vsatv102-m6.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 /*-
    2  * Copyright (c) 2013-2015 John Wehle <john@feith.com>
    3  * All rights reserved.
    4  *
    5  * Redistribution and use in source and binary forms, with or without
    6  * modification, are permitted provided that the following conditions
    7  * are met:
    8  * 1. Redistributions of source code must retain the above copyright
    9  *    notice, this list of conditions and the following disclaimer.
   10  * 2. Redistributions in binary form must reproduce the above copyright
   11  *    notice, this list of conditions and the following disclaimer in the
   12  *    documentation and/or other materials provided with the distribution.
   13  *
   14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
   15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   17  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
   18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
   20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
   21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
   23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
   24  * SUCH DAMAGE.
   25  *
   26  * $FreeBSD$
   27  */
   28 
   29 /*
   30  * The ordering of certain devices is significant (e.g. usb depends on
   31  * usb-phy which depends on gpio, also the timer should appear early on
   32  * to provide a reasonably accurate DELAY implementation).
   33  *
   34  * Both usb-phys devices must be configured to prevent the usb controller
   35  * from hanging during initialization.
   36  */
   37 
   38 /dts-v1/;
   39 
   40 /memreserve/ 0x84900000 0x00600000;                     /* 6MB frame buffer */
   41 
   42 #include "meson6.dtsi"
   43 
   44 / {
   45         /*
   46          * My development unit visually appears to be a Visson ATV-102
   47          * and the specs for both my unit and the Visson ATV-102 say
   48          * the SoC is an aml8726-m3.  However the uboot prompt says
   49          * m6_mbx_v1, the RTC is located on SECBUS2 instead of AOBUS,
   50          * and there are two cores so it seems my unit is a newer
   51          * version using the later processor.
   52          */
   53 
   54         model = "visson,atv-102";
   55         compatible = "visson,atv-102", "amlogic,meson6";
   56 
   57         #address-cells = <1>;
   58         #size-cells = <1>;
   59 
   60         aliases {
   61                 soc = &soc;
   62                 screen = &screen;
   63                 uart0 = &uart_AO;
   64         };
   65 
   66         memory {
   67                 device_type = "memory";
   68                 reg = <0x80000000 0x40000000>;          /* 1GB RAM */
   69         };
   70 
   71         soc: soc {
   72                 device_type = "soc";
   73                 bus-frequency = <0>;
   74 
   75                 pic: pic@c1109a40 {
   76                         device_type = "interrupt-controller";
   77                         compatible = "amlogic,aml8726-pic";
   78                         reg = <0xc1109a40 128>; /* cbus 0x2690 */
   79 
   80                         interrupt-controller;
   81                         #interrupt-cells = <3>;
   82                 };
   83 
   84                 scu: scu@c4300000 {
   85                         compatible = "arm,cortex-a9-scu";
   86                         reg = <0xc4300000 0x1000>;
   87                 };
   88 
   89                 cpuconfig: cpuconfig@d901ff80 {
   90                         compatible = "amlogic,aml8726-cpuconfig";
   91                         reg = <0xd901ff80 8>;
   92                 };
   93 
   94                 ccm@c1104140 {
   95                         compatible = "amlogic,aml8726-ccm";
   96                         reg = <0xc1104140 20>;  /* cbus 0x1050 */
   97 
   98                         functions = "ethernet", "i2c", "rng", "sdio",
   99                                     "uart-a", "uart-b", "uart-c",
  100                                     "usb-a", "usb-b";
  101                 };
  102 
  103                 pinctrl: pinctrl@c11080b0 {
  104                         compatible = "amlogic,aml8726-pinctrl";
  105                         reg = <0xc11080b0 40>,  /* mux */
  106                               <0xc11080e8 24>,  /* pu/pd */
  107                               <0xc11080e8 24>,  /* pull enable */
  108                               <0xc8100014 4>,   /* ao mux */
  109                               <0xc810002c 4>,   /* ao pu/pd */
  110                               <0xc810002c 4>;   /* ao pull enable */
  111 
  112                         /*
  113                          * Currently only pin muxing that deviates
  114                          * from the power on default of gpio is
  115                          * specified here.
