FreeBSD/Linux Kernel Cross Reference
sys/i386/isa/clock.c

     /*-
      * Copyright (c) 1990 The Regents of the University of California.
      * All rights reserved.
      *
      * This code is derived from software contributed to Berkeley by
      * William Jolitz and Don Ahn.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. All advertising materials mentioning features or use of this software
     *    must display the following acknowledgement:
     *      This product includes software developed by the University of
     *      California, Berkeley and its contributors.
     * 4. Neither the name of the University nor the names of its contributors
     *    may be used to endorse or promote products derived from this software
     *    without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.
     *
     *      from: @(#)clock.c       7.2 (Berkeley) 5/12/91
     * $FreeBSD: src/sys/i386/isa/clock.c,v 1.72.2.5 1999/09/05 08:12:28 peter Exp $
     */
    
    /*
     * Routines to handle clock hardware.
     */
    
    /*
     * inittodr, settodr and support routines written
     * by Christoph Robitschko <chmr@edvz.tu-graz.ac.at>
     *
     * reintroduced and updated by Chris Stenton <chris@gnome.co.uk> 8/10/94
     */
    
    #include "opt_clock.h"
    #include "opt_cpu.h"
    
    #include <sys/param.h>
    #include <sys/systm.h>
    #include <sys/time.h>
    #include <sys/kernel.h>
    #include <sys/sysctl.h>
    
    #include <machine/clock.h>
    #ifdef CLK_CALIBRATION_LOOP
    #include <machine/cons.h>
    #endif
    #include <machine/cpu.h>
    #include <machine/frame.h>
    
    #include <i386/isa/icu.h>
    #include <i386/isa/isa.h>
    #include <i386/isa/isa_device.h>
    #include <i386/isa/rtc.h>
    #include <i386/isa/timerreg.h>
    
    /*
     * 32-bit time_t's can't reach leap years before 1904 or after 2036, so we
     * can use a simple formula for leap years.
     */
    #define LEAPYEAR(y) ((u_int)(y) % 4 == 0)
    #define DAYSPERYEAR   (31+28+31+30+31+30+31+31+30+31+30+31)
    
    #define TIMER_DIV(x) ((timer_freq + (x) / 2) / (x))
    
    /*
     * Time in timer cycles that it takes for microtime() to disable interrupts
     * and latch the count.  microtime() currently uses "cli; outb ..." so it
     * normally takes less than 2 timer cycles.  Add a few for cache misses.
     * Add a few more to allow for latency in bogus calls to microtime() with
     * interrupts already disabled.
     */
    #define TIMER0_LATCH_COUNT      20
    
    /*
     * Maximum frequency that we are willing to allow for timer0.  Must be
     * low enough to guarantee that the timer interrupt handler returns
     * before the next timer interrupt.  Must result in a lower TIMER_DIV
     * value than TIMER0_LATCH_COUNT so that we don't have to worry about
     * underflow in the calculation of timer0_overflow_threshold.
     */
    #define TIMER0_MAX_FREQ         20000
    
   int     adjkerntz;              /* local offset from GMT in seconds */
   int     disable_rtc_set;        /* disable resettodr() if != 0 */
   u_int   idelayed;
   #if defined(I586_CPU) || defined(I686_CPU)
   u_int   i586_ctr_bias;
   u_int   i586_ctr_comultiplier;
   u_int   i586_ctr_freq;
   u_int   i586_ctr_multiplier;
   #endif
   int     statclock_disable;
   u_int   stat_imask = SWI_CLOCK_MASK;
   #ifdef TIMER_FREQ
   u_int   timer_freq = TIMER_FREQ;
   #else
   u_int   timer_freq = 1193182;
   #endif
   int     timer0_max_count;
   u_int   timer0_overflow_threshold;
   u_int   timer0_prescaler_count;
   int     wall_cmos_clock;        /* wall CMOS clock assumed if != 0 */
   
