FreeBSD/Linux Kernel Cross Reference
sys/i386/isa/npx.c
1 /*-
2 * Copyright (c) 1990 William Jolitz.
3 * Copyright (c) 1991 The Regents of the University of California.
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 4. Neither the name of the University nor the names of its contributors
15 * may be used to endorse or promote products derived from this software
16 * without specific prior written permission.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 * SUCH DAMAGE.
29 *
30 * from: @(#)npx.c 7.2 (Berkeley) 5/12/91
31 */
32
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD: releng/10.2/sys/i386/isa/npx.c 280046 2015-03-15 18:42:19Z kib $");
35
36 #include "opt_cpu.h"
37 #include "opt_isa.h"
38 #include "opt_npx.h"
39
40 #include <sys/param.h>
41 #include <sys/systm.h>
42 #include <sys/bus.h>
43 #include <sys/kernel.h>
44 #include <sys/lock.h>
45 #include <sys/malloc.h>
46 #include <sys/module.h>
47 #include <sys/mutex.h>
48 #include <sys/mutex.h>
49 #include <sys/proc.h>
50 #include <sys/smp.h>
51 #include <sys/sysctl.h>
52 #include <machine/bus.h>
53 #include <sys/rman.h>
54 #ifdef NPX_DEBUG
55 #include <sys/syslog.h>
56 #endif
57 #include <sys/signalvar.h>
58 #include <vm/uma.h>
59
60 #include <machine/asmacros.h>
61 #include <machine/cputypes.h>
62 #include <machine/frame.h>
63 #include <machine/md_var.h>
64 #include <machine/pcb.h>
65 #include <machine/psl.h>
66 #include <machine/resource.h>
67 #include <machine/specialreg.h>
68 #include <machine/segments.h>
69 #include <machine/ucontext.h>
70
71 #include <machine/intr_machdep.h>
72 #ifdef XEN
73 #include <xen/xen-os.h>
74 #include <xen/hypervisor.h>
75 #endif
76
77 #ifdef DEV_ISA
78 #include <isa/isavar.h>
79 #endif
80
81 #if !defined(CPU_DISABLE_SSE) && defined(I686_CPU)
82 #define CPU_ENABLE_SSE
83 #endif
84
85 /*
86 * 387 and 287 Numeric Coprocessor Extension (NPX) Driver.
87 */
88
89 #if defined(__GNUCLIKE_ASM) && !defined(lint)
90
91 #define fldcw(cw) __asm __volatile("fldcw %0" : : "m" (cw))
92 #define fnclex() __asm __volatile("fnclex")
93 #define fninit() __asm __volatile("fninit")
94 #define fnsave(addr) __asm __volatile("fnsave %0" : "=m" (*(addr)))
95 #define fnstcw(addr) __asm __volatile("fnstcw %0" : "=m" (*(addr)))
96 #define fnstsw(addr) __asm __volatile("fnstsw %0" : "=am" (*(addr)))
97 #define fp_divide_by_0() __asm __volatile( \
98 "fldz; fld1; fdiv %st,%st(1); fnop")
99 #define frstor(addr) __asm __volatile("frstor %0" : : "m" (*(addr)))
100 #ifdef CPU_ENABLE_SSE
101 #define fxrstor(addr) __asm __volatile("fxrstor %0" : : "m" (*(addr)))
102 #define fxsave(addr) __asm __volatile("fxsave %0" : "=m" (*(addr)))
103 #define ldmxcsr(csr) __asm __volatile("ldmxcsr %0" : : "m" (csr))
104 #define stmxcsr(addr) __asm __volatile("stmxcsr %0" : : "m" (*(addr)))
105
106 static __inline void
107 xrstor(char *addr, uint64_t mask)
108 {
109 uint32_t low, hi;
110
111 low = mask;
112 hi = mask >> 32;
113 __asm __volatile("xrstor %0" : : "m" (*addr), "a" (low), "d" (hi));
114 }
115
116 static __inline void
117 xsave(char *addr, uint64_t mask)
118 {
119 uint32_t low, hi;
120
121 low = mask;
122 hi = mask >> 32;
123 __asm __volatile("xsave %0" : "=m" (*addr) : "a" (low), "d" (hi) :
124 "memory");
125 }
126
127 static __inline void
128 xsaveopt(char *addr, uint64_t mask)
129 {
130 uint32_t low, hi;
131
132 low = mask;
133 hi = mask >> 32;
134 __asm __volatile("xsaveopt %0" : "=m" (*addr) : "a" (low), "d" (hi) :
135 "memory");
136 }
137 #endif
138 #else /* !(__GNUCLIKE_ASM && !lint) */
139
140 void fldcw(u_short cw);
141 void fnclex(void);
142 void fninit(void);
143 void fnsave(caddr_t addr);
144 void fnstcw(caddr_t addr);
145 void fnstsw(caddr_t addr);
146 void fp_divide_by_0(void);
147 void frstor(caddr_t addr);
148 #ifdef CPU_ENABLE_SSE
149 void fxsave(caddr_t addr);
150 void fxrstor(caddr_t addr);
151 void ldmxcsr(u_int csr);
152 void stmxcsr(u_int *csr);
153 void xrstor(char *addr, uint64_t mask);
154 void xsave(char *addr, uint64_t mask);
155 void xsaveopt(char *addr, uint64_t mask);
156 #endif
157
158 #endif /* __GNUCLIKE_ASM && !lint */
159
160 #ifdef XEN
161 #define start_emulating() (HYPERVISOR_fpu_taskswitch(1))
162 #define stop_emulating() (HYPERVISOR_fpu_taskswitch(0))
163 #else
164 #define start_emulating() load_cr0(rcr0() | CR0_TS)
165 #define stop_emulating() clts()
166 #endif
167
168 #ifdef CPU_ENABLE_SSE
169 #define GET_FPU_CW(thread) \
170 (cpu_fxsr ? \
171 (thread)->td_pcb->pcb_save->sv_xmm.sv_env.en_cw : \
172 (thread)->td_pcb->pcb_save->sv_87.sv_env.en_cw)
173 #define GET_FPU_SW(thread) \
174 (cpu_fxsr ? \
175 (thread)->td_pcb->pcb_save->sv_xmm.sv_env.en_sw : \
176 (thread)->td_pcb->pcb_save->sv_87.sv_env.en_sw)
177 #define SET_FPU_CW(savefpu, value) do { \
178 if (cpu_fxsr) \
179 (savefpu)->sv_xmm.sv_env.en_cw = (value); \
180 else \
181 (savefpu)->sv_87.sv_env.en_cw = (value); \
182 } while (0)
183 #else /* CPU_ENABLE_SSE */
184 #define GET_FPU_CW(thread) \
185 (thread->td_pcb->pcb_save->sv_87.sv_env.en_cw)
186 #define GET_FPU_SW(thread) \
187 (thread->td_pcb->pcb_save->sv_87.sv_env.en_sw)
188 #define SET_FPU_CW(savefpu, value) \
189 (savefpu)->sv_87.sv_env.en_cw = (value)
190 #endif /* CPU_ENABLE_SSE */
191
192 #ifdef CPU_ENABLE_SSE
193 CTASSERT(sizeof(union savefpu) == 512);
194 CTASSERT(sizeof(struct xstate_hdr) == 64);
195 CTASSERT(sizeof(struct savefpu_ymm) == 832);
196
197 /*
198 * This requirement is to make it easier for asm code to calculate
199 * offset of the fpu save area from the pcb address. FPU save area
200 * must be 64-byte aligned.
