qcom-ipq4018-rt-ac58u.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
    2 
    3 #include "qcom-ipq4019.dtsi"
    4 #include "qcom-ipq4019-ethernet.dtsi"
    5 
    6 #include <dt-bindings/gpio/gpio.h>
    7 #include <dt-bindings/input/input.h>
    8 #include <dt-bindings/soc/qcom,tcsr.h>
    9 
   10 / {
   11         model = "ASUS RT-AC58U";
   12         compatible = "asus,rt-ac58u";
   13 
   14         memory {
   15                 device_type = "memory";
   16                 reg = <0x80000000 0x8000000>;
   17         };
   18 
   19         aliases {
   20                 led-boot = &led_power;
   21                 led-failsafe = &led_power;
   22                 led-running = &led_power;
   23                 led-upgrade = &led_power;
   24                 serial0 = &blsp1_uart1;
   25         };
   26 
   27         chosen {
   28                 bootargs-append = " ubi.mtd=UBI_DEV";
   29 //              stdout-path = "serial0:115200n8";
   30                 stdout-path = "serial0";
   31         };
   32 
   33         soc {
   34                 rng@22000 {
   35                         status = "okay";
   36                 };
   37 
   38                 mdio@90000 {
   39                         status = "okay";
   40                 };
   41 
   42                 ess-psgmii@98000 {
   43                         status = "okay";
   44                 };
   45 
   46                 tcsr@1949000 {
   47                         compatible = "qcom,tcsr";
   48                         reg = <0x1949000 0x100>;
   49                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
   50                 };
   51 
   52                 tcsr@194b000 {
   53                         compatible = "qcom,tcsr";
   54                         reg = <0x194b000 0x100>;
   55                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
   56                 };
   57 
   58                 ess_tcsr@1953000 {
   59                         compatible = "qcom,tcsr";
   60                         reg = <0x1953000 0x1000>;
   61                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
   62                 };
   63 
   64                 tcsr@1957000 {
   65                         compatible = "qcom,tcsr";
   66                         reg = <0x1957000 0x100>;
   67                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
   68                 };
   69 
   70                 usb3@8af8800 {
   71                         status = "okay";
   72 
   73                         dwc3@8a00000 {
   74                                 #address-cells = <1>;
   75                                 #size-cells = <0>;
   76 
   77                                 usb3_port1: port@1 {
   78                                         reg = <1>;
   79                                         #trigger-source-cells = <0>;
   80                                 };
   81 
   82                                 usb3_port2: port@2 {
   83                                         reg = <2>;
   84                                         #trigger-source-cells = <0>;
   85                                 };
   86                         };
   87                 };
   88 
   89                 crypto@8e3a000 {
   90                         status = "okay";
   91                 };
   92 
   93                 watchdog@b017000 {
   94                         status = "okay";
   95                 };
   96 
   97                 ess-switch@c000000 {
   98                         status = "okay";
   99                 };
  100 
  101                 edma@c080000 {
  102                         status = "okay";
  103                 };
  104         };
  105 
  106         keys {
  107                 compatible = "gpio-keys";
  108 
  109                 reset {
  110                         label = "reset";
  111                         gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
  112                         linux,code = <KEY_RESTART>;
  113                 };
  114 
  115                 wps {
  116                         label = "wps";
  117                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
  118                         linux,code = <KEY_WPS_BUTTON>;
  119                 };
  120         };
  121 
  122         leds {
  123                 compatible = "gpio-leds";
  124 
  125                 led_power: status {
  126                         label = "blue:status";
  127                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
  128                 };
  129 
  130                 wan {
  131                         label = "blue:wan";
  132                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
  133                 };
  134 
  135                 wlan2G {
  136                         label = "blue:wlan2G";
  137                         gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
  138                         linux,default-trigger = "phy0tpt";
  139                 };
  140 
  141                 wlan5G {
  142                         label = "blue:wlan5G";
  143                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
  144                         linux,default-trigger = "phy1tpt";
  145                 };
  146 
  147                 usb {
  148                         label = "blue:usb";
  149                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
  150                         trigger-sources = <&usb3_port1>, <&usb3_port2>;
  151                         linux,default-trigger = "usbport";
  152                 };
  153 
  154                 lan {
  155                         label = "blue:lan";
  156                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
  157                 };
  158         };
  159 };
  160 
  161 &cryptobam {
  162         status = "okay";
  163 };
  164 
  165 &blsp_dma {
  166         status = "okay";
  167 };
  168 
  169 &tlmm {
  170         serial_pins: serial_pinmux {
  171                 mux {
  172                         pins = "gpio60", "gpio61";
  173                         function = "blsp_uart0";
  174                         bias-disable;
  175                 };
  176         };
  177 
  178         spi_0_pins: spi_0_pinmux {
  179                 mux {
  180                         function = "blsp_spi0";
  181                         pins = "gpio55", "gpio56", "gpio57";
  182                         drive-strength = <12>;
  183                         bias-disable;
  184                 };
  185 
  186                 mux_cs {
  187                         function = "gpio";
  188                         pins = "gpio54", "gpio59";
  189                         drive-strength = <2>;
  190                         bias-disable;
  191                         output-high;
  192                 };
  193         };
  194 };
  195 
  196 &blsp1_spi1 { /* BLSP1 QUP1 */
  197         pinctrl-0 = <&spi_0_pins>;
  198         pinctrl-names = "default";
  199         status = "okay";
  200         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
  201                    <&tlmm 59 GPIO_ACTIVE_HIGH>;
  202 
  203         flash@0 {
  204                 /*
  205                  * U-boot looks for "n25q128a11" node,
  206                  * if we don't have it, it will spit out the following warning:
  207                  * "ipq: fdt fixup unable to find compatible node".