   static  int     beeping = 0;
   static  u_int   clk_imask = HWI_MASK | SWI_MASK;
   static  const u_char daysinmonth[] = {31,28,31,30,31,30,31,31,30,31,30,31};
   static  u_int   hardclock_max_count;
   /*
    * XXX new_function and timer_func should not handle clockframes, but
    * timer_func currently needs to hold hardclock to handle the
    * timer0_state == 0 case.  We should use register_intr()/unregister_intr()
    * to switch between clkintr() and a slightly different timerintr().
    */
   static  void    (*new_function) __P((struct clockframe *frame));
   static  u_int   new_rate;
   static  u_char  rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
   static  u_char  rtc_statusb = RTCSB_24HR | RTCSB_PINTR;
   
   /* Values for timerX_state: */
   #define RELEASED        0
   #define RELEASE_PENDING 1
   #define ACQUIRED        2
   #define ACQUIRE_PENDING 3
   
   static  u_char  timer0_state;
   static  u_char  timer2_state;
   static  void    (*timer_func) __P((struct clockframe *frame)) = hardclock;
   
   #if defined(I586_CPU) || defined(I686_CPU)
   static  void    set_i586_ctr_freq(u_int i586_freq, u_int i8254_freq);
   #endif
   static  void    set_timer_freq(u_int freq, int intr_freq);
   
   static void
   clkintr(struct clockframe frame)
   {
           timer_func(&frame);
           switch (timer0_state) {
   
           case RELEASED:
                   setdelayed();
                   break;
   
           case ACQUIRED:
                   if ((timer0_prescaler_count += timer0_max_count)
                       >= hardclock_max_count) {
                           hardclock(&frame);
                           setdelayed();
                           timer0_prescaler_count -= hardclock_max_count;
                   }
                   break;
   
           case ACQUIRE_PENDING:
                   setdelayed();
                   timer0_max_count = TIMER_DIV(new_rate);
                   timer0_overflow_threshold =
                           timer0_max_count - TIMER0_LATCH_COUNT;
                   disable_intr();
                   outb(TIMER_MODE, TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT);
                   outb(TIMER_CNTR0, timer0_max_count & 0xff);
                   outb(TIMER_CNTR0, timer0_max_count >> 8);
                   enable_intr();
                   timer0_prescaler_count = 0;
                   timer_func = new_function;
                   timer0_state = ACQUIRED;
                   break;
   
           case RELEASE_PENDING:
                   if ((timer0_prescaler_count += timer0_max_count)
                       >= hardclock_max_count) {
                           hardclock(&frame);
                           setdelayed();
                           timer0_max_count = hardclock_max_count;
                           timer0_overflow_threshold =
                                   timer0_max_count - TIMER0_LATCH_COUNT;
                           disable_intr();
                           outb(TIMER_MODE,
                                TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT);
                           outb(TIMER_CNTR0, timer0_max_count & 0xff);
                           outb(TIMER_CNTR0, timer0_max_count >> 8);
                           enable_intr();
                           /*
                            * See microtime.s for this magic.
                            */
                           time.tv_usec += (27465 *
                                   (timer0_prescaler_count - hardclock_max_count))
                                   >> 15;
                           if (time.tv_usec >= 1000000)
                                   time.tv_usec -= 1000000;
                           timer0_prescaler_count = 0;
                           timer_func = hardclock;
                           timer0_state = RELEASED;
                   }
                   break;
           }
   }
   
   /*
    * The acquire and release functions must be called at ipl >= splclock().
    */
   int
   acquire_timer0(int rate, void (*function) __P((struct clockframe *frame)))
   {
           static int old_rate;
   
           if (rate <= 0 || rate > TIMER0_MAX_FREQ)
                   return (-1);
           switch (timer0_state) {
   
           case RELEASED:
                   timer0_state = ACQUIRE_PENDING;
                   break;
   
           case RELEASE_PENDING:
                   if (rate != old_rate)
                           return (-1);
                   /*
                    * The timer has been released recently, but is being
                    * re-acquired before the release completed.  In this
                    * case, we simply reclaim it as if it had not been
                    * released at all.
                    */
                   timer0_state = ACQUIRED;
                   break;
   
           default:
                   return (-1);    /* busy */
           }
           new_function = function;
           old_rate = new_rate = rate;
           return (0);
   }
   
   int
   acquire_timer2(int mode)
   {
   
           if (timer2_state != RELEASED)
                   return (-1);
           timer2_state = ACQUIRED;
   