201 */
202 CTASSERT(sizeof(struct pcb) % XSAVE_AREA_ALIGN == 0);
203
204 /*
205 * Ensure the copy of XCR0 saved in a core is contained in the padding
206 * area.
207 */
208 CTASSERT(X86_XSTATE_XCR0_OFFSET >= offsetof(struct savexmm, sv_pad) &&
209 X86_XSTATE_XCR0_OFFSET + sizeof(uint64_t) <= sizeof(struct savexmm));
210
211 static void fpu_clean_state(void);
212 #endif
213
214 static void fpusave(union savefpu *);
215 static void fpurstor(union savefpu *);
216
217 int hw_float;
218
219 SYSCTL_INT(_hw, HW_FLOATINGPT, floatingpoint, CTLFLAG_RD,
220 &hw_float, 0, "Floating point instructions executed in hardware");
221
222 #ifdef CPU_ENABLE_SSE
223 int use_xsave;
224 uint64_t xsave_mask;
225 #endif
226 static uma_zone_t fpu_save_area_zone;
227 static union savefpu *npx_initialstate;
228
229 #ifdef CPU_ENABLE_SSE
230 struct xsave_area_elm_descr {
231 u_int offset;
232 u_int size;
233 } *xsave_area_desc;
234
235 static int use_xsaveopt;
236 #endif
237
238 static volatile u_int npx_traps_while_probing;
239
240 alias_for_inthand_t probetrap;
241 __asm(" \n\
242 .text \n\
243 .p2align 2,0x90 \n\
244 .type " __XSTRING(CNAME(probetrap)) ",@function \n\
245 " __XSTRING(CNAME(probetrap)) ": \n\
246 ss \n\
247 incl " __XSTRING(CNAME(npx_traps_while_probing)) " \n\
248 fnclex \n\
249 iret \n\
250 ");
251
252 /*
253 * Determine if an FPU is present and how to use it.
254 */
255 static int
256 npx_probe(void)
257 {
258 struct gate_descriptor save_idt_npxtrap;
259 u_short control, status;
260
261 /*
262 * Modern CPUs all have an FPU that uses the INT16 interface
263 * and provide a simple way to verify that, so handle the
264 * common case right away.
265 */
266 if (cpu_feature & CPUID_FPU) {
267 hw_float = 1;
268 return (1);
269 }
270
271 save_idt_npxtrap = idt[IDT_MF];
272 setidt(IDT_MF, probetrap, SDT_SYS386TGT, SEL_KPL,
273 GSEL(GCODE_SEL, SEL_KPL));
274
275 /*
276 * Don't trap while we're probing.
277 */
278 stop_emulating();
279
280 /*
281 * Finish resetting the coprocessor, if any. If there is an error
282 * pending, then we may get a bogus IRQ13, but npx_intr() will handle
283 * it OK. Bogus halts have never been observed, but we enabled
284 * IRQ13 and cleared the BUSY# latch early to handle them anyway.
285 */
286 fninit();
287
288 /*
289 * Don't use fwait here because it might hang.
290 * Don't use fnop here because it usually hangs if there is no FPU.
291 */
292 DELAY(1000); /* wait for any IRQ13 */
293 #ifdef DIAGNOSTIC
294 if (npx_traps_while_probing != 0)
295 printf("fninit caused %u bogus npx trap(s)\n",
296 npx_traps_while_probing);
297 #endif
298 /*
299 * Check for a status of mostly zero.
300 */
301 status = 0x5a5a;
302 fnstsw(&status);
303 if ((status & 0xb8ff) == 0) {
304 /*
305 * Good, now check for a proper control word.
306 */
307 control = 0x5a5a;
308 fnstcw(&control);
309 if ((control & 0x1f3f) == 0x033f) {
310 /*
311 * We have an npx, now divide by 0 to see if exception
312 * 16 works.
313 */
314 control &= ~(1 << 2); /* enable divide by 0 trap */
315 fldcw(control);
316 #ifdef FPU_ERROR_BROKEN
317 /*
318 * FPU error signal doesn't work on some CPU
319 * accelerator board.
320 */
321 hw_float = 1;
322 return (1);
323 #endif
324 npx_traps_while_probing = 0;
325 fp_divide_by_0();
326 if (npx_traps_while_probing != 0) {
327 /*
328 * Good, exception 16 works.
329 */
330 hw_float = 1;
331 goto cleanup;
332 }
333 printf(
334 "FPU does not use exception 16 for error reporting\n");
335 goto cleanup;
336 }
337 }
338
339 /*
340 * Probe failed. Floating point simply won't work.
341 * Notify user and disable FPU/MMX/SSE instruction execution.
342 */
343 printf("WARNING: no FPU!\n");
344 __asm __volatile("smsw %%ax; orb %0,%%al; lmsw %%ax" : :
345 "n" (CR0_EM | CR0_MP) : "ax");
346
347 cleanup:
348 idt[IDT_MF] = save_idt_npxtrap;
349 return (hw_float);
350 }
351
352 #ifdef CPU_ENABLE_SSE
353 /*
354 * Enable XSAVE if supported and allowed by user.
355 * Calculate the xsave_mask.
356 */
357 static void
358 npxinit_bsp1(void)
359 {
360 u_int cp[4];
361 uint64_t xsave_mask_user;
362
363 if (cpu_fxsr && (cpu_feature2 & CPUID2_XSAVE) != 0) {
364 use_xsave = 1;
365 TUNABLE_INT_FETCH("hw.use_xsave", &use_xsave);
366 }
367 if (!use_xsave)
368 return;
369
370 cpuid_count(0xd, 0x0, cp);
371 xsave_mask = XFEATURE_ENABLED_X87 | XFEATURE_ENABLED_SSE;
372 if ((cp[0] & xsave_mask) != xsave_mask)
373 panic("CPU0 does not support X87 or SSE: %x", cp[0]);
374 xsave_mask = ((uint64_t)cp[3] << 32) | cp[0];
375 xsave_mask_user = xsave_mask;
376 TUNABLE_QUAD_FETCH("hw.xsave_mask", &xsave_mask_user);
377 xsave_mask_user |= XFEATURE_ENABLED_X87 | XFEATURE_ENABLED_SSE;
378 xsave_mask &= xsave_mask_user;
379 if ((xsave_mask & XFEATURE_AVX512) != XFEATURE_AVX512)
380 xsave_mask &= ~XFEATURE_AVX512;
381 if ((xsave_mask & XFEATURE_MPX) != XFEATURE_MPX)
382 xsave_mask &= ~XFEATURE_MPX;
383
384 cpuid_count(0xd, 0x1, cp);
385 if ((cp[0] & CPUID_EXTSTATE_XSAVEOPT) != 0)
386 use_xsaveopt = 1;
387 }
388 #endif
389 /*
390
391 * Calculate the fpu save area size.
