reg to
  228                                                          * determine whether
  229                                                          * this is needed. If
  230                                                          * so; wait 800 uSec
  231                                                          * before using trans-
  232                                                          * ceiver. */
  233 #define RX_DISABLE              (u_short) (0x3<<11)     /* state disabled on
  234                                                          * power-up */
  235 #define RX_ENABLE               (u_short) (0x4<<11)
  236 #define RX_RESET                (u_short) (0x5<<11)
  237 #define RX_DISCARD_TOP_PACK     (u_short) (0x8<<11)
  238 #define TX_ENABLE               (u_short) (0x9<<11)
  239 #define TX_DISABLE              (u_short) (0xa<<11)
  240 #define TX_RESET                (u_short) (0xb<<11)
  241 #define REQ_INTR                (u_short) (0xc<<11)
  242 /*
  243  * The following C_* acknowledge the various interrupts.
  244  * Some of them don't do anything.  See the manual.
  245  */
  246 #define ACK_INTR                (u_short) (0x6800)
  247 #define C_INTR_LATCH            (u_short) (ACK_INTR|0x1)
  248 #define C_CARD_FAILURE          (u_short) (ACK_INTR|0x2)
  249 #define C_TX_COMPLETE           (u_short) (ACK_INTR|0x4)
  250 #define C_TX_AVAIL              (u_short) (ACK_INTR|0x8)
  251 #define C_RX_COMPLETE           (u_short) (ACK_INTR|0x10)
  252 #define C_RX_EARLY              (u_short) (ACK_INTR|0x20)
  253 #define C_INT_RQD               (u_short) (ACK_INTR|0x40)
  254 #define C_UPD_STATS             (u_short) (ACK_INTR|0x80)
  255 #define SET_INTR_MASK           (u_short) (0xe<<11)
  256 #define SET_RD_0_MASK           (u_short) (0xf<<11)
  257 #define SET_RX_FILTER           (u_short) (0x10<<11)
  258 #define FIL_INDIVIDUAL          (u_short) (0x1)
  259 #define FIL_MULTICAST           (u_short) (0x02)
  260 #define FIL_BRDCST              (u_short) (0x04)
  261 #define FIL_PROMISC             (u_short) (0x08)
  262 #define SET_RX_EARLY_THRESH     (u_short) (0x11<<11)
  263 #define SET_TX_AVAIL_THRESH     (u_short) (0x12<<11)
  264 #define SET_TX_START_THRESH     (u_short) (0x13<<11)
  265 #define STATS_ENABLE            (u_short) (0x15<<11)
  266 #define STATS_DISABLE           (u_short) (0x16<<11)
  267 #define STOP_TRANSCEIVER        (u_short) (0x17<<11)
  268 
  269 /*
  270  * Status register. All windows.
  271  *
  272  *     15-13:  Window number(0-7).
  273  *     12:     Command_in_progress.
  274  *     11:     reserved.
  275  *     10:     reserved.
  276  *     9:      reserved.
  277  *     8:      reserved.
  278  *     7:      Update Statistics.
  279  *     6:      Interrupt Requested.
  280  *     5:      RX Early.
  281  *     4:      RX Complete.
  282  *     3:      TX Available.
  283  *     2:      TX Complete.
  284  *     1:      Adapter Failure.
  285  *     0:      Interrupt Latch.
  286  */
  287 #define S_INTR_LATCH            (u_short) (0x1)
  288 #define S_CARD_FAILURE          (u_short) (0x2)
  289 #define S_TX_COMPLETE           (u_short) (0x4)
  290 #define S_TX_AVAIL              (u_short) (0x8)
  291 #define S_RX_COMPLETE           (u_short) (0x10)
  292 #define S_RX_EARLY              (u_short) (0x20)
  293 #define S_INT_RQD               (u_short) (0x40)
  294 #define S_UPD_STATS             (u_short) (0x80)
  295 #define S_COMMAND_IN_PROGRESS   (u_short) (0x1000)
  296 
  297 #define VX_BUSY_WAIT while (CSR_READ_2(sc, VX_STATUS) & S_COMMAND_IN_PROGRESS)
  298 
  299 /* Address Config. Register.
  300  * Window 0/Port 06
  301  */
  302 
  303 #define ACF_CONNECTOR_BITS      14
  304 #define ACF_CONNECTOR_UTP       0
  305 #define ACF_CONNECTOR_AUI       1
  306 #define ACF_CONNECTOR_BNC       3
  307 
  308 #define INTERNAL_CONNECTOR_BITS 20
  309 #define INTERNAL_CONNECTOR_MASK 0x01700000
  310 
  311 /*
  312  * FIFO Registers. RX Status.
  313  *
  314  *     15:     Incomplete or FIFO empty.
  315  *     14:     1: Error in RX Packet   0: Incomplete or no error.
  316  *     13-11:  Type of error.
  317  *            1000 = Overrun.
  318  *            1011 = Run Packet Error.
  319  *            1100 = Alignment Error.
  320  *            1101 = CRC Error.
  321  *            1001 = Oversize Packet Error (>1514 bytes)
  322  *            0010 = Dribble Bits.