  208                  */
  209                 compatible = "jedec,spi-nor";
  210                 reg = <0>;
  211                 linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
  212                 spi-max-frequency = <30000000>;
  213 
  214                 partitions {
  215                         compatible = "fixed-partitions";
  216                         #address-cells = <1>;
  217                         #size-cells = <1>;
  218 
  219                         partition@0 {
  220                                 label = "SBL1";
  221                                 reg = <0x00000000 0x00040000>;
  222                                 read-only;
  223                         };
  224                         partition@40000 {
  225                                 label = "MIBIB";
  226                                 reg = <0x00040000 0x00020000>;
  227                                 read-only;
  228                         };
  229                         partition@60000 {
  230                                 label = "QSEE";
  231                                 reg = <0x00060000 0x00060000>;
  232                                 read-only;
  233                         };
  234                         partition@c0000 {
  235                                 label = "CDT";
  236                                 reg = <0x000c0000 0x00010000>;
  237                                 read-only;
  238                         };
  239                         partition@d0000 {
  240                                 label = "DDRPARAMS";
  241                                 reg = <0x000d0000 0x00010000>;
  242                                 read-only;
  243                         };
  244                         partition@e0000 {
  245                                 label = "APPSBLENV"; /* uboot env*/
  246                                 reg = <0x000e0000 0x00010000>;
  247                                 read-only;
  248                         };
  249                         partition@f0000 {
  250                                 label = "APPSBL"; /* uboot */
  251                                 reg = <0x000f0000 0x00080000>;
  252                                 read-only;
  253                         };
  254                         partition@170000 {
  255                                 label = "ART";
  256                                 reg = <0x00170000 0x00010000>;
  257                                 read-only;
  258                         };
  259                         /* 0x00180000 - 0x00200000 unused */
  260                 };
  261         };
  262 
  263         spi-nand@1 {
  264                 compatible = "spi-nand";
  265                 reg = <1>;
  266                 spi-max-frequency = <30000000>;
  267 
  268                 /*
  269                  * U-boot looks for "spinand,mt29f" node,
  270                  * if we don't have it, it will spit out the following warning:
  271                  * "ipq: fdt fixup unable to find compatible node".
  272                  */
  273 
  274                 partitions {
  275                         compatible = "fixed-partitions";
  276                         #address-cells = <1>;
  277                         #size-cells = <1>;
  278 
  279                         partition@0 {
  280                                 /*
  281                                  * TODO: change to label = "ubi" once we drop 4.14.
  282                                  *       also drop the bootargs-append and all the
  283                                  *       userspace CI_UBIPART="UBI_DEV" remains.
  284                                  */
  285                                 label = "UBI_DEV";
  286                                 reg = <0x00000000 0x08000000>;
  287                         };
  288                 };
  289         };
  290 };
  291 
  292 &blsp1_uart1 {
  293         pinctrl-0 = <&serial_pins>;
  294         pinctrl-names = "default";
  295         status = "okay";
  296 };
  297 
  298 &usb3_ss_phy {
  299         status = "okay";
  300 };
  301 
  302 &usb3_hs_phy {
  303         status = "okay";
  304 };
  305 
  306 &wifi0 {
  307         status = "okay";
  308         qcom,ath10k-calibration-variant = "RT-AC58U";
  309 };
  310 
  311 &wifi1 {
  312         status = "okay";
  313         qcom,ath10k-calibration-variant = "RT-AC58U";
  314 };
Cache object: 6599cce894690b555d7789717fb1dd2a
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/dts/arm/qcom-ipq4018-rt-ac58u.dts

FreeBSD/Linux Kernel Cross Reference
sys/dts/arm/qcom-ipq4018-rt-ac58u.dts