392 */
393 static void
394 npxinit_bsp2(void)
395 {
396 #ifdef CPU_ENABLE_SSE
397 u_int cp[4];
398
399 if (use_xsave) {
400 cpuid_count(0xd, 0x0, cp);
401 cpu_max_ext_state_size = cp[1];
402
403 /*
404 * Reload the cpu_feature2, since we enabled OSXSAVE.
405 */
406 do_cpuid(1, cp);
407 cpu_feature2 = cp[2];
408 } else
409 #endif
410 cpu_max_ext_state_size = sizeof(union savefpu);
411 }
412
413 /*
414 * Initialize floating point unit.
415 */
416 void
417 npxinit(bool bsp)
418 {
419 static union savefpu dummy;
420 register_t saveintr;
421 #ifdef CPU_ENABLE_SSE
422 u_int mxcsr;
423 #endif
424 u_short control;
425
426 if (bsp) {
427 if (!npx_probe())
428 return;
429 #ifdef CPU_ENABLE_SSE
430 npxinit_bsp1();
431 #endif
432 }
433
434 #ifdef CPU_ENABLE_SSE
435 if (use_xsave) {
436 load_cr4(rcr4() | CR4_XSAVE);
437 load_xcr(XCR0, xsave_mask);
438 }
439 #endif
440
441 /*
442 * XCR0 shall be set up before CPU can report the save area size.
443 */
444 if (bsp)
445 npxinit_bsp2();
446
447 /*
448 * fninit has the same h/w bugs as fnsave. Use the detoxified
449 * fnsave to throw away any junk in the fpu. fpusave() initializes
450 * the fpu.
451 *
452 * It is too early for critical_enter() to work on AP.
453 */
454 saveintr = intr_disable();
455 stop_emulating();
456 #ifdef CPU_ENABLE_SSE
457 if (cpu_fxsr)
458 fninit();
459 else
460 #endif
461 fnsave(&dummy);
462 control = __INITIAL_NPXCW__;
463 fldcw(control);
464 #ifdef CPU_ENABLE_SSE
465 if (cpu_fxsr) {
466 mxcsr = __INITIAL_MXCSR__;
467 ldmxcsr(mxcsr);
468 }
469 #endif
470 start_emulating();
471 intr_restore(saveintr);
472 }
473
474 /*
475 * On the boot CPU we generate a clean state that is used to
476 * initialize the floating point unit when it is first used by a
477 * process.
478 */
479 static void
480 npxinitstate(void *arg __unused)
481 {
482 register_t saveintr;
483 #ifdef CPU_ENABLE_SSE
484 int cp[4], i, max_ext_n;
485 #endif
486
487 if (!hw_float)
488 return;
489
490 npx_initialstate = malloc(cpu_max_ext_state_size, M_DEVBUF,
491 M_WAITOK | M_ZERO);
492 saveintr = intr_disable();
493 stop_emulating();
494
495 fpusave(npx_initialstate);
496 #ifdef CPU_ENABLE_SSE
497 if (cpu_fxsr) {
498 if (npx_initialstate->sv_xmm.sv_env.en_mxcsr_mask)
499 cpu_mxcsr_mask =
500 npx_initialstate->sv_xmm.sv_env.en_mxcsr_mask;
501 else
502 cpu_mxcsr_mask = 0xFFBF;
503
504 /*
505 * The fninit instruction does not modify XMM
506 * registers. The fpusave call dumped the garbage
507 * contained in the registers after reset to the
508 * initial state saved. Clear XMM registers file
509 * image to make the startup program state and signal
510 * handler XMM register content predictable.
511 */
512 bzero(npx_initialstate->sv_xmm.sv_fp,
513 sizeof(npx_initialstate->sv_xmm.sv_fp));
514 bzero(npx_initialstate->sv_xmm.sv_xmm,
515 sizeof(npx_initialstate->sv_xmm.sv_xmm));
516 } else
517 #endif
518 bzero(npx_initialstate->sv_87.sv_ac,
519 sizeof(npx_initialstate->sv_87.sv_ac));
520
521 #ifdef CPU_ENABLE_SSE
522 /*
523 * Create a table describing the layout of the CPU Extended
524 * Save Area.
525 */
526 if (use_xsave) {
527 if (xsave_mask >> 32 != 0)
528 max_ext_n = fls(xsave_mask >> 32) + 32;
529 else
530 max_ext_n = fls(xsave_mask);
531 xsave_area_desc = malloc(max_ext_n * sizeof(struct
532 xsave_area_elm_descr), M_DEVBUF, M_WAITOK | M_ZERO);
533 /* x87 state */
534 xsave_area_desc[0].offset = 0;
535 xsave_area_desc[0].size = 160;
536 /* XMM */
537 xsave_area_desc[1].offset = 160;
538 xsave_area_desc[1].size = 288 - 160;
539
540 for (i = 2; i < max_ext_n; i++) {
541 cpuid_count(0xd, i, cp);
542 xsave_area_desc[i].offset = cp[1];
543 xsave_area_desc[i].size = cp[0];
544 }
545 }
546 #endif
547
548 fpu_save_area_zone = uma_zcreate("FPU_save_area",
549 cpu_max_ext_state_size, NULL, NULL, NULL, NULL,
550 XSAVE_AREA_ALIGN - 1, 0);
551
552 start_emulating();
553 intr_restore(saveintr);
554 }
555 SYSINIT(npxinitstate, SI_SUB_DRIVERS, SI_ORDER_ANY, npxinitstate, NULL);
556
557 /*
558 * Free coprocessor (if we have it).
559 */
560 void
561 npxexit(td)
562 struct thread *td;
563 {
564
565 critical_enter();
566 if (curthread == PCPU_GET(fpcurthread)) {
567 stop_emulating();
568 fpusave(curpcb->pcb_save);
569 start_emulating();
570 PCPU_SET(fpcurthread, NULL);
571 }
572 critical_exit();
573 #ifdef NPX_DEBUG
574 if (hw_float) {
575 u_int masked_exceptions;
576
577 masked_exceptions = GET_FPU_CW(td) & GET_FPU_SW(td) & 0x7f;
578 /*
579 * Log exceptions that would have trapped with the old
580 * control word (overflow, divide by 0, and invalid operand).
581 */
582 if (masked_exceptions & 0x0d)
583 log(LOG_ERR,
584 "pid %d (%s) exited with masked floating point exceptions 0x%02x\n",
585 td->td_proc->p_pid, td->td_proc->p_comm,
586 masked_exceptions);
587 }
588 #endif
589 }
590
591 int
592 npxformat()
593 {
594
595 if (!hw_float)
596 return (_MC_FPFMT_NODEV);
597 #ifdef CPU_ENABLE_SSE
598 if (cpu_fxsr)
599 return (_MC_FPFMT_XMM);
600 #endif
601 return (_MC_FPFMT_387);
602 }
603
604 /*
605 * The following mechanism is used to ensure that the FPE_... value
606 * that is passed as a trapcode to the signal handler of the user
607 * process does not have more than one bit set.
