The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/i386/i386/mp_machdep.c

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*-
    2  * Copyright (c) 1996, by Steve Passe
    3  * All rights reserved.
    4  *
    5  * Redistribution and use in source and binary forms, with or without
    6  * modification, are permitted provided that the following conditions
    7  * are met:
    8  * 1. Redistributions of source code must retain the above copyright
    9  *    notice, this list of conditions and the following disclaimer.
   10  * 2. The name of the developer may NOT be used to endorse or promote products
   11  *    derived from this software without specific prior written permission.
   12  *
   13  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
   14  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   15  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   16  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
   17  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   18  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
   19  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
   20  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   21  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
   22  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
   23  * SUCH DAMAGE.
   24  */
   25 
   26 #include <sys/cdefs.h>
   27 __FBSDID("$FreeBSD: releng/7.4/sys/i386/i386/mp_machdep.c 205707 2010-03-26 18:54:46Z jhb $");
   28 
   29 #include "opt_apic.h"
   30 #include "opt_cpu.h"
   31 #include "opt_kstack_pages.h"
   32 #include "opt_mp_watchdog.h"
   33 #include "opt_pmap.h"
   34 #include "opt_sched.h"
   35 #include "opt_smp.h"
   36 
   37 #if !defined(lint)
   38 #if !defined(SMP)
   39 #error How did you get here?
   40 #endif
   41 
   42 #ifndef DEV_APIC
   43 #error The apic device is required for SMP, add "device apic" to your config file.
   44 #endif
   45 #if defined(CPU_DISABLE_CMPXCHG) && !defined(COMPILING_LINT)
   46 #error SMP not supported with CPU_DISABLE_CMPXCHG
   47 #endif
   48 #endif /* not lint */
   49 
   50 #include <sys/param.h>
   51 #include <sys/systm.h>
   52 #include <sys/bus.h>
   53 #include <sys/cons.h>   /* cngetc() */
   54 #ifdef GPROF 
   55 #include <sys/gmon.h>
   56 #endif
   57 #include <sys/kernel.h>
   58 #include <sys/ktr.h>
   59 #include <sys/lock.h>
   60 #include <sys/malloc.h>
   61 #include <sys/memrange.h>
   62 #include <sys/mutex.h>
   63 #include <sys/pcpu.h>
   64 #include <sys/proc.h>
   65 #include <sys/sched.h>
   66 #include <sys/smp.h>
   67 #include <sys/sysctl.h>
   68 
   69 #include <vm/vm.h>
   70 #include <vm/vm_param.h>
   71 #include <vm/pmap.h>
   72 #include <vm/vm_kern.h>
   73 #include <vm/vm_extern.h>
   74 
   75 #include <machine/apicreg.h>
   76 #include <machine/cputypes.h>
   77 #include <machine/mca.h>
   78 #include <machine/md_var.h>
   79 #include <machine/mp_watchdog.h>
   80 #include <machine/pcb.h>
   81 #include <machine/psl.h>
   82 #include <machine/smp.h>
   83 #include <machine/specialreg.h>
   84 
   85 #define WARMBOOT_TARGET         0
   86 #define WARMBOOT_OFF            (KERNBASE + 0x0467)
   87 #define WARMBOOT_SEG            (KERNBASE + 0x0469)
   88 
   89 #define CMOS_REG                (0x70)
   90 #define CMOS_DATA               (0x71)
   91 #define BIOS_RESET              (0x0f)
   92 #define BIOS_WARM               (0x0a)
   93 
   94 /*
   95  * this code MUST be enabled here and in mpboot.s.
   96  * it follows the very early stages of AP boot by placing values in CMOS ram.
   97  * it NORMALLY will never be needed and thus the primitive method for enabling.
   98  *
   99 #define CHECK_POINTS
  100  */
  101 
  102 #if defined(CHECK_POINTS) && !defined(PC98)
  103 #define CHECK_READ(A)    (outb(CMOS_REG, (A)), inb(CMOS_DATA))
  104 #define CHECK_WRITE(A,D) (outb(CMOS_REG, (A)), outb(CMOS_DATA, (D)))
  105 
  106 #define CHECK_INIT(D);                          \
  107         CHECK_WRITE(0x34, (D));                 \
  108         CHECK_WRITE(0x35, (D));                 \
  109         CHECK_WRITE(0x36, (D));                 \
  110         CHECK_WRITE(0x37, (D));                 \
  111         CHECK_WRITE(0x38, (D));                 \
  112         CHECK_WRITE(0x39, (D));
  113 
  114 #define CHECK_PRINT(S);                         \
  115         printf("%s: %d, %d, %d, %d, %d, %d\n",  \
  116            (S),                                 \
  117            CHECK_READ(0x34),                    \
  118            CHECK_READ(0x35),                    \
  119            CHECK_READ(0x36),                    \
  120            CHECK_READ(0x37),                    \
  121            CHECK_READ(0x38),                    \
  122            CHECK_READ(0x39));
  123 
  124 #else                           /* CHECK_POINTS */
  125 
  126 #define CHECK_INIT(D)
  127 #define CHECK_PRINT(S)
  128 #define CHECK_WRITE(A, D)
  129 
  130 #endif                          /* CHECK_POINTS */
  131 
  132 /* lock region used by kernel profiling */
  133 int     mcount_lock;
  134 
  135 int     mp_naps;                /* # of Applications processors */
  136 int     boot_cpu_id = -1;       /* designated BSP */
  137 
  138 extern  struct pcpu __pcpu[];
  139 
  140 /*
  141  * CPU topology map datastructures for HTT.
  142  */
  143 static struct cpu_group mp_groups[MAXCPU];
  144 static struct cpu_top mp_top;
  145 
  146 /* AP uses this during bootstrap.  Do not staticize.  */
  147 char *bootSTK;
  148 static int bootAP;
  149 
  150 /* Free these after use */
  151 void *bootstacks[MAXCPU];
  152 
  153 /* Hotwire a 0->4MB V==P mapping */
  154 extern pt_entry_t *KPTphys;
  155 
  156 struct pcb stoppcbs[MAXCPU];
  157 
  158 /* Variables needed for SMP tlb shootdown. */
  159 vm_offset_t smp_tlb_addr1;
  160 vm_offset_t smp_tlb_addr2;
  161 volatile int smp_tlb_wait;
  162 
  163 #ifdef STOP_NMI
  164 volatile cpumask_t ipi_nmi_pending;
  165 
  166 static void     ipi_nmi_selected(u_int32_t cpus);
  167 #endif 
  168 
  169 #ifdef COUNT_IPIS
  170 /* Interrupt counts. */
  171 static u_long *ipi_preempt_counts[MAXCPU];
  172 static u_long *ipi_ast_counts[MAXCPU];
  173 u_long *ipi_invltlb_counts[MAXCPU];
  174 u_long *ipi_invlrng_counts[MAXCPU];
  175 u_long *ipi_invlpg_counts[MAXCPU];
  176 u_long *ipi_invlcache_counts[MAXCPU];
  177 u_long *ipi_rendezvous_counts[MAXCPU];
  178 u_long *ipi_lazypmap_counts[MAXCPU];
  179 #endif
  180 
  181 /*
  182  * Local data and functions.
  183  */
  184 
  185 #ifdef STOP_NMI
  186 /* 
  187  * Provide an alternate method of stopping other CPUs. If another CPU has
  188  * disabled interrupts the conventional STOP IPI will be blocked. This 
  189  * NMI-based stop should get through in that case.
  190  */
  191 static int stop_cpus_with_nmi = 1;
  192 SYSCTL_INT(_debug, OID_AUTO, stop_cpus_with_nmi, CTLTYPE_INT | CTLFLAG_RW,
  193     &stop_cpus_with_nmi, 0, "");
  194 TUNABLE_INT("debug.stop_cpus_with_nmi", &stop_cpus_with_nmi);
  195 #else
  196 #define stop_cpus_with_nmi      0
  197 #endif
  198 
  199 static u_int logical_cpus;
  200 
  201 /* used to hold the AP's until we are ready to release them */
  202 static struct mtx ap_boot_mtx;
  203 
  204 /* Set to 1 once we're ready to let the APs out of the pen. */
  205 static volatile int aps_ready = 0;
  206 
  207 /*
  208  * Store data from cpu_add() until later in the boot when we actually setup
  209  * the APs.