           /*
            * This access to the timer registers is as atomic as possible
            * because it is a single instruction.  We could do better if we
            * knew the rate.  Use of splclock() limits glitches to 10-100us,
            * and this is probably good enough for timer2, so we aren't as
            * careful with it as with timer0.
            */
           outb(TIMER_MODE, TIMER_SEL2 | (mode & 0x3f));
   
           return (0);
   }
   
   int
   release_timer0()
   {
           switch (timer0_state) {
   
           case ACQUIRED:
                   timer0_state = RELEASE_PENDING;
                   break;
   
           case ACQUIRE_PENDING:
                   /* Nothing happened yet, release quickly. */
                   timer0_state = RELEASED;
                   break;
   
           default:
                   return (-1);
           }
           return (0);
   }
   
   int
   release_timer2()
   {
   
           if (timer2_state != ACQUIRED)
                   return (-1);
           timer2_state = RELEASED;
           outb(TIMER_MODE, TIMER_SEL2 | TIMER_SQWAVE | TIMER_16BIT);
           return (0);
   }
   
   /*
    * This routine receives statistical clock interrupts from the RTC.
    * As explained above, these occur at 128 interrupts per second.
    * When profiling, we receive interrupts at a rate of 1024 Hz.
    *
    * This does not actually add as much overhead as it sounds, because
    * when the statistical clock is active, the hardclock driver no longer
    * needs to keep (inaccurate) statistics on its own.  This decouples
    * statistics gathering from scheduling interrupts.
    *
    * The RTC chip requires that we read status register C (RTC_INTR)
    * to acknowledge an interrupt, before it will generate the next one.
    * Under high interrupt load, rtcintr() can be indefinitely delayed and
    * the clock can tick immediately after the read from RTC_INTR.  In this
    * case, the mc146818A interrupt signal will not drop for long enough
    * to register with the 8259 PIC.  If an interrupt is missed, the stat
    * clock will halt, considerably degrading system performance.  This is
    * why we use 'while' rather than a more straightforward 'if' below.
    * Stat clock ticks can still be lost, causing minor loss of accuracy
    * in the statistics, but the stat clock will no longer stop.
    */
   static void
   rtcintr(struct clockframe frame)
   {
           while (rtcin(RTC_INTR) & RTCIR_PERIOD)
                   statclock(&frame);
   }
   
   #include "opt_ddb.h"
   #ifdef DDB
   #include <ddb/ddb.h>
   
   DB_SHOW_COMMAND(rtc, rtc)
   {
           printf("%02x/%02x/%02x %02x:%02x:%02x, A = %02x, B = %02x, C = %02x\n",
                  rtcin(RTC_YEAR), rtcin(RTC_MONTH), rtcin(RTC_DAY),
                  rtcin(RTC_HRS), rtcin(RTC_MIN), rtcin(RTC_SEC),
                  rtcin(RTC_STATUSA), rtcin(RTC_STATUSB), rtcin(RTC_INTR));
   }
   #endif /* DDB */
   
   static int
   getit(void)
   {
           u_long ef;
           int high, low;
   
           ef = read_eflags();
           disable_intr();
   
           /* Select timer0 and latch counter value. */
           outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH);
   
           low = inb(TIMER_CNTR0);
           high = inb(TIMER_CNTR0);
   
           write_eflags(ef);
           return ((high << 8) | low);
   }
   
   /*
    * Wait "n" microseconds.
    * Relies on timer 1 counting down from (timer_freq / hz)
    * Note: timer had better have been programmed before this is first used!
    */
   void
   DELAY(int n)
   {
           int delta, prev_tick, tick, ticks_left;
   