608 *
609 * Multiple bits may be set if the user process modifies the control
610 * word while a status word bit is already set. While this is a sign
611 * of bad coding, we have no choise than to narrow them down to one
612 * bit, since we must not send a trapcode that is not exactly one of
613 * the FPE_ macros.
614 *
615 * The mechanism has a static table with 127 entries. Each combination
616 * of the 7 FPU status word exception bits directly translates to a
617 * position in this table, where a single FPE_... value is stored.
618 * This FPE_... value stored there is considered the "most important"
619 * of the exception bits and will be sent as the signal code. The
620 * precedence of the bits is based upon Intel Document "Numerical
621 * Applications", Chapter "Special Computational Situations".
622 *
623 * The macro to choose one of these values does these steps: 1) Throw
624 * away status word bits that cannot be masked. 2) Throw away the bits
625 * currently masked in the control word, assuming the user isn't
626 * interested in them anymore. 3) Reinsert status word bit 7 (stack
627 * fault) if it is set, which cannot be masked but must be presered.
628 * 4) Use the remaining bits to point into the trapcode table.
629 *
630 * The 6 maskable bits in order of their preference, as stated in the
631 * above referenced Intel manual:
632 * 1 Invalid operation (FP_X_INV)
633 * 1a Stack underflow
634 * 1b Stack overflow
635 * 1c Operand of unsupported format
636 * 1d SNaN operand.
637 * 2 QNaN operand (not an exception, irrelavant here)
638 * 3 Any other invalid-operation not mentioned above or zero divide
639 * (FP_X_INV, FP_X_DZ)
640 * 4 Denormal operand (FP_X_DNML)
641 * 5 Numeric over/underflow (FP_X_OFL, FP_X_UFL)
642 * 6 Inexact result (FP_X_IMP)
643 */
644 static char fpetable[128] = {
645 0,
646 FPE_FLTINV, /* 1 - INV */
647 FPE_FLTUND, /* 2 - DNML */
648 FPE_FLTINV, /* 3 - INV | DNML */
649 FPE_FLTDIV, /* 4 - DZ */
650 FPE_FLTINV, /* 5 - INV | DZ */
651 FPE_FLTDIV, /* 6 - DNML | DZ */
652 FPE_FLTINV, /* 7 - INV | DNML | DZ */
653 FPE_FLTOVF, /* 8 - OFL */
654 FPE_FLTINV, /* 9 - INV | OFL */
655 FPE_FLTUND, /* A - DNML | OFL */
656 FPE_FLTINV, /* B - INV | DNML | OFL */
657 FPE_FLTDIV, /* C - DZ | OFL */
658 FPE_FLTINV, /* D - INV | DZ | OFL */
659 FPE_FLTDIV, /* E - DNML | DZ | OFL */
660 FPE_FLTINV, /* F - INV | DNML | DZ | OFL */
661 FPE_FLTUND, /* 10 - UFL */
662 FPE_FLTINV, /* 11 - INV | UFL */
663 FPE_FLTUND, /* 12 - DNML | UFL */
664 FPE_FLTINV, /* 13 - INV | DNML | UFL */
665 FPE_FLTDIV, /* 14 - DZ | UFL */
666 FPE_FLTINV, /* 15 - INV | DZ | UFL */
667 FPE_FLTDIV, /* 16 - DNML | DZ | UFL */
668 FPE_FLTINV, /* 17 - INV | DNML | DZ | UFL */
669 FPE_FLTOVF, /* 18 - OFL | UFL */
670 FPE_FLTINV, /* 19 - INV | OFL | UFL */
671 FPE_FLTUND, /* 1A - DNML | OFL | UFL */
672 FPE_FLTINV, /* 1B - INV | DNML | OFL | UFL */
673 FPE_FLTDIV, /* 1C - DZ | OFL | UFL */
674 FPE_FLTINV, /* 1D - INV | DZ | OFL | UFL */
675 FPE_FLTDIV, /* 1E - DNML | DZ | OFL | UFL */
676 FPE_FLTINV, /* 1F - INV | DNML | DZ | OFL | UFL */
677 FPE_FLTRES, /* 20 - IMP */
678 FPE_FLTINV, /* 21 - INV | IMP */
679 FPE_FLTUND, /* 22 - DNML | IMP */
680 FPE_FLTINV, /* 23 - INV | DNML | IMP */
681 FPE_FLTDIV, /* 24 - DZ | IMP */
682 FPE_FLTINV, /* 25 - INV | DZ | IMP */
683 FPE_FLTDIV, /* 26 - DNML | DZ | IMP */
684 FPE_FLTINV, /* 27 - INV | DNML | DZ | IMP */
685 FPE_FLTOVF, /* 28 - OFL | IMP */
686 FPE_FLTINV, /* 29 - INV | OFL | IMP */
687 FPE_FLTUND, /* 2A - DNML | OFL | IMP */
688 FPE_FLTINV, /* 2B - INV | DNML | OFL | IMP */
689 FPE_FLTDIV, /* 2C - DZ | OFL | IMP */
690 FPE_FLTINV, /* 2D - INV | DZ | OFL | IMP */
691 FPE_FLTDIV, /* 2E - DNML | DZ | OFL | IMP */
692 FPE_FLTINV, /* 2F - INV | DNML | DZ | OFL | IMP */
693 FPE_FLTUND, /* 30 - UFL | IMP */
694 FPE_FLTINV, /* 31 - INV | UFL | IMP */
695 FPE_FLTUND, /* 32 - DNML | UFL | IMP */
696 FPE_FLTINV, /* 33 - INV | DNML | UFL | IMP */
697 FPE_FLTDIV, /* 34 - DZ | UFL | IMP */
698 FPE_FLTINV, /* 35 - INV | DZ | UFL | IMP */
699 FPE_FLTDIV, /* 36 - DNML | DZ | UFL | IMP */
700 FPE_FLTINV, /* 37 - INV | DNML | DZ | UFL | IMP */
701 FPE_FLTOVF, /* 38 - OFL | UFL | IMP */
702 FPE_FLTINV, /* 39 - INV | OFL | UFL | IMP */
703 FPE_FLTUND, /* 3A - DNML | OFL | UFL | IMP */
704 FPE_FLTINV, /* 3B - INV | DNML | OFL | UFL | IMP */
705 FPE_FLTDIV, /* 3C - DZ | OFL | UFL | IMP */
706 FPE_FLTINV, /* 3D - INV | DZ | OFL | UFL | IMP */
707 FPE_FLTDIV, /* 3E - DNML | DZ | OFL | UFL | IMP */