  210  */
  211 struct cpu_info {
  212         int     cpu_present:1;
  213         int     cpu_bsp:1;
  214         int     cpu_disabled:1;
  215         int     cpu_hyperthread:1;
  216 } static cpu_info[MAX_APIC_ID + 1];
  217 int cpu_apic_ids[MAXCPU];
  218 
  219 /* Holds pending bitmap based IPIs per CPU */
  220 static volatile u_int cpu_ipi_pending[MAXCPU];
  221 
  222 static u_int boot_address;
  223 
  224 static void     assign_cpu_ids(void);
  225 static void     install_ap_tramp(void);
  226 static void     set_interrupt_apic_ids(void);
  227 static int      start_all_aps(void);
  228 static int      start_ap(int apic_id);
  229 static void     release_aps(void *dummy);
  230 
  231 static int      hlt_logical_cpus;
  232 static u_int    hyperthreading_cpus;
  233 static cpumask_t        hyperthreading_cpus_mask;
  234 static int      hyperthreading_allowed = 1;
  235 static struct   sysctl_ctx_list logical_cpu_clist;
  236 
  237 static void
  238 mem_range_AP_init(void)
  239 {
  240         if (mem_range_softc.mr_op && mem_range_softc.mr_op->initAP)
  241                 mem_range_softc.mr_op->initAP(&mem_range_softc);
  242 }
  243 
  244 void
  245 mp_topology(void)
  246 {
  247         struct cpu_group *group;
  248         int apic_id;
  249         int groups;
  250         int cpu;
  251 
  252         /* Build the smp_topology map. */
  253         /* Nothing to do if there is no HTT support. */
  254         if (hyperthreading_cpus <= 1)
  255                 return;
  256         group = &mp_groups[0];
  257         groups = 1;
  258         for (cpu = 0, apic_id = 0; apic_id <= MAX_APIC_ID; apic_id++) {
  259                 if (!cpu_info[apic_id].cpu_present ||
  260                     cpu_info[apic_id].cpu_disabled)
  261                         continue;
  262                 /*
  263                  * If the current group has members and we're not a logical
  264                  * cpu, create a new group.
  265                  */
  266                 if (group->cg_count != 0 &&
  267                     (apic_id % hyperthreading_cpus) == 0) {
  268                         group++;
  269                         groups++;
  270                 }
  271                 group->cg_count++;
  272                 group->cg_mask |= 1 << cpu;
  273                 cpu++;
  274         }
  275 
  276         mp_top.ct_count = groups;
  277         mp_top.ct_group = mp_groups;
  278         smp_topology = &mp_top;
  279 }
  280 
  281 
  282 /*
  283  * Calculate usable address in base memory for AP trampoline code.
  284  */
  285 u_int
  286 mp_bootaddress(u_int basemem)
  287 {
  288 
  289         boot_address = trunc_page(basemem);     /* round down to 4k boundary */
  290         if ((basemem - boot_address) < bootMP_size)
  291                 boot_address -= PAGE_SIZE;      /* not enough, lower by 4k */
  292 
  293         return boot_address;
  294 }
  295 
  296 void
  297 cpu_add(u_int apic_id, char boot_cpu)
  298 {
  299 
  300         if (apic_id > MAX_APIC_ID) {
  301                 panic("SMP: APIC ID %d too high", apic_id);
  302                 return;
  303         }
  304         KASSERT(cpu_info[apic_id].cpu_present == 0, ("CPU %d added twice",
  305             apic_id));
  306         cpu_info[apic_id].cpu_present = 1;
  307         if (boot_cpu) {
  308                 KASSERT(boot_cpu_id == -1,
  309                     ("CPU %d claims to be BSP, but CPU %d already is", apic_id,
  310                     boot_cpu_id));
  311                 boot_cpu_id = apic_id;
  312                 cpu_info[apic_id].cpu_bsp = 1;
  313         }
  314         if (mp_ncpus < MAXCPU)
  315                 mp_ncpus++;
  316         if (bootverbose)
  317                 printf("SMP: Added CPU %d (%s)\n", apic_id, boot_cpu ? "BSP" :
  318                     "AP");
  319 }
  320 
  321 void
  322 cpu_mp_setmaxid(void)
  323 {
  324 
  325         mp_maxid = MAXCPU - 1;
  326 }
  327 
  328 int
  329 cpu_mp_probe(void)
  330 {
  331 
  332         /*
  333          * Always record BSP in CPU map so that the mbuf init code works
  334          * correctly.
  335          */
  336         all_cpus = 1;
  337         if (mp_ncpus == 0) {
  338                 /*
  339                  * No CPUs were found, so this must be a UP system.  Setup
  340                  * the variables to represent a system with a single CPU
  341                  * with an id of 0.
  342                  */
  343                 mp_ncpus = 1;
  344                 return (0);
  345         }
  346 
  347         /* At least one CPU was found. */
  348         if (mp_ncpus == 1) {
  349                 /*
  350                  * One CPU was found, so this must be a UP system with
  351                  * an I/O APIC.
  352                  */
  353                 return (0);
  354         }
  355 
  356         /* At least two CPUs were found. */
  357         return (1);
  358 }
  359 
  360 /*
  361  * Initialize the IPI handlers and start up the AP's.
  362  */
  363 void
  364 cpu_mp_start(void)
  365 {
  366         int i;
  367         u_int threads_per_cache, p[4];
  368 
  369         /* Initialize the logical ID to APIC ID table. */
  370         for (i = 0; i < MAXCPU; i++) {
  371                 cpu_apic_ids[i] = -1;
  372                 cpu_ipi_pending[i] = 0;
  373         }
  374 
  375         /* Install an inter-CPU IPI for TLB invalidation */
  376         setidt(IPI_INVLTLB, IDTVEC(invltlb),
  377                SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
  378         setidt(IPI_INVLPG, IDTVEC(invlpg),
  379                SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
  380         setidt(IPI_INVLRNG, IDTVEC(invlrng),
  381                SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
  382 
  383         /* Install an inter-CPU IPI for cache invalidation. */
  384         setidt(IPI_INVLCACHE, IDTVEC(invlcache),
  385                SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
  386 
  387         /* Install an inter-CPU IPI for lazy pmap release */
  388         setidt(IPI_LAZYPMAP, IDTVEC(lazypmap),
  389                SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
  390 
  391         /* Install an inter-CPU IPI for all-CPU rendezvous */
  392         setidt(IPI_RENDEZVOUS, IDTVEC(rendezvous),
  393                SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
  394 
  395         /* Install generic inter-CPU IPI handler */
  396         setidt(IPI_BITMAP_VECTOR, IDTVEC(ipi_intr_bitmap_handler),
  397                SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
  398 
  399         /* Install an inter-CPU IPI for CPU stop/restart */
  400         setidt(IPI_STOP, IDTVEC(cpustop),
  401                SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
  402 
  403 
  404         /* Set boot_cpu_id if needed. */
  405         if (boot_cpu_id == -1) {
  406                 boot_cpu_id = PCPU_GET(apic_id);
  407                 cpu_info[boot_cpu_id].cpu_bsp = 1;
  408         } else
  409                 KASSERT(boot_cpu_id == PCPU_GET(apic_id),
  410                     ("BSP's APIC ID doesn't match boot_cpu_id"));
  411 
  412         /* Setup the initial logical CPUs info. */
  413         logical_cpus = logical_cpus_mask = 0;
  414         if (cpu_feature & CPUID_HTT)
  415                 logical_cpus = (cpu_procinfo & CPUID_HTT_CORES) >> 16;
  416 
  417         /*
  418          * Work out if hyperthreading is *really* enabled.  This
  419          * is made really ugly by the fact that processors lie: Dual
  420          * core processors claim to be hyperthreaded even when they're
  421          * not, presumably because they want to be treated the same
  422          * way as HTT with respect to per-cpu software licensing.