   #ifdef DELAYDEBUG
           int getit_calls = 1;
           int n1;
           static int state = 0;
   
           if (state == 0) {
                   state = 1;
                   for (n1 = 1; n1 <= 10000000; n1 *= 10)
                           DELAY(n1);
                   state = 2;
           }
           if (state == 1)
                   printf("DELAY(%d)...", n);
   #endif
           /*
            * Guard against the timer being uninitialized if we are called
            * early for console i/o.
            */
           if (timer0_max_count == 0)
                   set_timer_freq(timer_freq, hz);
   
           /*
            * Read the counter first, so that the rest of the setup overhead is
            * counted.  Guess the initial overhead is 20 usec (on most systems it
            * takes about 1.5 usec for each of the i/o's in getit().  The loop
            * takes about 6 usec on a 486/33 and 13 usec on a 386/20.  The
            * multiplications and divisions to scale the count take a while).
            */
           prev_tick = getit();
           n -= 0;                 /* XXX actually guess no initial overhead */
           /*
            * Calculate (n * (timer_freq / 1e6)) without using floating point
            * and without any avoidable overflows.
            */
           if (n <= 0)
                   ticks_left = 0;
           else if (n < 256)
                   /*
                    * Use fixed point to avoid a slow division by 1000000.
                    * 39099 = 1193182 * 2^15 / 10^6 rounded to nearest.
                    * 2^15 is the first power of 2 that gives exact results
                    * for n between 0 and 256.
                    */
                   ticks_left = ((u_int)n * 39099 + (1 << 15) - 1) >> 15;
           else
                   /*
                    * Don't bother using fixed point, although gcc-2.7.2
                    * generates particularly poor code for the long long
                    * division, since even the slow way will complete long
                    * before the delay is up (unless we're interrupted).
                    */
                   ticks_left = ((u_int)n * (long long)timer_freq + 999999)
                                / 1000000;
   
           while (ticks_left > 0) {
                   tick = getit();
   #ifdef DELAYDEBUG
                   ++getit_calls;
   #endif
                   delta = prev_tick - tick;
                   prev_tick = tick;
                   if (delta < 0) {
                           delta += timer0_max_count;
                           /*
                            * Guard against timer0_max_count being wrong.
                            * This shouldn't happen in normal operation,
                            * but it may happen if set_timer_freq() is
                            * traced.
                            */
                           if (delta < 0)
                                   delta = 0;
                   }
                   ticks_left -= delta;
           }
   #ifdef DELAYDEBUG
           if (state == 1)
                   printf(" %d calls to getit() at %d usec each\n",
                          getit_calls, (n + 5) / getit_calls);
   #endif
   }
   
   static void
   sysbeepstop(void *chan)
   {
           outb(IO_PPI, inb(IO_PPI)&0xFC); /* disable counter2 output to speaker */
           release_timer2();
           beeping = 0;
   }
   
   int
   sysbeep(int pitch, int period)
   {
           int x = splclock();
   
           if (acquire_timer2(TIMER_SQWAVE|TIMER_16BIT))
                   if (!beeping) {
                           /* Something else owns it. */
                           splx(x);
                           return (-1); /* XXX Should be EBUSY, but nobody cares anyway. */
                   }
           disable_intr();
           outb(TIMER_CNTR2, pitch);
           outb(TIMER_CNTR2, (pitch>>8));
           enable_intr();
           if (!beeping) {
                   /* enable counter2 output to speaker */
                   outb(IO_PPI, inb(IO_PPI) | 3);
                   beeping = period;
                   timeout(sysbeepstop, (void *)NULL, period);
           }
           splx(x);
           return (0);
   }
   