708 FPE_FLTINV, /* 3F - INV | DNML | DZ | OFL | UFL | IMP */
709 FPE_FLTSUB, /* 40 - STK */
710 FPE_FLTSUB, /* 41 - INV | STK */
711 FPE_FLTUND, /* 42 - DNML | STK */
712 FPE_FLTSUB, /* 43 - INV | DNML | STK */
713 FPE_FLTDIV, /* 44 - DZ | STK */
714 FPE_FLTSUB, /* 45 - INV | DZ | STK */
715 FPE_FLTDIV, /* 46 - DNML | DZ | STK */
716 FPE_FLTSUB, /* 47 - INV | DNML | DZ | STK */
717 FPE_FLTOVF, /* 48 - OFL | STK */
718 FPE_FLTSUB, /* 49 - INV | OFL | STK */
719 FPE_FLTUND, /* 4A - DNML | OFL | STK */
720 FPE_FLTSUB, /* 4B - INV | DNML | OFL | STK */
721 FPE_FLTDIV, /* 4C - DZ | OFL | STK */
722 FPE_FLTSUB, /* 4D - INV | DZ | OFL | STK */
723 FPE_FLTDIV, /* 4E - DNML | DZ | OFL | STK */
724 FPE_FLTSUB, /* 4F - INV | DNML | DZ | OFL | STK */
725 FPE_FLTUND, /* 50 - UFL | STK */
726 FPE_FLTSUB, /* 51 - INV | UFL | STK */
727 FPE_FLTUND, /* 52 - DNML | UFL | STK */
728 FPE_FLTSUB, /* 53 - INV | DNML | UFL | STK */
729 FPE_FLTDIV, /* 54 - DZ | UFL | STK */
730 FPE_FLTSUB, /* 55 - INV | DZ | UFL | STK */
731 FPE_FLTDIV, /* 56 - DNML | DZ | UFL | STK */
732 FPE_FLTSUB, /* 57 - INV | DNML | DZ | UFL | STK */
733 FPE_FLTOVF, /* 58 - OFL | UFL | STK */
734 FPE_FLTSUB, /* 59 - INV | OFL | UFL | STK */
735 FPE_FLTUND, /* 5A - DNML | OFL | UFL | STK */
736 FPE_FLTSUB, /* 5B - INV | DNML | OFL | UFL | STK */
737 FPE_FLTDIV, /* 5C - DZ | OFL | UFL | STK */
738 FPE_FLTSUB, /* 5D - INV | DZ | OFL | UFL | STK */
739 FPE_FLTDIV, /* 5E - DNML | DZ | OFL | UFL | STK */
740 FPE_FLTSUB, /* 5F - INV | DNML | DZ | OFL | UFL | STK */
741 FPE_FLTRES, /* 60 - IMP | STK */
742 FPE_FLTSUB, /* 61 - INV | IMP | STK */
743 FPE_FLTUND, /* 62 - DNML | IMP | STK */
744 FPE_FLTSUB, /* 63 - INV | DNML | IMP | STK */
745 FPE_FLTDIV, /* 64 - DZ | IMP | STK */
746 FPE_FLTSUB, /* 65 - INV | DZ | IMP | STK */
747 FPE_FLTDIV, /* 66 - DNML | DZ | IMP | STK */
748 FPE_FLTSUB, /* 67 - INV | DNML | DZ | IMP | STK */
749 FPE_FLTOVF, /* 68 - OFL | IMP | STK */
750 FPE_FLTSUB, /* 69 - INV | OFL | IMP | STK */
751 FPE_FLTUND, /* 6A - DNML | OFL | IMP | STK */
752 FPE_FLTSUB, /* 6B - INV | DNML | OFL | IMP | STK */
753 FPE_FLTDIV, /* 6C - DZ | OFL | IMP | STK */
754 FPE_FLTSUB, /* 6D - INV | DZ | OFL | IMP | STK */
755 FPE_FLTDIV, /* 6E - DNML | DZ | OFL | IMP | STK */
756 FPE_FLTSUB, /* 6F - INV | DNML | DZ | OFL | IMP | STK */
757 FPE_FLTUND, /* 70 - UFL | IMP | STK */
758 FPE_FLTSUB, /* 71 - INV | UFL | IMP | STK */
759 FPE_FLTUND, /* 72 - DNML | UFL | IMP | STK */
760 FPE_FLTSUB, /* 73 - INV | DNML | UFL | IMP | STK */
761 FPE_FLTDIV, /* 74 - DZ | UFL | IMP | STK */
762 FPE_FLTSUB, /* 75 - INV | DZ | UFL | IMP | STK */
763 FPE_FLTDIV, /* 76 - DNML | DZ | UFL | IMP | STK */
764 FPE_FLTSUB, /* 77 - INV | DNML | DZ | UFL | IMP | STK */
765 FPE_FLTOVF, /* 78 - OFL | UFL | IMP | STK */
766 FPE_FLTSUB, /* 79 - INV | OFL | UFL | IMP | STK */
767 FPE_FLTUND, /* 7A - DNML | OFL | UFL | IMP | STK */
768 FPE_FLTSUB, /* 7B - INV | DNML | OFL | UFL | IMP | STK */
769 FPE_FLTDIV, /* 7C - DZ | OFL | UFL | IMP | STK */
770 FPE_FLTSUB, /* 7D - INV | DZ | OFL | UFL | IMP | STK */
771 FPE_FLTDIV, /* 7E - DNML | DZ | OFL | UFL | IMP | STK */
772 FPE_FLTSUB, /* 7F - INV | DNML | DZ | OFL | UFL | IMP | STK */
773 };
774
775 /*
776 * Read the FP status and control words, then generate si_code value
777 * for SIGFPE. The error code chosen will be one of the
778 * FPE_... macros. It will be sent as the second argument to old
779 * BSD-style signal handlers and as "siginfo_t->si_code" (second
780 * argument) to SA_SIGINFO signal handlers.
781 *
782 * Some time ago, we cleared the x87 exceptions with FNCLEX there.
783 * Clearing exceptions was necessary mainly to avoid IRQ13 bugs. The
784 * usermode code which understands the FPU hardware enough to enable
785 * the exceptions, can also handle clearing the exception state in the
786 * handler. The only consequence of not clearing the exception is the
787 * rethrow of the SIGFPE on return from the signal handler and
788 * reexecution of the corresponding instruction.
789 *
790 * For XMM traps, the exceptions were never cleared.
791 */
792 int
793 npxtrap_x87(void)
794 {
795 u_short control, status;
796
797 if (!hw_float) {
798 printf(
799 "npxtrap_x87: fpcurthread = %p, curthread = %p, hw_float = %d\n",
800 PCPU_GET(fpcurthread), curthread, hw_float);
801 panic("npxtrap from nowhere");
802 }
803 critical_enter();
804
805 /*
806 * Interrupt handling (for another interrupt) may have pushed the
807 * state to memory. Fetch the relevant parts of the state from
808 * wherever they are.