  423          * At the time of writing (May 12, 2005) the only hyperthreaded
  424          * cpus are from Intel, and Intel's dual-core processors can be
  425          * identified via the "deterministic cache parameters" cpuid
  426          * calls.
  427          */
  428         /*
  429          * First determine if this is an Intel processor which claims
  430          * to have hyperthreading support.
  431          */
  432         if ((cpu_feature & CPUID_HTT) && cpu_vendor_id == CPU_VENDOR_INTEL) {
  433                 /*
  434                  * If the "deterministic cache parameters" cpuid calls
  435                  * are available, use them.
  436                  */
  437                 if (cpu_high >= 4) {
  438                         /* Ask the processor about the L1 cache. */
  439                         for (i = 0; i < 1; i++) {
  440                                 cpuid_count(4, i, p);
  441                                 threads_per_cache = ((p[0] & 0x3ffc000) >> 14) + 1;
  442                                 if (hyperthreading_cpus < threads_per_cache)
  443                                         hyperthreading_cpus = threads_per_cache;
  444                                 if ((p[0] & 0x1f) == 0)
  445                                         break;
  446                         }
  447                 }
  448 
  449                 /*
  450                  * If the deterministic cache parameters are not
  451                  * available, or if no caches were reported to exist,
  452                  * just accept what the HTT flag indicated.
  453                  */
  454                 if (hyperthreading_cpus == 0)
  455                         hyperthreading_cpus = logical_cpus;
  456         }
  457 
  458         assign_cpu_ids();
  459 
  460         /* Start each Application Processor */
  461         start_all_aps();
  462 
  463         set_interrupt_apic_ids();
  464 
  465         /* Last, setup the cpu topology now that we have probed CPUs */
  466         mp_topology();
  467 }
  468 
  469 
  470 /*
  471  * Print various information about the SMP system hardware and setup.
  472  */
  473 void
  474 cpu_mp_announce(void)
  475 {
  476         const char *hyperthread;
  477         int i;
  478 
  479         /* List active CPUs first. */
  480         printf(" cpu0 (BSP): APIC ID: %2d\n", boot_cpu_id);
  481         for (i = 1; i < mp_ncpus; i++) {
  482                 if (cpu_info[cpu_apic_ids[i]].cpu_hyperthread)
  483                         hyperthread = "/HT";
  484                 else
  485                         hyperthread = "";
  486                 printf(" cpu%d (AP%s): APIC ID: %2d\n", i, hyperthread,
  487                     cpu_apic_ids[i]);
  488         }
  489 
  490         /* List disabled CPUs last. */
  491         for (i = 0; i <= MAX_APIC_ID; i++) {
  492                 if (!cpu_info[i].cpu_present || !cpu_info[i].cpu_disabled)
  493                         continue;
  494                 if (cpu_info[i].cpu_hyperthread)
  495                         hyperthread = "/HT";
  496                 else
  497                         hyperthread = "";
  498                 printf("  cpu (AP%s): APIC ID: %2d (disabled)\n", hyperthread,
  499                     i);
  500         }
  501 }
  502 
  503 /*
  504  * AP CPU's call this to initialize themselves.
  505  */
  506 void
  507 init_secondary(void)
  508 {
  509         struct pcpu *pc;
  510         vm_offset_t addr;
  511         int     gsel_tss;
  512         int     x, myid;
  513         u_int   cr0;
  514 
  515         /* bootAP is set in start_ap() to our ID. */
  516         myid = bootAP;
  517 
  518         /* Get per-cpu data */
  519         pc = &__pcpu[myid];
  520 
  521         /* prime data page for it to use */
  522         pcpu_init(pc, myid, sizeof(struct pcpu));
  523         pc->pc_apic_id = cpu_apic_ids[myid];
  524         pc->pc_prvspace = pc;
  525         pc->pc_curthread = 0;
  526 
  527         gdt_segs[GPRIV_SEL].ssd_base = (int) pc;
  528         gdt_segs[GPROC0_SEL].ssd_base = (int) &pc->pc_common_tss;
  529 
  530         for (x = 0; x < NGDT; x++) {
  531                 ssdtosd(&gdt_segs[x], &gdt[myid * NGDT + x].sd);
  532         }
  533 
  534         r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1;
  535         r_gdt.rd_base = (int) &gdt[myid * NGDT];
  536         lgdt(&r_gdt);                   /* does magic intra-segment return */
  537 
  538         lidt(&r_idt);
  539 
  540         lldt(_default_ldt);
  541         PCPU_SET(currentldt, _default_ldt);
  542 
  543         gsel_tss = GSEL(GPROC0_SEL, SEL_KPL);
  544         gdt[myid * NGDT + GPROC0_SEL].sd.sd_type = SDT_SYS386TSS;
  545         PCPU_SET(common_tss.tss_esp0, 0); /* not used until after switch */
  546         PCPU_SET(common_tss.tss_ss0, GSEL(GDATA_SEL, SEL_KPL));
  547         PCPU_SET(common_tss.tss_ioopt, (sizeof (struct i386tss)) << 16);
  548         PCPU_SET(tss_gdt, &gdt[myid * NGDT + GPROC0_SEL].sd);
  549         PCPU_SET(common_tssd, *PCPU_GET(tss_gdt));
  550         ltr(gsel_tss);
  551 
  552         PCPU_SET(fsgs_gdt, &gdt[myid * NGDT + GUFS_SEL].sd);
  553 
  554         /*
  555          * Set to a known state:
  556          * Set by mpboot.s: CR0_PG, CR0_PE
  557          * Set by cpu_setregs: CR0_NE, CR0_MP, CR0_TS, CR0_WP, CR0_AM
  558          */
  559         cr0 = rcr0();
  560         cr0 &= ~(CR0_CD | CR0_NW | CR0_EM);
  561         load_cr0(cr0);
  562         CHECK_WRITE(0x38, 5);
  563         
  564         /* Disable local APIC just to be sure. */
  565         lapic_disable();
  566 
  567         /* signal our startup to the BSP. */
  568         mp_naps++;
  569         CHECK_WRITE(0x39, 6);
  570 
  571         /* Spin until the BSP releases the AP's. */
  572         while (!aps_ready)
  573                 ia32_pause();
  574 
  575         /* BSP may have changed PTD while we were waiting */
  576         invltlb();
  577         for (addr = 0; addr < NKPT * NBPDR - 1; addr += PAGE_SIZE)
  578                 invlpg(addr);
  579 
  580 #if defined(I586_CPU) && !defined(NO_F00F_HACK)
  581         lidt(&r_idt);
  582 #endif
  583 
  584         /* Initialize the PAT MSR if present. */
  585         pmap_init_pat();
  586 
  587         /* set up CPU registers and state */
  588         cpu_setregs();
  589 
  590         /* set up FPU state on the AP */
  591         npxinit();
  592 
  593         /* set up SSE registers */
  594         enable_sse();
  595 
  596 #ifdef PAE
  597         /* Enable the PTE no-execute bit. */
  598         if ((amd_feature & AMDID_NX) != 0) {
  599                 uint64_t msr;
  600 
  601                 msr = rdmsr(MSR_EFER) | EFER_NXE;
  602                 wrmsr(MSR_EFER, msr);
  603         }
  604 #endif
  605 
  606         /* A quick check from sanity claus */
  607         if (PCPU_GET(apic_id) != lapic_id()) {
  608                 printf("SMP: cpuid = %d\n", PCPU_GET(cpuid));
  609                 printf("SMP: actual apic_id = %d\n", lapic_id());
  610                 printf("SMP: correct apic_id = %d\n", PCPU_GET(apic_id));
  611                 panic("cpuid mismatch! boom!!");
  612         }
  613 
  614         /* Initialize curthread. */
  615         KASSERT(PCPU_GET(idlethread) != NULL, ("no idle thread"));
  616         PCPU_SET(curthread, PCPU_GET(idlethread));
  617 
  618         mca_init();
  619 
  620         mtx_lock_spin(&ap_boot_mtx);
  621 
  622         /* Init local apic for irq's */
  623         lapic_setup(1);
  624 
  625         /* Set memory range attributes for this CPU to match the BSP */
  626         mem_range_AP_init();
  627 
  628         smp_cpus++;
  629 
  630         CTR1(KTR_SMP, "SMP: AP CPU #%d Launched", PCPU_GET(cpuid));
  631         printf("SMP: AP CPU #%d Launched!\n", PCPU_GET(cpuid));
  632 
  633         /* Determine if we are a logical CPU. */
  634         if (logical_cpus > 1 && PCPU_GET(apic_id) % logical_cpus != 0)
  635                 logical_cpus_mask |= PCPU_GET(cpumask);
  636         
  637         /* Determine if we are a hyperthread. */
  638         if (hyperthreading_cpus > 1 &&
  639             PCPU_GET(apic_id) % hyperthreading_cpus != 0)
  640                 hyperthreading_cpus_mask |= PCPU_GET(cpumask);
  641 
  642         /* Build our map of 'other' CPUs. */
  643         PCPU_SET(other_cpus, all_cpus & ~PCPU_GET(cpumask));
  644 
  645         if (bootverbose)
  646                 lapic_dump("AP");
  647 
  648         if (smp_cpus == mp_ncpus) {
  649                 /* enable IPI's, tlb shootdown, freezes etc */
  650                 atomic_store_rel_int(&smp_started, 1);
  651                 smp_active = 1;  /* historic */
  652         }
  653 
  654         mtx_unlock_spin(&ap_boot_mtx);
  655 
  656         /* wait until all the AP's are up */
  657         while (smp_started == 0)
  658                 ia32_pause();
  659 
  660         /* enter the scheduler */
  661         sched_throw(NULL);
  662 
  663         panic("scheduler returned us to %s", __func__);
  664         /* NOTREACHED */
  665 }
  666 
  667 /*******************************************************************
  668  * local functions and data
  669  */
  670 
  671 /*
  672  * We tell the I/O APIC code about all the CPUs we want to receive
  673  * interrupts.  If we don't want certain CPUs to receive IRQs we
  674  * can simply not tell the I/O APIC code about them in this function.
