Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
Version: - FREEBSD - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-2 - FREEBSD-11-1 - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-4 - FREEBSD-10-3 - FREEBSD-10-2 - FREEBSD-10-1 - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-3 - FREEBSD-9-2 - FREEBSD-9-1 - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-4 - FREEBSD-8-3 - FREEBSD-8-2 - FREEBSD-8-1 - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-4 - FREEBSD-7-3 - FREEBSD-7-2 - FREEBSD-7-1 - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-4 - FREEBSD-6-3 - FREEBSD-6-2 - FREEBSD-6-1 - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-5 - FREEBSD-5-4 - FREEBSD-5-3 - FREEBSD-5-2 - FREEBSD-5-1 - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - linux-2.6 - linux-2.4.22 - MK83 - MK84 - PLAN9 - DFBSD - NETBSD - NETBSD5 - NETBSD4 - NETBSD3 - NETBSD20 - OPENBSD - xnu-517 - xnu-792 - xnu-792.6.70 - xnu-1228 - xnu-1456.1.26 - xnu-1699.24.8 - xnu-2050.18.24 - OPENSOLARIS - minix-3-1-1
SearchContext: - none - 3 - 10
1 2 This is my implementation of a new network task 3 for the Minix kernel. I did it initially to handle 4 a 3c501 board (Etherlink), but those board are so 5 unstable that it is not worth using them except for 6 learning how to implement a driver. When I got a 7 3c509b board (Etherlink III) it was easier to 8 write the code to handle them. 9 10 The Minix code in 'dp8390.c' is too specific for the 11 National chip set, so what I did was to remove as 12 much as I needed of the code dependant from the chip 13 and produce a generic task that, I hope, will be able 14 to handle many more cards. 15 16 $Log: README,v $ 17 Revision 1.1 2005/06/29 10:16:46 beng 18 Import of dpeth 3c501/3c509b/.. ethernet driver by 19 Giovanni Falzoni <email@example.com>. 20 21 Revision 1.3 2004/04/14 12:49:07 lsodgf0 22 Changes for porting to Minix 2.0.4 run on BOCHS 23 24 Revision 1.2 2002/03/25 14:16:09 lsodgf0 25 The driver for the NEx000 has been rewritten to be 26 operational with the ACCTON 18xx (an NE1000 clone) 27 The I/O routines for 16 bit cards are still untested.. 28 29 Revision 1.1 2002/02/09 09:35:09 lsodgf0 30 Initial revision 31 The package is not fully tested, i.e. I had only 3Com 32 boards (3c501, 3c503, 3c503/16 and 3c509b) and WD8003. 33 I got also a NE1000 clone but it was not fully 34 operational and I could not appreciate the results. 35 For this reason the changes done to the interface 36 to I/O for 8 and 16 bits are not tested. 37 38 $Id: README,v 1.1 2005/06/29 10:16:46 beng Exp $
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.