FreeBSD/Linux Kernel Cross Reference
sys/i386/i386/geode.c
1 /*-
2 * Copyright (c) 2003-2004 Poul-Henning Kamp
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 */
26
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD: releng/6.3/sys/i386/i386/geode.c 173886 2007-11-24 19:45:58Z cvs2svn $");
29
30 #include <sys/param.h>
31 #include <sys/systm.h>
32 #include <sys/timetc.h>
33 #include <sys/bus.h>
34 #include <sys/kernel.h>
35 #include <sys/module.h>
36 #include <sys/watchdog.h>
37 #include <dev/pci/pcireg.h>
38 #include <dev/pci/pcivar.h>
39 #include <dev/led/led.h>
40 #include <machine/pc/bios.h>
41
42 static struct bios_oem bios_soekris = {
43 { 0xf0000, 0xf1000 },
44 {
45 { "Soekris", 0, 8 }, /* Soekris Engineering. */
46 { "net4", 0, 8 }, /* net45xx */
47 { "comBIOS", 0, 54 }, /* comBIOS ver. 1.26a 20040819 ... */
48 { NULL, 0, 0 },
49 }
50 };
51
52 static struct bios_oem bios_soekris_55 = {
53 { 0xf0000, 0xf1000 },
54 {
55 { "Soekris", 0, 8 }, /* Soekris Engineering. */
56 { "net5", 0, 8 }, /* net5xxx */
57 { "comBIOS", 0, 54 }, /* comBIOS ver. 1.26a 20040819 ... */
58 { NULL, 0, 0 },
59 }
60 };
61
62 static struct bios_oem bios_pcengines = {
63 { 0xf9000, 0xfa000 },
64 {
65 { "PC Engines WRAP", 0, 28 }, /* PC Engines WRAP.1C v1.03 */
66 { "tinyBIOS", 0, 28 }, /* tinyBIOS V1.4a (C)1997-2003 */
67 { NULL, 0, 0 },
68 }
69 };
70
71 static struct bios_oem bios_advantech = {
72 { 0xfe000, 0xff000 },
73 {
74 { "**** PCM-582", 5, 33 }, /* PCM-5823 BIOS V1.12 ... */
75 { "GXm-Cx5530", -11, 35 }, /* 06/07/2002-GXm-Cx5530... */
76 { NULL, 0, 0 },
77 }
78 };
79
80 static unsigned cba;
81 static unsigned gpio;
82 static unsigned geode_counter;
83
84 static struct cdev *led1, *led2, *led3;
85 static int led1b, led2b, led3b;
86
87 static void
88 led_func(void *ptr, int onoff)
89 {
90 uint32_t u;
91 int bit;
92
93 bit = *(int *)ptr;
94 if (bit < 0) {
95 bit = -bit;
96 onoff = !onoff;
97 }
98
99 u = inl(gpio + 4);
100 if (onoff)
101 u |= 1 << bit;
102 else
103 u &= ~(1 << bit);
104 outl(gpio, u);
105 }
106
107 static void
108 cs5536_led_func(void *ptr, int onoff)
109 {
110 int bit;
111 uint16_t a;
112
113 bit = *(int *)ptr;
114 if (bit < 0) {
115 bit = -bit;
116 onoff = !onoff;
117 }
118
119 a = rdmsr(0x5140000c);
120 if (onoff)
121 outl(a, 1 << bit);
122 else
123 outl(a, 1 << (bit + 16));
124 }
125
126
127 static unsigned
128 geode_get_timecount(struct timecounter *tc)
129 {
130 return (inl(geode_counter));
131 }
132
133 static struct timecounter geode_timecounter = {
134 geode_get_timecount,
135 NULL,
136 0xffffffff,
137 27000000,
138 "Geode",
139 1000
140 };
141
142 /*
143 * The GEODE watchdog runs from a 32kHz frequency. One period of that is
144 * 31250 nanoseconds which we round down to 2^14 nanoseconds. The watchdog
145 * consists of a power-of-two prescaler and a 16 bit counter, so the math
146 * is quite simple. The max timeout is 14 + 16 + 13 = 2^43 nsec ~= 2h26m.
147 */
148 static void
149 geode_watchdog(void *foo __unused, u_int cmd, int *error)
150 {
151 u_int u, p, r;
152
153 u = cmd & WD_INTERVAL;
154 if (u >= 14 && u <= 43) {
155 u -= 14;
156 if (u > 16) {
157 p = u - 16;
158 u -= p;
159 } else {
160 p = 0;
161 }
162 if (u == 16)
163 u = (1 << u) - 1;
164 else
165 u = 1 << u;
166 r = inw(cba + 2) & 0xff00;
167 outw(cba + 2, p | 0xf0 | r);
168 outw(cba, u);
169 *error = 0;
170 } else {
171 outw(cba, 0);
172 }
173 }
174
175 /*
176 * We run MFGPT0 off the 32kHz frequency and prescale by 16384 giving a
177 * period of half a second.