  675  * We also do not tell it about the BSP since it tells itself about
  676  * the BSP internally to work with UP kernels and on UP machines.
  677  */
  678 static void
  679 set_interrupt_apic_ids(void)
  680 {
  681         u_int i, apic_id;
  682 
  683         for (i = 0; i < MAXCPU; i++) {
  684                 apic_id = cpu_apic_ids[i];
  685                 if (apic_id == -1)
  686                         continue;
  687                 if (cpu_info[apic_id].cpu_bsp)
  688                         continue;
  689                 if (cpu_info[apic_id].cpu_disabled)
  690                         continue;
  691 
  692                 /* Don't let hyperthreads service interrupts. */
  693                 if (hyperthreading_cpus > 1 &&
  694                     apic_id % hyperthreading_cpus != 0)
  695                         continue;
  696 
  697                 intr_add_cpu(i);
  698         }
  699 }
  700 
  701 /*
  702  * Assign logical CPU IDs to local APICs.
  703  */
  704 static void
  705 assign_cpu_ids(void)
  706 {
  707         u_int i;
  708 
  709         TUNABLE_INT_FETCH("machdep.hyperthreading_allowed",
  710             &hyperthreading_allowed);
  711 
  712         /* Check for explicitly disabled CPUs. */
  713         for (i = 0; i <= MAX_APIC_ID; i++) {
  714                 if (!cpu_info[i].cpu_present || cpu_info[i].cpu_bsp)
  715                         continue;
  716 
  717                 if (hyperthreading_cpus > 1 && i % hyperthreading_cpus != 0) {
  718                         cpu_info[i].cpu_hyperthread = 1;
  719 #if defined(SCHED_ULE)
  720                         /*
  721                          * Don't use HT CPU if it has been disabled by a
  722                          * tunable.
  723                          */
  724                         if (hyperthreading_allowed == 0) {
  725                                 cpu_info[i].cpu_disabled = 1;
  726                                 continue;
  727                         }
  728 #endif
  729                 }
  730 
  731                 /* Don't use this CPU if it has been disabled by a tunable. */
  732                 if (resource_disabled("lapic", i)) {
  733                         cpu_info[i].cpu_disabled = 1;
  734                         continue;
  735                 }
  736         }
  737 
  738         /*
  739          * Assign CPU IDs to local APIC IDs and disable any CPUs
  740          * beyond MAXCPU.  CPU 0 is always assigned to the BSP.
  741          *
  742          * To minimize confusion for userland, we attempt to number
  743          * CPUs such that all threads and cores in a package are
  744          * grouped together.  For now we assume that the BSP is always
  745          * the first thread in a package and just start adding APs
  746          * starting with the BSP's APIC ID.
  747          */
  748         mp_ncpus = 1;
  749         cpu_apic_ids[0] = boot_cpu_id;
  750         for (i = boot_cpu_id + 1; i != boot_cpu_id;
  751              i == MAX_APIC_ID ? i = 0 : i++) {
  752                 if (!cpu_info[i].cpu_present || cpu_info[i].cpu_bsp ||
  753                     cpu_info[i].cpu_disabled)
  754                         continue;
  755 
  756                 if (mp_ncpus < MAXCPU) {
  757                         cpu_apic_ids[mp_ncpus] = i;
  758                         mp_ncpus++;
  759                 } else
  760                         cpu_info[i].cpu_disabled = 1;
  761         }
  762         KASSERT(mp_maxid >= mp_ncpus - 1,
  763             ("%s: counters out of sync: max %d, count %d", __func__, mp_maxid,
  764             mp_ncpus));         
  765 }
  766 
  767 /*
  768  * start each AP in our list
  769  */
  770 static int
  771 start_all_aps(void)
  772 {
  773 #ifndef PC98
  774         u_char mpbiosreason;
  775 #endif
  776         uintptr_t kptbase;
  777         u_int32_t mpbioswarmvec;
  778         int apic_id, cpu, i;
  779 
  780         mtx_init(&ap_boot_mtx, "ap boot", NULL, MTX_SPIN);
  781 
  782         /* install the AP 1st level boot code */
  783         install_ap_tramp();
  784 
  785         /* save the current value of the warm-start vector */
  786         mpbioswarmvec = *((u_int32_t *) WARMBOOT_OFF);
  787 #ifndef PC98
  788         outb(CMOS_REG, BIOS_RESET);
  789         mpbiosreason = inb(CMOS_DATA);
  790 #endif
  791 
  792         /* set up temporary P==V mapping for AP boot */
  793         /* XXX this is a hack, we should boot the AP on its own stack/PTD */
  794         kptbase = (uintptr_t)(void *)KPTphys;
  795         for (i = 0; i < NKPT; i++)
  796                 PTD[i] = (pd_entry_t)(PG_V | PG_RW |
  797                     ((kptbase + i * PAGE_SIZE) & PG_FRAME));
  798         invltlb();
  799 
  800         /* start each AP */
  801         for (cpu = 1; cpu < mp_ncpus; cpu++) {
  802                 apic_id = cpu_apic_ids[cpu];
  803 
  804                 /* allocate and set up a boot stack data page */
  805                 bootstacks[cpu] = (char *)kmem_alloc(kernel_map, KSTACK_PAGES * PAGE_SIZE);
  806 
  807                 /* setup a vector to our boot code */
  808                 *((volatile u_short *) WARMBOOT_OFF) = WARMBOOT_TARGET;
  809                 *((volatile u_short *) WARMBOOT_SEG) = (boot_address >> 4);
  810 #ifndef PC98
  811                 outb(CMOS_REG, BIOS_RESET);
  812                 outb(CMOS_DATA, BIOS_WARM);     /* 'warm-start' */
  813 #endif
  814 
  815                 bootSTK = (char *)bootstacks[cpu] + KSTACK_PAGES * PAGE_SIZE - 4;
  816                 bootAP = cpu;
  817 
  818                 /* attempt to start the Application Processor */
  819                 CHECK_INIT(99); /* setup checkpoints */
  820                 if (!start_ap(apic_id)) {
  821                         printf("AP #%d (PHY# %d) failed!\n", cpu, apic_id);
  822                         CHECK_PRINT("trace");   /* show checkpoints */
  823                         /* better panic as the AP may be running loose */
  824                         printf("panic y/n? [y] ");
  825                         if (cngetc() != 'n')
  826                                 panic("bye-bye");
  827                 }
  828                 CHECK_PRINT("trace");           /* show checkpoints */
  829 
  830                 all_cpus |= (1 << cpu);         /* record AP in CPU map */
  831         }
  832 
  833         /* build our map of 'other' CPUs */
  834         PCPU_SET(other_cpus, all_cpus & ~PCPU_GET(cpumask));
  835 
  836         /* restore the warmstart vector */
  837         *(u_int32_t *) WARMBOOT_OFF = mpbioswarmvec;
  838 
  839 #ifndef PC98
  840         outb(CMOS_REG, BIOS_RESET);
  841         outb(CMOS_DATA, mpbiosreason);
  842 #endif
  843 
  844         /* Undo V==P hack from above */
  845         for (i = 0; i < NKPT; i++)
  846                 PTD[i] = 0;
  847         pmap_invalidate_range(kernel_pmap, 0, NKPT * NBPDR - 1);
  848 
  849         /* number of APs actually started */
  850         return mp_naps;
  851 }
  852 
  853 /*
  854  * load the 1st level AP boot code into base memory.