  323  *            (all other error codes, no errors.)
  324  *
  325  *     10-0:   RX Bytes (0-1514)
  326  */
  327 #define ERR_INCOMPLETE  (u_short) (0x8000)
  328 #define ERR_RX          (u_short) (0x4000)
  329 #define ERR_MASK        (u_short) (0x7800)
  330 #define ERR_OVERRUN     (u_short) (0x4000)
  331 #define ERR_RUNT        (u_short) (0x5800)
  332 #define ERR_ALIGNMENT   (u_short) (0x6000)
  333 #define ERR_CRC         (u_short) (0x6800)
  334 #define ERR_OVERSIZE    (u_short) (0x4800)
  335 #define ERR_DRIBBLE     (u_short) (0x1000)
  336 
  337 /*
  338  * TX Status.
  339  *
  340  *   Reports the transmit status of a completed transmission. Writing this
  341  *   register pops the transmit completion stack.
  342  *
  343  *   Window 1/Port 0x0b.
  344  *
  345  *     7:      Complete
  346  *     6:      Interrupt on successful transmission requested.
  347  *     5:      Jabber Error (TP Only, TX Reset required. )
  348  *     4:      Underrun (TX Reset required. )
  349  *     3:      Maximum Collisions.
  350  *     2:      TX Status Overflow.
  351  *     1-0:    Undefined.
  352  *
  353  */
  354 #define TXS_COMPLETE            0x80
  355 #define TXS_INTR_REQ            0x40
  356 #define TXS_JABBER              0x20
  357 #define TXS_UNDERRUN            0x10
  358 #define TXS_MAX_COLLISION       0x8
  359 #define TXS_STATUS_OVERFLOW     0x4
  360 
  361 #define RS_AUI                  (1<<5)
  362 #define RS_BNC                  (1<<4)
  363 #define RS_UTP                  (1<<3)
  364 #define RS_T4                   (1<<0)
  365 #define RS_TX                   (1<<1)
  366 #define RS_FX                   (1<<2)
  367 #define RS_MII                  (1<<6)
  368 
  369 
  370 /*
  371  * FIFO Status (Window 4)
  372  *
  373  *   Supports FIFO diagnostics
  374  *
  375  *   Window 4/Port 0x04.1
  376  *
  377  *     15:      1=RX receiving (RO). Set when a packet is being received
  378  *              into the RX FIFO.
  379  *     14:      Reserved
  380  *     13:      1=RX underrun (RO). Generates Adapter Failure interrupt.
  381  *              Requires RX Reset or Global Reset command to recover.
  382  *              It is generated when you read past the end of a packet -
  383  *              reading past what has been received so far will give bad
  384  *              data.
  385  *     12:      1=RX status overrun (RO). Set when there are already 8
  386  *              packets in the RX FIFO. While this bit is set, no additional
  387  *              packets are received. Requires no action on the part of
  388  *              the host. The condition is cleared once a packet has been
  389  *              read out of the RX FIFO.
  390  *     11:      1=RX overrun (RO). Set when the RX FIFO is full (there
  391  *              may not be an overrun packet yet). While this bit is set,
  392  *              no additional packets will be received (some additional
  393  *              bytes can still be pending between the wire and the RX
  394  *              FIFO). Requires no action on the part of the host. The
  395  *              condition is cleared once a few bytes have been read out
  396  *              from the RX FIFO.
  397  *     10:      1=TX overrun (RO). Generates adapter failure interrupt.
  398  *              Requires TX Reset or Global Reset command to recover.
  399  *              Disables Transmitter.
  400  *     9-8:     Unassigned.
  401  *     7-0:     Built in self test bits for the RX and TX FIFO's.
  402  */
  403 #define FIFOS_RX_RECEIVING      (u_short) 0x8000
  404 #define FIFOS_RX_UNDERRUN       (u_short) 0x2000
  405 #define FIFOS_RX_STATUS_OVERRUN (u_short) 0x1000
  406 #define FIFOS_RX_OVERRUN        (u_short) 0x0800
  407 #define FIFOS_TX_OVERRUN        (u_short) 0x0400
  408 
  409 /*
  410  * Misc defines for various things.
  411  */
  412 #define TAG_ADAPTER                     0xd0
  413 #define ACTIVATE_ADAPTER_TO_CONFIG      0xff
  414 #define ENABLE_DRQ_IRQ                  0x0001
  415 #define MFG_ID                          0x506d  /* `TCM' */
  416 #define PROD_ID                         0x5090
  417 #define JABBER_GUARD_ENABLE             0x40
  418 #define LINKBEAT_ENABLE                 0x80
  419 #define ENABLE_UTP                      (JABBER_GUARD_ENABLE | LINKBEAT_ENABLE)
  420 #define DISABLE_UTP                     0x0
  421 #define RX_BYTES_MASK                   (u_short) (0x07ff)
  422 #define TX_INDICATE                     (1<<15)
  423 
  424 #define VX_IOSIZE                       0x20
  425 
  426 #define VX_CONNECTORS 8

Cache object: 2cc7f1dba5feafe05dfefd7d735d9a90


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.