   /*
    * RTC support routines
    */
   
   int
   rtcin(reg)
           int reg;
   {
           u_char val;
   
           outb(IO_RTC, reg);
           inb(0x84);
           val = inb(IO_RTC + 1);
           inb(0x84);
           return (val);
   }
   
   static __inline void
   writertc(u_char reg, u_char val)
   {
           outb(IO_RTC, reg);
           outb(IO_RTC + 1, val);
   }
   
   static __inline int
   readrtc(int port)
   {
           return(bcd2bin(rtcin(port)));
   }
   
   static u_int
   calibrate_clocks(void)
   {
           u_int count, prev_count, tot_count;
           int sec, start_sec, timeout;
   
           if (bootverbose)
                   printf("Calibrating clock(s) ... ");
           if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
                   goto fail;
           timeout = 100000000;
   
           /* Read the mc146818A seconds counter. */
           for (;;) {
                   if (!(rtcin(RTC_STATUSA) & RTCSA_TUP)) {
                           sec = rtcin(RTC_SEC);
                           break;
                   }
                   if (--timeout == 0)
                           goto fail;
           }
   
           /* Wait for the mC146818A seconds counter to change. */
           start_sec = sec;
           for (;;) {
                   if (!(rtcin(RTC_STATUSA) & RTCSA_TUP)) {
                           sec = rtcin(RTC_SEC);
                           if (sec != start_sec)
                                   break;
                   }
                   if (--timeout == 0)
                           goto fail;
           }
   
           /* Start keeping track of the i8254 counter. */
           prev_count = getit();
           if (prev_count == 0 || prev_count > timer0_max_count)
                   goto fail;
           tot_count = 0;
   
   #if defined(I586_CPU) || defined(I686_CPU)
           if (cpu_class == CPUCLASS_586 || cpu_class == CPUCLASS_686)
                   wrmsr(0x10, 0LL);       /* XXX 0x10 is the MSR for the TSC */
   #endif
   
           /*
            * Wait for the mc146818A seconds counter to change.  Read the i8254
            * counter for each iteration since this is convenient and only
            * costs a few usec of inaccuracy. The timing of the final reads
            * of the counters almost matches the timing of the initial reads,
            * so the main cause of inaccuracy is the varying latency from 
            * inside getit() or rtcin(RTC_STATUSA) to the beginning of the
            * rtcin(RTC_SEC) that returns a changed seconds count.  The
            * maximum inaccuracy from this cause is < 10 usec on 486's.
            */
           start_sec = sec;
           for (;;) {
                   if (!(rtcin(RTC_STATUSA) & RTCSA_TUP))
                           sec = rtcin(RTC_SEC);
                   count = getit();
                   if (count == 0 || count > timer0_max_count)
                           goto fail;
                   if (count > prev_count)
                           tot_count += prev_count - (count - timer0_max_count);
                   else
                           tot_count += prev_count - count;
                   prev_count = count;
                   if (sec != start_sec)
                           break;
                   if (--timeout == 0)
                           goto fail;
           }
   
   #if defined(I586_CPU) || defined(I686_CPU)
           /*
            * Read the cpu cycle counter.  The timing considerations are
            * similar to those for the i8254 clock.
            */
           if (cpu_class == CPUCLASS_586 || cpu_class == CPUCLASS_686) {
                   set_i586_ctr_freq((u_int)rdtsc(), tot_count);
                   if (bootverbose)
                           printf("i586 clock: %u Hz, ", i586_ctr_freq);
           }
   #endif
   
           if (bootverbose)
                   printf("i8254 clock: %u Hz\n", tot_count);
           return (tot_count);
   
   fail:
           if (bootverbose)
                   printf("failed, using default i8254 clock of %u Hz\n",
                          timer_freq);
           return (timer_freq);
   }
   
   static void
   set_timer_freq(u_int freq, int intr_freq)
   {
           u_long ef;
   
           ef = read_eflags();
           disable_intr();
           timer_freq = freq;
           timer0_max_count = hardclock_max_count = TIMER_DIV(intr_freq);
           timer0_overflow_threshold = timer0_max_count - TIMER0_LATCH_COUNT;
           outb(TIMER_MODE, TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT);
           outb(TIMER_CNTR0, timer0_max_count & 0xff);
           outb(TIMER_CNTR0, timer0_max_count >> 8);
           write_eflags(ef);
   }
   