  855  */
  856 
  857 /* targets for relocation */
  858 extern void bigJump(void);
  859 extern void bootCodeSeg(void);
  860 extern void bootDataSeg(void);
  861 extern void MPentry(void);
  862 extern u_int MP_GDT;
  863 extern u_int mp_gdtbase;
  864 
  865 static void
  866 install_ap_tramp(void)
  867 {
  868         int     x;
  869         int     size = *(int *) ((u_long) & bootMP_size);
  870         vm_offset_t va = boot_address + KERNBASE;
  871         u_char *src = (u_char *) ((u_long) bootMP);
  872         u_char *dst = (u_char *) va;
  873         u_int   boot_base = (u_int) bootMP;
  874         u_int8_t *dst8;
  875         u_int16_t *dst16;
  876         u_int32_t *dst32;
  877 
  878         KASSERT (size <= PAGE_SIZE,
  879             ("'size' do not fit into PAGE_SIZE, as expected."));
  880         pmap_kenter(va, boot_address);
  881         pmap_invalidate_page (kernel_pmap, va);
  882         for (x = 0; x < size; ++x)
  883                 *dst++ = *src++;
  884 
  885         /*
  886          * modify addresses in code we just moved to basemem. unfortunately we
  887          * need fairly detailed info about mpboot.s for this to work.  changes
  888          * to mpboot.s might require changes here.
  889          */
  890 
  891         /* boot code is located in KERNEL space */
  892         dst = (u_char *) va;
  893 
  894         /* modify the lgdt arg */
  895         dst32 = (u_int32_t *) (dst + ((u_int) & mp_gdtbase - boot_base));
  896         *dst32 = boot_address + ((u_int) & MP_GDT - boot_base);
  897 
  898         /* modify the ljmp target for MPentry() */
  899         dst32 = (u_int32_t *) (dst + ((u_int) bigJump - boot_base) + 1);
  900         *dst32 = ((u_int) MPentry - KERNBASE);
  901 
  902         /* modify the target for boot code segment */
  903         dst16 = (u_int16_t *) (dst + ((u_int) bootCodeSeg - boot_base));
  904         dst8 = (u_int8_t *) (dst16 + 1);
  905         *dst16 = (u_int) boot_address & 0xffff;
  906         *dst8 = ((u_int) boot_address >> 16) & 0xff;
  907 
  908         /* modify the target for boot data segment */
  909         dst16 = (u_int16_t *) (dst + ((u_int) bootDataSeg - boot_base));
  910         dst8 = (u_int8_t *) (dst16 + 1);
  911         *dst16 = (u_int) boot_address & 0xffff;
  912         *dst8 = ((u_int) boot_address >> 16) & 0xff;
  913 }
  914 
  915 /*
  916  * This function starts the AP (application processor) identified
  917  * by the APIC ID 'physicalCpu'.  It does quite a "song and dance"
  918  * to accomplish this.  This is necessary because of the nuances
  919  * of the different hardware we might encounter.  It isn't pretty,
  920  * but it seems to work.
  921  */
  922 static int
  923 start_ap(int apic_id)
  924 {
  925         int vector, ms;
  926         int cpus;
  927 
  928         /* calculate the vector */
  929         vector = (boot_address >> 12) & 0xff;
  930 
  931         /* used as a watchpoint to signal AP startup */
  932         cpus = mp_naps;
  933 
  934         /*
  935          * first we do an INIT/RESET IPI this INIT IPI might be run, reseting
  936          * and running the target CPU. OR this INIT IPI might be latched (P5
  937          * bug), CPU waiting for STARTUP IPI. OR this INIT IPI might be
  938          * ignored.
  939          */
  940 
  941         /* do an INIT IPI: assert RESET */
  942         lapic_ipi_raw(APIC_DEST_DESTFLD | APIC_TRIGMOD_EDGE |
  943             APIC_LEVEL_ASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_INIT, apic_id);
  944 
  945         /* wait for pending status end */
  946         lapic_ipi_wait(-1);
  947 
  948         /* do an INIT IPI: deassert RESET */
  949         lapic_ipi_raw(APIC_DEST_ALLESELF | APIC_TRIGMOD_LEVEL |
  950             APIC_LEVEL_DEASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_INIT, 0);
  951 
  952         /* wait for pending status end */
  953         DELAY(10000);           /* wait ~10mS */
  954         lapic_ipi_wait(-1);
  955 
  956         /*
  957          * next we do a STARTUP IPI: the previous INIT IPI might still be
  958          * latched, (P5 bug) this 1st STARTUP would then terminate
  959          * immediately, and the previously started INIT IPI would continue. OR
  960          * the previous INIT IPI has already run. and this STARTUP IPI will
  961          * run. OR the previous INIT IPI was ignored. and this STARTUP IPI
  962          * will run.
  963          */
  964 
  965         /* do a STARTUP IPI */
  966         lapic_ipi_raw(APIC_DEST_DESTFLD | APIC_TRIGMOD_EDGE |
  967             APIC_LEVEL_DEASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_STARTUP |
  968             vector, apic_id);
  969         lapic_ipi_wait(-1);
  970         DELAY(200);             /* wait ~200uS */
  971 
  972         /*
  973          * finally we do a 2nd STARTUP IPI: this 2nd STARTUP IPI should run IF
  974          * the previous STARTUP IPI was cancelled by a latched INIT IPI. OR
  975          * this STARTUP IPI will be ignored, as only ONE STARTUP IPI is
  976          * recognized after hardware RESET or INIT IPI.