809 */
810 if (PCPU_GET(fpcurthread) != curthread) {
811 control = GET_FPU_CW(curthread);
812 status = GET_FPU_SW(curthread);
813 } else {
814 fnstcw(&control);
815 fnstsw(&status);
816 }
817 critical_exit();
818 return (fpetable[status & ((~control & 0x3f) | 0x40)]);
819 }
820
821 #ifdef CPU_ENABLE_SSE
822 int
823 npxtrap_sse(void)
824 {
825 u_int mxcsr;
826
827 if (!hw_float) {
828 printf(
829 "npxtrap_sse: fpcurthread = %p, curthread = %p, hw_float = %d\n",
830 PCPU_GET(fpcurthread), curthread, hw_float);
831 panic("npxtrap from nowhere");
832 }
833 critical_enter();
834 if (PCPU_GET(fpcurthread) != curthread)
835 mxcsr = curthread->td_pcb->pcb_save->sv_xmm.sv_env.en_mxcsr;
836 else
837 stmxcsr(&mxcsr);
838 critical_exit();
839 return (fpetable[(mxcsr & (~mxcsr >> 7)) & 0x3f]);
840 }
841 #endif
842
843 /*
844 * Implement device not available (DNA) exception
845 *
846 * It would be better to switch FP context here (if curthread != fpcurthread)
847 * and not necessarily for every context switch, but it is too hard to
848 * access foreign pcb's.
849 */
850
851 static int err_count = 0;
852
853 int
854 npxdna(void)
855 {
856
857 if (!hw_float)
858 return (0);
859 critical_enter();
860 if (PCPU_GET(fpcurthread) == curthread) {
861 printf("npxdna: fpcurthread == curthread %d times\n",
862 ++err_count);
863 stop_emulating();
864 critical_exit();
865 return (1);
866 }
867 if (PCPU_GET(fpcurthread) != NULL) {
868 printf("npxdna: fpcurthread = %p (%d), curthread = %p (%d)\n",
869 PCPU_GET(fpcurthread),
870 PCPU_GET(fpcurthread)->td_proc->p_pid,
871 curthread, curthread->td_proc->p_pid);
872 panic("npxdna");
873 }
874 stop_emulating();
875 /*
876 * Record new context early in case frstor causes a trap.
877 */
878 PCPU_SET(fpcurthread, curthread);
879
880 #ifdef CPU_ENABLE_SSE
881 if (cpu_fxsr)
882 fpu_clean_state();
883 #endif
884
885 if ((curpcb->pcb_flags & PCB_NPXINITDONE) == 0) {
886 /*
887 * This is the first time this thread has used the FPU or
888 * the PCB doesn't contain a clean FPU state. Explicitly
889 * load an initial state.
890 *
891 * We prefer to restore the state from the actual save
892 * area in PCB instead of directly loading from
893 * npx_initialstate, to ignite the XSAVEOPT
894 * tracking engine.
895 */
896 bcopy(npx_initialstate, curpcb->pcb_save, cpu_max_ext_state_size);
897 fpurstor(curpcb->pcb_save);
898 if (curpcb->pcb_initial_npxcw != __INITIAL_NPXCW__)
899 fldcw(curpcb->pcb_initial_npxcw);
900 curpcb->pcb_flags |= PCB_NPXINITDONE;
901 if (PCB_USER_FPU(curpcb))
902 curpcb->pcb_flags |= PCB_NPXUSERINITDONE;
903 } else {
904 fpurstor(curpcb->pcb_save);
905 }
906 critical_exit();
907
908 return (1);
909 }
910
911 /*
912 * Wrapper for fpusave() called from context switch routines.
913 *
914 * npxsave() must be called with interrupts disabled, so that it clears
915 * fpcurthread atomically with saving the state. We require callers to do the
916 * disabling, since most callers need to disable interrupts anyway to call
917 * npxsave() atomically with checking fpcurthread.
918 */
919 void
920 npxsave(addr)
921 union savefpu *addr;
922 {
923
924 stop_emulating();
925 #ifdef CPU_ENABLE_SSE
926 if (use_xsaveopt)
927 xsaveopt((char *)addr, xsave_mask);
928 else
929 #endif
930 fpusave(addr);
931 start_emulating();
932 PCPU_SET(fpcurthread, NULL);
933 }
934
935 /*
936 * Unconditionally save the current co-processor state across suspend and
937 * resume.
938 */
939 void
940 npxsuspend(union savefpu *addr)
941 {
942 register_t cr0;
943
944 if (!hw_float)
945 return;
946 if (PCPU_GET(fpcurthread) == NULL) {
947 bcopy(npx_initialstate, addr, cpu_max_ext_state_size);
948 return;
949 }
950 cr0 = rcr0();
951 stop_emulating();
952 fpusave(addr);
953 load_cr0(cr0);
954 }
955
956 void
957 npxresume(union savefpu *addr)
958 {
959 register_t cr0;
960
961 if (!hw_float)
962 return;
963
964 cr0 = rcr0();
965 npxinit(false);
966 stop_emulating();
967 fpurstor(addr);
968 load_cr0(cr0);
969 }
970
971 void
972 npxdrop()
973 {
974 struct thread *td;
975
976 /*
977 * Discard pending exceptions in the !cpu_fxsr case so that unmasked
978 * ones don't cause a panic on the next frstor.
979 */
980 #ifdef CPU_ENABLE_SSE
981 if (!cpu_fxsr)
982 #endif
983 fnclex();
984
985 td = PCPU_GET(fpcurthread);
986 KASSERT(td == curthread, ("fpudrop: fpcurthread != curthread"));
987 CRITICAL_ASSERT(td);
988 PCPU_SET(fpcurthread, NULL);
989 td->td_pcb->pcb_flags &= ~PCB_NPXINITDONE;
990 start_emulating();
991 }
992
993 /*
994 * Get the user state of the FPU into pcb->pcb_user_save without
995 * dropping ownership (if possible). It returns the FPU ownership
996 * status.
997 */
998 int
999 npxgetregs(struct thread *td)
1000 {
1001 struct pcb *pcb;
1002 #ifdef CPU_ENABLE_SSE
1003 uint64_t *xstate_bv, bit;
1004 char *sa;
1005 int max_ext_n, i;
1006 #endif
1007 int owned;
1008
1009 if (!hw_float)
1010 return (_MC_FPOWNED_NONE);
1011
1012 pcb = td->td_pcb;
1013 if ((pcb->pcb_flags & PCB_NPXINITDONE) == 0) {
1014 bcopy(npx_initialstate, get_pcb_user_save_pcb(pcb),
1015 cpu_max_ext_state_size);
1016 SET_FPU_CW(get_pcb_user_save_pcb(pcb), pcb->pcb_initial_npxcw);
1017 npxuserinited(td);
1018 return (_MC_FPOWNED_PCB);
1019 }
1020 critical_enter();
1021 if (td == PCPU_GET(fpcurthread)) {
1022 fpusave(get_pcb_user_save_pcb(pcb));
1023 #ifdef CPU_ENABLE_SSE
1024 if (!cpu_fxsr)
1025 #endif
1026 /*
1027 * fnsave initializes the FPU and destroys whatever
1028 * context it contains. Make sure the FPU owner
1029 * starts with a clean state next time.