   /*
    * Initialize 8253 timer 0 early so that it can be used in DELAY().
    * XXX initialization of other timers is unintentionally left blank.
    */
   void
   startrtclock()
   {
           u_int delta, freq;
   
           writertc(RTC_STATUSA, rtc_statusa);
           writertc(RTC_STATUSB, RTCSB_24HR);
   
           set_timer_freq(timer_freq, hz);
           freq = calibrate_clocks();
   #ifdef CLK_CALIBRATION_LOOP
           if (bootverbose) {
                   printf(
                   "Press a key on the console to abort clock calibration\n");
                   while (cncheckc() == -1)
                           calibrate_clocks();
           }
   #endif
   
           /*
            * Use the calibrated i8254 frequency if it seems reasonable.
            * Otherwise use the default, and don't use the calibrated i586
            * frequency.
            */
           delta = freq > timer_freq ? freq - timer_freq : timer_freq - freq;
           if (delta < timer_freq / 100) {
   #ifndef CLK_USE_I8254_CALIBRATION
                   if (bootverbose)
                           printf(
   "CLK_USE_I8254_CALIBRATION not specified - using default frequency\n");
                   freq = timer_freq;
   #endif
                   timer_freq = freq;
           } else {
                   if (bootverbose)
                           printf(
                       "%d Hz differs from default of %d Hz by more than 1%%\n",
                                  freq, timer_freq);
   #if defined(I586_CPU) || defined(I686_CPU)
                   i586_ctr_freq = 0;
   #endif
           }
   
           set_timer_freq(timer_freq, hz);
   
   #if defined(I586_CPU) || defined(I686_CPU)
   #ifndef CLK_USE_I586_CALIBRATION
           if (i586_ctr_freq != 0) {
                   if (bootverbose)
                           printf(
   "CLK_USE_I586_CALIBRATION not specified - using old calibration method\n");
                   i586_ctr_freq = 0;
           }
   #endif
           if (i586_ctr_freq == 0 &&
               (cpu_class == CPUCLASS_586 || cpu_class == CPUCLASS_686)) {
                   /*
                    * Calibration of the i586 clock relative to the mc146818A
                    * clock failed.  Do a less accurate calibration relative
                    * to the i8254 clock.
                    */
                   wrmsr(0x10, 0LL);       /* XXX */
                   DELAY(1000000);
                   set_i586_ctr_freq((u_int)rdtsc(), timer_freq);
   #ifdef CLK_USE_I586_CALIBRATION
                   if (bootverbose)
                           printf("i586 clock: %u Hz\n", i586_ctr_freq);
   #endif
           }
   #endif
   }
   
   /*
    * Initialize the time of day register, based on the time base which is, e.g.
    * from a filesystem.
    */
   void
   inittodr(time_t base)
   {
           unsigned long   sec, days;
           int             yd;
           int             year, month;
           int             y, m, s;
   
           s = splclock();
           time.tv_sec  = base;
           time.tv_usec = 0;
           splx(s);
   
           /* Look if we have a RTC present and the time is valid */
           if (!(rtcin(RTC_STATUSD) & RTCSD_PWR))
                   goto wrong_time;
   
           /* wait for time update to complete */
           /* If RTCSA_TUP is zero, we have at least 244us before next update */
           while (rtcin(RTC_STATUSA) & RTCSA_TUP);
   