  977          */
  978 
  979         lapic_ipi_raw(APIC_DEST_DESTFLD | APIC_TRIGMOD_EDGE |
  980             APIC_LEVEL_DEASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_STARTUP |
  981             vector, apic_id);
  982         lapic_ipi_wait(-1);
  983         DELAY(200);             /* wait ~200uS */
  984 
  985         /* Wait up to 5 seconds for it to start. */
  986         for (ms = 0; ms < 5000; ms++) {
  987                 if (mp_naps > cpus)
  988                         return 1;       /* return SUCCESS */
  989                 DELAY(1000);
  990         }
  991         return 0;               /* return FAILURE */
  992 }
  993 
  994 #ifdef COUNT_XINVLTLB_HITS
  995 u_int xhits_gbl[MAXCPU];
  996 u_int xhits_pg[MAXCPU];
  997 u_int xhits_rng[MAXCPU];
  998 SYSCTL_NODE(_debug, OID_AUTO, xhits, CTLFLAG_RW, 0, "");
  999 SYSCTL_OPAQUE(_debug_xhits, OID_AUTO, global, CTLFLAG_RW, &xhits_gbl,
 1000     sizeof(xhits_gbl), "IU", "");
 1001 SYSCTL_OPAQUE(_debug_xhits, OID_AUTO, page, CTLFLAG_RW, &xhits_pg,
 1002     sizeof(xhits_pg), "IU", "");
 1003 SYSCTL_OPAQUE(_debug_xhits, OID_AUTO, range, CTLFLAG_RW, &xhits_rng,
 1004     sizeof(xhits_rng), "IU", "");
 1005 
 1006 u_int ipi_global;
 1007 u_int ipi_page;
 1008 u_int ipi_range;
 1009 u_int ipi_range_size;
 1010 SYSCTL_INT(_debug_xhits, OID_AUTO, ipi_global, CTLFLAG_RW, &ipi_global, 0, "");
 1011 SYSCTL_INT(_debug_xhits, OID_AUTO, ipi_page, CTLFLAG_RW, &ipi_page, 0, "");
 1012 SYSCTL_INT(_debug_xhits, OID_AUTO, ipi_range, CTLFLAG_RW, &ipi_range, 0, "");
 1013 SYSCTL_INT(_debug_xhits, OID_AUTO, ipi_range_size, CTLFLAG_RW, &ipi_range_size,
 1014     0, "");
 1015 
 1016 u_int ipi_masked_global;
 1017 u_int ipi_masked_page;
 1018 u_int ipi_masked_range;
 1019 u_int ipi_masked_range_size;
 1020 SYSCTL_INT(_debug_xhits, OID_AUTO, ipi_masked_global, CTLFLAG_RW,
 1021     &ipi_masked_global, 0, "");
 1022 SYSCTL_INT(_debug_xhits, OID_AUTO, ipi_masked_page, CTLFLAG_RW,
 1023     &ipi_masked_page, 0, "");
 1024 SYSCTL_INT(_debug_xhits, OID_AUTO, ipi_masked_range, CTLFLAG_RW,
 1025     &ipi_masked_range, 0, "");
 1026 SYSCTL_INT(_debug_xhits, OID_AUTO, ipi_masked_range_size, CTLFLAG_RW,
 1027     &ipi_masked_range_size, 0, "");
 1028 #endif /* COUNT_XINVLTLB_HITS */
 1029 
 1030 /*
 1031  * Flush the TLB on all other CPU's
 1032  */
 1033 static void
 1034 smp_tlb_shootdown(u_int vector, vm_offset_t addr1, vm_offset_t addr2)
 1035 {
 1036         u_int ncpu;
 1037 
 1038         ncpu = mp_ncpus - 1;    /* does not shootdown self */
 1039         if (ncpu < 1)
 1040                 return;         /* no other cpus */
 1041         if (!(read_eflags() & PSL_I))
 1042                 panic("%s: interrupts disabled", __func__);
 1043         mtx_lock_spin(&smp_ipi_mtx);
 1044         smp_tlb_addr1 = addr1;
 1045         smp_tlb_addr2 = addr2;
 1046         atomic_store_rel_int(&smp_tlb_wait, 0);
 1047         ipi_all_but_self(vector);
 1048         while (smp_tlb_wait < ncpu)
 1049                 ia32_pause();
 1050         mtx_unlock_spin(&smp_ipi_mtx);
 1051 }
 1052 
 1053 static void
 1054 smp_targeted_tlb_shootdown(u_int mask, u_int vector, vm_offset_t addr1, vm_offset_t addr2)
 1055 {
 1056         int ncpu, othercpus;
 1057 
 1058         othercpus = mp_ncpus - 1;
 1059         if (mask == (u_int)-1) {
 1060                 ncpu = othercpus;
 1061                 if (ncpu < 1)
 1062                         return;
 1063         } else {
 1064                 mask &= ~PCPU_GET(cpumask);
 1065                 if (mask == 0)
 1066                         return;
 1067                 ncpu = bitcount32(mask);
 1068                 if (ncpu > othercpus) {
 1069                         /* XXX this should be a panic offence */
 1070                         printf("SMP: tlb shootdown to %d other cpus (only have %d)\n",
 1071                             ncpu, othercpus);
 1072                         ncpu = othercpus;
 1073                 }
 1074                 /* XXX should be a panic, implied by mask == 0 above */
 1075                 if (ncpu < 1)
 1076                         return;
 1077         }
 1078         if (!(read_eflags() & PSL_I))
 1079                 panic("%s: interrupts disabled", __func__);
 1080         mtx_lock_spin(&smp_ipi_mtx);
 1081         smp_tlb_addr1 = addr1;
 1082         smp_tlb_addr2 = addr2;
 1083         atomic_store_rel_int(&smp_tlb_wait, 0);
 1084         if (mask == (u_int)-1)
 1085                 ipi_all_but_self(vector);
 1086         else
 1087                 ipi_selected(mask, vector);
 1088         while (smp_tlb_wait < ncpu)
 1089                 ia32_pause();
 1090         mtx_unlock_spin(&smp_ipi_mtx);
 1091 }
 1092 
 1093 void
 1094 smp_cache_flush(void)
 1095 {
 1096 
 1097         if (smp_started)
 1098                 smp_tlb_shootdown(IPI_INVLCACHE, 0, 0);
 1099 }
 1100 
 1101 void
 1102 smp_invltlb(void)
 1103 {
 1104 
 1105         if (smp_started) {
 1106                 smp_tlb_shootdown(IPI_INVLTLB, 0, 0);
 1107 #ifdef COUNT_XINVLTLB_HITS
 1108                 ipi_global++;
 1109 #endif
 1110         }
 1111 }
 1112 
 1113 void
 1114 smp_invlpg(vm_offset_t addr)
 1115 {
 1116 
 1117         if (smp_started) {
 1118                 smp_tlb_shootdown(IPI_INVLPG, addr, 0);
 1119 #ifdef COUNT_XINVLTLB_HITS
 1120                 ipi_page++;
 1121 #endif
 1122         }
 1123 }
 1124 
 1125 void
 1126 smp_invlpg_range(vm_offset_t addr1, vm_offset_t addr2)
 1127 {
 1128 
 1129         if (smp_started) {
 1130                 smp_tlb_shootdown(IPI_INVLRNG, addr1, addr2);
 1131 #ifdef COUNT_XINVLTLB_HITS
 1132                 ipi_range++;
 1133                 ipi_range_size += (addr2 - addr1) / PAGE_SIZE;
 1134 #endif
 1135         }
 1136 }
 1137 
 1138 void
 1139 smp_masked_invltlb(u_int mask)
 1140 {
 1141 
 1142         if (smp_started) {
 1143                 smp_targeted_tlb_shootdown(mask, IPI_INVLTLB, 0, 0);
 1144 #ifdef COUNT_XINVLTLB_HITS
 1145                 ipi_masked_global++;
 1146 #endif
 1147         }
 1148 }
 1149 
 1150 void
 1151 smp_masked_invlpg(u_int mask, vm_offset_t addr)
 1152 {
 1153 
 1154         if (smp_started) {
 1155                 smp_targeted_tlb_shootdown(mask, IPI_INVLPG, addr, 0);
 1156 #ifdef COUNT_XINVLTLB_HITS
 1157                 ipi_masked_page++;
 1158 #endif
 1159         }
 1160 }
 1161 
 1162 void
 1163 smp_masked_invlpg_range(u_int mask, vm_offset_t addr1, vm_offset_t addr2)
 1164 {
 1165 
 1166         if (smp_started) {
 1167                 smp_targeted_tlb_shootdown(mask, IPI_INVLRNG, addr1, addr2);
 1168 #ifdef COUNT_XINVLTLB_HITS
 1169                 ipi_masked_range++;
 1170                 ipi_masked_range_size += (addr2 - addr1) / PAGE_SIZE;
 1171 #endif
 1172         }
 1173 }
 1174 
 1175 void
 1176 ipi_bitmap_handler(struct trapframe frame)
 1177 {
 1178         int cpu = PCPU_GET(cpuid);
 1179         u_int ipi_bitmap;
 1180 
 1181         ipi_bitmap = atomic_readandclear_int(&cpu_ipi_pending[cpu]);
 1182 
 1183         if (ipi_bitmap & (1 << IPI_PREEMPT)) {
 1184                 struct thread *running_thread = curthread;
 1185 #ifdef COUNT_IPIS
 1186                 (*ipi_preempt_counts[cpu])++;
 1187 #endif
 1188                 thread_lock(running_thread);
 1189                 if (running_thread->td_critnest > 1) 
 1190                         running_thread->td_owepreempt = 1;
 1191                 else            
 1192                         mi_switch(SW_INVOL | SW_PREEMPT, NULL);
 1193                 thread_unlock(running_thread);
 1194         }
 1195 
 1196         if (ipi_bitmap & (1 << IPI_AST)) {
 1197 #ifdef COUNT_IPIS
 1198                 (*ipi_ast_counts[cpu])++;
 1199 #endif
 1200                 /* Nothing to do for AST */
 1201         }
 1202 }
 1203 
 1204 /*
 1205  * send an IPI to a set of cpus.