1030 */
1031 npxdrop();
1032 owned = _MC_FPOWNED_FPU;
1033 } else {
1034 owned = _MC_FPOWNED_PCB;
1035 }
1036 critical_exit();
1037 #ifdef CPU_ENABLE_SSE
1038 if (use_xsave) {
1039 /*
1040 * Handle partially saved state.
1041 */
1042 sa = (char *)get_pcb_user_save_pcb(pcb);
1043 xstate_bv = (uint64_t *)(sa + sizeof(union savefpu) +
1044 offsetof(struct xstate_hdr, xstate_bv));
1045 if (xsave_mask >> 32 != 0)
1046 max_ext_n = fls(xsave_mask >> 32) + 32;
1047 else
1048 max_ext_n = fls(xsave_mask);
1049 for (i = 0; i < max_ext_n; i++) {
1050 bit = 1ULL << i;
1051 if ((xsave_mask & bit) == 0 || (*xstate_bv & bit) != 0)
1052 continue;
1053 bcopy((char *)npx_initialstate +
1054 xsave_area_desc[i].offset,
1055 sa + xsave_area_desc[i].offset,
1056 xsave_area_desc[i].size);
1057 *xstate_bv |= bit;
1058 }
1059 }
1060 #endif
1061 return (owned);
1062 }
1063
1064 void
1065 npxuserinited(struct thread *td)
1066 {
1067 struct pcb *pcb;
1068
1069 pcb = td->td_pcb;
1070 if (PCB_USER_FPU(pcb))
1071 pcb->pcb_flags |= PCB_NPXINITDONE;
1072 pcb->pcb_flags |= PCB_NPXUSERINITDONE;
1073 }
1074
1075 #ifdef CPU_ENABLE_SSE
1076 int
1077 npxsetxstate(struct thread *td, char *xfpustate, size_t xfpustate_size)
1078 {
1079 struct xstate_hdr *hdr, *ehdr;
1080 size_t len, max_len;
1081 uint64_t bv;
1082
1083 /* XXXKIB should we clear all extended state in xstate_bv instead ? */
1084 if (xfpustate == NULL)
1085 return (0);
1086 if (!use_xsave)
1087 return (EOPNOTSUPP);
1088
1089 len = xfpustate_size;
1090 if (len < sizeof(struct xstate_hdr))
1091 return (EINVAL);
1092 max_len = cpu_max_ext_state_size - sizeof(union savefpu);
1093 if (len > max_len)
1094 return (EINVAL);
1095
1096 ehdr = (struct xstate_hdr *)xfpustate;
1097 bv = ehdr->xstate_bv;
1098
1099 /*
1100 * Avoid #gp.
1101 */
1102 if (bv & ~xsave_mask)
1103 return (EINVAL);
1104
1105 hdr = (struct xstate_hdr *)(get_pcb_user_save_td(td) + 1);
1106
1107 hdr->xstate_bv = bv;
1108 bcopy(xfpustate + sizeof(struct xstate_hdr),
1109 (char *)(hdr + 1), len - sizeof(struct xstate_hdr));
1110
1111 return (0);
1112 }
1113 #endif
1114
1115 int
1116 npxsetregs(struct thread *td, union savefpu *addr, char *xfpustate,
1117 size_t xfpustate_size)
1118 {
1119 struct pcb *pcb;
1120 #ifdef CPU_ENABLE_SSE
1121 int error;
1122 #endif
1123
1124 if (!hw_float)
1125 return (ENXIO);
1126
1127 pcb = td->td_pcb;
1128 critical_enter();
1129 if (td == PCPU_GET(fpcurthread) && PCB_USER_FPU(pcb)) {
1130 #ifdef CPU_ENABLE_SSE
1131 error = npxsetxstate(td, xfpustate, xfpustate_size);
1132 if (error != 0) {
1133 critical_exit();
1134 return (error);
1135 }
1136 if (!cpu_fxsr)
1137 #endif
1138 fnclex(); /* As in npxdrop(). */
1139 bcopy(addr, get_pcb_user_save_td(td), sizeof(*addr));
1140 fpurstor(get_pcb_user_save_td(td));
1141 critical_exit();
1142 pcb->pcb_flags |= PCB_NPXUSERINITDONE | PCB_NPXINITDONE;
1143 } else {
1144 critical_exit();
1145 #ifdef CPU_ENABLE_SSE
1146 error = npxsetxstate(td, xfpustate, xfpustate_size);
1147 if (error != 0)
1148 return (error);
1149 #endif
1150 bcopy(addr, get_pcb_user_save_td(td), sizeof(*addr));
1151 npxuserinited(td);
1152 }
1153 return (0);
1154 }
1155
1156 static void
1157 fpusave(addr)
1158 union savefpu *addr;
1159 {
1160
1161 #ifdef CPU_ENABLE_SSE
1162 if (use_xsave)
1163 xsave((char *)addr, xsave_mask);
1164 else if (cpu_fxsr)
1165 fxsave(addr);
1166 else
1167 #endif
1168 fnsave(addr);
1169 }
1170
1171 #ifdef CPU_ENABLE_SSE
1172 /*
1173 * On AuthenticAMD processors, the fxrstor instruction does not restore
1174 * the x87's stored last instruction pointer, last data pointer, and last
1175 * opcode values, except in the rare case in which the exception summary
1176 * (ES) bit in the x87 status word is set to 1.
1177 *
1178 * In order to avoid leaking this information across processes, we clean
1179 * these values by performing a dummy load before executing fxrstor().
1180 */
1181 static void
1182 fpu_clean_state(void)
1183 {
1184 static float dummy_variable = 0.0;
1185 u_short status;
1186
1187 /*
1188 * Clear the ES bit in the x87 status word if it is currently
1189 * set, in order to avoid causing a fault in the upcoming load.
1190 */
1191 fnstsw(&status);
1192 if (status & 0x80)
1193 fnclex();
1194
1195 /*
1196 * Load the dummy variable into the x87 stack. This mangles
1197 * the x87 stack, but we don't care since we're about to call
1198 * fxrstor() anyway.
1199 */
1200 __asm __volatile("ffree %%st(7); flds %0" : : "m" (dummy_variable));
1201 }
1202 #endif /* CPU_ENABLE_SSE */
1203
1204 static void
1205 fpurstor(addr)
1206 union savefpu *addr;
1207 {
1208
1209 #ifdef CPU_ENABLE_SSE
1210 if (use_xsave)
1211 xrstor((char *)addr, xsave_mask);
1212 else if (cpu_fxsr)
1213 fxrstor(addr);
1214 else
1215 #endif
1216 frstor(addr);
1217 }
1218
1219 #ifdef DEV_ISA
1220 /*
1221 * This sucks up the legacy ISA support assignments from PNPBIOS/ACPI.