           days = 0;
   #ifdef USE_RTC_CENTURY
           year = readrtc(RTC_YEAR) + readrtc(RTC_CENTURY) * 100;
   #else
           year = readrtc(RTC_YEAR) + 1900;
           if (year < 1970)
                   year += 100;
   #endif
           if (year < 1970)
                   goto wrong_time;
           month = readrtc(RTC_MONTH);
           for (m = 1; m < month; m++)
                   days += daysinmonth[m-1];
           if ((month > 2) && LEAPYEAR(year))
                   days ++;
           days += readrtc(RTC_DAY) - 1;
           yd = days;
           for (y = 1970; y < year; y++)
                   days += DAYSPERYEAR + LEAPYEAR(y);
           sec = ((( days * 24 +
                     readrtc(RTC_HRS)) * 60 +
                     readrtc(RTC_MIN)) * 60 +
                     readrtc(RTC_SEC));
           /* sec now contains the number of seconds, since Jan 1 1970,
              in the local time zone */
   
           sec += tz.tz_minuteswest * 60 + (wall_cmos_clock ? adjkerntz : 0);
   
           s = splclock();
           time.tv_sec = sec;
           splx(s);
           return;
   
   wrong_time:
           printf("Invalid time in real time clock.\n");
           printf("Check and reset the date immediately!\n");
   }
   
   /*
    * Write system time back to RTC
    */
   void
   resettodr()
   {
           unsigned long   tm;
           int             y, m, s;
   
           if (disable_rtc_set)
                   return;
   
           s = splclock();
           tm = time.tv_sec;
           splx(s);
   
           /* Disable RTC updates and interrupts. */
           writertc(RTC_STATUSB, RTCSB_HALT | RTCSB_24HR);
   
           /* Calculate local time to put in RTC */
   
           tm -= tz.tz_minuteswest * 60 + (wall_cmos_clock ? adjkerntz : 0);
   
           writertc(RTC_SEC, bin2bcd(tm%60)); tm /= 60;    /* Write back Seconds */
           writertc(RTC_MIN, bin2bcd(tm%60)); tm /= 60;    /* Write back Minutes */
           writertc(RTC_HRS, bin2bcd(tm%24)); tm /= 24;    /* Write back Hours   */
   
           /* We have now the days since 01-01-1970 in tm */
           writertc(RTC_WDAY, (tm+4)%7);                   /* Write back Weekday */
           for (y = 1970, m = DAYSPERYEAR + LEAPYEAR(y);
                tm >= m;
                y++,      m = DAYSPERYEAR + LEAPYEAR(y))
                tm -= m;
   
           /* Now we have the years in y and the day-of-the-year in tm */
           writertc(RTC_YEAR, bin2bcd(y%100));             /* Write back Year    */
   #ifdef USE_RTC_CENTURY
           writertc(RTC_CENTURY, bin2bcd(y/100));          /* ... and Century    */
   #endif
           for (m = 0; ; m++) {
                   int ml;
   
                   ml = daysinmonth[m];
                   if (m == 1 && LEAPYEAR(y))
                           ml++;
                   if (tm < ml)
                           break;
                   tm -= ml;
           }
   
           writertc(RTC_MONTH, bin2bcd(m + 1));            /* Write back Month   */
           writertc(RTC_DAY, bin2bcd(tm + 1));             /* Write back Month Day */
   
           /* Reenable RTC updates and interrupts. */
           writertc(RTC_STATUSB, rtc_statusb);
   }
   
   /*
    * Start both clocks running.
    */
   void
   cpu_initclocks()
   {
           int diag;
   
           if (statclock_disable) {
                   /*
                    * The stat interrupt mask is different without the
                    * statistics clock.  Also, don't set the interrupt
                    * flag which would normally cause the RTC to generate
                    * interrupts.
                    */
                   stat_imask = HWI_MASK | SWI_MASK;
                   rtc_statusb = RTCSB_24HR;
           } else {
                   /* Setting stathz to nonzero early helps avoid races. */
                   stathz = RTC_NOPROFRATE;
                   profhz = RTC_PROFRATE;
           }
   
           /* Finish initializing 8253 timer 0. */
           register_intr(/* irq */ 0, /* XXX id */ 0, /* flags */ 0,
                         /* XXX */ (inthand2_t *)clkintr, &clk_imask,
                         /* unit */ 0);
           INTREN(IRQ0);
   #if defined(I586_CPU) || defined(I686_CPU)
           /*
            * Finish setting up anti-jitter measures.
            */
           if (i586_ctr_freq != 0)
                   i586_ctr_bias = rdtsc();
   #endif
   