 1206  */
 1207 void
 1208 ipi_selected(u_int32_t cpus, u_int ipi)
 1209 {
 1210         int cpu;
 1211         u_int bitmap = 0;
 1212         u_int old_pending;
 1213         u_int new_pending;
 1214 
 1215         if (IPI_IS_BITMAPED(ipi)) { 
 1216                 bitmap = 1 << ipi;
 1217                 ipi = IPI_BITMAP_VECTOR;
 1218         }
 1219 
 1220 #ifdef STOP_NMI
 1221         if (ipi == IPI_STOP && stop_cpus_with_nmi) {
 1222                 ipi_nmi_selected(cpus);
 1223                 return;
 1224         }
 1225 #endif
 1226         CTR3(KTR_SMP, "%s: cpus: %x ipi: %x", __func__, cpus, ipi);
 1227         while ((cpu = ffs(cpus)) != 0) {
 1228                 cpu--;
 1229                 cpus &= ~(1 << cpu);
 1230 
 1231                 KASSERT(cpu_apic_ids[cpu] != -1,
 1232                     ("IPI to non-existent CPU %d", cpu));
 1233 
 1234                 if (bitmap) {
 1235                         do {
 1236                                 old_pending = cpu_ipi_pending[cpu];
 1237                                 new_pending = old_pending | bitmap;
 1238                         } while  (!atomic_cmpset_int(&cpu_ipi_pending[cpu],old_pending, new_pending));  
 1239 
 1240                         if (old_pending)
 1241                                 continue;
 1242                 }
 1243 
 1244                 lapic_ipi_vectored(ipi, cpu_apic_ids[cpu]);
 1245         }
 1246 
 1247 }
 1248 
 1249 /*
 1250  * send an IPI INTerrupt containing 'vector' to all CPUs, including myself
 1251  */
 1252 void
 1253 ipi_all(u_int ipi)
 1254 {
 1255 
 1256         if (IPI_IS_BITMAPED(ipi) || (ipi == IPI_STOP && stop_cpus_with_nmi)) {
 1257                 ipi_selected(all_cpus, ipi);
 1258                 return;
 1259         }
 1260         CTR2(KTR_SMP, "%s: ipi: %x", __func__, ipi);
 1261         lapic_ipi_vectored(ipi, APIC_IPI_DEST_ALL);
 1262 }
 1263 
 1264 /*
 1265  * send an IPI to all CPUs EXCEPT myself
 1266  */
 1267 void
 1268 ipi_all_but_self(u_int ipi)
 1269 {
 1270 
 1271         if (IPI_IS_BITMAPED(ipi) || (ipi == IPI_STOP && stop_cpus_with_nmi)) {
 1272                 ipi_selected(PCPU_GET(other_cpus), ipi);
 1273                 return;
 1274         }
 1275         CTR2(KTR_SMP, "%s: ipi: %x", __func__, ipi);
 1276         lapic_ipi_vectored(ipi, APIC_IPI_DEST_OTHERS);
 1277 }
 1278 
 1279 /*
 1280  * send an IPI to myself
 1281  */
 1282 void
 1283 ipi_self(u_int ipi)
 1284 {
 1285 
 1286         if (IPI_IS_BITMAPED(ipi) || (ipi == IPI_STOP && stop_cpus_with_nmi)) {
 1287                 ipi_selected(PCPU_GET(cpumask), ipi);
 1288                 return;
 1289         }
 1290         CTR2(KTR_SMP, "%s: ipi: %x", __func__, ipi);
 1291         lapic_ipi_vectored(ipi, APIC_IPI_DEST_SELF);
 1292 }
 1293 
 1294 #ifdef STOP_NMI
 1295 /*
 1296  * send NMI IPI to selected CPUs
 1297  */
 1298 
 1299 #define BEFORE_SPIN     1000000
 1300 
 1301 void
 1302 ipi_nmi_selected(u_int32_t cpus)
 1303 {
 1304         int cpu;
 1305         register_t icrlo;
 1306 
 1307         icrlo = APIC_DELMODE_NMI | APIC_DESTMODE_PHY | APIC_LEVEL_ASSERT 
 1308                 | APIC_TRIGMOD_EDGE; 
 1309         
 1310         CTR2(KTR_SMP, "%s: cpus: %x nmi", __func__, cpus);
 1311 
 1312         atomic_set_int(&ipi_nmi_pending, cpus);
 1313 
 1314         while ((cpu = ffs(cpus)) != 0) {
 1315                 cpu--;
 1316                 cpus &= ~(1 << cpu);
 1317 
 1318                 KASSERT(cpu_apic_ids[cpu] != -1,
 1319                     ("IPI NMI to non-existent CPU %d", cpu));
 1320                 
 1321                 /* Wait for an earlier IPI to finish. */
 1322                 if (!lapic_ipi_wait(BEFORE_SPIN))
 1323                         panic("ipi_nmi_selected: previous IPI has not cleared");
 1324 
 1325                 lapic_ipi_raw(icrlo, cpu_apic_ids[cpu]);
 1326         }
 1327 }
 1328 
 1329 int
 1330 ipi_nmi_handler(void)
 1331 {
 1332         int cpumask = PCPU_GET(cpumask);
 1333 
 1334         if (!(ipi_nmi_pending & cpumask))
 1335                 return 1;
 1336 
 1337         atomic_clear_int(&ipi_nmi_pending, cpumask);
 1338         cpustop_handler();
 1339         return 0;
 1340 }
 1341 
 1342 #endif /* STOP_NMI */
 1343 
 1344 /*
 1345  * Handle an IPI_STOP by saving our current context and spinning until we
 1346  * are resumed.
 1347  */
 1348 void
 1349 cpustop_handler(void)
 1350 {
 1351         int cpu = PCPU_GET(cpuid);
 1352         int cpumask = PCPU_GET(cpumask);
 1353 
 1354         savectx(&stoppcbs[cpu]);
 1355 
 1356         /* Indicate that we are stopped */
 1357         atomic_set_int(&stopped_cpus, cpumask);
 1358 
 1359         /* Wait for restart */
 1360         while (!(started_cpus & cpumask))
 1361             ia32_pause();
 1362 
 1363         atomic_clear_int(&started_cpus, cpumask);
 1364         atomic_clear_int(&stopped_cpus, cpumask);
 1365 
 1366         if (cpu == 0 && cpustop_restartfunc != NULL) {
 1367                 cpustop_restartfunc();
 1368                 cpustop_restartfunc = NULL;
 1369         }
 1370 }
 1371 
 1372 /*
 1373  * This is called once the rest of the system is up and running and we're
 1374  * ready to let the AP's out of the pen.