178 * Range becomes 2^30 (= 1 sec) to 2^44 (almost 5 hours)
179 */
180 static void
181 cs5536_watchdog(void *foo __unused, u_int cmd, int *error)
182 {
183 u_int u, p;
184 uint16_t a;
185 uint32_t m;
186
187 a = rdmsr(0x5140000d);
188 m = rdmsr(0x51400029);
189 m &= ~(1 << 24);
190 wrmsr(0x51400029, m);
191
192 u = cmd & WD_INTERVAL;
193 if (u >= 30 && u <= 44) {
194 p = 1 << (u - 29);
195
196 /* Set up MFGPT0, 32khz, prescaler 16k, C2 event */
197 outw(a + 6, 0x030e);
198 /* set comparator 2 */
199 outw(a + 2, p);
200 /* reset counter */
201 outw(a + 4, 0);
202 /* Arm reset mechanism */
203 m |= (1 << 24);
204 wrmsr(0x51400029, m);
205 /* Start counter */
206 outw(a + 6, 0x8000);
207
208 *error = 0;
209 }
210 }
211
212 /*
213 * The Advantech PCM-582x watchdog expects 0x1 at I/O port 0x0443
214 * every 1.6 secs +/- 30%. Writing 0x0 disables the watchdog
215 * NB: reading the I/O port enables the timer as well
216 */
217 static void
218 advantech_watchdog(void *foo __unused, u_int cmd, int *error)
219 {
220 u_int u;
221
222 u = cmd & WD_INTERVAL;
223 if (u > 0 && u <= WD_TO_1SEC) {
224 outb(0x0443, 1);
225 *error = 0;
226 } else {
227 outb(0x0443, 0);
228 }
229 }
230
231 static int
232 geode_probe(device_t self)
233 {
234 #define BIOS_OEM_MAXLEN 80
235 static u_char bios_oem[BIOS_OEM_MAXLEN] = "\0";
236
237 switch (pci_get_devid(self)) {
238 case 0x0515100b:
239 if (geode_counter == 0) {
240 /*
241 * The address of the CBA is written to this register
242 * by the bios, see p161 in data sheet.
243 */
244 cba = pci_read_config(self, 0x64, 4);
245 printf("Geode CBA@ 0x%x\n", cba);
246 geode_counter = cba + 0x08;
247 outl(cba + 0x0d, 2);
248 printf("Geode rev: %02x %02x\n",
249 inb(cba + 0x3c), inb(cba + 0x3d));
250 tc_init(&geode_timecounter);
251 EVENTHANDLER_REGISTER(watchdog_list, geode_watchdog,
252 NULL, 0);
253 }
254 break;
255 case 0x0510100b:
256 gpio = pci_read_config(self, PCIR_BAR(0), 4);
257 gpio &= ~0x1f;
258 printf("Geode GPIO@ = %x\n", gpio);
259 if ( bios_oem_strings(&bios_soekris,
260 bios_oem, BIOS_OEM_MAXLEN) > 0 ) {
261 led1b = 20;
262 led1 = led_create(led_func, &led1b, "error");
263 } else if ( bios_oem_strings(&bios_pcengines,
264 bios_oem, BIOS_OEM_MAXLEN) > 0 ) {
265 led1b = -2;
266 led2b = -3;
267 led3b = -18;
268 led1 = led_create(led_func, &led1b, "led1");
269 led2 = led_create(led_func, &led2b, "led2");
270 led3 = led_create(led_func, &led3b, "led3");
271 /*
272 * Turn on first LED so we don't make
273 * people think their box just died.
274 */
275 led_func(&led1b, 1);
276 }
277 if ( strlen(bios_oem) )
278 printf("Geode %s\n", bios_oem);
279 break;
280 case 0x01011078:
281 if ( bios_oem_strings(&bios_advantech,
282 bios_oem, BIOS_OEM_MAXLEN) > 0 ) {
283 printf("Geode %s\n", bios_oem);
284 EVENTHANDLER_REGISTER(watchdog_list, advantech_watchdog,
285 NULL, 0);
286 }
287 break;
288 case 0x20801022:
289 if ( bios_oem_strings(&bios_soekris_55,
290 bios_oem, BIOS_OEM_MAXLEN) > 0 ) {
291 printf("Geode LX: %s\n", bios_oem);
292 led1b = 6;
293 led1 = led_create(cs5536_led_func, &led1b, "error");
294 }
295 printf("MFGPT bar: %jx\n", rdmsr(0x5140000d));
296 EVENTHANDLER_REGISTER(watchdog_list, cs5536_watchdog,
297 NULL, 0);
298 break;
299 }
300 return (ENXIO);
301 }
302
303 static int
304 geode_attach(device_t self)
305 {
306
307 return(ENODEV);
308 }
309
310 static device_method_t geode_methods[] = {
311 /* Device interface */
312 DEVMETHOD(device_probe, geode_probe),
313 DEVMETHOD(device_attach, geode_attach),
314 DEVMETHOD(device_suspend, bus_generic_suspend),
315 DEVMETHOD(device_resume, bus_generic_resume),
316 DEVMETHOD(device_shutdown, bus_generic_shutdown),
317 {0, 0}
318 };
319
320 static driver_t geode_driver = {
321 "geode",
322 geode_methods,
323 0,
324 };
325
326 static devclass_t geode_devclass;
327
328 DRIVER_MODULE(geode, pci, geode_driver, geode_devclass, 0, 0);
Cache object: fbd6a90cebd5db0ce3fd5918772dc1fd
|