           /* Initialize RTC. */
           writertc(RTC_STATUSA, rtc_statusa);
           writertc(RTC_STATUSB, RTCSB_24HR);
   
           /* Don't bother enabling the statistics clock. */
           if (statclock_disable)
                   return;
           diag = rtcin(RTC_DIAG);
           if (diag != 0)
                   printf("RTC BIOS diagnostic error %b\n", diag, RTCDG_BITS);
           register_intr(/* irq */ 8, /* XXX id */ 1, /* flags */ 0,
                         /* XXX */ (inthand2_t *)rtcintr, &stat_imask,
                         /* unit */ 0);
           INTREN(IRQ8);
           writertc(RTC_STATUSB, rtc_statusb);
   }
   
   void
   setstatclockrate(int newhz)
   {
           if (newhz == RTC_PROFRATE)
                   rtc_statusa = RTCSA_DIVIDER | RTCSA_PROF;
           else
                   rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF;
           writertc(RTC_STATUSA, rtc_statusa);
   }
   
   static int
   sysctl_machdep_i8254_freq SYSCTL_HANDLER_ARGS
   {
           int error;
           u_int freq;
   
           /*
            * Use `i8254' instead of `timer' in external names because `timer'
            * is is too generic.  Should use it everywhere.
            */
           freq = timer_freq;
           error = sysctl_handle_opaque(oidp, &freq, sizeof freq, req);
           if (error == 0 && req->newptr != NULL) {
                   if (timer0_state != 0)
                           return (EBUSY); /* too much trouble to handle */
                   set_timer_freq(freq, hz);
   #if defined(I586_CPU) || defined(I686_CPU)
                   set_i586_ctr_freq(i586_ctr_freq, timer_freq);
   #endif
           }
           return (error);
   }
   
   SYSCTL_PROC(_machdep, OID_AUTO, i8254_freq, CTLTYPE_INT | CTLFLAG_RW,
               0, sizeof(u_int), sysctl_machdep_i8254_freq, "I", "");
   
   #if defined(I586_CPU) || defined(I686_CPU)
   static void
   set_i586_ctr_freq(u_int i586_freq, u_int i8254_freq)
   {
           u_int comultiplier, multiplier;
           u_long ef;
   
           if (i586_freq == 0) {
                   i586_ctr_freq = i586_freq;
                   return;
           }
           comultiplier = ((unsigned long long)i586_freq
                           << I586_CTR_COMULTIPLIER_SHIFT) / i8254_freq;
           multiplier = (1000000LL << I586_CTR_MULTIPLIER_SHIFT) / i586_freq;
           ef = read_eflags();
           disable_intr();
           i586_ctr_freq = i586_freq;
           i586_ctr_comultiplier = comultiplier;
           i586_ctr_multiplier = multiplier;
           write_eflags(ef);
   }
   
   static int
   sysctl_machdep_i586_freq SYSCTL_HANDLER_ARGS
   {
           int error;
           u_int freq;
   
           if (cpu_class != CPUCLASS_586 && cpu_class != CPUCLASS_686)
                   return (EOPNOTSUPP);
           freq = i586_ctr_freq;
           error = sysctl_handle_opaque(oidp, &freq, sizeof freq, req);
           if (error == 0 && req->newptr != NULL)
                   set_i586_ctr_freq(freq, timer_freq);
           return (error);
   }
   
   SYSCTL_PROC(_machdep, OID_AUTO, i586_freq, CTLTYPE_INT | CTLFLAG_RW,
               0, sizeof(u_int), sysctl_machdep_i586_freq, "I", "");
   #endif /* defined(I586_CPU) || defined(I686_CPU) */

Cache object: 3f7bd126770300cef9e7daf8b6d39cbc