 1375  */
 1376 static void
 1377 release_aps(void *dummy __unused)
 1378 {
 1379 
 1380         if (mp_ncpus == 1) 
 1381                 return;
 1382         atomic_store_rel_int(&aps_ready, 1);
 1383         while (smp_started == 0)
 1384                 ia32_pause();
 1385 }
 1386 SYSINIT(start_aps, SI_SUB_SMP, SI_ORDER_FIRST, release_aps, NULL);
 1387 
 1388 static int
 1389 sysctl_hlt_cpus(SYSCTL_HANDLER_ARGS)
 1390 {
 1391         u_int mask;
 1392         int error;
 1393 
 1394         mask = hlt_cpus_mask;
 1395         error = sysctl_handle_int(oidp, &mask, 0, req);
 1396         if (error || !req->newptr)
 1397                 return (error);
 1398 
 1399         if (logical_cpus_mask != 0 &&
 1400             (mask & logical_cpus_mask) == logical_cpus_mask)
 1401                 hlt_logical_cpus = 1;
 1402         else
 1403                 hlt_logical_cpus = 0;
 1404 
 1405         if (! hyperthreading_allowed)
 1406                 mask |= hyperthreading_cpus_mask;
 1407 
 1408         if ((mask & all_cpus) == all_cpus)
 1409                 mask &= ~(1<<0);
 1410         hlt_cpus_mask = mask;
 1411         return (error);
 1412 }
 1413 SYSCTL_PROC(_machdep, OID_AUTO, hlt_cpus, CTLTYPE_INT|CTLFLAG_RW,
 1414     0, 0, sysctl_hlt_cpus, "IU",
 1415     "Bitmap of CPUs to halt.  101 (binary) will halt CPUs 0 and 2.");
 1416 
 1417 static int
 1418 sysctl_hlt_logical_cpus(SYSCTL_HANDLER_ARGS)
 1419 {
 1420         int disable, error;
 1421 
 1422         disable = hlt_logical_cpus;
 1423         error = sysctl_handle_int(oidp, &disable, 0, req);
 1424         if (error || !req->newptr)
 1425                 return (error);
 1426 
 1427         if (disable)
 1428                 hlt_cpus_mask |= logical_cpus_mask;
 1429         else
 1430                 hlt_cpus_mask &= ~logical_cpus_mask;
 1431 
 1432         if (! hyperthreading_allowed)
 1433                 hlt_cpus_mask |= hyperthreading_cpus_mask;
 1434 
 1435         if ((hlt_cpus_mask & all_cpus) == all_cpus)
 1436                 hlt_cpus_mask &= ~(1<<0);
 1437 
 1438         hlt_logical_cpus = disable;
 1439         return (error);
 1440 }
 1441 
 1442 static int
 1443 sysctl_hyperthreading_allowed(SYSCTL_HANDLER_ARGS)
 1444 {
 1445         int allowed, error;
 1446 
 1447         allowed = hyperthreading_allowed;
 1448         error = sysctl_handle_int(oidp, &allowed, 0, req);
 1449         if (error || !req->newptr)
 1450                 return (error);
 1451 
 1452 #ifdef SCHED_ULE
 1453         /*
 1454          * SCHED_ULE doesn't allow enabling/disabling HT cores at
 1455          * run-time.
 1456          */
 1457         if (allowed != hyperthreading_allowed)
 1458                 return (ENOTSUP);
 1459         return (error);
 1460 #endif
 1461 
 1462         if (allowed)
 1463                 hlt_cpus_mask &= ~hyperthreading_cpus_mask;
 1464         else
 1465                 hlt_cpus_mask |= hyperthreading_cpus_mask;
 1466 
 1467         if (logical_cpus_mask != 0 &&
 1468             (hlt_cpus_mask & logical_cpus_mask) == logical_cpus_mask)
 1469                 hlt_logical_cpus = 1;
 1470         else
 1471                 hlt_logical_cpus = 0;
 1472 
 1473         if ((hlt_cpus_mask & all_cpus) == all_cpus)
 1474                 hlt_cpus_mask &= ~(1<<0);
 1475 
 1476         hyperthreading_allowed = allowed;
 1477         return (error);
 1478 }
 1479 
 1480 static void
 1481 cpu_hlt_setup(void *dummy __unused)
 1482 {
 1483 
 1484         if (logical_cpus_mask != 0) {
 1485                 TUNABLE_INT_FETCH("machdep.hlt_logical_cpus",
 1486                     &hlt_logical_cpus);
 1487                 sysctl_ctx_init(&logical_cpu_clist);
 1488                 SYSCTL_ADD_PROC(&logical_cpu_clist,
 1489                     SYSCTL_STATIC_CHILDREN(_machdep), OID_AUTO,
 1490                     "hlt_logical_cpus", CTLTYPE_INT|CTLFLAG_RW, 0, 0,
 1491                     sysctl_hlt_logical_cpus, "IU", "");
 1492                 SYSCTL_ADD_UINT(&logical_cpu_clist,
 1493                     SYSCTL_STATIC_CHILDREN(_machdep), OID_AUTO,
 1494                     "logical_cpus_mask", CTLTYPE_INT|CTLFLAG_RD,
 1495                     &logical_cpus_mask, 0, "");
 1496 
 1497                 if (hlt_logical_cpus)
 1498                         hlt_cpus_mask |= logical_cpus_mask;
 1499 
 1500                 /*
 1501                  * If necessary for security purposes, force
 1502                  * hyperthreading off, regardless of the value
 1503                  * of hlt_logical_cpus.
 1504                  */
 1505                 if (hyperthreading_cpus_mask) {
 1506                         SYSCTL_ADD_PROC(&logical_cpu_clist,
 1507                             SYSCTL_STATIC_CHILDREN(_machdep), OID_AUTO,
 1508                             "hyperthreading_allowed", CTLTYPE_INT|CTLFLAG_RW,
 1509                             0, 0, sysctl_hyperthreading_allowed, "IU", "");
 1510                         if (! hyperthreading_allowed)
 1511                                 hlt_cpus_mask |= hyperthreading_cpus_mask;
 1512                 }
 1513         }
 1514 }
 1515 SYSINIT(cpu_hlt, SI_SUB_SMP, SI_ORDER_ANY, cpu_hlt_setup, NULL);
 1516 
 1517 int
 1518 mp_grab_cpu_hlt(void)
 1519 {
 1520         u_int mask = PCPU_GET(cpumask);
 1521 #ifdef MP_WATCHDOG
 1522         u_int cpuid = PCPU_GET(cpuid);
 1523 #endif
 1524         int retval;
 1525 
 1526 #ifdef MP_WATCHDOG
 1527         ap_watchdog(cpuid);
 1528 #endif
 1529 
 1530         retval = mask & hlt_cpus_mask;
 1531         while (mask & hlt_cpus_mask)
 1532                 __asm __volatile("sti; hlt" : : : "memory");
 1533         return (retval);
 1534 }
 1535 
 1536 #ifdef COUNT_IPIS
 1537 /*
 1538  * Setup interrupt counters for IPI handlers.
 1539  */
 1540 static void
 1541 mp_ipi_intrcnt(void *dummy)
 1542 {
 1543         char buf[64];
 1544         int i;
 1545 
 1546         for (i = 0; i < mp_maxid; i++) {
 1547                 if (CPU_ABSENT(i))
 1548                         continue;
 1549                 snprintf(buf, sizeof(buf), "cpu%d: invltlb", i);
 1550                 intrcnt_add(buf, &ipi_invltlb_counts[i]);
 1551                 snprintf(buf, sizeof(buf), "cpu%d: invlrng", i);
 1552                 intrcnt_add(buf, &ipi_invlrng_counts[i]);
 1553                 snprintf(buf, sizeof(buf), "cpu%d: invlpg", i);
 1554                 intrcnt_add(buf, &ipi_invlpg_counts[i]);
 1555                 snprintf(buf, sizeof(buf), "cpu%d: preempt", i);
 1556                 intrcnt_add(buf, &ipi_preempt_counts[i]);
 1557                 snprintf(buf, sizeof(buf), "cpu%d: ast", i);
 1558                 intrcnt_add(buf, &ipi_ast_counts[i]);
 1559                 snprintf(buf, sizeof(buf), "cpu%d: rendezvous", i);
 1560                 intrcnt_add(buf, &ipi_rendezvous_counts[i]);
 1561                 snprintf(buf, sizeof(buf), "cpu%d: lazypmap", i);
 1562                 intrcnt_add(buf, &ipi_lazypmap_counts[i]);
 1563         }               
 1564 }
 1565 SYSINIT(mp_ipi_intrcnt, SI_SUB_INTR, SI_ORDER_MIDDLE, mp_ipi_intrcnt, NULL);
 1566 #endif

Cache object: b2f41816e7c031883978ad599573bcc0


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.