  116                          */
  117 
  118                         pinctrl-names = "default";
  119                         pinctrl-0 = <&pins_uartao &pins_ethernet &pins_hdmi>;
  120 
  121                         pins_ethernet: ethernet {
  122                                 amlogic,pins = "ref_clk_in",
  123                                                "tx_clk", "tx_en",
  124                                                "tx_d0",  "tx_d1",
  125                                                "tx_d2",  "tx_d3",
  126                                                "rx_clk", "rx_dv",
  127                                                "rx_d0",  "rx_d1",
  128                                                "rx_d2",  "rx_d3",
  129                                                "mdc",    "mdio";
  130                                 amlogic,function = "ethernet";
  131                         };
  132 
  133                         pins_hdmi: hdmi {
  134                                 amlogic,pins = "cec", "hpd",
  135                                                "scl", "sda";
  136                                 amlogic,function = "hdmi";
  137                         };
  138 
  139                         pins_sdio_b: sdio_b {
  140                                 amlogic,pins = "clk", "cmd",
  141                                                "d0",  "d1",
  142                                                "d2",  "d3";
  143                                 amlogic,function = "sdio-b";
  144                         };
  145 
  146                         pins_uartao: uartao {
  147                                 amlogic,pins = "tx", "rx";
  148                                 amlogic,function = "uart-ao";
  149                         };
  150                 };
  151 
  152                 rtc@da004340 {
  153                         compatible = "amlogic,aml8726-rtc";
  154                         reg = <0xda004340 20>;  /* secbus2 0xd0 */
  155                         interrupts = <0 72 1>;  /* AM_IRQ2(8) */
  156                 };
  157 
  158                 clkmsr: clkmsr@c1108758 {
  159                         compatible = "amlogic,aml8726-clkmsr";
  160                         reg = <0xc1108758 16>;  /* cbus 0x21d6 */
  161 
  162                         clocks = <&clk81>;
  163                 };
  164 
  165                 gpioao: gpio@c8100024 {
  166                         /* gpio unit 7 */
  167                         compatible = "amlogic,aml8726-gpio";
  168                         reg = <0xc8100024 4>,   /* oen aobus 0x9 */
  169                               <0xc8100024 4>,   /* out */
  170                               <0xc8100028 4>;   /* in */
  171 
  172                         gpio-controller;
  173                         #gpio-cells = <1>;
  174                         pin-count = <12>;
  175                 };
  176 
  177                 gpio5: gpio@c110806c {
  178                         compatible = "amlogic,aml8726-gpio";
  179                         reg = <0xc110806c 4>,   /* oen cbus 0x201b */
  180                               <0xc1108070 4>,   /* out */
  181                               <0xc1108074 4>;   /* in */
  182 
  183                         gpio-controller;
  184                         #gpio-cells = <1>;
  185                         pin-count = <32>;
  186                 };
  187 
  188                 gpio6: gpio@c1108020 {
  189                         compatible = "amlogic,aml8726-gpio";
  190                         reg = <0xc1108020 4>,   /* oen cbus 0x2008 */
  191                               <0xc1108024 4>,   /* out */
  192                               <0xc1108028 4>;   /* in */
  193 
  194                         gpio-controller;
  195                         #gpio-cells = <1>;
  196                         pin-count = <29>;
  197                 };
  198 
  199                 mmc@c1108c20 {
  200                         compatible = "amlogic,aml8726-mmc";
  201                         reg = <0xc1108c20 32>;  /* cbus 0x2308 */
  202                         interrupts = <0 28 1>;  /* AM_IRQ0(28) */
  203 
  204                         clocks = <&clk81>;
  205 
  206                         pinctrl-names = "default";
  207                         pinctrl-0 = <&pins_sdio_b>;
  208 
  209                         mmc-voltages = "3.3";
  210 