1222 */
1223 static struct isa_pnp_id npxisa_ids[] = {
1224 { 0x040cd041, "Legacy ISA coprocessor support" }, /* PNP0C04 */
1225 { 0 }
1226 };
1227
1228 static int
1229 npxisa_probe(device_t dev)
1230 {
1231 int result;
1232 if ((result = ISA_PNP_PROBE(device_get_parent(dev), dev, npxisa_ids)) <= 0) {
1233 device_quiet(dev);
1234 }
1235 return(result);
1236 }
1237
1238 static int
1239 npxisa_attach(device_t dev)
1240 {
1241 return (0);
1242 }
1243
1244 static device_method_t npxisa_methods[] = {
1245 /* Device interface */
1246 DEVMETHOD(device_probe, npxisa_probe),
1247 DEVMETHOD(device_attach, npxisa_attach),
1248 DEVMETHOD(device_detach, bus_generic_detach),
1249 DEVMETHOD(device_shutdown, bus_generic_shutdown),
1250 DEVMETHOD(device_suspend, bus_generic_suspend),
1251 DEVMETHOD(device_resume, bus_generic_resume),
1252
1253 { 0, 0 }
1254 };
1255
1256 static driver_t npxisa_driver = {
1257 "npxisa",
1258 npxisa_methods,
1259 1, /* no softc */
1260 };
1261
1262 static devclass_t npxisa_devclass;
1263
1264 DRIVER_MODULE(npxisa, isa, npxisa_driver, npxisa_devclass, 0, 0);
1265 #ifndef PC98
1266 DRIVER_MODULE(npxisa, acpi, npxisa_driver, npxisa_devclass, 0, 0);
1267 #endif
1268 #endif /* DEV_ISA */
1269
1270 static MALLOC_DEFINE(M_FPUKERN_CTX, "fpukern_ctx",
1271 "Kernel contexts for FPU state");
1272
1273 #define FPU_KERN_CTX_NPXINITDONE 0x01
1274 #define FPU_KERN_CTX_DUMMY 0x02
1275
1276 struct fpu_kern_ctx {
1277 union savefpu *prev;
1278 uint32_t flags;
1279 char hwstate1[];
1280 };
1281
1282 struct fpu_kern_ctx *
1283 fpu_kern_alloc_ctx(u_int flags)
1284 {
1285 struct fpu_kern_ctx *res;
1286 size_t sz;
1287
1288 sz = sizeof(struct fpu_kern_ctx) + XSAVE_AREA_ALIGN +
1289 cpu_max_ext_state_size;
1290 res = malloc(sz, M_FPUKERN_CTX, ((flags & FPU_KERN_NOWAIT) ?
1291 M_NOWAIT : M_WAITOK) | M_ZERO);
1292 return (res);
1293 }
1294
1295 void
1296 fpu_kern_free_ctx(struct fpu_kern_ctx *ctx)
1297 {
1298
1299 /* XXXKIB clear the memory ? */
1300 free(ctx, M_FPUKERN_CTX);
1301 }
1302
1303 static union savefpu *
1304 fpu_kern_ctx_savefpu(struct fpu_kern_ctx *ctx)
1305 {
1306 vm_offset_t p;
1307
1308 p = (vm_offset_t)&ctx->hwstate1;
1309 p = roundup2(p, XSAVE_AREA_ALIGN);
1310 return ((union savefpu *)p);
1311 }
1312
1313 int
1314 fpu_kern_enter(struct thread *td, struct fpu_kern_ctx *ctx, u_int flags)
1315 {
1316 struct pcb *pcb;
1317
1318 if ((flags & FPU_KERN_KTHR) != 0 && is_fpu_kern_thread(0)) {
1319 ctx->flags = FPU_KERN_CTX_DUMMY;
1320 return (0);
1321 }
1322 pcb = td->td_pcb;
1323 KASSERT(!PCB_USER_FPU(pcb) || pcb->pcb_save ==
1324 get_pcb_user_save_pcb(pcb), ("mangled pcb_save"));
1325 ctx->flags = 0;
1326 if ((pcb->pcb_flags & PCB_NPXINITDONE) != 0)
1327 ctx->flags |= FPU_KERN_CTX_NPXINITDONE;
1328 npxexit(td);
1329 ctx->prev = pcb->pcb_save;
1330 pcb->pcb_save = fpu_kern_ctx_savefpu(ctx);
1331 pcb->pcb_flags |= PCB_KERNNPX;
1332 pcb->pcb_flags &= ~PCB_NPXINITDONE;
1333 return (0);
1334 }
1335
1336 int
1337 fpu_kern_leave(struct thread *td, struct fpu_kern_ctx *ctx)
1338 {
1339 struct pcb *pcb;
1340
1341 if (is_fpu_kern_thread(0) && (ctx->flags & FPU_KERN_CTX_DUMMY) != 0)
1342 return (0);
1343 pcb = td->td_pcb;
1344 critical_enter();
1345 if (curthread == PCPU_GET(fpcurthread))
1346 npxdrop();
1347 critical_exit();
1348 pcb->pcb_save = ctx->prev;
1349 if (pcb->pcb_save == get_pcb_user_save_pcb(pcb)) {
1350 if ((pcb->pcb_flags & PCB_NPXUSERINITDONE) != 0)
1351 pcb->pcb_flags |= PCB_NPXINITDONE;
1352 else
1353 pcb->pcb_flags &= ~PCB_NPXINITDONE;
1354 pcb->pcb_flags &= ~PCB_KERNNPX;
1355 } else {
1356 if ((ctx->flags & FPU_KERN_CTX_NPXINITDONE) != 0)
1357 pcb->pcb_flags |= PCB_NPXINITDONE;
1358 else
1359 pcb->pcb_flags &= ~PCB_NPXINITDONE;
1360 KASSERT(!PCB_USER_FPU(pcb), ("unpaired fpu_kern_leave"));
1361 }
1362 return (0);
1363 }
1364
1365 int
1366 fpu_kern_thread(u_int flags)
1367 {
1368
1369 KASSERT((curthread->td_pflags & TDP_KTHREAD) != 0,
1370 ("Only kthread may use fpu_kern_thread"));
1371 KASSERT(curpcb->pcb_save == get_pcb_user_save_pcb(curpcb),
1372 ("mangled pcb_save"));
1373 KASSERT(PCB_USER_FPU(curpcb), ("recursive call"));
1374
1375 curpcb->pcb_flags |= PCB_KERNNPX;
1376 return (0);
1377 }
1378
1379 int
1380 is_fpu_kern_thread(u_int flags)
1381 {
1382
1383 if ((curthread->td_pflags & TDP_KTHREAD) == 0)
1384 return (0);
1385 return ((curpcb->pcb_flags & PCB_KERNNPX) != 0);
1386 }
1387
1388 /*
1389 * FPU save area alloc/free/init utility routines
1390 */
1391 union savefpu *
1392 fpu_save_area_alloc(void)
1393 {
1394
1395 return (uma_zalloc(fpu_save_area_zone, 0));
1396 }
1397
1398 void
1399 fpu_save_area_free(union savefpu *fsa)
1400 {
1401
1402 uma_zfree(fpu_save_area_zone, fsa);
1403 }
1404
1405 void
1406 fpu_save_area_reset(union savefpu *fsa)
1407 {
1408
1409 bcopy(npx_initialstate, fsa, cpu_max_ext_state_size);
1410 }
Cache object: 7acfaf6599945aad579ddc3e9749fdbc
|