  211                         mmc-pwr-en = <&gpio5 31 0>;     /* card_8 */
  212                         ins-detect = <&gpio5 29 0>;     /* card_6 */
  213                 };
  214 
  215                 rng@c1108100 {
  216                         compatible = "amlogic,aml8726-rng";
  217                         reg = <0xc1108100 8>;   /* cbus 0x2040 */
  218                 };
  219 
  220                 usb-phy@c1108400 {
  221                         /* usb-a phy */
  222                         compatible = "amlogic,aml8726-m6-usb-phy";
  223                         reg = <0xc1108400 32>;  /* cbus 0x2100 */
  224                 };
  225 
  226                 usb-phy@c1108420 {
  227                         /* usb-b phy */
  228                         compatible = "amlogic,aml8726-m6-usb-phy";
  229                         reg = <0xc1108420 32>;  /* cbus 0x2108 */
  230 
  231                         usb-pwr-en = <&gpioao 3 1>,     /* gpioao_3 vbus */
  232                                      <&gpio6 11 0>;     /* gpioe_11 wifi */
  233                 };
  234 
  235                 usb@c9040000 {
  236                         /* usb-a */
  237                         compatible = "synopsys,designware-hs-otg2";
  238                         reg = <0xc9040000 0x40000>;     /* ahbbus 0x40000*/
  239                         interrupts = <0 30 4>;          /* AM_IRQ0(30) */
  240                         #address-cells = <1>;
  241                         #size-cells = <0>;
  242                 };
  243 
  244                 usb@c90c0000 {
  245                         /* usb-b */
  246                         compatible = "synopsys,designware-hs-otg2";
  247                         reg = <0xc90c0000 0x40000>;     /* ahbbus 0xc0000 */
  248                         interrupts = <0 31 4>;          /* AM_IRQ0(31) */
  249                         #address-cells = <1>;
  250                         #size-cells = <0>;
  251 
  252                         dr_mode = "host";
  253                 };
  254 
  255                 eth@c9410000 {
  256                         /* ethernet */
  257                         compatible = "snps,dwmac";
  258                         reg = <0xc9410000 0x2000>;      /* ahbbus 0x410000 */
  259                         interrupts = <0 8 1>;           /* AM_IRQ0(8) */
  260                         #address-cells = <1>;
  261                         #size-cells = <0>;
  262 
  263                         eth-phy-rst = <&gpio5 15 0>;    /* gpioy_15 phy-rst */
  264                 };
  265 
  266                 screen: fb@c8006324 {
  267                         device_type = "display";
  268                         compatible = "amlogic,aml8726-fb";
  269                         reg = <0xc8006324 12>,          /* CANVAS */
  270                               <0xc1106800 1024>,        /* VIU */
  271                               <0xc1107400 1024>;        /* VPP */
  272                         interrupts = <0 2 1>,           /* AM_IRQ0(2) */
  273                                      <0 3 1>,           /* AM_IRQ0(3) */
  274                                      <0 12 1>,          /* AM_IRQ0(12) */
  275                                      <0 13 1>;          /* AM_IRQ0(13) */
  276 
  277                         address = <0x84900000>; /* match memreserve */
  278                         width = <720>;
  279                         height = <480>;
  280                         depth = <24>;
  281                         linebytes = <2160>;
  282                 };
  283         };
  284 
  285         leds {
  286                 compatible = "gpio-leds";
  287 
  288                 sys_led {
  289                         gpios = <&gpioao 2>;    /* gpioao_2 sys_led */
  290                         label = "sys_led";
  291 
  292                         default-state = "on";
  293                 };
  294         };
  295 
  296         chosen {
  297                 stdin = "uart0";
  298                 stdout = "uart0";
  299         };
  300 };
  301 
  302 &clk81 {
  303         clock-frequency = <0>;
  304 };
  305 
  306 &uart_AO {
  307         status = "okay";
  308         current-speed = <115200>;
  309 };
Cache object: 410bb1625526bf25c35dd6506d57c9a2
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/dts/arm/vsatv102-m6.dts

FreeBSD/Linux Kernel Cross Reference
sys/dts/arm/vsatv102-m6.dts
